Remote Desktop - Pinch and Zoom compatibility with Microsoft Access

Hi guys, not sure which forum to place this into but here we go.
We use Windows 8.1 tablets and RDP to a 2012 R2 Remote Desktop Server, we can pinch and zoom with Office 2007 Excel, Word without issues.
I would like to know if there is a list of programs that's compatible with pinch and zoom because it looks to me like Microsoft Access (2007 version) isn't compatible with pinch and zoom but I need proof for my IT manager.
Can you tell me if I should be able to pinch and zoom a database windows within MS Access?

Hi,
As per my research there is no such description whether which program compatible with pinch and zoom but still as this seems more relate to tablet question. You can ask your comment over there for more perfect answering.
https://social.technet.microsoft.com/Forums/en-US/home?category=surface
http://answers.microsoft.com/en-us/surface/forum?auth=1
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Enabling Safari Pinch and Zoom in Magic Mouse

I really like the safari pinch and zoom feature with magic trackpad. It is very useful especially with my 27" iMac. However, I find this featured disabled with my magic mouse. Is there any way to enable the pinch and zoom feature in magic mouse?

Try this from what I have read it is more advanced and polished than BetterTouchTool. Works well for me.
http://magicprefs.com/

Pinch and zoom with Content Viewer

Question regarding the Content Viewer -- I noticed the pinch and zoom does not appear to work with DPS files viewed in the content viewer. Once the files are built for final and submitted, will there be pinch and zoom available or does DPS prevent that from being available on the iPad? Thanks.

Pinch and zoom only works with pages created with PDF graphic format and with no interactivity.
Bob

Report Generation Toolkit Compatibility with Microsoft Office 2013 and LabVIEW 2012

Hello community,
on this page there is shown the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW.
In our company we use actually LabView 2012 and it works perfectly with MS Office 2010.
Has anyone ever tried the "Report Generation Toolkit" of LabVIEW 2012 with MS Office 2013? Does it really not work? Has anyone an emirical value for this topic?

Hi digital_badger,
as you sure have seen in the link it is not officially supported by NI, which means to you one of the following things:
1. You could upgrade your LabVIEW and your Report Gerneration Toolkit to Version 2014 and use MS Office 2013
2. You could just try it with MS Office 2013 which might work but if it's not working you don't get any support from NI.
Even if someone tried it already and it worked for him does not mean that it will work on your machines. It is possible that on some of your machines it could work but not on others. Their can be a lot of problems while playing around with unsupported setups.
3. You could leave your setup as it is and stick to your MS Office 2010.
I hope I could give you a good answer to your question

Pinch and zoom frame - incompatible with PDF article type?

Hi there,
If I want to have pinch and zoom within a frame (i.e. not whole page), will this not work when the article type is PDF? I've only managed to get this working for a JPG article so far.
Thanks,
Toby

I'm finding pinch and zoom tricky to implement, in general. The only way I have got it to work so far is by creating a new document, then doing as described here:
http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fe.html
I then added the article to my folio using the JPG type. However, this only worked the first time I updated the viewer, and then stopped working on all subsequent updates. It's still just a placed image, there's nothing else on the page.
I've also tried adding pinch and zoom functionality to an existing article (PDF type) and couldn't get this to work at all, however I was adding it to a multi-state object, which may have been complicating matters.
Toby

IOS Remote Desktop app and computers connected to SBS 2008--can't get it to work

I can connect directly to the server without a remote resource in the IOS app.
But I'd like to be able to connect to computers in the office like we can through RWW. RWW works fine, but not from my phone. (Yes I can connect to the server and take over computers from the phone but I don't want other people in the office to log
into the server first!).
I can never get the remote resources section in the app to connect. I usually get "Unable to locate any remote resources for the URL". error in the resources section. I've tried a simple "https://remote.domain.com", "https://remote.domain.com:987",
etc.
We have a self-signed certificate. I can't think of anything in the server setup that is anything other than normal.
I can do direct connect using "Remote Desktop Connection" in windows 7. In the remote desktop server settings I just put remote.domain.com and "Ask for password (NTLM)" for the login method. Then on the general tab I have just the
simple computer name and the domain\username. That's all I had to setup to get that to work.
Any suggestions?

