Reload OS 5.4

I think the OS has become corupted or something.  Is it possible to reload this?  And is there a source for OS 5.4?  The problems I've had include calendar won't sync and can't add anything to the Palm calendar.  I've tried everything suggested and still no luck, so was wondering if there's a glitch in the OS?  All this ocurred after I upgraded my Firefox software to v. 3.  I have since gone back to version 3 of Firefox, but the Palm continues to not sync, etc.  My computer is a MAc, OS 10.4.11.
Thanks!
Post relates to: Tungsten T5

To reload your OS on the T5, you'll need to erase the unit with a Hard Reset.  Read the Knowledgebase article for the T5-specific instructions:
To perform a Hard Reset: (Palm Knowledgebase article #887)
While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
As far as your Syncing issues, I find it unlikely simply upgrading your browser would cause the behavior you describe, but the last Mac I worked with had a monochrome screen! 
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • 9630 Keyboard/Buttons not working; hard resets and multiple reloads of OS did not correct

    My BlackBerry 9630 Tour is a little more than a year old. Yesterday the keyboard, trackball, and all buttons stopped working while I was typing out an email. I could not power off the Blackberry without removing the battery for a hard reset. Unfortunately, even after many hard resets, the problem persisted, so I went to the forums for help and tried everything that seemed relevant (multiple times) with no success.
    After reviewing a number of tech support posts, this problem does not appear to be unique to any given model of BB and contact with liquids is cited as a common but not the only cause for this condition.
    I was outside on a very hot and humid day when the malfunction occurred so it is possible some perspiration may have come into contact with the keypad, convenience buttons, or trackball and caused the lockup.
    I'm looking for someone with more smarts than me to help me troubleshoot, identify the actual problem, and identify the proper corrective actions. See below for a synopsis of my actions taken, with the exception of taking it to the shop for repair/replacement.
    The corrective actions listed on the forums and blogs are varied but essentially fall into two primary solutions:
    1. If moisture is suspected to be the issue, let the BB dry out overnight
        a. Pull the battery, naturally air dry or use a blow dryer, let it sit unplugged with no battery for at least 12 hours 
        b. If this doesn't immediately work, try a clean install of the OS (see below)
        c. If this doesn't work, take to the shop and they'll either replace the keyboard and/or trackball or replace entire unit
    2. If moisture is not suspected to be a factor then perform a backup followed by a clean install of OS
         a. Backup your files using Desktop Manager Backup and Restore
         b. Do a clean reinstall OS using Desktop Manager Application Loader
             i. The OS installation process is dicey  and takes a little patience and focus-- you have to wait for the Desktop Manager to properly recognize the device before it can proceed on some of the steps and it may take several iterations to get completely through the process and get the "successful installation" message.
             ii. Further, you may need to keep the battery removed during the initial steps in the process and only insert it when the process gets to the point of actually trying to copy files into the BB memory
                * The BB LCD will display an icon that looks like a battery with a slash through it letting you know the process cannot proceed until a battery is inserted and the Desktop Manager Application Loader will also give you an error indicating it cannot find the device.
                * After inserting the battery, it will take a few seconds or more for the computer to recognize the USB device and for Desktop Manager to respond with the BB password pop-up window.
                * After typing in your BB password, the installation should continue.
        c. If you can get the OS successfully reloaded and your keyboard/trackball/buttons work -- great -- now restore your files and settings using Desktop Manager Backup and Restore and get on with your life.
        d. If this does NOT work after multiple successful clean OS installations apparently you are completely hosed; the only other option is to get it to the shop for repair or replacement.
    1.. Does anyone have a troubleshooting procedures that will identify whether moisture is the root cause or not?
    2. Is there another corrective procedure that's been missed?

    Took  BB to Sprint Store and technician took it apart, saw no evidence of moisture or any other damage, and concluded that the keyboard had failed. Not an uncommon occurance.
    Also, he told me you cannot simply replace the keyboard, it is integral to the systemboard, so you need to replace the entire device.
    He did commend the troubleshooting approach used prior to going to the store -- most folks won't take the time to do even basic troubleshooting (like taking out the battery), they just go to the store and say "fix it please". He confirmed that the steps outlined in the initial post were correct and did not have any other solutions.
    Take away:
    If you want to do some troubleshooting yourself to check for moisture, the process was pretty straightforward. After watching the technician, most folks with a little technical or mechanical aptitude should be able to manage the dismantling process. You just need a small phillips head screwdriver and a little patience. Good lighting and a magnifying glass or reading glasses also help!

