Remote Desktop cannot verify that this server belongs to the same server farm

Hello Team,
I am running Windows Server 2012 in my environment. I have 2 RDS Servers which are configured for load balancing. RDP to these hosts works just fine. But when i connect to any published remoteapplication , it gives me an error
Remote Desktop cannot verify that this server belongs to the same server farm.
What am i missing here, kindly suggest.
Binu Kumar Small Business Server Support

Hi Binu,
Do you have any progress?
If not, please make sure that the RD web access URL is configured as the farm name on each Remote Desktop Session Host server.  
Here are some related threads below for you:
TS Web with TS Farm on W2K8 servers
https://social.technet.microsoft.com/Forums/windowsserver/en-US/09715e58-6e52-4c39-b445-4aa8fbc31cb0/ts-web-with-ts-farm-on-w2k8-servers?forum=winserverTS
RD Session broker issue; Cannot connect to one of the host servers through RDC
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b9c15a01-a9cb-4793-8758-acd2e60ae7a5/rd-session-broker-issue-cannot-connect-to-one-of-the-host-servers-through-rdc?forum=winserverTS
RemoteApp - Cannot verify computers belong to the same server farm
https://social.technet.microsoft.com/forums/windowsserver/en-US/40be1eda-f752-4b64-bb47-dbe2156218f9/remoteapp-cannot-verify-computers-belong-to-the-same-server-farm
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

  • Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

    Hello.....
    I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
    This issue is with only three servers in the environment
    "Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
    The date/time is correct on the server when i checked in the console session of the server
    Can see below messages in event logs
    Event ID 1014:
    "Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
    Event ID 1053:
    The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
    a) Name Resolution failure on the current domain controller.
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Any thoughts ....

    Hi,
    Have you tried to connect these three servers with IP address instead of computer name or DNS name?
    Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
    For more information please refer to following MS articles:
    Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
    Cannot connect via Remote Desktop
    http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
    Lawrence
    TechNet Community Support

  • Apple TV cannot see my computer even though I have verified that both are set to the same home sharing network. I can see my music and Netflix but not photos.

    Applw TV cannot "see" my computer even though I have verified that both are set to the same home sharing account. The router works OK as Netflix comes through as does access to music.

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting Homesharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings

  • Remote Desktop cannot verify?!?!

    So I'm very ticked right now... I bought my father an iMac for Christmas, and he lives across the country in Florida (I'm in California). When I went home for the holidays, I set up everything on his iMac and turned on "remote management" on his machine. I have Apple Remote Desktop 3.5.1 on my 15" Macbook Pro (running 10.7.3) I tested out ARD on my machine, and controlled his machine with ease. I was able to log in to his machine when I was in the house with no problem... I now returned back to California with a nightmare of this. I can't connect to his machine at all now... I have the IP address for his machine, username and password and I keep getting this ridiculous "verification failed" error. I try "adding anyway" and it just says the machine is offline. What is the deal here!??!?!
    The whole point of me doing this is to help my father out while I'm away, and I can't figure out why the **** this won't connect.... I verified that he has remote management turned on (allow access for all users, all local users can observe, control) Any help would be greatly appreciated. Thanks.

    In my opinion, ARD is really meant to be an enterprise product for buisnesses.  In fact the product used to cost $400.00.  I really wish Apple would spell that out clearer now that they dropped the price.
    Not knowing what your Dad's network set up is like, I will make the assumption there is a DSL or Cable Modem and a consumer flavor firewall involved like one of the Linksys products.
    I think the key point you need to look at, is using Port Forwarding on the remote firewall, (if there is one).
    It is certainly possible to access a remote computer through the internet using ARD.  ARD really is not geared to this task very well due to the fact, most enviroments are using a version of NAT known as PAT, (Port Address Translation). PAT allows many internal hosts to share a single external IP address.
    When trying to connect to the remote machine using the external address of the firewall, unless Port Forwarding is configured, the firewall doesn't know what to do with the packet and simply drops it. (In effect doing what it's supposed to do).
    Using Port forwarding you can "MAP" the external address along with ports 5900 and 3283 to the internal address of that remote computer again using ports 5900 and 3283. This is a fairly simple configuration on most consumer firewalls. (I have done this, so I know it works).
    You then enter the external address of the firewall to access your Dad's machine.  Please note, unless your Dad is set up using a static IP address from his ISP this address is subject to change and will.
    Antother thing to note, some DSL or Cable modems may NOT be set up in bridging mode or have firewalls built into them.  This may be another thing to address if adding port forwarding doesn't work. I have encoutered that issue in the past. Most modems allow the mode to be changed. If not placed in bridging mode, the network is in essense double NATing the address if using a seperate internal firewall.
    As Teen Titan mentioned, logmein might be a simpler approach but this approach has worked for me.
    I hope that helps.
    Gary

