REMOTE and VIDEO

Does the remote work with video and what are its functions.... can i change chapters/fast foweward/slow/pause play and does the menu button work...

Yep, that's about all it does. I expected it to do everything the click wheel does. However, it does very little. You can't use the menu button. Unless you are extremely lazy or unable to get up and change the volume or press play/pause, don't buy this. Hopefully, this is something Apple can address with a firmware update. Of all the items I bought for the ipod, this one is by far the biggest waste of money.

Similar Messages

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • Remote and mic not working

    I got a earpods with remote and mic for my iPod touch quite while ago,
    it stopped working a couple of months ago, how can I fix this!

    First see if the earphones/mic/remote work with another device or if a know working one works with your iPod.
    If the iPod is the problem:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Fix it yourself
    iPod Touch Repair – iFixit

  • Apple remote and built-in trackpad stop responding

    I have a Macbook Pro - late 2011 - and have upgraded to Mountain Lion the day it was released. I bought a brand new Apple remote and paired it with my MBP. Today, as usual, I used an HDMI cable to connect my MBP to a LED TV and started giving a lecture based on a Keynote presentation I created full of videos snippets and the like that I sometimes pause using the remote. All of a sudden the remote - which had been previously paired with my computer - stopped responding. I immediately switched to the arrow keys on the keyboard and finished the lecture. I also noticed that the built-in trackpad had stopped responding to multiple gestures.
    Has anyone been experiencing these problems? And is there a solution? I have searched high and low, but to no avail.
    TIA

    Found a solution!!!
    Reset the System Management Controller.
    Now eveything is working as expected!

  • Problem With Remote, and strange error that crashes diagnos

    Hey guys. I'm a n00b to the forum, but I think this is my best hope. I'm having this problem getting my remote to work, and I'm getting an error that appears to common, but I haven't been able to find a solid solution. I can't do a reload, since I have savegame files that can't be backed up, and a large home-video backup on this computer. I don't have enough DVDs to back it all up onto. The one thing that I REALLY want to work is the Remote. For some reason it won't work. I know it isn't the battery, because it worked fine before I reloaded this system last (September?), and I have tried a new battery in it. I've also tried turning up the sensitivity settings. I've noticed the red light occaisionally flickers on the Creative Hub thing when I'm not even touching the remote. When I try to run the diagnostic program I get an error (The instruction at "0x77f536f7" memory "0x00000000". The memory could not be "written". Click OK to Terminate the program, or Click CANCEL to Debug the program) I've tried clicking CANCEL on this, and that does nothing but pop up the error message (The instruction at "0x084c42f" referenced memory at 0x00000008". The memory could not be "read". Click OK to terminate the program). Clicking OK on the previous window also gives you that error. Clicking OK on the error just mentioned closes down the diag program. I've tried using the Restore Defaults option, and that didn't fix the problem either. I've also run DocMemory on my computer, and according to it, my RAM is fine. As far as product updates go, I've downloaded them all and installed them all too. Everything works but the remote... and I think it may be partially b/c of the supposed RAM-based error. I haven't tried running it in safe mode yet... I'll try that and get back to you ASAP.
    --> Creative Soundblaster Audigy 2 ZS Plat. Pro.
    --> 52mb OCZ DDR400.
    --> AMD 64 3000+
    --> 20gig WD HDD
    --> 28mb PowerColour ATi Radeon 9200se
    --> Asus WiFi B
    --> XP Home
    I'm a huge computer junkie so feel free to go technical on me. Hopefully somebody can fix my problem.
    Thanks,
    -Richard-
    btw: I often see these same errors when shutting down my computer.
    [EDIT: 2/26/2004 @ 0:43PM]
    Okay, I just tried running the diag in safemode... still came up with the errors.
    -Richard-Message Edited by wardrich on 2-27-2004 03:40 AM

    Wardrich,
    There are a couple of things I would suggest. First off I would make sure that the remote control is enabled in Mediasource, it is not by default. To do this go into Mediasource and go to Tools/Settings. In here there is a remote control tab. Make sure the remote and the OSD is enabled in here. If it is then we need to look at doing a cleansweep and reinstall of the card. Here are the instructions on cleansweeping the card:
    http://forums.americas.creative.com/...&message.id=72
    Jeremy

  • SCCM 2012 Client and Workstation Audio and Video Problems

    SCCM 2012 SP1 environment.
    We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI.  As an example,
    on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors.  With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
    and with a video the audio and video get out of sync.  As well, my mouse no longer functions smoothly - it jumps around.  This happens whether accessing content from a website or simply a local file on my computer.  If I uninstall the SCCM client,
    the issue goes away entirely.  I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
    happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
    At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well.  I believe these stations
    have DVI connected monitors.  Driver updates do not appear to resolve the issue.
    Has anyone experienced this in their environment?  Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

    Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
    ccmsetup.exe /skipprereq:silverlight.exe
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • During restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos please help my memory doubles.

    during restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover
    if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos
    please help my memory doubles.

    I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
    Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
    If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.