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Where does firefox cache the form parameters to be used in the reload event of a page that was the resposne of a HTTP POST request?

    Suppose there is form in a web page and it submits data in HTTP POST method. After submitting the form, if I reload the page [either by the refresh button or back button; whichever applicable], firefox asks permission to resend the form data by saying "To display this page, Firefox must send information that will repeat any action...". Now if the user clicks on the resend, firefox resubmits the form data.
    So where does firefox store this from data for such future resending/resubmission?
    Is it possible to retrieve/manipulate those stored form data?

    I thought I'd tried that, as tried lots of other things like encoding URL, but obviously not as this works.
    Thanks for the quick reply.
    We also have an issue with the people results not being able to be refined by Department or Job Title now we have connected the SP2010 farm to use the service applications from a SP2013 farm.
    Any ideas on this?  I've started a new thread as its unrelated though:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c89d5463-4531-4a28-9586-1f690c7b580d/can-you-refine-people-search-results-using-a-sharepoint-2013-search-service-application-connected-in?forum=sharepointsearch

  • I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

    I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

    Upgrade the version of itunes on the new computer
    Itunes.com for free download.
    Peace

  • Problems with Photoshop CS2 I originally purchased this software several years ago. At time I was running Microsoft Windows XP. This computer recently was replaced with  a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few

    Problems with Photoshop CS2
    I originally purchased this software several years ago. At time I was running Microsoft Windows XP.
    This computer recently was replaced with a Dell running Windows 8.I reloaded my CS2 on this computer & it ran fine with a few exceptions as follows;
    when the software comes up initially I get a message that says “could not complete your request because of program error”. Hitting OK allows me to continue using the software .
    When I try to activate a function using CTLR or ALT keys I get this message “required application failed to load and the product cannot continue. Please reinstall the application”. This causes the application to abort.
    Reloading my CS2 continues to generate the same messages when I depress the CTLR or ALT keys.

    Your original copy is obsolete and Adobe is offering a free replacement you are entitled to. Download and use that and that should clear it up for you.
    https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
    Download this copy of CS2 and use the serial number provided next to the download link.

  • Reset the form to Null or Reload the page using reset even after a submit

    Hi ,
    This is the scenario:
    I have two button - Submit and Reset
    Submit is used for validation and after validation is passed it passes it to another form to enter into database.
    Bascially the reset works fine if I use it before using the submit button in the form. For instance,if on submit there is some error as the values have not passed a validation. There is a error pop up message shown and the values are retained in the field and Now if I use reset , all the values of the field do not go back to null.
    I am new with form validation. I checked online and it said that reset will not clear if we have used submit and we need to use javascript to do it.
    So I made reset into a button which onclick event calls the reset() function and clears the form but I am sure that the code is not right as it is not working, I tired putting a alert message in my function to reassue that the function is being called but I think it is not.
    Posting my code
    <INPUT id=reset1 name=reset1 type =button value=Reset onClick="reset()">
    <Script>
    function reset()
    alert ("all values shall be cleared now");
    document.frmUser.name.value = "" ;
    document.frmUser.uservalue  = "" ;
    document.frmUser.contactNumbervalue  = "";
    document.frmUser.emailvalue  = "" ;
    </Script>
    I am not sure if its the best way to do it.
    I want the whole form to refresh/ reload every time reset is clicked and all the fields to have no values.
    Thanks for the help in advance.
    Sumant                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi .
    I got break on this issue by following the code snippet
    <script >
    function clearForm() {
    document.getElementsByName('foo')[0].value = '';
    document.getElementsByName('bar')[0].value = '';
    document.getElementsByName('baz')[0].value = '';
    </script>
    <html:button value="Clear" onklick="clearForm() />
    thanks,
    Sumant K

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • How do I watch a movie downloaded to my MacBook on my ATV?     The movie works fine on the computer but I just get a checkerboard pattern on the TV screen with audio but no video.  Apple support is useless and suggested that I reload the software...

    Just downloaded a HD movie to my computer (brand new MacBook Pro, all software up to date) and can't watch it on my Apple TV (brand new last year, all software upto date).  Using Airplay mirroring works fine in general but when I press play on the movie I lose the picture and get only a checkerboard pattern and sound.  Another MacBook we have gives a black screen with no sound.  Apple assistance is completely useless.  They suggested that I download the most recent software (all upto date), reload the movie (done and no help) or read the FAQs (no help, although this board suggests that there is a fundamental compatibility issue with mirroring of HD content...!)   That's what the ATV is for!   The new MacBook uses a different connector and I can't plug it directly into the monitor input on my TV with the connector I had from the old computer.   I ordered a new connector for fifty bucks and they stupidly sent it UPS with a signature required for delivery since it is such a high value item so now I have a hassle to receive it.  In any case plugging in a wire from across the room isn't a solution.  Is there any way to make all of this supposedly integrated hardware and software work or has Apple completely lost their way and turned into a Microsoft clone?   Hopefully some of their market mavens will read this and steer the ship back on course.  In the meantime any help you may provide would be much appreciated.

