Remotley connect to mySql via mm.mysql

Hello,
I'm running WIN2k, JDK 1.2.1_004 and I'm trying to make a local java application to connect to mysql on my web server via mm.mysql. But it doesn't work
I get the following error:
SQLState: 08001
Message: No suitable driver
Vendor: 0
I've tried to connect via the ip:
Connection con = DriverManager.getConnection ("jdbc:mysql://64.176.118.240:3306/grattiskort_com?user=grattis&password=");
And domain name
Connection con = DriverManager.getConnection ("jdbc:mysql://grattiskort.com:3306/grattiskort_com?user=grattis&password=");
I have enabled remote connection in mysql config.
Do I need to install the driver on my web server too, and if so, how do I do that?
Does anyone have a clue what's wrong?
Regards,
Chrille

Message: No suitable driverWhere do you load the driver?

Similar Messages

How to connect APEX with MYSQL via Apex's Database link

How do i connect APEX with MYSQL via Apex's Database link? The OBE doesn't go into specific detail about how to link the two.
can someone please elaborate on what these are and where i can find them in mysql:
Database Link Name
Connect To Schema
Password
Remote Hostname or IP
Remote Host Port
SID or Service Name
I need to link to mysql database so I can set up a 3D pie chart in apex

Hi jononioo
A database link is a device for connecting between Oracle database instances only. Oracle does have a method for connecting to other database systems (Transparent Gateway) but this is restricted to other commercial databases and I don't believe there is a gateway for Mysql. (I could be wrong)
I don't know Mysql but maybe there is some way to push data to the Oracle instance. Other than that, is there any reason why the data has to reside in the Mysql database?
Regards
Andre

Connection to mySQL via jdbc

I'm currently programming a GUI to access a database. Therefore I executed a query, which worked fine. But when I tried to exit my program with
System.exit(0)my DOS-Prompt crashes without exiting.
Now I tried it with a kind of minimalistic Connection like that:
Class.forName("org.gjt.mm.mysql.Driver");
Connection conn = DriverManager.getConnection("jdbc:mysql://localhost/stock");
conn.close();Here the same problem occurs, so it must be the Connection that causes the error.
If I would exit the program right away after the Connection, that is
Class.forName("org.gjt.mm.mysql.Driver");
Connection conn = DriverManager.getConnection("jdbc:mysql://localhost/stock");
conn.close();
System.exit(0);then the program exits properly. Unfortunately it doesn't make any sense to quit the program right after reading the data.
So, as you can guess, I'm quite confused. I used the same driver and the same database in another program on the same computer, and it works fine. So I'm left totally clueless.
I'm not using a special programming environment, I just write my code using UltraEdit. I've got installed Java 1.4.0 on my machine.
Any help is very appreciated
Martin

I don't get any.
It just crashes. There's neither an exception thrown nor any other error msg.

Connecting to MySQL via DW after Leopard install

I cannot connect to MySQL 5.041 through DW CS3 after
upgrading to Leopard. MySQL Admin and MySQL Query Browser both can
connect and make queries to the database. I just can't connect
through Dreamweaver. I get the "MySQL Error#: 2002" error which
states "Can't connect to local MySQL server through socket
'/var/mysql/mysql.sock' (2). Problem is there is no such
path.

There may be an updated needed for dreamweaver, however, I
did find some info about MySQL running on Leopard:
http://bugs.mysql.com/bug.php?id=32019
and some workarounds that I have not tested as being valid:
http://angry-fly.com/index.cfm/2007/10/26/Fix-for-MySQL-on-Leopard

Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard

Cannot connect from dreamweaver cs5.5 to mysql using the mysql connection wizard error Http error 403 or 500 internal server error. I am using ubuntu mysql.
a manual php script work fine
<?php
// open connection to mysql server
$dbc = mysql_connect('localhost','root','password');
if (!$dbc) {
die('Not Connected' . mysql_error ());
//select database
$db_selected = mysql_select_db ("msinventory",$dbc);
if (!$db_selected)
die('Cannot Connect' . mysql_error());
echo "TEST DONE1";
?>
but the database connection wizard fails with http error 403 or 500
i also use the HeidiSQL client and it works, the only problem is in dreamweaver.

