Remote desktop not working on mountain lion

My ARD does not work on Mountain Lion. The software opens but all I get is the menu at the top, and my only working option is to quit. I spoke to Apple support and they suggest (as they usually do) to reinstall the whole operating system, but I can't accept this as a valid answer as everything else works. There must be a way to fix this without having to reinstall a machine that came originally with Mountain Lion!

I was able to fix my issue by just uninstalling ARD (I used AppZapper) - and just reinstalling it - no "Archive & Install" required - best of luck with your situation!

Similar Messages

  • Facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

    facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

    No third party applications installed; no gestures changed. It just starts acting up like I described a few times a day. I'll be browsing the internet and go to switch desktops and it suddenly doesn't work.

  • Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .

    Dashcode is not working in Mountain Lion. I tried updating to Xcode 4.4 and it still did not work . . .
    I use dashcode for most of my coding needs, so it is very important to me!

    I have the same problem too. dashcode shows up in the finder but its just a question mark (see screenshot). Anyone found a way to address this?
    Thanks!

  • Magic mouse not working in mountain lion

    magic mouse not working in mountain lion....What can I do?

    Have you tried a fresh set of Alkaline Batteries?
    Was  it ever paired to another divice?

  • Applet cache is not working on Mountain Lion(Mac 10.8)

    Applet cache is not working on Mountain Lion(Mac 10.8)
    OS Details:  Mac 10.8
    Applet cache is not working on Safari 6 and Firefox 15.0.1 with java 7(provided by oracle) on Mac 10.8(mountain Lion) and even applets are not working  on chrome because its not supporting java 7(64 bit).
    In order to run applets on Firefox and Safari we need to install Java SE6 which provided by Apple otherwise “PlugInProcess” does not work and it show the below warning message.
    For your information I given screen shots below
    ) Safari screen shot with Java Plug-in
         2.) Firefox screen shot with Java Plug-in
         3) Chrome screen shot( it does not have java plugin)
    4) Java cache viewer console
    5) Applet Java console and it is using Java 7
    Kindly review above mentioned problem and suggest us.

    Problem solved.
    I switched to a Western Digital powered Hard Drive from the Toshiba Canvio I was using.
    I suspect the USB 3.0 did not mount correctly after the first save.
    Fortnuately the Canvio does work on my Windows 7 machine.
    Thanks for yur suggestions

  • CS4 "Save as Adobe PDF" not working in Mountain Lion

    CS4 Save as Adobe PDF not working in Mountain Lion
    Just bought a new Mac with mountain lion, installed CS4 design premium twice trying to fix this. When you go to "print" then "Save as Adobe PDF" the process fails with a pop-up saying "An error occurred while saving the PDF file". I can still do the standard "Save as PDF" - but that usually results in a file size 10x larger than Save as Adobe PDF so it won't work for me; I need the small file sizes of Save as Adobe PDF.
    When I go to Help > Repair Acrobat Installation it seems to be recognizing a repair needed with Adobe PDF Printer (see screenshot below); but when I go through the repair nothing changes it still won't work.
    Any help is much appreciated!

    "Save As Adobe PDF" works fine in Snow Leopard.
    Thanks for the link, but this is no help - I already have "Save As Adobe PDF" on the menu - the problem is when I click that it errors out...
    I just think its sad that Adobe charges people $2000 and provides zero support for future updates; when I buy an iMac for half that amount of money or an iPhone I get operating system support and bug fix downloads to deal with the latest internet advances for years to come - but Adobe apparently takes your money and says sayonara! Is it really that hard to provide updates on $2000 worth of software for say 24 months??

  • My scanner (Epson V300) does not work since mountain Lion upgrade.

    My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

    Try trick #5, at > Eight amazing Image Capture tricks | Macworld

  • HT1338 preview does not work with mountain lion

    I updated my mid 2011 mac mini to mountian lion and i find Preview and all of MS Office 2011 for MAC fails to work
    I can cut and paset the logs, but lets astart with assessing whagt does not work with Mountain Lion.