Hi Michael,
Thank you for posting in Windows Server Forum.
Have you setup RD Gateway server in your environment? Are you trying to access the RWW through it?
On server side you can choose “Bypass RD Gateway server for local addresses” under RemoteApp manager and check the result.
For more information, you can check below links for detail.
Remote Desktop Client on iOS: FAQ
http://technet.microsoft.com/en-us/library/dn473015.aspx
Getting Started with Remote Desktop Client on iOS
http://technet.microsoft.com/en-us/library/dn473013.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Lion vs snow leopard "pinch and zoom" issues?

Since changing to Lion from snow leapord, I can no longer "pinch and zoom" ? the only time it seem to work is with a safari page? The desktop wont zoom any more ?

You never could zoom the desktop in SL with finger gestures alone. You could zoom it by holding down the control key and using a two-finger upward swipe. Is that what you mean?
If so, you can still do this in Lion. You need to go to
 > System Preferences... > Accessibility
click 'Zoom' in the sidebar list, and check 'Use scroll gesture with modifier keys to zoom'

Remote Desktop Gateway and WebAccess Deployment - Multiple Logon Prompts

I'm having a few issues with some multiple logon prompts using "Connect to a remote PC" via RD Web Access.
I am able to log onto the RDWeb without a problem.
Essentially once I make a connection to my end-device I first receive a logon prompt, I'm authenticated, then I'm asked again for another logon prompt. Any ideas how to resolve this?
My layout is simple:
1 VM in the DMZ that has the Remote Desktop Gateway and Remote Desktop Web Access roles installed. No connection broker, or session host.
With my deployment I have a wildcard certificate bound to the Remote Desktop Gateway and it is bound properly in IIS. Remote Desktop functionality through the RDGateway works just fine. However, the only nuisance is that I get prompted multiple times for
credentials when accessing the end-device regardless if my connection is from a domain-joined machine or a non-domain joined machine.
I've tried using Web Single Sign On via http://anandthearchitect.com/2014/01/20/rds-2012-r2single-sign-on-using-windows-authentication-for-rdweb-page/ and it still does not work.
Any ideas?
Thanks,
Dan

Hi Dan,
How many prompts are you seeing? Expected behavior for Connect to a remote PC would be this:
1. Log on to RDWeb
2. Select Connect to a remote PC tab
3. Enter server name in Connect to box, click Connect
4. Unknown publisher warning, click Connect
5. Credentials prompt, it should say These credentials will be used to connect to the following computers: 1. rdgw.domain.com (RD Gateway server) 2. remote.domain.com (remote computer)
6. After entering credentials and clicking OK it should log you in to the remote computer. This assumes that the destination is authenticated properly (usually via certificate) and the credentials are valid for both the RDG and the remote
computer. Normally in a domain environment the same credentials (domain\username) would be valid for the RDG and the remote server.
-TP

Yosemite compatibility with microsoft word 2008

I had held off on upgrading to Mavericks because of the issues surrounding the compatibility with Microsoft Word 2008. I am a student and need to use Word to do my work as well as having all of my current documents, including my thesis, in 2008 format. I don't want to risk losing the information or the ability to do my work and I was wondering if there is any information about whether the issue of compatibility with this version had been fixed. I don't have the means to buy a new version of Microsoft but would very much like to be able to update my system since I am still using Mountain Lion.

There has been a better and free alternative to old versions of MS Word and MS Office since forever. Apache OpenOffice 4.1.1 is the latest version of a free and complete All-In-One document processor, spreadsheet, drawing, presentation, database, & formula software, found here: http://www.openoffice.org
It also reads, writes and translates MS Word, saves in many formats, and is pretty easy to use. It's entirely modern and compatible with all the latest Mac operating systems. Good luck.

Bug in PDF pinch and zoom?

