Releasing PO second time in ME28

Hi Experts,
The PO is approved in ME28 for the first time in the transaction code ME28. After approving the PO, changes are made later to the purchase order, which will again reassign the release strategy. This purchase order will again appear in the ME28 list for the approval, since this was already approved in ME28 and this purchase order is appearing for the second time in ME28 but without the release button (green tick mark and pencil icon). However this release button is available in T. code ME29N.
Why this release button is missing in T. code ME28 but it is available in T. code ME29N ? The approver would like to release the PO through the T. code ME28.
Many Thanks in advance.
Regards
LYD

Hi,
Thank you for your answer. The scope of List used in ME28 is ALV.
Actually the key user has created a variant in T. code ME28 with a filter criteria "deletion indicator" on the layout. It means all item lines deleted on PO will not be displayed in ME28 T. code. And it seems that the release button in ME28 T. code is always located on the First item line of the layout. Hence, if the user deletes the first item line of the PO, he will not see the release button (green tick mark and pencil icon) on the ME28 T. code because this button is always located on the first line of the layout.
How to display the button release on ALV list wich has the filter "deletion indicator" on the layout ?
Thanks.
regards,
LYD

Similar Messages

Repeat credit check does not happen for already released sales orders when CMGST =D, for the second time using FM SD_ORDER_CREDIT_CHECK

Hi,
I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
1). Sales order created in the system --> Credit check --> Credit blocked
2). Release credit block manually CMGST =D
3). Reject sales order then unreject the same
4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
5) The order is credit checked and blocked if necessary
All goes well till this point
but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!

Issue resolved
The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field “Release date of the document determined by credit management VBAK – CMFRE”
For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check (still the order will pass into FM but the update entry in the internal table will be blank)this is a standard functionality
Process of rejection and unrejection :
Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check (all this in a single day)
note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank

First Java Web Start download doesn't update, second time does

I'm using Java Web Start with our application. This release we upgraded to java 1.5 from 1.4. Now I have a few PCs, not all, that do not get updates the first time they launch the application. But when the launch it the second time they get the download. The jnlp didn't change between releases? Any suggestions? I'm not using lazy loads, in fact I'm using the default which should be eager.
Thanks.

Hi,
I have similar situation. At the machine is installed Java 1.6 u1. Setup first version of application. After deploy second version of application and run application start update, but console show that application use old packages. At the same time main package is uploaded? I'd try to use <update check="always"?> but there are no positive result.
At the same time then installed Java 1.6 u2, all works fine.
Any suggestion, how it could be resolved, without Java 1.6 u2 installation?
Thans, Kirll.

Second time application does not come - JWS hangs silently

Hi Guys,
I am using jdk1.6.02,Eclipse. When i launch my application for first time through JWS, downloading of files takes place,application is launched successfully. When i launch my application second time, JWS splash screen comes and disappears silently without raising error Message. Nothing happen after that.
On other hand i can launch application as many time through Eclipse.
I looked at logs C:\Documents and Settings\....\Application Data\Sun\Java\Deployment\log but no clue why this is happening..
Can someone suggest What i need to do inorder to make sure application comes successfully second time as well? Where errors for JWS located on system?

Do you have a testcase can send to me? I would take a look to see if it is bug in Java webstart code, is this problem only apply to one application? or do you have any trouble to run other Java webstart application using JRE 1.6 u11? Another option is trying to run early JRE 1.6 release, such as 6u10 or early.
My email is [email protected], thanks for your help.

Photoshop Touch crashes after selecting "Wrap" tool for the second time

As title says, when selecting "wrap" tool for the second time, Photoshop Touch crashes. It doesn't matter which images and even after reboot and clearing all the RAM, it constantly crashes only when selected for the second time. I'm using this on Galaxy Note 2 so it really shouldn't have issues with RAM or Processing power. I'm not quite sure about other tools but it should be looked into and hopefully more stable version will be release soon!
Thank you
Device: SGH-T889 T-Mobile Galaxy Note 2

Hi,
We just released an update that should take care of that issue.
thanks,
Ignacio

BUG? Streaming an mp3-file does not work a second time with iPhone 4

Hi,
I was trying to stream a mp3-file from a server and listen to it on my iPhone. At the first time it worked all right, but when I wanted to listen a second time I got the error message "The server is not configured correctly.", after quicktime started, and nothing happened.
I tried to reset the iPhone and again got the error message.
This is the link: http://kunst.museumsportal.de/76/236.mp3
Does anybody experience similar problems when clicking on the link with an iPhone 4? Do I miss something?
Thanks for help or suggestions,
Klaus