  • How to create Report Server Cluster in the same server

    Hi, i have created two standalone report server and i want to cluster both server... how i do that?
    OAS 10.1.2.0.2
    Form/Report Services (no infra)
    OS Suse 9 sp2

    Hi,
    If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
    Thanks
    Sunny

  • Can I install two versions of NW in the same server?

    I have BW installed in a server running on Netweaver 7.3. but I need to install Netweaver 7.02 to do some tests, is it possible to install this other version in the same server? or will there be conflicts after the installation of the second version?
    Thanks in advance,
    Luis.

    HI,
    sapinst detects existing instances, and makes sure that you dont use the same instance numbers => same tcp ip ports for diferent sap instances, wich would cause conflits.
    so in the limit you can install any number os sap systems on the same host, given you have enought hardware resourses.
    best regards,
    Ricardo Caramona

  • Mdt 2012 + WDS service on the same server. DHCP question

    Hi,
    I am using MDT 2012 on Server 2008.
    Boot images are placed on 6 years old WDS server running on 2003.
    I need to remove WDS server (2003).
    Cannot find exact instructions for enabling PXE for MDT2012.
    I don't need introduction guides. But clear few lines of instructions.
    From quickly checking web I understand that I need:
    1. install WDS services on the same MDT2012 server 2008.
    2. import Lite Touch boot images from Deployment Share
    The only point I am missing is DHCP question. In Microsoft prerequisites for WDS services, DHCP should be present on the same server were WDS is...
    I watched one video on web and the guy just installs WDS on the MDT server and not mentioning DHCP at all.
    Sure that there is DHCP server serving multiple subnets on the network.
    My confusion about DHCP on WDS prerequisite comes from not having DHCP services installed on old WDS 2003 machine.
    So why it is required on WDS service in server 2008/2012?
    Can somebody confirm that DCHP must exist on the same server were MDT and WDS services are enabled.
    And is it a valid option to have all 3 on one Server machine if DHCP is really needed for enabling PXE in MDT environment?
    I saw the info about ports 67 (should be disabled) and 60 for PXE enabled.
    Will appreciate DHCP part explanation and how to...
    Thanks.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    RL69,
    in my environment DHCP serves multiple subnets. For now no need to serve client machines on different subnets. The Deployments will be done on subnet were MDT resides. If necessary PXE relay could be enabled on Core switch (or where necessary).
    So if I understand correctly for a scenario above all what I need to do for PXE enabled MDT is:
    to add WDS role/service on the same MDT server and import boot images.
    Right?
    Will do it right after your confirmation :)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Cannot find web address. Verify that this web address is valid

    Hi guys,
    I have an 8310 and and I get "Cannot find web address. Verify that this web address is valid" when I try to listen to radio on yourmuze.fm or when I try watching videos on youtube. I've tried several things but non of them have worked. Any advice will be greatly appreciated.
    Many thanks,
    Gabriel

    Take a look in Blackberry App World and select the Top Free listings -
    Number 19 in the current list is "Xenozu YouTube player" -
    It's free but doesn't have very good reviews - might be worth trying though as it could be better than nothing !
    If you found my answer ( or anyone else's ) to be helpful, don't forget to click the Kudos button !