OK. Did you really mean to ask this question on a ColdFusion forum, if it's DreamWeaver you're having problems with? You're probably better off raising this on a DreamWeaver forum. "Using the correct tool for the job" 'n'all.
Adam

Problem connecting a webservice to a mysql database

Hi,
I am trying to connect a webservice to a mysql database. I am using sun application server 8.1 and Mysql 4.1.
I have been using the application servers examples to achieve my goals thus far. I have made the following progress.
- I have got a simple jdbc web application on the application server to access my mysql database.
- I have got a web service on the application server to work properly, in regards to performing a simple rpc method such as 'sayHello'.
- I now want my webservice to have similar functionality to the jdbc application. A simple query or update to the database installed on the application server invoked from the webservice deployed on the application server.
I have been having difficulty in achieveing this. I don't understand why I can't get this to work as i can achieve access to the database from the jdbc app. I am getting the following errors on the application server log:
[#|2005-03-01T14:22:59.739+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
retrieving_initial_context...|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
retrieved_initial_context_successfully|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
recording_the_greeting...|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_datasource...|#]
[#|2005-03-01T14:22:59.799+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_datasource_successfully|#]
[#|2005-03-01T14:22:59.799+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_connection...|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_connection_successfully|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_statement...|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_statement_successfully|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
executing_query...|#]
[#|2005-03-01T14:22:59.900+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
could_not_interact_with_db|#]
[#|2005-03-01T14:22:59.910+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
excpetion: com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
** BEGIN NESTED EXCEPTION **
java.io.IOException
MESSAGE: An established connection was aborted by the software in your host machine
STACKTRACE:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.read0(Native Method)
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:25)
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:233)
at sun.nio.ch.IOUtil.read(IOUtil.java:206)
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:207)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:75)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:66)
at com.mysql.jdbc.util.ReadAheadInputStream.fill(ReadAheadInputStream.java:75)
at com.mysql.jdbc.util.ReadAheadInputStream.readFromUnderlyingStreamIfNecessary(Re adAheadInputStream.java:94)
at com.mysql.jdbc.util.ReadAheadInputStream.read(ReadAheadInputStream.java:122)
at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:1842)
at com.mysql.jdbc.MysqlIO.reuseAndReadPacket(MysqlIO.java:2292)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2788)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1534)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1625)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2291)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2226)
at com.mysql.jdbc.Statement.executeQuery(Statement.java:1159)
at goodbyeservice.GoodbyeImpl.sayGoodbye(Unknown Source)
at goodbyeservice.GoodbyeIF_Tie.invoke_sayGoodbye(GoodbyeIF_Tie.java:54)
at goodbyeservice.GoodbyeIF_Tie.processingHook(GoodbyeIF_Tie.java:124)
at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:321)
at com.sun.xml.rpc.server.http.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate. java:443)
at com.sun.enterprise.webservice.JAXRPCServlet.doPost(JAXRPCServlet.java:50)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFil terChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterCha in.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.ja va:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain .java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java: 263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextVal ve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java: 173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:13 2)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:184)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.ja va:653)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.ja va:534)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doTask(ProcessorTask.jav a:403)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:55)
** END NESTED EXCEPTION **
I can't think of what the problem may be other then the following issues:
- the mysql database would allow access from the jdbc application as it is seen as a local process whereas it may not for the webservice as it is seen as a remote process???
- I may need to utilize a different datasource class to give the webservice access rights?
Any help or advice in how this problem might be resolved or even just what it is would help me greatly. Thanks for you time in advance.
Alvee