There are 3 things you can try.
Hard reset -Hold home and power button until apple logo is displayed -Release let device reboot -test it out.
If issue persists -go to Settings>gerneral>reset>reset all settings -test.
Issue persisting still??
Last but not least restore and setup as new, this will erase EVERYTHING make sure contacts/calendars are in the iCloud or synced in windows Contacts/Addressbook/outlook, or Addressbook on a mac, and Calendars in Outlook, or iCal
make sure to transfer your purchases, in iTunes windows or mac - File at top left - Transfer purchases.
Transfer photos via iPhoto, windows scanner camera wizard, or Windows Photo Gallery
then follow http://support.apple.com/kb/ht1414

Second time dead phone

This is second time my Nokia phones have died. I had 5610. One day the battery completely drained, so the phone turned off. I proceeded to charge it. About two hours later I go to turn it on and after trying to set the clock, it completely locks up. I cannot use any of the keys. For whatever reason, the 5610 was on back order, so I got a 5310. Now after a couple months, I forgot to charge the phone one day and now I have EXACT same problem and symptons. I set the clock, the phone locks up. I found that if I hit cancel on setting the clock, the phone works for a while (an hour?) and then turns off. I like the phone, but it's just totally unacceptable to not have a phone again for a week while I wait for a replacement.

Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

Error While running the prgram in Second time...Frank Could u pls check th

Hi,
I am using JDeveloper 11g.
I have created a web application using ADF Business Components. Here I created a Bar Graph. When I am running the first it works fine. But when I try to run the second time it is giving some errors like Error 500 - Internal Server Error.
Kindly help me...
Thanks in Advance
Regards,
Jithesh.

Hi Timo,
Thanks a lot for the response.
I am searched as per your advise but still ma problem is there... I am not getting any proper solution for this
In the setDomainEnv.cmd file I am unable to find the PermGen size as you said...In the file I got the following line.
set MEM_PERM_SIZE=-XX:PermSize=48m
Is this I hv to change or something else. I am attaching the same file contents. Kindly help me....
set ORACLE_HOME=C:\Oracle\Middleware\jdeveloper
set WL_HOME=C:\Oracle\Middleware\wlserver_10.3
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=
set SUN_JAVA_HOME=C:\Oracle\Middleware\jdk160_05
if "%JAVA_VENDOR%"=="BEA" (
     set JAVA_HOME=%BEA_JAVA_HOME%
) else (
     if "%JAVA_VENDOR%"=="Sun" (
          set JAVA_HOME=%SUN_JAVA_HOME%
     ) else (
          set JAVA_VENDOR=Sun
          set JAVA_HOME=C:\Oracle\Middleware\jdk160_05
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain
if "%DEBUG_PORT%"=="" (
     set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
     set SERVER_NAME=DefaultServer
set POINTBASE_FLAG=false
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
     :SET_PARAM
     for %%q in (%1) do set noQuotesParam=%%~q
     if /i "%noQuotesParam%" == "nodebug" (
          set debugFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "production" (
          set DOMAIN_PRODUCTION_MODE=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "notestconsole" (
          set testConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noiterativedev" (
          set iterativeDevFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
          set logErrorsToConsoleFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "nopointbase" (
          set POINTBASE_FLAG=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "doExit" (
          set doExitFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "noExit" (
          set doExitFlag=false
          GOTO :EOF
     if /i "%noQuotesParam%" == "verbose" (
          set verboseLoggingFlag=true
          GOTO :EOF
     if /i "%noQuotesParam%" == "enableHotswap" (
          set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
          GOTO :EOF
     ) else (
          set PROXY_SETTINGS=%PROXY_SETTINGS% %1
     GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
     set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
     set debugFlag=false
     set testConsoleFlag=false
     set iterativeDevFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
set MEM_ARGS=-Xms256m -Xmx512m
set MEM_PERM_SIZE=-XX:PermSize=48m
set MEM_MAX_PERM_SIZE=-XX:MaxPermSize=128m
if "%JAVA_VENDOR%"=="Sun" (
     if "%PRODUCTION_MODE%"=="" (
          set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
     set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
     set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if NOT "%USER_MEM_ARGS%"=="" (
     set MEM_ARGS=%USER_MEM_ARGS%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set EXTRA_JAVA_PROPERTIES=-Ddomain.home=%DOMAIN_HOME% -Doracle.home=%ORACLE_HOME% -Doracle.security.jps.config=%DOMAIN_HOME%\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
     @REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
     set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
     set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
@REM Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
set PRE_CLASSPATH=
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
     set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
     set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
     echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
     echo Please edit your environment and set the JAVA_HOME
     echo variable to point to the root directory of your Java installation.
     popd
     pause
     GOTO :EOF
if "%POINTBASE_FLAG%"=="true" (
     set DATABASE_CLASSPATH=%POINTBASE_CLASSPATH%
) else (
     set DATABASE_CLASSPATH=%POINTBASE_CLIENT_CLASSPATH%
set POST_CLASSPATH=
set POST_CLASSPATH=%ORACLE_HOME%\modules\features\adf.share_11.1.1.jar;%POST_CLASSPATH%
set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%;%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
     echo Logging WLS stdout to %WLS_STDOUT_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
     echo Logging WLS stderr to %WLS_STDERR_LOG%
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
if NOT "%EXT_PRE_CLASSPATH%"=="" (
     set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
     set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
     set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
set CLASSPATH=%PRE_CLASSPATH%;%WEBLOGIC_CLASSPATH%;%POST_CLASSPATH%;%WLP_POST_CLASSPATH%
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
Jithesh.

