Reminders after changing Date and Time

Hello,
Recently i changed my date to 1 month later, when i do that all the reminders till that day poped up and i needed to quit all of them or i pressed the power button once and kinda ignored them. But when i came back to todays date, reminders stoped to show up.
How i can roll back that issue? I can't re-sync them or restore them, i just want them to pop-up again when their time is come.
Thank you in advance!

I figured it out by myself. i pressed and hold the sleep/wake button while pressing and holding home button and wait while Apple logo appears-about 10 seconds-. This is a reseting method and it's not erasing any data from your iphone.

Similar Messages

Changing Date and Time

I have selected both photos and event separately in several attempts to change date and time in Photos/Adjust Date and Time without success. Each time I have attempted to do so another date and time has replaced the previous one but each has been incorrect. Some dates have been inserted dating back several centuries!! The time as well as the date has been incorrect.
I would appreciate suggestions and help in making the change correct.
Thanks.
Vernon

I also have this problem. One folder in particular is affected; within it after a few times to get it into the 2000's from 1900's, it is currently showing 1539.
I am at a loss since the batch change roller lets me select the correct year in iphoto.
I thought it might be a glitch in the older software so upgraded to the '11 iphoto. This made no difference at all.
This is still an issue unless the original poster got an answer or worked it out him/her self.
I also use Picasa on the same system but since it gets the photos from iphoto, it gets its errors there too.

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

Why does calendar keep changing dates and times on icloud

My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)

If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

Not allowed to change date and time for some photos; why?

I have some images that I scanned in of old photos. I'm trying to change the date and time and location to reflect the time the original photo was taken. I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed. They are simple JPEG's so I'm not sure what the problem is. Do I need to convert it to some other format first to be able to do this? Any ideas would be helpful...

Hello Toran,
are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
Meta Data -> change date and time
deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
Regards, Léonie

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

My app store is saying i have to change date and time setting to get a secure connection but the date and time are correct please help?

My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct

Is the Time Zone also correct?
Also see:
Can't connect to the iTunes Store

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

My new Nokia Lumia 800 changes date and time after...

When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

How can i change date and time after importing a file

hello
i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
i believe 2004 is the date i put them on the computer.
Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
it works well in iMovie using the help files:
Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
But as i said i cant import the files in FCP have to import them to iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time are gone and in FCP 2004 is again the date of the file!!!
Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
Jemajoro

OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
Here is another screen shot.
Note that all clips in "2007 August" event have the date of Aug x, 2007.
Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
I think you know this but I am using the following feature:
Go to the sprocket icon under the events.
Select "Group events by date" and then by "group events by year and month"
Thanks again for all the help

Lost clips after adjusting date and time??

I just updated to iMovie 10.0.3 and adjusted a buch of events in iMovie. All of them were incorrectly placed in wrong years when viewing in "by date" format. After adjusting the date and time with the event highlighted, I come to see either all or some (a clip of two) of the event is lost. The good old "missing file" is what I get in the playback window.
I want to go on an anti-iMovie rant as this version has caused me NOTHING but headaches sence I installed it last year but it's MY fault for not having a spare iMovie 9.0 laying around so I cannot revert.
Is there any solution here besides wiping my iMovie library clean and restoring from TM?
Thanks.
EDIT, I just looked in each event in the file system and the original media is not even there anymore but the library size hasnt changed. Wow. I don't get this at all.

There seems to be a serious bug here that has been introduced with iMovie 10.0.3, and reported by several posters. I would recommend you report it using Apple feedback at: http://www.apple.com/feedback/
There is probably a particular infrequent set of conditions that have to exist for a clip to be deleted after using the adjust time and date function, but I've seen no posts yet that have clarified this. Any further details you have would be worth reporting - for example did you change the date/time to earlier or later? If only some date/time changed clips have disappeared, do they have anything in common, not shared by the clips which havn't disappeared?
You could restore your library from Time machine or, if there are not many lost clips it may be simpler and quicker s to re-import (or drag and drop) the clips from a backup and correct affected projects. (Maybe you can change their date and time before importing them).
As for the library size were the clips big enough to make a visible difference to the library total?
Have you searched for the missing clips by name?
Geoff.

OSX 10.5.8- cannot change date and time. Have changed pram battery, still have spinning rainbow dot.

I have an older Powermac G5 dual PPC processor with OSX 5.8 (Leopard) on it. I cannot change the date and time, all I get is the spinning rainbow disc and the prefs have to be shut down. Does anyone know how to get this back on track? Thanks in advance!

Let''s try a new admin account...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

Time Zone...When changing date and time.

After having updated to version 10.6.1, I am still experiencing the same top sites glitch as everyone else. However, is anyone else's time zone graphics funky (missing squares?) and really unresponsive when moving across the earth from side to side?

For me - I am pretty anal about keeping my camera's time accurate, and I always adjust time on import to the correct time zone if I am shooting in a different area (I live in AZ time, and when I shoot on the east coast i set the time zone to eastern on import). So I doubt I would ever use that feature.
If you ever do need this feature, be aware that the date and time displayed in the Adjust Date and Time dialogue box are the date and time in the time zone your computer is set to, not the time zone the picture was taken in.
So if you have a picture taken on the east coast and you open the adjust date/time dialogue, you will see the time for the picture in AZ time (a few hours earlier than the time displayed in the Image Date field). To set the time for the picture, you have to figure out what time it was in AZ when the picture was taken, and enter that time.
After playing around with this I've filed it as a bug with Apple. Even if they aren't going to let you change the time zone (functionality I think is needed), they should at least consistently use the same time zone with a picture, rather than forcing you to do time zone conversions by hand.

Changing Date and Time of the Service Tickets.

Dear All,
                  I am implementing a program where i need to change the date and time of incoming service tickets which comes after 6 PM to next day 9 AM. Also if the next day is holiday then it should preset to day after tomorrow's 9 AM.
                  Is there any std. FM to present for this? How should i take care of the Holidays coming. Kindly give a brief idea about the scenario and how the above mentioned functionality can be implemented.
                  Rewards Points for all helpful answers.
Regards,
Vinayak

Hey Vinayak,
I had similar requirement... i had almost fulfilled the requirement but till then the project got scrapped...
I will give you the brief idea on how to go about the whole thing....
You can use this FM to satisfy your requirement.....
CALL FUNCTION 'HOLIDAY_GET'
        EXPORTING
          holiday_calendar           = 'XH'
          factory_calendar           = 'XF'
          date_from                  = lw_frm_date
          date_to                    = sy-datum
        TABLES
          holidays                   = lit_holidays
        EXCEPTIONS
          factory_calendar_not_found = 1
          holiday_calendar_not_found = 2
          date_has_invalid_format    = 3
          date_inconsistency         = 4
          OTHERS                     = 5.
For this you need to create factory calendar and holiday calendar.....This can be done in SPRO path.. Just search for the keywords in SPRO IMG....
You need to do some coding for this and use FM CRM_ORDER_MAINTAIN followed by CRM_ORDER_SAVE to get this thing done which will eventually change the end date of the ticket....
I think you are well briefed on how to go about it from now.....
Inspire ppl by rewarding...
Regards,
Anand..

Reminders after changing Date and Time

Similar Messages

Maybe you are looking for