Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.
This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.
Similar Messages
-
Why does my ipod turn off by itself and then turn back on after up grading to ios 7
why does my ipod turn off by itself and then back on after upgrading to ios 7
Try the standard fixes:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Remote app on iPad connects to iTunes but then loses connection.
Hi,
Basically, I can get the app on my iPad to connect to iTunes, but if I then start doing something else on my iPad, or my computer goes to sleep, then the remote won't connect again. Even if I wake my macbook and try to connect it again.
If I press 'add an iTunes library' in the remote app, nothing appears on iTunes.
To solve the problem, I have to restart my computer.
I just checked to see if my iPhone connects and it worked straight away. Maybe its a problem with my iPad?
Can anyone suggest anything?
OscarI too have this problem and made it worse. Under Mavericks and iOS7 everything set up very easily and worked beautifully like Apple stuff usually does. Then a couple of weeks ago I took the dive and updated to Yosemite, iTunes 12 and iOS8 and then I would occasionally lose connection with my iTunes library as described by the second poster. Very aggravating. So I made a bigger mistake and deleted the library from my iPad Remote app and whenever I started it up again it would say 'Add a device'. I clicked and a randomly generated 4 digit number appears with the exact instructions: 'To add an iTunes library, open iTunes on your computer and choose Remote from the tab bar'. I went to iTunes and searched EVERYWHERE for this Remote tab bar and could not find it. I then went to iTunes Preferences: Devices and clicked the button 'Forget All Remotes' thinking this may reset something in iTunes and make the Remote tab appear somehow to start from scratch. Wrong! Now there is absolutely no connection between the Remote app on my devices and iTunes on my computer.
Can anyone point me to this Remote tab in iTunes?? If I can find that then I think I should be able to fix this.
Geez, talk about effing up what should be (and was) a very simple app. -
HT1947 Remote app on iPad no longer rotates after upgrade to iOS 7
I love Remote, use on both my iPhone and iPad. However, after upgrading the iPad to iOS 7, the app no longer rotates to horizontal view - in fact, it doesn't rotate at all. Bad enough no horizontal, but to not rotate at all means that I can't orient my iPad angled up, while having the power cord plugged in at the bottom?
Seems so strange that this would be changed - why? Maybe I need to re-install?
Help.
Thanks,
Brucesame issue iphone 4
-
Calls are Connected but Dropped After a Certain Time.
We have a FoIP envrionment and before I start blaming the software, I want to make sure that my routing is properly done. I'm able to place a fax call from one branch office to another but the call gets dropped.
RightFax ---------------à2811---------(out one of the ports of the FXO card)---------àVG248-------------àPSTN------------àFax machine
Attached are the trace of the Vg248 and the running config of the 2811 that I've got setup.
I've used the configuration guide http://docs.google.com/viewer?a=v&q=cache:7VWnAmhhiYIJ:www.cisco.com/application/pdf/paws/44948/faxvg248.pdf+configuring+vg248+to+send+fax&hl=en&gl=ca&pid=bl&srcid=ADGEESgxDmCbg_0MqYYK6Qx_H5yGJcJs-AhCsxgz1LUmi_XHxSLHwxo_DkBfH-NiR3u4HgycyXLy4IiCp9ax_wPbWefMuMTkZK1TBsxr29rmABT_Z7yk8VJSRY-6Iykhv6NTV3O9Uznz&sig=AHIEtbRxjPVEcT2XM3SHB_YW4Z4_97xB3w
for fax-passthrough to help me configure the ports on the vg248.
The dial-peer I'm using right now is this one...
dial-peer voice 6 pots
destination-pattern 91[2-9]..[2-9]...
information-type fax
fax rate fax
no digit-strip
port 0/0/0
Here is the result that debug vpm all showed me.