    The movie is from iTunes.   You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case. 

  • Multitasking on iPod Touch 4G, running iOS 6.1.2, nearly impossible. Opened,  background apps do not seem to stay in memory and must "reload" every time I switch back to them. Also, intense battery drain (imo).

    Let's say I'm playing Words with Friends, and also Angry Birds. I may want to go back and forth between the two. When I do so, the app that was in the background needs to reload again. There is no quick access or ability to quickly resume where I left off. And the reloading means that the app restarts from its opening screens...so if I was working on a level, I have to start all over again. And quite often, a game like Angry Birds will lag greatly when I first open it...moving almost in slow-motion.
    I don't know if this is typical behavior when playing multiple games, or if I have an issue with my device. I've rebooted and even reset and restored, all to no avail.
    There doesn't appear to be as much of an issue if I'm playing one game but also have the music player open, or Safari, Notes, Reminders, etc. Those will resume just fine, though there may be some lag when opening/re-opening them.
    So I guess the problem seems to lie within 3rd party apps, and not the apps that are part of the iPod/iOS.
    The other problem is battery drain. I do all of my music listening via Bluetooth, so I expect that to have a greater impact than if I were using plugged in headphones, and I have location services turned on. But I have most notifications turned off, all email accounts set to manual and not push, screen brightness turned down and auto brightness turned on, "ask to join networks" turned off, auto-lock is set to 2 minutes but I almost always turn off the screen immediately after setting up my music listening (since I do so at work), volume limit turned on, EQ turned off, sound check turned off,
    With these settings, my battery can drain 20% or more within 10-15 minutes of game play. And these are not what I would consider memory intensive games--just Words and Angry Birds.
    I've installed (and recently uninstalled) a couple of battery meters from the Apple Store as well--freebies. Carat, Battery Doctor, Battery HD, Battery Magic.
    Carat and Battery Doctor seemed to offer the most pertinent and accurate information so the others were uninstalled long ago.
    The Accelerate tab in Battery Doctor show the amount of memory in use, and the amount of available memory. The vast majority of the time, the memory in use is approximately 94%. I will occasionally choose to "accelerate" which supposedly frees up memory, but this "bump" lasts only a brief time and I'm not sure it's a great idea.
    Even with absolutely nothing open or running, my used memory is generally still above 80%.
    Carat, if anyone is familiar with it, shows a J-Score. My J-Score is 17, which means that my performance (according to Carat, anyway) is better than only 17% of the users who have Carat installed. In other words, 83% of people are getting better performance from their devices. It also has "battery hog" and "battery bug" sections. It doesn't detect any hogs or bugs.
    I use my iPod Touch in rather limited ways. A typical day consists of approximately 5 hours of music listening via Bluetooth and 30 minutes to 1 hour of playing the aforementioned games. The occasional note and reminder, perhaps a brief check-in with the weather, and that's about it. And wifi is in use only when at home (there is no hotspot at work). Still, I need to charge it every day. I'd be keen to do more with the iPod if I could count on it to last more than a day.
    I've read up on multiple forums and blogs for tips on prolonging a battery charge, and believe I've taken everything into account, and applied whatever I could. I've even reset the network settings and try to discharge the battery completely once a month (for supposed battery calibration).
    I'm really hoping people can offer some suggestions or comments on whether this is typical behavior or if my battery is going, or even offer some additional tips.
    With iOS 7 on the horizon, I'm hoping the upgrade will offer some resolutions (I've read there is better multitasking), but considering how weakly my device performs at this point, I'm not entirely convinced that an iOS upgrade will actually make any improvements.
    Thanks a lot for reading.

    No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
    What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod.

  • HT201272 Where can I find the app password saver by yonglin wang.  i wanted to restore my iphone and i had purchased this app and it is not anywhere in my purchases to reload.  Why is it not on my list of purchases?

    Where can I find the app "password Saver" by yonglin wang?  while updating my iphone the app was dropped for some reason.  I went to reload from my purchased apps and it is not available.  The history shows my purchase but I can not find the app to reload.  I've lost some critical info and need to retreive if possible.  Any suggestions?