Hi,
I am trying to connect a webservice to a mysql database. I am using sun application server 8.1 and Mysql 4.1.
I have been using the application servers examples to achieve my goals thus far. I have made the following progress.
- I have got a simple jdbc web application on the application server to access my mysql database.
- I have got a web service on the application server to work properly, in regards to performing a simple rpc method such as 'sayHello'.
- I now want my webservice to have similar functionality to the jdbc application. A simple query or update to the database installed on the application server invoked from the webservice deployed on the application server.
I have been having difficulty in achieveing this. I don't understand why I can't get this to work as i can achieve access to the database from the jdbc app. I am getting the following errors on the application server log:
[#|2005-03-01T14:22:59.739+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
retrieving_initial_context...|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
retrieved_initial_context_successfully|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
recording_the_greeting...|#]
[#|2005-03-01T14:22:59.789+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_datasource...|#]
[#|2005-03-01T14:22:59.799+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_datasource_successfully|#]
[#|2005-03-01T14:22:59.799+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_connection...|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_connection_successfully|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
getting_statement...|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
got_statement_successfully|#]
[#|2005-03-01T14:22:59.819+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
executing_query...|#]
[#|2005-03-01T14:22:59.900+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
could_not_interact_with_db|#]
[#|2005-03-01T14:22:59.910+0000|INFO|sun-appserver-pe8.1|javax.enterprise.syste m.stream.out|_ThreadID=16;|
excpetion: com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
** BEGIN NESTED EXCEPTION **
java.io.IOException
MESSAGE: An established connection was aborted by the software in your host machine
STACKTRACE:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.read0(Native Method)
at sun.nio.ch.SocketDispatcher.read(SocketDispatcher.java:25)
at sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:233)
at sun.nio.ch.IOUtil.read(IOUtil.java:206)
at sun.nio.ch.SocketChannelImpl.read(SocketChannelImpl.java:207)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:75)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:66)
at com.mysql.jdbc.util.ReadAheadInputStream.fill(ReadAheadInputStream.java:75)
at com.mysql.jdbc.util.ReadAheadInputStream.readFromUnderlyingStreamIfNecessary(Re adAheadInputStream.java:94)
at com.mysql.jdbc.util.ReadAheadInputStream.read(ReadAheadInputStream.java:122)
at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:1842)
at com.mysql.jdbc.MysqlIO.reuseAndReadPacket(MysqlIO.java:2292)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2788)
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1534)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1625)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2291)
at com.mysql.jdbc.Connection.execSQL(Connection.java:2226)
at com.mysql.jdbc.Statement.executeQuery(Statement.java:1159)
at goodbyeservice.GoodbyeImpl.sayGoodbye(Unknown Source)
at goodbyeservice.GoodbyeIF_Tie.invoke_sayGoodbye(GoodbyeIF_Tie.java:54)
at goodbyeservice.GoodbyeIF_Tie.processingHook(GoodbyeIF_Tie.java:124)
at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:321)
at com.sun.xml.rpc.server.http.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate. java:443)
at com.sun.enterprise.webservice.JAXRPCServlet.doPost(JAXRPCServlet.java:50)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.ja va:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFil terChain.java:257)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterCha in.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.ja va:161)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain .java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java: 263)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextVal ve.java:225)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java: 173)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:13 2)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:184)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.ja va:653)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.ja va:534)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doTask(ProcessorTask.jav a:403)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:55)
** END NESTED EXCEPTION **
I can't think of what the problem may be other then the following issues:
- the mysql database would allow access from the jdbc application as it is seen as a local process whereas it may not for the webservice as it is seen as a remote process???
- I may need to utilize a different datasource class to give the webservice access rights?
Any help or advice in how this problem might be resolved or even just what it is would help me greatly. Thanks for you time in advance.
Alvee

Adobe Air + MySQL via amfphp

Hi friends,
I'm new to the Air and I'm currently trying to create a app that must to communicate with mysql via amfphp. I found some good tutorials for Flex with amfphp in google but none for Air with amfphp.
Someone has a good tutorial suggestion?
Thanks in advance!

The sample code written for flex should work for an Air app.

