Releases of export and import systems have to be identical

hi all,
we want PRD data on DEV , PRD client has been exported successfully. data ( 2 requests from cofile & data) from PRD copied to DEV in cofile and data.
now when we import these requests in DEV client through STMS , it say that "Releases of export and import systems have to be identical"
while oracle patch, kernel patch and java version all are same on both systems.
plz guide
Regards
Khan

Friends,
We also faced same issue while restoring USER Master backup in one of our system. Even after applying OSS Note 1291394 it didn't work for us. Though the permanent solution is to apply this OSS Note only.
As a teporary workaround we can add the TR through OS command using Uncoditional Mode "Overwrite Original" and import also using Uncoditional Mode "Overwrite Original". Below are the commands.
To Add in buffer:
tp addtobuffer <TR> SID Client=<> U012 pf=<>
To Import in system:
tp import <TR> SID U012 pf=<>
Regards,
Mukul SHarma

Similar Messages

Client Copy- releases of the export and import systems have to be identical

Hi All
I created a new client using the Remote Client Export \ import method (on the same system). The reason being is that I need a 2nd Test Client on the same system with a smaller data set for other testing purposes. As well as needing to re-import the same Testing Client after a future database restores from a different backup, and still needing the same small data set for testing after the restore whipped it out.
Now that the 2nd Clients data set has been used, I've been asked for a 3rd test client, the same as the 2nd originally was. (No problem I figured) So I created the 3rd Test Client (SCC4) and tried importing the same transport files as created the 2nd Test Client.
But I'm receiving the error message "Releases of the export and import systrems have to be identical".
I am on the same system as the originial client export was made from, so the SAP release is the same.
The only other thing I can think of is that we have imported some customizing transports from the Dev system into the original system since the export was taken.
Can anyone help? Is there anyway I can get this back?
Ken

Solution found: Note 1291394 - ERROR : TA194 When performing multiple imports in the same client.
I've imported the note, run the report as per instructions and I can happily say the Import is now running. Although it does seem to be taking a lot longer than it did for the original import.
Ken

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Exporting and importing table using R3trans program between 2 clients

Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
Suresh

This is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah

How to export and import dependent tables from 2 different schema

I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohit

worked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.

Error when exporting and importing TS

Hi I am running SCCM 2012 SP1 and am trying to export a Task Sequence including with the Windows 7 wim, the boot wim, some applications and drivers. When I exported the TS I selected to export dependencies and content.
I have setup dev SCCM environment (same spec as production) and am trying to import the .zip that was created when I completed the export. When doing the import I am getting the below error on both the Windows 7 wim and the boot wim :
Error Imported Operating System Image (1):
Create new Windows 7 Enterprise x64
Generic failure
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM file due
to error 80070003".
ErrorCode= 2147942403;
File="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\
\sspimagepackage.cpp";
Line = 483;
Operation = "Putinstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly. I am wondering if I would be better off using the Migration wizard to take the TS and
content across. Would appreciate any advice on either a) how to fix the issues with the importing of the TS or b) whether I should just be using the migration wizard.
Thanks
G

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Howto export and import SLD data to different SLD's

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Client Export and Import

Hi,
I am having one doubt regarding Client export and import
In my organization we are having three system landscape, but the Quality and Production server(In Process)
Development box is ready to use, and we are having another sand server in different location for our consultant practice
that system is not in our landscape and that is different location,i want to import that client in to my development server hear
It is possible to export that data from that Client(scc8) copy that in my development server and Import(scc7) is possible..?
if possible than what are the pre-requisites to do That Export and Import of client between two different systems,
what is best procedure to do this Task.......!
Regards'
Mohammed.Khan

>>once export is done successfully than can i copy those exported file in to my file server and then copy to my development >>system trans directory (cofiile,datafile) than can i import those files in my development server with *stms_import* command
Yes, you have to
>>than can i go for client import(scc7)
Yes.
>>***Configuring the TMS between that sand box and my development server***
Not required but yes if the sandbox server is not in the landscape you have to create a Virtual System in sandbox and you have to configure the Transport, then only you would be able to create the export file
Regards
Subhash

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Export and Import of mappings/process flows etc

Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
Brandon

This should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
     } else {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel

Export and Import tab in BusinessView Manager

Post Author: palm
CA Forum: Crystal Reports
Hello All, I want to know the use of Export and Import tabs in BVM I tried to export a BV using the Export tab , it created an XML file and now , what can we do with that XML file Appreciate any replies on this
Thanks!!

HI
Export is to take a copy of rule set from CC and export it to a flat file. Same way you can import the to any other environemnt of CC
My second question regarding creating a new rule set for Training environemnt, that you have to create Functions with different names probably you can put "z" or "T"in front of the functions do denote it is for training system and than create it
Parveen

Export and Import of Portal Database - Help Required

Hi,
We have a NW04 production portal running on AIX clustered environment (HACMP). We are building another landscape for which i need to export the current portal and import onto new portal which is already clustered (HACMP). Can someone point document to use sapinst (Jload) for export and import for this high availability systems.
Thanks
Murali.

Hi ,
Check with below pdfs.
check whther they are helpful or not
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/303af93a-0811-2a10-0687-f3514f0103c8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/508e36c5-5914-2b10-a795-d25997cf3270
EP6 system copy
Koti Reddy

Export and Import Computer Groups

Two Monday mornings in a row the Open Directory on our Intel-based Xserve's Mac OS X 10.5.7 Server had failed. This would mean that users who were supposed to have specific access right to folders and share points on other Xserve file servers couldn't get their files or had full access instead of restricted access. The first Monday a restart resolved the issue. The second Monday a restart did not resolve the issue and we opened a case with AppleCare Enterprise Support. We got it up and running again but it failed on Friday during the day. Another call the AppleCare Enterprise Support had me export all my users, user groups, computers and computer groups as a backup.
In the end, I had to do an erase and install of Mac OS X 10.5 server and I updated right to 10.5.8. AppleCare pointed me to the (now Snow Leopard) documentation and told me that now that the server was running and nothing was "broken" and they could not continue to support me. It was up to me to figure out how to restore everything from the documentation. Unfortunately, that document has NOTHING in it about restoring computers or computer groups. It only documents users and user groups. Our user groups were restored with the import of the previously exported list. However, all of the computers in our computer groups appear in the membership list as "Not Found". The preferences/settings for the group were restored but are not being applied to any computers. This means that portable users probably no longer have "mobile" accounts so they can log in off the network and now the Software Update is wide open (although most users are not administrators).
Is there some trick I'm missing to get the computers back into their groups automatically? I can add them manually but I have 400 and can't tell from the list of workstation numbers which are laptops and which are desktops.
-Doug

Hi Tapojyoti,
>>1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
Yes, WSUS 3.0 API Samples and Tools is not supported in Windows Server 2012R2 by default. We may try to rebuild it in Windows Server 2012R2. For detailed information about how the rebuiled, please refer to the readme document of the WSUS 3.0 API Samples
and Tools.
>>2. Is "WSUS 4.0 API Samples and Tools" available?
No, I can't find the WSUS API Samples and Tools for 2012R2.
>>3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
As I have mentioned above, due to WSUS 3.0 API Samples and Tools is released with source code, we can try to rebuild it in the Windows Server 2012R2.
If it doesn't work, as a workaround, we can configure the new WSUS server as the replica server of the existing WSUS server. After the synchronization, change the server mode to stand alone.
Best Regards.
Steven Lee
TechNet Community Support

Releases of export and import systems have to be identical

Similar Messages

Maybe you are looking for