Remote iPad/iPhone control

Hi,
Need a little help. 
Have just bought Beosound 8, which Can dock iPod, iPad and iphones.
However, I cannot control the units Remote by Apple Remote app. It is the iPad/iPhone which Can control iTunes Remote on my MacBook.
How do I Remote control the iPad/iPhone from my MacBook so When I am using my beosound 8, I Can create playlists and etc etc ???

You don't.
Remote app is only for controlling playback on a Mac.
There are no apps to remote control iOS devices.

Similar Messages

  • AiO Remote app on iPad/iPhone does not find M1217nfw

    Hi,
    I have a M1217nfw setup on my WiFi network.  I can use Airprint from my iPad or iPhone to print on it - works fine.  However I want to use the AiO Remote app on my iPad or iPhone to scan documents from this printer to my iPad/iPhone.
    The problem is that when I try to use the app it tells me that it cannot find any printer!  I upgraded the firmware on the printer - still no go.
    I even tried to connect it using the HP Wireless Direct options - still no go.
    Treid to connect using the printer's IP address - still no go.
    According to the document http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03843137&sp4ts.oid=2... - the M1217nfw is supported by the AiO Remote app.
    Any help or clues would be greatly appreciated!
    thanks,
    vijar

    Hi @vijar,
    Welcome to the HP Support Forums.  I see that you would like to learn more about HP’s All-in-One Printer Remote app.
    I have included the HP All-in-One Printer Remote Mobile App FAQs document. It has a section dedicated to the printers that support this app and the Laserjet 1217nfw printer is not supported by the app.   I have notified the appropriate department regarding the document.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Can I use Remote app on iPad to control RENTED (read Rented) movies on Apple TV?

    I use the Remote App on my iPad to control movies on my Apple TV, but those are movies that I own and are resident on my home network.
    What about controlling a rented movie that is aquired through iTunes Store? I would like to be able to control rented content just the same.
    Please advise?
    I have the older version of Apple TV – maybe controlling rented movies with ipad can be done with newere Apple TV and iOS 5 on all devices?

    Ok, thanks, now I see the very inconspicuous little "control pad" icon in bottom right corner of Remote App. How the **** is a guy supposed know what that means? Why not just put a button labled with "Control Pad" or something on it?
    Thanks just the same. Now that I know that, it works really slick. I can start/stop/pause rented movies and use my iPad as remote touch pad to navigate anywhere on the Apple TV menu. Nice.
    Can't wait for the "real" Apple TV set to come out.

  • HT1947 I see 2 apple tvs on my ipad, iphone, and within the remote app. How do I get rid of the "old" one?

    I changed the AirPlay password on my apple tv, and now I see 2 apple tvs on my ipad, iphone, and within the remote app. How do I get rid of the "old" one?

    Can be closed. Problem disapeared on its own!

  • I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?

    I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?

    Welcome to the Apple Community.
    If home sharing isn't enabled on the Apple TV, you will need the aluminium remote that came with it to do so.

  • HT201335 I can't see airplay on my iPhone and iPad in control center

    I'm not seeing the airplay icon on my iphone and ipad in control center

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • HT4325 Can anyone please tell me if there is an app that allows me to control multiple speakers on my iPad, iPhone or IPod?

    Can anyone please tell me if there is an app that allows me to control multiple speakers, via multiple airport express, on my iPad, iPhone or IPod? Thanks!

    You can use the camera connection kit to connect, but there's no protocol for any sort of data or file transfer beyond properly named photos and videos. You can plug them in but they won't do anything.
    The only printing the iPad  natively supports is air print to specific printers, or printing to wifi printers with third party apps. You cannot use flash drives for data transfer (beyond the mentioned photos and videos)

  • Como realizo el enlace entre el Keynote remote del iphone y el keynote del ipad

    Como realizo el enlace entre el Keynote remote del iphone y el keynote del ipad

    La mejor solución es usar el Ads OCX, podrás leer directamente de la area de memoria del PLC sin necesidad de usar un OPC.
    Si las variables del PLC las construyes de tipo estructura el refresco, es inmediato.
    No te hará falta el DSC

  • Mac Mini used as Apple TV (airplay and apple remote on iphone/ipod)

    Yesterday Apple announced the new Apple TV as an iOS device. It can be controlled using the apple remote app on an iphone or ipod touch. I am using a Mac Mini using Air Mouse to control the Mini which is hooked up to my TV. Would it be possible to use the Apple Remote app for this?