    Your profile lists a 2008 MacBook with Snow Leopard.
    I installed Windows XP into Bootcamp on my 2009 MacBook Pro (either in Leopard or Snow Leopard, I do not remember which) and I used it with Parallels 6.
    When I upgraded it to Lion, even though the Lion Bootcamp will NOT install Windows XP, my Bootcamp (and use by Parallels 7) survived the upgrade.
    It may be possible that it will also survive and operate a future upgrade to Mountain Lion. 

  • Appleworks does not work with mountain Lion.  What can I use for drawing and painting?

    Appleworks does not work with mountain Lion.  What can I use for drawing and painting?
    MacBook
    Marian

    Please see this article which examines various possible alternatives to AppleWorks:
    http://rfwilmut.net/aw

  • Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

    The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
    Opening the dictation system preference panel makes the system preferences crash...
    The mic of that camera is the only mic I have.
    I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
    Anyone having the same issue?
    I hope this is gonna be fixed with 10.8.1.

    Hello, thank you for responding.
    Unplug and plug in back the camera does not solve this problem. I tried that before.
    But what worked was to start photo booth. Don't really know why.
    So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

  • Apple remote no longer works with mountain lion

    The apple remote that was quite happily working with Lion no longer seems to be working with mountain lion.
    I've checked with at least 3 other apple remotes I have and none of them seem to want to pair.
    I've been able to pair them with another mac running Lion, but when going to the pair option under;
    Preferences--> Security& Privacy --> General --> Advanced -> Pair
    Pressing the menu and next for more than a minute gives me nothing on any of the remotes.
    Anyone else having issues pairing with mountain lion?
    *Note, each of the remotes quite happily will

    I thought I had a problem pairing my aluminium Apple remote with EyeTV, but all turned out fine.
    When I clicked Preferences --> Security & Privacy --> General --> Advanced --> Pair a message told to press the "Menu and Next" buttons until the remote paired with the computer. At first, I assumed this meant that I should press the two black buttons underneath the main, circular control, but nothing happened.
    Then it struck me that the "Next" button might mean the right arrow on the main, circular control, so I held down this while holding the Menu button (the smaller button, below and to the left of the main, circular control), and the remote paired within a few seconds!
    I don't have one of the older, white Apple remote controls to test this idea with, but something similar may also work with that remote.

  • Why does snaps pro not work with mountain lion?

    I spent a lot money purchasing the pro addition only to be told that it won't work with mountain lion due to Apple's written something into the code that does not permit me to make videos with it. I even tried ot make a video of Indesign acting up so i could send it to Adobe support and it wouldn't allow me to. Is this the resaon it suddenly doesn't work anymore? Are there plans to fix mountian lion to allow me to use my software? Alternatively,, does Apple have something that does screen captures of videos?

    this is the repsonse form Ambrosia: (Not sure I understand it)
    As far as Snapz Pro X 2 functionality, some major backend Digital Rights Management changes enacted by Apple may be what is preventing you from recording movies you were previously able to record using our software. Basically, our program can no longer access videos before the DRM protections are enabled, unfortunately we have no control over these changes. Please see the following FAQ:http://www.ambrosiasw.com/support/faqs/products/snapz-pro-x /Why-does-the-content-of-my-capture-display-as-a-checkerboard
    BTW I am current on the latgest version.
    Does anybody know how to work around my problem? I need to be able to record videos on my computer.

  • Logic Express not working on mountain lion!

    i am having problems with logic express 9.0.0 which is not running on mountain lion 10.8.2.
    i have made an attept to try and get newer updates but before it gets anywhere this pops up
         " An eligible Logic Express Version was not found in
         the Applications Folder. This Update requires Logic
         Express version 9.0 or higher. "
    (i do not have the logic disks at hand)
              The message that pops up when i attempt to open logic
                   " you cant use this version of the
                    application "logic express" with this
                   version of OS X.
              you have "logic express" 9.0.0 "
    please help!!