Error While running the prgram in Second time..Frank Could u pls check this

Hi,
I am using JDeveloper 11g.
I have created a web application using ADF Business Components in JSF pages(Created the Bar Graph). When I am running the first it works fine. But when I try to run the second time it is giving some errors like Error 500 - Internal Server Error.
Kindly help me...
Thanks in Advance
Regards,
Jithesh.

So what do you find in the log files, or console output?
--olaf

Unable to fetch data for the second time in an ADOBE form

Hi All,
I am creating a PDF form and its data is based on the output parameter of an interface, when i drag and drop an object from the data view into the body page twice, only the first time the value is getting printed and from the second time it is not printing any data.
Kindly let me know if any one have solution for the same or if i am not clear any where.
Thanks in advance.
Warm Regards,
Kasi Raaman.R

The pbm is now solved

I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file. It says that I cannot complete this action because the file me be open in another application, but it is not open in another

I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file. I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem. Thank you. Jeff

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

You need to have the latest version of iTunes on the computer, version 11.1.3 to be able to handle syncing a newer phone with iOS 7. The iTunes on the iPhone has nothing to do with syncing and is installed by the iOS.
Go to iTunes on the computer, click on Help, Check for updates to update iTunes on the computer, or go to to www.apple.com/itunes/download and download and install the latest version of iTunes to correct your problem.

My iPhone rejects my passcode when I enter it the first and the second time

My iPhone rejects my passcode when I enter it the first and the second time. Why?

Is it random? Does it occasionally accept the passcode, or does the passcode seem to be changed?
See Kappy's list on how to deal with passcode problems:
Re: Passcode being rejected https://discussions.apple.com/message/23376400#23376400

Unable to record audio from second time onwards on Ubuntu 8.04.

Hi All,
I have developed an audio recording application. The application provides the facility to record, save and play the audio using javax.sound API any number of times. The application works fine on MAC and Windows Systems. But when I run the same application on Ubuntu 8.04, for the first time, it works fine and file is recorded and played successfully. If I try to record the second time, the following exception is thrown:
javax.sound.sampled.LineUnavailableException: line with format PCM_SIGNED 44100.0 Hz, 16 bit, stereo, 4 bytes/frame, little-endian not supported.
     at com.sun.media.sound.DirectAudioDevice$DirectDL.implOpen(DirectAudioDevice.java:506)
     at com.sun.media.sound.AbstractDataLine.open(AbstractDataLine.java:107)
     at com.sun.media.sound.AbstractDataLine.open(AbstractDataLine.java:139)
     at com.gtcocalcomp.screenrecorder.JRecorder.initiateAudioRecordingProcess(JRecorder.java:202)
     at com.gtcocalcomp.screenrecorder.JRecorder.<init>(JRecorder.java:79)
     at com.gtcocalcomp.interwrite.RecorderWindow.record(RecordPlayback.java:665)
     at com.gtcocalcomp.interwrite.RecorderWindow$5.mouseReleased(RecordPlayback.java:597)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:232)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.
.EventDispatchThread.run(EventDispatchThread.java:110)
If I close the application and restart, then again for the first time, it works fine and gives the above exception from there onwards.
I tried several options like, making all the objects involved in starting the audio recording process to null, then calling System.gc() and creating every object a fresh but no success.
Can anybody give me some idea/information/links to overcome this problem?
Thanks in advance.

Yes Captfoss, I am calling close() method on all of the lines. As I mentioned in my query that same code is working fine on MAC and Windows OS and the problem is coming only on Ubuntu System. I also tried by making all the objects involved as null, and creating all the objects a fresh, but still no results. When I checked by calling isOpen() method on TargetDataLine, only for the first time, its returning true, thereafter, in all my attempts, its returning false only throwing the exception mentioned in my query.
I came across following link during my search regarding the issue which may provide some more information about this problem to you:
http://osdir.com/ml/voip.sip-communicator.devel/2008-07/msg00058.html
http://osdir.com/ml/voip.sip-communicator.devel/2008-07/msg00060.html
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4735740
http://bugs.sun.com/bugdatabase/view_bug.do;jsessionid=3e32926bb8f4cffffffff8d3d67e0f0aabf3?bug_id=4365713
Can you please suggest whether its an OS issue or is it an issue with JavaSound ?
Is there any specific way to find and close any input line related to audio which are opened ?
Thanks in advance.

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Releasing PO second time in ME28

Similar Messages

Maybe you are looking for