    Hi Bart,
    you could use the itunes remote app to control your itunes music / videos from an iphone/ipod touch/ipad.
    http://www.apple.com/itunes/remote/
    Keep in mind the itunes currently uses the remote app in a different manor to the apple tv. I don't think you could use the itunes remote app to for instance rent movies. But ones you had the movie rented you could use the remote app to trigger playing /pausing the movie. But there are some advantages, like you can get a list of videos on the computer on the iOS device.

  • IPad, iPhones, iPods, activboards-what can I do with all these in my classroom?

    I am a language arts teacher in an 8th grade classroom. I have a classroom ipad, an HP laptop/dock, promethean activboard & more than half of my students have their own iPads/iPods/iPhones. I personally have an iPhone & a MacBook Pro (& an Apple TV, but would not want to bring that from home to school-if it meant the diff between being able to take technology to the next level, i might consider buying an Apple TV for my classroom).
    Is there a way to have the students using their devices to respond to questions/games on the board? And can I use the ipad to control the board?
    The little I researched so far seemed to reference using Apple TV hooked up to board with devices passing thru it as "remotes"? Is this something?
    Thoughts, feedback?
    TIA !!!

    Lightroom/PV2012 does an awesome job on jpegs too. It doesn't have all the same data to work with as raws, so can't real the highlights in as well etc. but can buff 'em up pretty good... - try it!
    I could give a more complete and detailed list of differences (e.g. camera profile & white balance), but you'll be discovering them shortly anyway .
    In general: there are a few less options and you can't push 'em as hard - edits may need to be more "restrained" (conservatively applied).
    ~R.

  • TS2972 How do I stream music from shared library to my iPad/iPhone?

    I have home sharing activated on PC and iPhone and iPad. Music stored on PC shows up on iPad/iPhone when I select my shared library. When I select a song on my iPad/iPhone to play it is played on the PC (i.e., through the PC speakers) and not through the iPad/iPhone speakers - like the iPad/iPhone only acts like a remote control device for the PC iTunes Player instead of streaming the song to my iPad/iPhone. Any suggestions?

    What are you using to play them? If you are using the Remote App, then yes that is the expected behavior.
    You must go into the Music or videos App, and find the Shared Library. It will then play in the iPad or iPhone.

  • Cannot play slideshow using Keynote Remote on iPhone

    I have purchased Keynote Remote and installed on iPhone 3GS (v3.1.2), the app connects to MacBook Pro no problem, however I cannot 'Play Slideshow' - Just get the screen 'Could not play slideshow. Make sure a slideshow is playing on your computer.' But still doesn't run, even when I have KeyNote running on MacBook and a SlideShow open as required.
    Have tried rebooting both devices, I have also removed the App from the iPhone, deleted it from MacBook and then downloaded and installed it again...
    Any ideas please...

    Hello Patchworkm,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Using Keynote Remote
    http://support.apple.com/kb/HT3325
    Using Keynote Remote with Bluetooth
    When a Wi-Fi connection is unavailable you can use Keynote Remote with Bluetooth to control your Keynote slideshow from one iOS device to another (iPad, iPhone, iPod touch). However, slides may take longer to appear on Keynote Remote when connected via Bluetooth. You cannot use Keynote Remote via Bluetooth with a Mac.
    The following steps use Keynote Remote on an iPhone to control a Keynote presentation on an iPad via Bluetooth.
    iPhone: Go to Settings > General > Bluetooth and turn Bluetooth ON.
    iPad: Go to Settings > General > Bluetooth and turn Bluetooth ON.
    iPad: Open a Keynote presentation.
    iPhone: Open the Keynote Remote app. If you have previously paired your iPhone or iPad, you can immediately begin to control your slideshow from your iPhone by tapping Play Slideshow. If this is the first time pairing with these iOS devices, refer to the steps in "Linking Keynote Remote to Another iOS Device," above.
    Note: If your iPhone displays the message "No connection available. Both devices must be connected to a Wi-Fi network or have Bluetooth turned on," continue with the steps above because you may still be able to use Keynote Remote with Bluetooth.
    Best of luck,
    Mario