*May 12 16:09:15.110: htsp_timer_stop3 htsp_setup_req
*May 12 16:09:15.110: htsp_process_event: [0/0/1, FXOLS_ONHOOK, E_HTSP_SETUP_REQ]fxols_onhook_setup
*May 12 16:09:15.110: [0/0/1] set signal state = 0xC timestamp = 0
*May 12 16:09:15.110: dsp_set_sig_state: [0/0/1] packet_len=12 channel_id=129 packet_id=39 state=0xC timestamp=0x0
*May 12 16:09:15.110: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535, 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*May 12 16:09:15.114: htsp_timer - 1300 msec
*May 12 16:09:15.454: htsp_process_event: [0/0/1, FXOLS_WAIT_DIAL_TONE, E_DSP_SIG_0110]fxols_disc_clear
*May 12 16:09:15.454: htsp_timer_stop2
*May 12 16:09:15.454: htsp_timer - 1300 msec
*May 12 16:09:16.754: htsp_process_event: [0/0/1, FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER]fxols_wait_dial_timer htsp_dial
*May 12 16:09:19.194: htsp_process_event: [0/0/1, FXOLS_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]fxols_wait_dial_done htsp_progress
*May 12 16:09:19.194: htsp_timer - 350 msec
*May 12 16:09:19.198: htsp_call_bridged invoked
*May 12 16:09:19.546: htsp_process_event: [0/0/1, FXOLS_WAIT_CUT_THRU, E_HTSP_EVENT_TIMER]fxols_handle_cut_thru
*May 12 16:09:19.546: htsp_timer_stop
*May 12 16:09:19.566: flex_dsprm_forking_mixing_support:
*May 12 16:09:19.566: mars_flex_dsprm_current_codec_comp:DSP:0 FLEX Complexity Codec
*May 12 16:09:19.566: DSPWARE Version < 3.0 actual is 23.6.0
*May 12 16:09:19.566: flex_dsprm_forking_mixing_support:
*May 12 16:09:19.566: mars_flex_dsprm_current_codec_comp:DSP:0 FLEX Complexity Codec
*May 12 16:09:19.566: DSPWARE Version < 3.0 actual is 23.6.0
*May 12 16:09:19.570: htsp_process_event: [0/0/1, FXOLS_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]fxols_proc_voice
*May 12 16:09:19.570: htsp_process_event: [0/0/1, FXOLS_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]fxols_proc_voice
*May 12 16:09:27.930: htsp_process_event: [0/0/1, FXOLS_OFFHOOK, E_HTSP_VOICE_CUT_THROUGH]fxols_proc_voice
*May 12 16:10:00.574: htsp_timer_stop3 htsp_release_req: cause 127, no_onhook 0
*May 12 16:10:00.582: htsp_process_event: [0/0/1, FXOLS_OFFHOOK, E_HTSP_RELEASE_REQ]fxols_offhook_release
*May 12 16:10:00.586: htsp_timer_stop
*May 12 16:10:00.586: htsp_timer_stop2
*May 12 16:10:00.586: htsp_timer_stop3
*May 12 16:10:00.586: [0/0/1] set signal state = 0x4 timestamp = 0
*May 12 16:10:00.586: dsp_set_sig_state: [0/0/1] packet_len=12 channel_id=129 packet_id=39 state=0x4 timestamp=0x0
*May 12 16:10:00.586: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535, 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*May 12 16:10:00.586: htsp_timer - 2000 msec
*May 12 16:10:00.586: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535, 1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*May 12 16:10:00.590: flex_dsprm_close_cleanup
*May 12 16:10:00.854: htsp_process_event: [0/0/1, FXOLS_GUARD_OUT, E_DSP_SIG_0110]
*May 12 16:10:02.586: htsp_process_event: [0/0/1, FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER]fxols_guard_out_timeout
*May 12 16:10:02.586: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535, 1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*May 12 16:10:02.586: dsp_req_sig_state: [0/0/1] packet_len=8 channel_id=129 packet_id=40
*May 12 16:10:02.586: htsp_process_event: [0/0/1, FXOLS_ONHOOK, E_DSP_SIG_0100]Sorry...here is the roadmap to how a call is being placed.
faxserver==h323==2811==fxo==vg248==CUCM==PSTN GW==PRI==PSTN=====Fax machine.
I've figured out that there was no Clock line on the controler and the 2811 was using the default dial-peer 0 instead the inbound dialpeer. the problem changed from dropping the call (or timeout) to Line is Busy and the fax server drops the call after 2 secons.