    You tried what ? If the app is no longer available in the store (can you find it in the main part of the store ?) for re-downloading then you would need to have a copy of it somewhere e.g. on your computer's iTunes, on a backup of your downloads.

  • I bought a ipod touch second generation from someone at work and it wont sync with itunes. i am using vista on a pc,and i have reloaded itunes 5 times and it still wont sync. i think it is a problem with vista as i had my ipod and sync cable checked outok

    i bought a ipod touch from a coworker and it wont sync up with my pc. i have reloaded itunes 5 times, checked my security which is allowing it through and had the ipod and sync cable checked at a local store. i think it has somthing to do with vista operating system, the ipod does not show up in devices and it continues to beep when it is plugged into the usb. this is my first ipod and so far am very frustrated .

    Check these tips:
    iOS: Device not recognized in iTunes for Windows

  • I just installed Firefox 4 from Firefox 3.6.15. Every time I open the browser, it reverts back to 3.6.15 and I have to reload 4 all over again. What gives?

    I installed beta 4 last night. Now, every time I open Firefox it asks me if I want to make Firefox my default browser. I click yes, and it goes to Firefox 3.6.15 and thanks me for upgrading. I have been running 3.6.15 since it was released. I have to reload beta 4 to get back to it again.

    I got this all screwed up too.
    hmm.. where to start?
    3.6 and 4.0 beta - really aren't intended to play well together.
    As has been mentioned above, they tend to write over each other.
    I managed to get both 3.6.15 and 4.0 beta 12 on the same machine.
    But, I had to do it several times.
    I got lucky by deleting everything Mozilla, then installing 4.0b12, then 3.6.15 - while making sure that each installed into a separate folder.
    I also took care to copy out a couple of BookMark BackUp files - just in case.
    My old 3.6# had become so bloated - and, Unstable - for Me, it was time.
    The bookmarks were all that I was still interested in.
    All the Plugins, Themes, AddOns, etc... had slowed the app to a crawl.
    So, I did as complete a wipe of Mozilla bloat code that I could, including profiles.
    I then did some registry cleaning.
    Then I installed 4.0b12 and 3.6.15.
    I can't open them both at the same time.
    If I open 3.6.15 first, then open 4.0b12 - the beta comes up as 3.6.15.
    If I open 4.0b12 first, then open 3.6.15 - the 3.6 comes up as the beta.
    This has a lot to do with both apps sharing the same default profile.
    I hope to drop down to one app in the near future.
    So, cobbling multiple profiles in order to diddle side by side apps - isn't worth it at this stage.
    For me, I can't open FF 4.0b12 when my virus protection is running. PCTools doesn't like some thing about the way FF4.0 wants to phone home when it opens.
    So, I can't commit to the 4.0b12, yet.
    3.6.15 was crashing on open too - until I uninstalled the feedback addon. - go figure -.
    Also, I can't get the 4.0b12 to start in safe-mode with the PCTools antivirus running.
    At the rater they are going, I don't see 3.6.# going away any time soon.

  • Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

    I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
    Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
    Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
    Thanks.

    I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info:  Mac OS X v10.6 Snow Leopard: How to Erase and Install  
                     Article HT3910
                     located at: http://support.apple.com/kb/HT3910
    Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
    That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
    I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

Maybe you are looking for

  • Tower Defense Action Script Problem

    Hi, I've been working my way through a tutorial to create a tower defense game. I've ran into a slight problem with a bit of code: package{           imporProxy-Connection: keep-alive           Cache-Control: max-age=0 I get an Identifier 1078 error,

  • Is Oracle 9i down?

    While trying to get Spatial Database Engine set up to work with Oracle 9i on a Solaris 9 platform, I get the following. Does this mean that Sqlplus is working but Oracle itself is down?: sqlplus "/as sysdba" SQL*Plus: Release 9.0.1.0.0 - Production o

  • IPhone not synching

    I have just upgraded from 10.4.11 where the iPhone synched perfectly. Now using 10.5.4 and when I connect the phone Image Capture opens but not iTunes. I can download the pictures. iPhone appears in the System Profile as connected to the appropriate

  • Exceptions after deployment

    An adf has been deployed to a weblogic 11g domain. It needs to communicate to another weblogic domain (created by weblogic 10g). But I get errors as follow. Before deployment, this ADF application works fine. Session ---CreationTime : 1260862228346 d

  • Artwork for WAV files?

    Does anyone know how to import album artwork into iTunes for a WAV file.  Nothing happens after bringing in the artwork.  Can it be done?