    Hi
    First, you are going to need v9.1.7 or later with Mountain Lion (http://support.apple.com/kb/HT5421)
    Second
    To get the updaters to work several things MUST be correct:
    The Logic Application must be named "Logic Pro" or "Logic Express" (depending on which type you are working with) with NO Additional spaces or numbers in the name.
    The application must be at the root level of the Applications folder (and NOT anywhere else).
    CCT

  • IMessage Not Working Since Mountain Lion Upgrade

    Since I "upgraded" my iMac and MacBook Air to Mountain Lion, iMessage delivery is hit and miss to the say the least from my iPhone 4S.  I first realised there was an issue receiving text messages whilst in the States and not connected to WiFi. Messages weren't even being received as text messages, even but would all come through as a flood from my girlfriend when I connected to WiFi.
    At the weekend she dropped her iPhone 4 and the screen is duff so she's swapped her SIM into a spare BlackBerry until it's repaired.  Gues what? She can text me but my 4S is still trying to reply by iMessage and none of them are being resent/sent as text messages.
    It's useless having a mobile phone that will effectively only communicate by voice and e-mail and no basic texting. It wouldn't be so bad if it actualy said the messages were failing.

    Were you running os x 10.6 before the upgrade?
    Anyway photoshop cs2 won't work on mountain lion because cs2 is a PowerPC application
    and mountain lion can only run intel applications natively like photoshop cs3-cc.
    If you were using 10.6, then you were using rossetta, an application that allowed some powerpc programs to run on an intel mac and mountain lion doesn't have rossetta.
    The current versions of photoshop available from adobe are photoshop cs6 and photoshop cc, but since cs2 is out
    of the upgrade loop now, so you need to either buy the full version of photoshop cs6 or subscribe to photoshop cc.

  • Photoshop not working since Mountain Lion upgrade

    I have recently upgraded my Mac to Mountain Lion and now my Photoshop wont work. What do I need to do to get it to work (upgrade etc)? I'm not a techie as you can probably tell!

    Were you running os x 10.6 before the upgrade?
    Anyway photoshop cs2 won't work on mountain lion because cs2 is a PowerPC application
    and mountain lion can only run intel applications natively like photoshop cs3-cc.
    If you were using 10.6, then you were using rossetta, an application that allowed some powerpc programs to run on an intel mac and mountain lion doesn't have rossetta.
    The current versions of photoshop available from adobe are photoshop cs6 and photoshop cc, but since cs2 is out
    of the upgrade loop now, so you need to either buy the full version of photoshop cs6 or subscribe to photoshop cc.

Maybe you are looking for

  • ORA-04043 Error when oracle type is declared in a package

    We have a package defining a type and a procedure which uses that type. The problem is - If the type is defined in a package jdbc fails with an error. If the type is declared outside the package everything works fine. The package is declared as creat

  • Table for payment run

    Hi Can any one tell me in which table  i can have the details like vendor number and vendor name and bank account number will be stored after the execution of payment run,i am looking for the solution for the particular payment run only.with that i c

  • FMW rpm dependency

    The Oracle® Fusion Middleware System Requirements and Specifications for Oracle Identity and Access Management 11g Release 2 (11.1.2.1) documentation lists a set of Linux packages, included at the end of this post, as dependencies in installing Fusio

  • Appletviewer and browser diff

    I used getParameter("somename") to obtain the value of some parameter from the html file, this value has some line separators. I use StringTokenizer with "/n/r" to parse the value. When I run the html file on appletviewer, the value was parsed correc

  • How to uninstall remove Octoshape in my computer

    I cannot find out the method to remove Octoshape from my Mac Book Air.  It will appear when I login my computer everytime.