I did a debug isdn q931 and it showed me the following:
000084: *Feb 6 16:26:15.383: ISDN Se1/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0221
Bearer Capability i = 0x8090A2
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98316
Exclusive, Channel 22
Calling Party Number i = 0x0081, '9055408208'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '16137883600'
Plan:Unknown, Type:Unknown
000085: *Feb 6 16:26:15.483: ISDN Se1/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8221
Channel ID i = 0xA98396
Exclusive, Channel 22
HAMVGP01_3725#
000086: *Feb 6 16:26:17.179: ISDN Se1/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x0221
Cause i = 0x8090 - Normal call clearing
000087: *Feb 6 16:26:17.431: ISDN Se1/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x8221
000088: *Feb 6 16:26:17.443: ISDN Se1/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0221
HAMVGP01_3725#term no mon
000089: *Feb 6 16:26:27.215: ISDN Se1/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x838E
Cause i = 0x8090 - Normal call clearing
000090: *Feb 6 16:26:27.331: ISDN Se1/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x038E
000091: *Feb 6 16:26:27.343: ISDN Se1/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x838E -
Remote app on iPhone 5S stopped working after iOS8 upgrade
I upgraded my iPhone 5S to iOS8 (and the subsequent updates too). I received the automatic update to the remote app. Since that time the remote app does not work. I have home sharing working on my Apple TV, MAC Pro and a Windows 8.1 PC. These devices are all connected to Home Sharing and it works fine. At this moment I am streaming music from my iTunes library on the Windows 8.1 PC on my Apple TV. A short time ago I was using Airplay with my MAC to watch an internet TV show. So all is well with Home Sharing. On the remote app I sign in to home sharing and it acknowledges that I am connected to home sharing. However, the next screen reads: "Turn On Home Sharing in iTunes on your computer or on Apple TV using xxxxxx". xxxxxx is replaced with my Apple ID. That's it. That's all I get. Cant get beyond that screen. I have deleted and reinstalled several times. I have logged into Home Sharing each time successfully and I ge the same screen. My Wi-FI is high speed AB and is working fine. Could use some help.
I have a similar issue with some different quirks... I have my PC (Windows 7) running off the wi-fi. My router is an Airport Extreme. I also have an Airport Express in my garage for my outdoor speakers. Both upstairs and downstairs TV's have Apple TV. The Apple TV's and the Airport extreme AND my iPhone 5s are all on the same wi-fi network.
I have the remote app on my iPhone and it always always always accesses either Apple TV without issue. BUT it doesn't usually find the iTunes library on my computer. And once I do get it connected it only holds for a while before losing it again. In order to have the remote app find it again, I have to go to the PC, turn off Home Sharing and then turn it back on again. My remote app then sees it again and I am back in business...for awhile.
I have been through every troubleshooting list on the internet and can't find a resolution to this. iTunes is the latest version, i'm running ios8 on my phone etc etc etc. The whole point of the Airport Express was to be able to access the iTunes library from the back yard. When it is working it works beautifully. When it drops...frustrating.
Anyone else have this situation? It's not that it won't connect...it's just that it only stays connected for short periods of time. -
Would appreciate in connecting Remote App on iPad to iTunes. It used to work find, before iTunes 11.0 - but now pop up window to input 4 digit code does not appear. Any ideas how to prompt window to open on iMac? Remote App works OK, but says that Home Sharing is not Turned On, although it is. Both devices are logged into my profile account.
You no longer need the 4 digit code in iTunes 11.
iTunes (10.0.1 or later)
Open iTunes on your Mac or PC.
iTunes 11 or newer: Turn on Home Sharing in iTunes by going to File > Home Sharing> Turn on Home Sharing.
iTunes 10.7 or older: Turn on Home Sharing in iTunes by going to Advanced > Turn on Home Sharing.
Connect iPhone, iPad or iPod touch to a Wi-Fi network that is connected to the local network that your Mac or PC is also connected to.
Open the Remote app (software version 2.0 or later) on your mobile device.
Turn on Home Sharing in the Remote Settings screen. Make sure to sign into the same Home Sharing account you used to sign in to from iTunes on your computer.
Once Home sharing is enabled for both your computer and your mobile device, Remote app will be be able to view and control audio and video playback in your iTunes library.
http://support.apple.com/kb/ht1947 -
Remote app for iPad Wont show songs but iPhone Will
Hi All
I have a Strange problem with airport Express and airtunes
From my iPad 4.2.1 running Remote app for iPad if i search for an artist, like Gary Moore, it shows the artist name, but when i Press the name it doesnt display the songs with this artist, it says no songs found.
But if i use the same app on both my iPhone 4 and my iPod touch, and do the same search and Press the artist name, it shows All the songs that i have with this artist
Both the iPad and the iPhone connects to the same airtunes library, on the same machine with iTunes 10.1?
Does anybody have any ideas of what is wrong
I have tried to reinstall the app on the iPad, but that diednt work, i have tried to delete the library on the iPad with no luck
Aby help would be apreciated
Sincerely
Carsten Larsen
mac mini Mac OS X (10.6.3)I know this is an old question, but I had the same problem and found the solution somewhere else and thought I'd post it here as this thread comes up when googling for the answer.