  • Apple Remote Desktop CANNOT observe/control/curtain 30" Cinema Display

    Apple Remote Desktop CANNOT observe/control/curtain 30" Cinema Display. All my other pc's (G4, G3, titanium, 17" Powerbooks and Macbooks) can be observed, using identical settings. i figured out that it may be the graphics card while trying to Microsoft Remote Desktop Connect to the Macbook running XP, the system crashed due to the (well known as really bad) ATI mobility XP drivers provided by bootcamp. So i quess the problem is the dual link in my G5 running on the 30". All the other remote desktop commands run fully ok. i just cannot get visual feed.
    Any thoughts??
    Thank you all in advance
    Dual G5, Dual G4, G3, 15" titanium, 17" Powerbook, 17" Macbook   Mac OS X (10.4.7)  

    I've had this problem, too, recently. I have two G5s running 30" displays, I'll describe my situation - it may come down to your video card.
    When I try to connect to one of the G5/30" on my network (a PowerMac 7,2, 512MB, running a GeForce6800 Ultra), it sporadically gives me the same non-visual problem you're having. But every now and then, I can connect, and can't figure out why. A lot of times in the ARD multi-observe window, it reports that this machine is maxing out the memory (98.7%, putting it in the red)
    However, when I try to connect to another G5/30" on the network (a PowerMac 7,3, 512MB running an ATI Radeon 800 XT), I DO get a visual.
    Maybe others know of known deficiencies in ARD/NVidia connections? Or maybe it has to do with the paltry RAM in the machine?
    Mark

  • Error message when installing iTunes on my PC:  This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that  this is a valid Windows installer package

    Error message when trying to install iTunes on my Pc:
    Using Windows 7, had to replace hard drive.  HELP!!
    This installation package could not be
    opened. Verify that the package exists
    and that you can access it, or contact
    the application vendor to verify that
    this is a valid Windows installer package

    Hello JAH1961,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package"

    I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?

    Hi
    Try the following:
    Uninstall iTunes and Quicktime
    Reboot
    in the task tray right click the quicktime icon and click exit.
    navigate to the folder in program files and remove the quicktime directory and all its files.
    Reboot.
    Now try install iTunes and quicktime and it should work
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I am trying to download iTunes to my Sony PC,  but "This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."

    mI am trying to download iTunes to my Sony PC, but I keep getting the following error after initial download attempt:
    "This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."
    I have Windows 7 Home Premium, Service Pack 1.
    Any help is greatly appreciated.

    Hi gump68,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful if iTunes is not installing on your PC:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    All the best,
    Jeremy

  • HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

    whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

    Let's check your Windows system.
    1.  Have you done all the important windows updates and service Packs on your system.  If not do it now.  START button, type in Windows Update and ENTER.  Select 'CHECK FOR UPDATES'
    2.  Let's check your Windows system files for possible file corruption
    SCAN and repair possible Windows system file corruption:
    Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer if it did actually repair any files.
    3.  Check your system for possible Malware.  But you have to do it in WIndows Safe Mode.
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

  • When i try to instal itunes on pc i get this message.      This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack.  HELP

    when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

    Hello annesmith1954,
    Thank you for using Apple Support Communities. 
    You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC. 
    "Could not open key" message when installing iTunes or Apple components for Windows
    Regards,
    Jeff D. 

  • This installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package

    this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package how can i istaller itunes in my laptop windows 7 64 bits

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Maybe you are looking for

  • Oracle 9i +connect by alternative for using NOCYCLE

    Hi all, i struggling with the problem of using a hierarchical query where loop data should be discarded. upgrade to oracle 10 so i can use nocycle is not an option is there another way to achieve this? or is there equivalent for this? regards robert

  • Re:Assign Profit center as mandatory in va01

    Hi Gurus, Good Afternoon to you, I have a doubt in Order type for few order types i need to mention particular profit center(abc123) as mandatory so can anybody tell me where i need to assign the profit center in that particular order types. The purp

  • Home name in browser

    My site is tagged "Home" when viewing in the browser or bookmarking, how would one rename this to reflect our corporate name

  • Program send from uni code system to XI

    I will send data from uni-code system to XI system but I need to sent using non-unicode mode (setting RFC) But I have a problem when I sent data กรกช Data will determin in SAP XI as "####" how can I do? Best REgards, @tom

  • ECC 6.0  Installation Issues

    Hi  Guys, I am installing SAP ECC 6.0 (My Sap ERP) after Installing SolMan4.0 ,  After runing 21 of 49  process it has showing "Installation phase in Progress"  but is not moving  as of now it's taken nearly 14 hrs. this current process "Import ABAP"


HashFlare