Hi, I have a big problem related the PDF pinch and zoom.
When I try to make an article with 2 vertical pages each containing one imported PDF and 1 horizontal page contain two imported PDF, the result is a simple jpeg page with no pinch and zoom.
The strange thing is that if in the same article I add more vertical and horizontal pages, the pinch and zoom works!
I use the latest version of Folio builder and Folio Producer and, off course, I follow the normal steps: I choose PDF when I create an article, I use iPad and not Android and the PDF zooming is enabled in Viewer Builder.
I need to have 2 vertical pages and 1 horizontal to adapt an a paper magazine (I know the DPS has not been made for this but my publisher want to publish all our magazine with this platform, we also have a magazine specifically designed for the DPS ). My "idea" is create a stack every two pages to allow rotation between pages remaining on the same pages and enable the horizontaly flow between "articles" but if the pdf are transformed in jpeg I can't proceed...
It's a bug or I missed some step?
Thanks in advance for your answers
Claudio (from Italy, sorry for my english!)

I think there might be a bug here.
I've successfully created a pinch zoom folio using the sidecar.zip files posted by Klaasjan.
However if I import my own article (_h and _v both set to iPad dimensions and containing a simple text field of text).
If the article format is set to PDF, once created and I view the Properties panel, the Smooth Scrolling option is set to Horizintal only and greyed out so it cannot be changed. So no pinch/zoom is available.
If the article format is set to Automatic, once created and I view the Properties panel, I can set the Smooth Scrolling property to Off (Snap to page) and tick the Horizintal Swipe Only checkbox (so I'm matching the setting of the sidecar examples).
However, when I the Update the article to the Folio Producer and then check the article Properties again, the Smooth Scrolling has reverted to Horizontal Only. So again, no pinch zoom.

DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

Lost pinch and zoom!

is there a problem when adding multiple stacks/articles in that when you select multiple you lose what type of file it should be ie PDF etc.
reason I ask, is that pinch and zoom doesnt work using this work flow.
I went back and created the single issue folio with content builder and that folio works
yet more frustrations.....
thanks for any help
Cheers
Alistair

Hi Bob, no.
I have 20 stacks/articles, most of which are static, so in Content builder I saved the folio as single issue, and in the drop down selected PDF as file type
then using the latest content builder created an ipa, put on the ipad and pinch and zoom works as expected.
Doing the same with the current and latest tools, and loading the stacks as multiple files, (with no way to select what type of file, pdf, jpg etc)
saving out to an ipa, I lose pinch and zoom.
just about to try adding the stacks one at a time, all 20 of them, deep joy!

EPub format and pinch-and-zoom

Hello all,
I'm curious if someone can tell me whether the pinch-and-zoom capability seen on the IPad is a function of the hardware, or is it something that needs to be dealt with in advance in the ePub document?
I wouldn't mind having images that a reader could zoom in on and that would be nice and sharp at some high-level zoom, but don't know if, or how, I can ensure that my book images will be sharp throughout. Any ideas or info will be appreciated.
-T

I think it's hardware function. Email yourself a PDF or newsletter and go to an apple store and check your mail.

Pinch and zoom inside scrollPane

How do I do zoom in the area where the Gesture is being done inside a scrollPane? Right now it just zooms in where the registration point is.
Thanks,

1.       The use of PDF graphic format with no interactivity will allow for pinch and zoom.
2.       The beta program ended months ago.
3.       The new folio builder is a panel found inside InDesign
You can download the appropriate tools by going to Adobe.com and clicking the download link. Browse to the folio builder tools.
Bob

Pinch and Zoom

Trying to enable pinch and zoom for an entire folio page. Have looked extensively around the forums and it has resulted in a few questions.
1. Any way to enable full page zoom in a folio page?
2. Will the Adobe Content Bundler be available outside of beta?
3. How do you bundle pages as PDFs without using the Adobe Content Bundler?
Thanks in advance.

1.       The use of PDF graphic format with no interactivity will allow for pinch and zoom.
2.       The beta program ended months ago.
3.       The new folio builder is a panel found inside InDesign
You can download the appropriate tools by going to Adobe.com and clicking the download link. Browse to the folio builder tools.
Bob

Remote Desktop - Pinch and Zoom compatibility with Microsoft Access

Similar Messages

Maybe you are looking for