Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
or what's the problem,
Mahmoud Sabry IT System Engineer

this issue maybe will be fix by latest version, we still waiting for it
maybe your issue can be fix using this methods
https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
http://shawn.meunier.com/?p=1#comment-43

Similar Messages

  • Server 2012: Remote desktop licence manager not issuing licences

    Hi,
    I am battling with an problem which i cannot seem to resolve and no other forums actually come to a conclusion on how to resolve this problem!
    I have a windows server 2012 server which is NOT part of a domain.
    I have installed Remote Desktop Services and also installed the Remote Desktop License manager and i just cannot get the license manager to issue cals when users connect remotely via RDP
    I have installed an extra two CAL's and tried using them as both a "Per User" and also "Per Device" but still does not work.
    I have now run out of my grace period and cannot connect to the server at all
    I have also tried changing some gpo's with no luck, 
    Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
    "Use the specified RD license servers" = myservername
    "Set the Remote Desktop licensing mode" = Per User
    How can i fix this?
    Thanks

    Hi,
    Thank you for posting in Windows Server Forum.
    Have you seen that you have activated RDS License server before installing CAL?
    Please check that the License Server should be part of ‘Terminal Server License’ group in Active Directory Domain Services. You can also configure RD License server manually by powershell commmand. Please check below article for information.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    In addition, please install below Hotfix and verify the result.
    No RDS license when you connect to an RDS farm in Windows Server 2012
    http://support.microsoft.com/kb/2916846
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

    We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
    2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license.  Please contact the server administrator. whilst logging into the server. 
    We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon. 
    I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured.  I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
    resumed to stop, here I assume its where the licensing part comes in to re-enabled this. 
    I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install  the overview part that I cannot get into,
    because I think we have to be is AD DS for this which we don't.  Is there a way around this for non domain / just standalone set-up?  Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work? 
    Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard?  We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
    to reinstall other programs.  I have installed  Server role service of Remote Desktop Licencing and automatically installed other associated services needed.  in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
    where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
    10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.  
    I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there.  I haven't restart the services of Remote Gateway / the server itself; do I really
    need to reboot server?  
    Any advice / guidance would be very much appreciated and this is a urgent matter.  
    Thank you for your time.

    Hotfix Released here:
    http://support.microsoft.com/kb/2916846

  • Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

    Hello, dear colleagues.
    We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info). 
    Send Message, Disconnect, Logoff options works only for users in Administrators group.
    I can't to configure permissions for Remote Desktop Users, specific user or AD group. 
    To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
    RDP-Tcp, Security tab, add specific user account , AD group or configure
    advanced permissions
    for Remote Desktop Users.  
    But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
    Thanks.
    P.S. If move specific user from Remote Desktop Users group to Administrators group on
    Windows Server 2012 R2 - it works. 

    Hi,
    You can prevent administrators from changing the permissions for a connection by applying the
    Do not allow local administrators to customize permissions Group Policy setting. 
    This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
    Apart there is one command with which you can set the permission for that check the related
    article. Additionally checkthis
    thread for more detail.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is there a way to Report out Remote Desktop Gateway Manager Monitor data?

    We are running Windows Server 2012 R2 Remote Desktop Services configured to provide a managed pool of VMs through a RD Gateway server. Everything is working well. We would like to generate a regular report on the information that shows up in the Gateway
    Monitoring window about connections and users etc. Is there any way to generate such a report without purchasing 3rd party software?

    Hi,
    Based on my experience, you can use Remote Desktop Gateway Manager to view information about active connections from Remote Desktop Services clients to internal network resources through an RD Gateway server. However, there is no such options in
    RD gateway manager to create reports for that.
    It seems that System Center Operations Manager can monitor Remote Desktop Gateway Service and the number of sessions that run through the RD Gateway are monitored.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Users not showing in Terminal Server Under Remote desktop services manager and Task Manager

    Hi All,
    I have a problem here in Terminal Server. I can not see the users logged in to Server but i know users are accessing the files and currently working.
    1. From the Task Manager-- Show processes from all users displayed all the processes accessing by users.
    2. From the Task Manager-- From Users Tab--No users list at all
    3. From the Command Prompt- Query users-- No information
    4. From the Remote desktop services Manager-- used with IP/Host name-- Still can not see the users list and processes. So i can not kill the session if needed.
    Enviroment:
    TS CALS 20 currently accessing 15 users
    VM-WARE GUEST: 2008 RS Terminal Services/Remote Desktop services installed
    Windows up to date-- Just updated last month
    Problem is here for long time. Just couldn't find the time to trouble shoot.
    UMESH DEUJA MCP,MCTS,MCSA,CCNA