  • Apple TV for watching photos and videos from IMAC

    I am considering purchasing Apple TV 40GB for streaming photos and videos from my IMAC to TV on demand. Is that use case supported well by Apple TV or they are secondary and watching movies and TV shows from Itunes library are the primary use cases? I looked up Apple's page on Apple TV but it does not even talk about watching home videos using Apple TV.
    Through posts on this forum and other places, I found that I would have to "export" video in either large or medium format. The question is how is the quality of watching that video using ATV over wireless N network?
    Related question is how good is ATV's video card?
    Is this a common use cases many people use ATV for? I have recorded lot of videos using Sony mini-DV camcorder but don't end up watching because creating DVD and keeping organized DVD library is a cumbersome process.
    The other question I have is about usability of Apple remote. I don't have Iphone or Ipod touch with the remote app. Is the Apple remote good enough for playing videos, photos and occassionaly music?
    Thanks in advance,
    DJ

    dj2008 wrote:
    Thanks. A couple of follow-up questions:
    1) All I need to do to stream is to have Itunes running, right? In other words, I don't need to go to IMAC to initiate streaming. Is there a way to wake up the IMAC if it is in standby mode?
    You need imac running with itunes open, and both it an AppleTV connected to the local network.
    I don't think it'll work with computer in standby mode.
    2) I am planning to use Imovie's built-in export function. Is that good enough or do I need other softwares mentioned here (MPEGStreamclip or Handbrake)? Where do I get these softwares? Are they significantly better than Imovie's export function?
    Both are free one from squared5.com, the other you can Google. iMovie's output may well be fine, but I have found in the past that standard export settings didn't give me best results and better could be achieved either using custom export settings from iMovie or using other apps, some of which can be a bit quicker. You will also be able to use the Handbrake app to make Appletv compatible video of your home made non-commercial DVDs (without menus).
    Quality is pretty much in the eye of the beholder so if imovie does the job no reason not to use it.
    3) I have noticed that video quality on my IMAC is not as good as that of same video on DVD created using iDVD. Have 50 inch Plasma TV with up-conversion DVD player. Maybe the graphics card of my IMAC is not as good. I am bringing this up because someone mentioned that quality of video using ATV would be as good as the one seen on IMAC.
    Any upscaling done on the DVD player is altering the original content to give a potentially more pleasing image though not adding any real information.
    The DVD is likely to be of lower quality (though perhaps barely perceptible if conversion is good) than your source video on the iMac, and any differences are likely to be down to the DVD player vs software playback on the iMac, coupled potentially with scaling and frame interpolation on the TV depending on how the set processes incoming video.
    I think it's impossible to say how you'd find AppleTV compared to DVD for playback of your home video though I think the majority of people are more than happy when things have been encoded well.

  • TS3276 Unable to open email pictures and videos

    Unable to open attachments and video on received emails What am I missing?

        Hi Anie1015,
    I know how important it is to retrieve your emails on your device. Let's make sure that all the settings are correct. Please go to Settings> Mails, Contacts, Calendar> Turn on Load Remote Images. Let us know how this works out for you.
    NidiaA_VZW
    Please follow us on Twitter @vzwsupport

  • Screen Sharing, audio, and video chat not working with certain people

    My ichat application will suddenly stop working after just a few seconds of starting wither screen sharing, video chat, or audio chat. I get the error message "No data has been received for the last 10 seconds." How do i go about fixing this?

    Hi,
    This message can be caused two ways.
    1) a loss of Internet Connection through a Physical means.
    (turning Off Airport card, Pulling out Ethernet Cable, modem or router failure, loss of service from ISP)
    2) A router or modem Software intervention.
    This most commonly happens in Video chats. The device has a feature called DOS (Denial of Service) which with modern Internet Speeds and Video Streams gets to the threshold where it cuts in. It requires that you turn the feature Off as there is not adjustment in the threshold at which it works.
    A similar feature with a similar result is SPI (Stateful Packet Inspection).
    Having said that, it very unusual to have it effect Audio only chat or Screen Sharing.
    This means the issue could be at the Buddies end.
    NOTES:
    iChat creates Logs of Connection Failures of which there are about 5 types, caused by various issues in the connection Process.
    The 10 Sec Error message covers those things where the connect End but iChat did not receive a "BYE" message (a controlled End to the Chat) or get a failure of another sort.
    Basically you were connected properly (even if you did not hear or see the Buddy) and so other event cut the connection that was not iChat related.
    Can you do Video chats with any of the 6 names in Table 1 ?
    http://www.ralphjohns.co.uk/ContactTesters.html
    Some of those will respond to Audio Only invites.
    (I just tested 4 of them and three play music and one the Audio form the Jonathon Ive Video)
    Do any of those work ?
    That will exclude a Modem or Router Issue with DOS or SPI on the remote end.
    9:29 PM Wednesday; June 9, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Yosemite issues with Airplay (audio and video stuttering)

    I have two very annoying issues with Airplay after upgrading to OS Yosemite (these issues were non-existent with the OS Maverciks) -
    1. Periods of Image and audio stuttering lasting approximately 20 seconds, coming on and off at regular and frequent intervals,
    2. It is virtually impossible to disconnect the airplay from the Apple TV by selecting "disconnect airplay display" - one needs to restart the machine to disconnect.
    The configuration I am using includes the latest release of Apple TV (with latest software), the latest Airport Extreme  (with latest software) and the 2013  iMac with the latest OS - Yosemite. I would like to reiterate there was no image and video choppiness / stuttering issue with Macericks. A serach for the stuttering issue shows it was reported by other users as well (following upgrade to the official Yosemite) and was first reported by a number of users during the beta testing of Yosemite.
    I would appreciate your advice how to fix the issue.