IPhone no longer connects to iTunes via Wifi

On July 1,12 my iTunes did an automatic update. After the computer restarting and I entered iTunes and the following messages appeared:
Message 1: Must reinstall itunes to connect to ipod or mobile devices.
Message 2: CD/DVD folder must be located in itunes folder in order to use with itunes
I have 2 iphones (both 4s, bought at same time, both running iOS 5.1.1)and one will briefly connect to itunes via Wifi (I will identify this one as iphone1) but the other one will not (I will identify this one as iphone2). I have a PC with Windows 7.
When iphone1 is connected to itunes via wifi is disconnects randomly. Under: Summary > Version, it has the message: Connect this iphone using a USB cable in order to update or restore its software. When I have it connected with the USB cable, there are no problems. The settings selected under: Summary > Options > are: Open iTunes when this iphone is connected, Sync with this iphone over Wi-Fi, & Manually manage music and videos. The Setting under Backup > Back up to this computer (where it backs up to; I do not know)
iphone2 does not connect via Wifi but used to. It connects without issues with the USB. The Settings in iTunes > Summary are the same as iphone2 except that iphone2 is set as Backup > Back up to iCloud.
My iphone2 is my primary device. I use it exclusively; for music, taking photos, syncing photos to my Photo Stream folder on my PC, etc. The iphone1 is my spouse's secondary phone, so its not used as often (ie: only has 4 songs downloaded, used to take the odd picture, has a mirror image of apps from iphone2).
I searched Apple Support and tried the following solutions that didn't solve this problem:
How to restart the Apple Mobile Device Service (AMDS) on Windows (support.apple.com/kb/TS1567) &
Set the Apple Mobile Device Service Startup type to Automatic
I have not done this: Remove and reinstall iTunes and AMDS. I did goto the: iTunes for Windows: Device Connectivity Tests > iOS > iPhone - iTunes Troubleshooting Assistantand into iTunes > Help > Run Diagnostics. The results were: All tests passed. (My iphone2 was plugged in with USB. The iphone1 was connected via WiFi.)
What do I do now? Do I need to remove and reinstall iTunes? and if so will I lose all my itunes info (videos, music, apps, settings) or will it just show up after I install iTunes?

Hi Mitch,
It sounds like you have already done many of the steps, but I would like you to look at this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
and go over any that you may have missed.
Thanks for using Apple Support Communities.
Best,
Brett L

Unable to connect to Internet via Airport Express - 'cannot contact server'

I'm unable to connect to the internet via my Airport Express. I'm using OS 10.3.9, and had the same setup with no problems at a previous address, but with a different modem from the same ISP.
My AE is connected - the light is green - and my mac is connected to the network in Internet Connect. But when I open Safari I get an 'unable to contact server' message.
I've tried rebooting everything (modem, AE, Mac), and leaving modem/AE off for several minutes. Also reset the AE, but to no avail.
The connection works fine via Ethernet cable.
Any ideas?

Thanks, I checked out that advice doc (106798), but could not connect to the address (http://17.149.160.49) which is given to test if it's a DNS issue. My ISP says I shouldn't need DNS settings.
The service is PPPoE, and I went into Airport Admin Utility to check if the Airport was configured for this. Under Configure/Internet, I found it was set to 'Ethernet', so changed it to PPPoE. Then when I restarted I got connection status in the bar (and good Airport signal), but status flipped between 'looking for PPPoE host' and 'negotiating PPPoE host', sometimes sticking on one or the other each time I tried rebooting all gear.
Any other ideas?

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

I cannot find the 'WPA passphrase' to connect my printer via wireless and cannot find it in Airport utility (MAC says it cannot find any open airports)

MAC OS X 10.6.3 - desktop Mac
I browsed similar questions and saw that someone recommended going to the Airport Utility and then selecting manual set up or something- anyways, it could not find any airports. I have brought my printer from my house as my BF's has died - this is the first time it's asked for a WPA passphrase. We tried a very long series of capital letters and numbers as well as the password for the internet and both times the printer said "invalid passphrase"..... ......

Airport Utility is for administration of genuine Apple Base Stations. If you have a different Brand, Airport Utility can do nothing for you.
I think they're using ethernet.
To connect a Printer via Ethernet, no password is needed.
We already tried the password for the internet and that did not work...
If a password is required to connect to the Internet, then WiFi is likley being used, and that WiFi password is the one needed for the Printer connect wirelessly as well.
What make&model Printer? Is it indeed a Wireless Printer? Most connect via USB, but that would force it to use a specific computer to assist in printing.

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hi Tomiwa,
You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong v

Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.

Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

Remotley connect to mySql via mm.mysql

Similar Messages

Maybe you are looking for