    Hi,
    Thank you for posting in Windows Server Forum.
    As you have tried many steps, I suggest you to try below command line and power shell command if successful in your case. Please try below command with Admin access:
    qwinsta /server:<servername>
    To kill a session use rwinsta to delete the session specifying the ID number:
    rwinsta /server:computer01 3
    Here's the list of command line tools for Remote Desktop Or, you can use PowerShell:
    Get-RDUserSession and Disconnect-RDUser
    Please check the list of Power Shell command from
    this link.
    Hope it helps!
    Thanks,
    Dharmesh

  • I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

    I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

    Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

  • Remote Desktop Services Manager Hangs / Crashes

    Hi,
    I have windows server 2008 R2 based remote desktop environment. When i access remote desktop services manager to manage domain users session, it hangs / crashes. I am not unable to add any other computer to manage as well. Same was working fine in Windows
    server 2003.
    Any valuable suggestion????
    Regards
    Rox_Star

    Hi,
    As a test, please create a new domain admin user account, log on to the server with it, and then open RDS Manager.  Do you see the same issue with the new account?
    Thanks.
    -TP

  • Error "The remote connection was disconnected because there are no Remote Desktop License Servers available to provide a license. Please contact the server administrator"

    Hi,
    I have been using Windows server 2012 at my company and generally take a remote access to this server. However, since last few days, I have been receiving the Error "The remote connection was disconnected because there are no Remote Desktop License
    Servers available to provide a license. Please contact the server administrator". 
    My entire work has come to a halt because of this error as all my applications are running this server and their remote access is needed for my regular requirements. 
    I had tried one of the solutions proposed at one of these forums especially using gpedit.msc but to no avail. 
    Regards,
    Aditya

    Hi Aditya,
    Thank you for posting in Windows Server Forum.
    Agree with the words of armin, please verify that you have properly installed correctly. Verify RDS Licensing service running on License Server. Verify that the client, the RDS server, and the license server can communicate by ensuring that Domain Name System
    (DNS) is configured correctly on each computer. You can run the ping command from each computer to each computer using the IP address, FQDN, and the NetBIOS name. If any of the ping commands fail, verify the DNS configuration on the network.
    In addition, you can also try “GracePeriod” registry setting on this path (HKLM\System\CurrentControlSet\Control\Terminal Server\RCM) from
    this article.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator

    Hi,
    I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
    Remote desktop Session Host Server Configuration Details:
    The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
    Number of license available for clients : 0
    Remote Desktop Session Host server version: Windows server 2012 R2
    Active Directory Domain : Not applicable
    Licensing mode  : Not configured
    Now, Down I am getting this error as well shown by the system:
    RD licensing Diagnoser Information- 2 errors:
     Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
     Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
    unless a license server is configured for the RD Session Host server.
    Now my kestion is :
    Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
    Do I need to configured only  RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
    Do I just buy the RDS client access license (L).
    Please could you help on this, am new in windows server?

    Hi,
    As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
    to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
    References:
    Understand the licensing grace period
    http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
    Install and issue RDS CALs or TS CALs
    http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
    Remote Desktop Services Client Access Licenses (RDS CALs)
    http://technet.microsoft.com/en-us/library/cc753650.aspx
    Specify the Remote Desktop Licensing Mode on an RD Session Host Server
    http://technet.microsoft.com/en-us/library/cc754487.aspx
    Specify a License Server for an RD Session Host Server to Use
    http://technet.microsoft.com/en-us/library/cc770585.aspx
    Meanwhile,
    1. AD is not required for RDS. However, it is recommended.
    2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
    How to buy Windows Server 2012 R2
    http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
    Best Regards.
    Jeremy Wu
    TechNet Community Support

  • Windows 8, Error: "Can't connect to this network"