It appears as though any songs without an "Album" don't appear. In iTunes select all songs without an album, right click and select "Get Info" and give them an Album name (e.g. "Unknown" or "Singles"). This might also apply to songs without other tags. -
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
Can't get Apple Remote App to stay connected to my ITunes library.
I recently had my modem and router taken out by lightening. So I replaced them both with what is supposed to be the latest and greatest. Simultaneously, Apple had a new version of ITunes, so I updated. Now I can't get the Apple remote app to stay connected to ITunes. If I start ITunes on my computer, my IPhone 5 will see and connect to the library, as well as my IPad. But as soon as my IPhone or IPad goes to sleep and I try to reconnect to the library, it can't connect to the library. I've never had any connection problems before and not sure what is causing the problem. I can turn off Home Sharing in ITunes and turn it back on again, or restart ITunes and it works, but as soon as the IPhone or IPad goes to sleep, it won't reconnect again. Is this a router issue or ITunes Home Sharing issue? Any input to resolve this will be greatly appreciated..............because it is really annoying not to be able to control music the way I did before! All products have the latest updates.
Take it back and exchange it.
If the remote doesn't work out of the box new then either remote is faulty or AppleTV is faulty (eg IR sensor not located properly in the case).
Either way one of them isn't working, exchange it. -
I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.
You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network. -
I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Unable to see Remote App and Desktop Connection in Group Policy Management Editor
I am unable to see the Remote App and Desktop Connection in Group Policy Management Editor on my 2012 R2 DC. I am therefore not able configure the connection URL in Access RemoteApp and desktops in our Windows 8.1 client environment.
Within the Group Policy Under User Configuration, Administrative Templates, Windows Components all I see is:-
RD Gateway
Remote Desktop Connection Client
Remote Desktop Session Host
But NOT
Remote App and Desktop Connection
Which I need. Is there anyway of adding this?> I am unable to see the Remote App and Desktop Connection in Group Policy
> Management Editor on my 2012 R2 DC. I am therefore not able configure
> the connection URL in Access RemoteApp and desktops in our Windows 8.1
> client environment.
http://gpsearch.azurewebsites.net/#8113
Do you use a central store for ADMX? Is this central store out of date?
(Means "still contains ADMX from W7/2008R2")
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Can't set up FiOS Mobile Remote app for iPad
I was able to register the FiOS Mobile Remote app for iPad with my login and password but I'm not able to set it up.
I follow the instructions to
click Menu
click Widgets
click FiOS Mobile Remote
I get the following error message:
Mobile Remote
Network Error
Unable to process your request at this time.
Please try again.
If the broblem continues, please try restarting your Set-Top Box
I've turned off the power to the cable twice but still get the same message.
How can I get the app working?I installed my new DVRs last night and tried to reactive the Mobile Remote app, but got the same error. I wonder if they're having issue with the app (so it's probably not just you).
-
Has the IOS update on my Ipod caused the Apple TV Remote App to have connection problems?
I recently updated the software on my IPod Touch and now the Apple TV Remote App won't connect to the Apple TV. Home Sharing is turned on for both my computer and Ipod. ITunes and the IPod have both been updated. Is there an issue with the new software?
Did you update the OS on the Apple TV?
My iOS 7 devices work fine with my update Apple TV3
Maybe you are looking for
-
Time capsule USB printer works when I connect via ethernet but not over wifi
I have a USB printer hooked up to my new Time Capsule. If I turn off my wifi and connect to the Time Capsule with an ethernet cable it works fine. When I try to do the same thing over wifi (even when I'm sitting next to it) it cant seem to make a sol
-
Work Flow - Target Limit - Credit Memo
Hi, Is it possible in workflow that whenever the credit memo requests value exceeds the invoice value, then a email notification has to be sent to a set of authorized persons for removal of billing block. EXAMPLE: We have created credit memo requests
-
Why do we need MTP in the SIP trunk for CVP warm transfers
Hi All, Why do we need to enable MTP in SIP trunk between CUCM and CVP for CVP based trasnfers??? Thanks in advance!! Regards, Thammaya Gupta K.
-
i forgot i pre-ordered an album until it notified me saying it was available to download however i didnt want it anymore so ive cancelled the pre-order - have i been charged and will be refunded or will i not have been charged yet? thanks.
-
Installer won't initialize, "missing file"?
Hey all, I'm pounding my head against the wall here trying to install CS6 Design Standard on my Mac (OSX 10.7.3). I first tried to install last night, and everything seemed to be going just fine. The installer opened, I entered my serial number and s