    Hold down the menu and down buttons on the apple TV remote for 6 seconds. It worked for me.
    I must admit to be getting a little tired of finding workarounds to Apple's glitches. I now spend hours searching the net to find out how to get their products to do what they say they will.
    Remember when things just worked?

  • How do i share media (music and videos) between all of my devices?

    i currently have (and attempt to use as much as possible) the following devices:  macbook pro 15", ipad 4, iphone 6 plus 64 GB, and appletv 2.
    i would love it if these devices would talk to each other correctly.  first came the macbook, and i took an internal 2 tb drive cannibalized from my previous pc and transformed it into an external.  that drive is desinated as my media drive, it includes all of my video and music.  the macbook and the appletv talk to each other flawlessly.  every music and video file on that drive is accesible to me using apple tv. 
    next up is the ipad, which includes some of my videos (movies), but no tv shows.  music also does not show up, only options to buy from the store.  but i already have a music library that includes many songs downloaded from the store that dont show up, only some stupid U2 album that i never downloaded.
    finally, we get to the iphone, which i just got.  i get no shared music or videos here at all.
    by the way, all settings are set to share with each device in settings and itunes.  each device talks to one another.  i know this because there is some level of sharing on each device (ie ipad gets videos, iphone shares spreadsheets and other productivity files.  appletv shares everything.  i now want to sync these devices so that they can share the same data while on the same home network.  i should be able to do this, right?
    also, i know that i can airdrop/transfer but thats not really what im looking to do atm.
    thanks
    spencer c

    im more than a little disappointed here.  can anyone recommend another forum please?

  • How do I use my web cam to record audio and video? I can get the video to work but no sound.

    I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Please HELP!  My kid wiped my iPhone5 and I need to get my photos and videos off it!  I have no backup with iTunes :((  Is there a way to scan the device manually?

    hi,
    New to this, so go easy on me.  I recently got my first iDevice - an iPhone 5.  I've used it for a month now and I have to say I love it. 
    But, I gave it to my kid this morning to look at.  It was locked, so I assumed it was safe.  WRONG.  5 mins later, I returned to him and my lovely iPhone5 was at the setup /pick your language screen!  Looks like he entered the password incorrectly too many times and wiped it.
    Now - I thought it would be fairly easy to recover the data and the apps - but it turns out this is not the case.   I was never prompted to install iTunes and sync the device - not in the manual, not on the device when setting it up - so how was I to know that that would be my backup.  I checked iCloud at a suggestion of an IT pal - nothing there, despite knowing that I had a Photo stream enabled.  I may have disabled it only recently, but not sure if I can manually turn it on again?
    Anyway - is there a way to manually scan my device and grab my all important photos and videos?
    Cheers for any suggestions!

    Hi Michela27,
    Thanks for visiting Apple Support Communities.
    If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Cheers,
    Jeremy

  • I really need emergency iphone help- please- it has gone into restoration mode and wont come out unless i click restore- if i do will i loose all my photos and videos etc? please help!!!

    i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
    what should i do anny coments or ideas please let me know!

    The first step in the upgrade process is a backup.
    Did iTunes not create a new backup when you first connected it?
    You really should be syncing your device and copying pictures off of it on a regular basis.
    Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
    At this point, you only option is to restore.
    Also, in the future, ensure your laptop is plugged into external power before starting upgrades.

Maybe you are looking for

  • How do I remove a song from my iTunes account?

    How do I remove a song from my iTunes acct?

  • Any solutions for MW1 (not so)Smart Wireless Headset Pro errors?

    These are the problems I have experienced so far and have not had any feedback from Sony as to how to fix them. Anyone got any suggestions apart from demanding a refund? *This device doesn't work at all as an MP3 player as it is advertised to do. Add

  • Several questions in regards to Designer...

    Q1. Whenever I try to open up a Server Model Diagram in Design Editor, it stalls for over 5 minutes before opening. I've expanded the tablespaces but I'm still having that speed problem. What else can I do? Q2. How do I build a parent/child relations

  • Responsibility does not show up in External Web Tier

    Hi All, We have configured 12.1.3 instance with 1 DB Node, 2 Apps Nodes and an external web tier. Everything loooks good as per configuration but none of the responsibilities show up in the external web tier even after setting the profile option(RESP

  • Imported files won't convert

    I'm trying to import some of my own audio files (mp3 and wav formats) but when I do so they supposedly 'import' but won't convert and drop into the timeline. Other files (such as those I've downloaded from iTunes) work fine. I need some ideas about w