    I have wracked my brain, my colleague’s brains, and used my googlefu to no avail.
    I have a Win8 basic (cheapest OS) HP tablet 1000G2 that I am having troubles with. I have a network that requires WPA2-Enterprise with PEAP. It will not connect to this network, it will however connect to a neighboring network without
    any security settings. I have fixed this issue once before and the same fix is not working.
    The kicker... I have another exact same tablet that we got the same day... No issues connecting
    Problem: It does not take the security settings that the server is prompting for. It prompts me for my credentials, but gives this error: "Can't connect to this network"
    I did research last time and the collective reason was that the security settings weren't correct.
    Solution that worked last time:
    Connect to a network with open sec settings.
    Open network and sharing center
    Change adapter settings.
    Right click wireless adapter click status
    Wireless properties.
    Security tab.
    Change my network settings
    Reconnect to my network
    The tablet has been fine until today. These steps above do not resolve the issue anymore.
    THERE IS NO VIRUS PROTECTION BESIDES WHAT WINDOWS OFFERS ON THIS DEVICE!
    Troubleshooting steps I have tried: deleting all the wlan profiles with
     http://windows.microsoft.com/en-us/windows-8/manage-wireless-network-profiles
    and used http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-laptop-wont-connect-to-the-wireless/256c8bd2-e11f-4746-b3aa-3e6eb8305b56 page.
    Change any properties one at a time that I thought might deal with this.
    Removed all HP bloatware/3rd party connection managers.
    Troubleshooting I tried last time:
    Uninstalled and installed adapter drivers.
    Tried the windows diagnose
    Googlefu "Can't connect to this network" and you come up with a bunch of pages I have clicked on them and none of the solutions have worked.
    Please if you have any solutions let me know! I am at my wits end with this dang thing.

    These are all logical ideas, but alas I have already checked all of this. We do not have any blocking other than credentials(which are not locked and are correct). The amount of connections would be determined by how many IP Addresses that I have(which is
    a ton). Not the wireless router, because we have many other devices that connect to it just fine. No mac filter. No the other pc isn't connected. No it is only connecting to one network.
    I should mention that this is in an enterprise and not an at home network. It is a WAP not Wireless Router.

  • Pc with windows xl/sp3 can't connect / acquire ip address from airport extreme; meanwhile, my macbook in connecting fine.  We have a wpa2 personal password

    My husband's Dell with Windows xl (sp3) can't get an ip address from our new airport extreme.  Nor can my daughter's Windows 7 computer.  There are no firewalls in place.  Both computers worked with my old Airport, though it was sssslllllllowwww.  My Macbook works fine and is super fast compared to the old airport.  We are using a wpa2 personal password. 
    Anyone out there have a cure for this problem so we can hook up those sad pcs?
    Thanks a lot.
    Elizabeth

    First, make sure that the new Airport is configured exactly the same as the old one. Hopefully you saved the configuration settings in a file and can look at them to be sure.
    If the Windows PC's can't connect with the same password, it's possible that the PC's were using an older wifi protocol like 802.11a or b.  The new Airport is backwards compatible but has to be setup that way check to see what versions of 802.11a the windows computers support and make sure that the wireless mode of the airport is setup to accomodate them.
    Can the PC's get an IP address if they are connected to the AirPort using an ethernet cable? If they can, that would help naorrow things down to a wireless issue and not some other configuration problem.

  • Windows 8 PC can't connect to Verizon Jetpack MiFi 5510L

    I have a Verizon Jetpack MiFi 5510L and I am unable to get my Windows 8.1 PC to connect to the Jetpack. My iPhone 5 with iOS 7.0.4 and my Lenovo T400 running Windows 7 Ultimate can both connect to the Jetpack with no issue or changing of settings. The Jetpack's WiFi network is visible to my Windows 8 PC (ASUS V500c), but the Windows 8.1 PC cannot connect to it. The Windows 8.1 PC connects to my home wireless network and wireless hotspots in multiple locations just fine. Any help would be appreciated.

    I tried everything in the posts, several times, without success, since I'm not sure what parameters to provide. For example, set profileparameter name=<name> authentication=wpa encryption=tkip authMode=userOnly returns an error message The oneX setting in the profile <profile> on interface "Wi-Fi" is not enabled. I've fiddled with a few settings, but nothing that seems to work.
    A coherent, step by step, solution would be nice.

  • After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

    After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

  • My iphone suddenly can't connect to itune but my ipad can still connect.

    my iphone suddenly can't connect to itune but my ipad can still connect. i am using window 7 and the latest itune.

    Did a diagnostic test and this is the result.
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    TOSHIBA Satellite P850
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 772513C00B220A08
    Current user is an administrator.
    The current local date and time is 2015-01-29 01:18:49.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is not supported. (16002)
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 630M 
    Intel Corporation, Intel(R) HD Graphics 4000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26.  Device is working properly.
    Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D.  Device is working properly.
    Intel(R) USB 3.0 eXtensible Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano running firmware version 1.3.1
    Serial Number: 7L******SZB
    iPhone 4 (GSM) running firmware version 7.1.2
    Serial Number: 68*****QA4S
    iPad (3rd Generation) (Wi-Fi + Cellular) running firmware version 8.1.2
    Serial Number: DYVH******GH
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

Maybe you are looking for