  • Best program for monitoring and blocking internet use on my kids mobile devices, iPads, iPhones from my MAC

    Whats the best program for monitoring and blocking internet sites and usage for my kids on their mobile devices ipads, iphones and ipods, all from my desktop mac?

    Can't be done from your Mac remotely.
    But you can enable parental controls directly on iOS devices.
    iOS: Understanding Restrictions (parental controls)

  • Logic Remote iPad app not working

    I've have Logic Pro X installed on Mountain Lion and the latest IOS on an iPad (3rd gen) running Logic Remote but can't get them to work together.
    After I choose the Mac pop up boxes keep appearing with either an option to re-connect to Mac or the attached error. (In the backround I can see the clock ticking that's synced with the Logic project playing on the Mac?
    I've never had any problems with my wi fi and all the other apps work fine (including other controller apps that communicate with Logic Pro 9?)
    I've tried removed the iPad from the Control Surface Setup page in Logic Pro X and selecting it again from the iPad app (which re-adds it correctly into the Setup in Logic Pro X)
    Any ideas?
    Thanks,
    A.

    Amazingly this worked, thanks. I'd already removed and let it add automatically a few times and it didn't work properly even after authorizing it.
    I removed it from the setup and then added it back in manually myself (New, Install, Apple Logic Remote).
    Then I ran the iPad app, and I ended up with 2 Logic remotes in the Control Surfaces Setup. The iPad logic remote wasn't coming up with any errors but all the faders were on 0 when they weren't on the Logic Pro X on the mac.
    I then deleted the first Logic Remote in the Control Surfaces Setup and it seems to work. Thanks!

  • HT5570 My six-year old grandson appears to be able to make purchases on the TV without having to enter the password and yet every other device i use (e.g. iPad, iPhone, iPod) is password protected. How is that possible?

    My six-year old grandson appears to be able to make purchases on the TV without having to enter the password and yet every other device i use (e.g. iPad, iPhone, iPod) is password protected. How is that possible when I have to use my password to access such services on all other devices?

    DominicDeBurca wrote:
    My six-year old grandson appears to be able to make purchases on the TV without having to enter the password and yet every other device i use (e.g. iPad, iPhone, iPod) is password protected. How is that possible when I have to use my password to access such services on all other devices?
    Having AppleTV remember the password is optional.
    Logout of iTunes store, log back in and hopefully next time you come to purchase you'll be prompted for your password but decline the option to remember it.  You might also want to look out of parental controls on the unit.
    AC

Maybe you are looking for

  • How to easily merge 2 iphoto libraries (with duplicates)

    Hello, I would like advice on an easy way to merge my iphoto library with my husbands. I am concerned for the following reasons. We have many pictures and events that are on both computers, but also have many pictures that just reside on one computer

  • External hard disk does not show in finder

    WD usb external hard disk does not appear in finder.  Disk utility sees it and will mount/unmount and eject.  I ran repair disk util. and all is well but still does not appear in finder 

  • How to disable a module for awhile when MOD_AUTOLOAD="yes"?

    Hello, By default, my system loads the ndiswrapper module on boot, and has my native wifi driver blacklisted. This is because the ndiswrapper driver works much more reliably for everyday use. However, I sometimes need a feature that the native rt2500

  • Trouble with Adobe Camera Raw

    I have started to use ACR (Adobe Camera Raw) for making changes to my photos before opening them up properly in Photoshop, and I have 2 quick questions: 1. The Photoshop guide I'm reading says that in the White Balance section of the 'Basic' tab (on

  • A panel that won't display

    I've created a class "highscores" which reads data from XML, i've used it before so this should work... i put all the data into a list and i want to display it in a panel which containts a label. but somehow the panel isn't visible, i tried a lot of