Removal of Namesapce from generated target file in RFC to file Scenario
I am working on RFC to File Scenario. In target file we are getting the target namespace also. we need to remove it from the target file but how?
Thanks
Anuj Agarwal
Anuj,
Go to the Message Type you have created for your File.
You will see a field called Namespace. Just remove this / Delete this , and activate your message type.
Relaod the message type in the message mapping and now the namespace will not occur in the target.
Regards
Bhavesh
Similar Messages
-
How to remove a node from a target xml payload in reciever file channel
i have a scenario where i have to remove a node from my target xml file in receiver file channel and want xml as the output file. I don't want a fixed length file. How to do that in receiver channel? Do we need to use file content conversion for that?
that will result in giving you a fixed file or a separator defined file.
it will not give you an XML file.
In case you want a XML file, instead of using variable substitution, use Dynamic configuration and adapter specific properties.
Some ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm -
Revision: 21260
Revision: 21260
Author: [email protected]
Date: 2011-05-16 07:46:54 -0700 (Mon, 16 May 2011)
Log Message:
Update the qa-frameworks.zip to remove all comments from the base xml when merging config files.
Modified Paths:
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zipTry options=('!makeflags') in PKGBUILD.
-
SAP PI7.1 File to RFC to File
Hiiii,,,
i have doubt in mapping related to file to rfc to file scenario...
i have a source message type i have two field name ( 1.field_name 2.table_name)...i have to map this two fields to RFC_READ_TABLE function module to the field query_table and field_name...how to map this...
With Regards.....
DineshHi Dinesh,
i have one data type in source with two fields (1.table_name 2.field_name).
.i mapped this to target RFC_READ_TABLE to the parameter query_table and fielname in that function module
Please let us know if you have any mapping rules for creating the mapping, i mean
what are you trying to fetch from the RFC, what are the values you are sending and
what you want in response.
Its based on your requirement and you need to decide which field is to be mapped
to RFC structure.If you are getting error while testing , please let us know.
Also ensure that your RFC Function module is working when tested in sap system.
Go to Se37 and enter your Fn module name and test with the valid inputs.
check if its outputting the desired values.
Regards,
Srinivas -
Issue in File to RFC to File Scenario with BPM using Block Step
Hi Everybody,
I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth KumarHi Rajesh,
After going through the blog, i saw the trace messages. It says
" The exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar -
File to Rfc to File in pi7.1
Hiii,,
Iam trying file to rfc to file scenario...when iam montoring sender commuication channel it shows below mentioned error...wat may the issue..help me out
"Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.. Setting message to status failed"
With Regards..
DineshHi,
I checked the namespace its rite...whether i have to check the same namespace in sap system...if yes, where to find it..
I guess your File CC configuration is not correct. Namespace will be your source interface namespace in PI. This is a very basic question and should be searched on SDN / SAP Help before posting here.
Go through this SAP Help ...
http://help.sap.com/saphelp_nw04/Helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Neetesh -
Hi All,
I am trying to do File To RFC To File using BPM.
I am following the given link.
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1926. [original link is broken] [original link is broken]
I did exactly same .But it is showing error as "RED" in the workflow as I checked it in sxmb_moni.
I am very new to BPM.
Can anyone please help me solve this.
Thanks
RabiHi All,
Thanks to you.
My problem is solved now.
I checked by using tcode SXMB_MONI_BPE which is showing error as "Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed".
"No handler defined for this system exception".
So I checked all channels in RWB.
Problem was in my receiver RFC channel configuration.
I corrected it and it is solved.
Thanks
Rabi -
Is it possible to remove xml declaration from a target HTTP msg in PI 7.1?
Hello,
I am working on a SOAP to HTTP scenario in PI 7.1.
I am using a java mapping to create a target string. This target string does not contain XML declaration(<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>) in it.
To elaborate the issue, while testing the message mapping, this XML declaration is not being prefixed to the message content. But, in integration engine, the http target message is being prefixed by this XML declaration by default.
Output when tested in Operation Mapping(Desired result):
abc=123:def=456
Output been sent to receiver:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> abc=123:def=456
Is there any possibility to send a HTTP message to the receiver without this XML declartion. In other words, I need only the message content to be sent to the receiver.
Kindly suggest.
Regards,
SwethaHi,
You can use JAVA/or XSLT mapping
See this for Code
Remove Encoding UTF from xml declaration in PI -
I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu -
File to RFC to File Asynchronus
Hi
I have an a scenario that is I'm sending a request to an RFC throgh a File.. and based on that RFC will execute and it will send the results to the another file.. this is my requirement.. for this how can i approach.. (Request sending file name is different and Responce getting file is different but the RFC is the same only ..)
any body please provide me the suggestion..
Thanks
babuHi Babu,
This senario can be done in two ways using BPM and Using RFC Lookups,
Using BPM its an performance issue and maximum avoid to use it.In ur senario we can use RFC lookups,
Create an RFC Adapter.In Interfaces objects create two date types both are of file Sender file structure and receiver File structure.
In mapping u have to take sender as file and receiver as file only.In mapping u have to write RFC Lookup code were in the Code u have to call the RFC adapter and u have to pass all the incoming values into that and the responce which u will get from the UDF(RFC Lookup) Code that should be mapped to the target side file.
I have done the same senario in my project,I will work and it will be simple file to file senario were in mapping u will call RFC.
Regards,
phani
Reward points if Helpful -
File to RFC to File with BPM Scenario
Hi all,
I am trying to implement a Sender File ( async ) to RFC (sync ) to Receiver File with a BPM. I using the blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1926. [original link is broken] But it doesnt work. First message FileRequestOut is correct in SXMB-MONI, but the second is showing a error. I checked in SXMB-MONI-BPE and I say in workitem is follow message:
Message Error Workflow
Error handling for work item 000000001714
Work item 000000001714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
No reference message specified when sending a response
No reference message specified when sending a response
I configured my BPM scenario in this way:
( Sender File Adapter )
First Step
Receiver Step ( Asynchronous )
Mode: Asynchronous
Receive Message: File Request
( Receiver RFC Adapter )
Second Step
Send Step ( Synchronous )
Mode: Synchronous
Request Message: File Request
Response Message: File Response
Receiver From: Send Context
( Receiver File Adapter )
Third Step
Send Step (Asynchronous )
Mode: Asynchronous
Receive Message: File Response
Receiver From: Send Context
I have changed it, many times and I can get solve it. About my configuration objects, I think it is ok, because a tested my Interfaces in Configuration Test Tools it was ok. ( Receiver Det. Interface Mapping, etc )
I have seen in SDN, this error maybe Sencond Step must be Synchronous e Third Step must be Synchronous too. Is it true? In other hand, I have seen, it is possible to use a Async / Sync Brigde.
Could you help me about this problem?
Thanks for help
Best regards
Fábio Ferri
Consultant XI/ABAP/NetweaverHi ,
<b><i> I have seen in SDN, this error maybe Sencond Step must be Synchronous e Third Step must be Synchronous too. Is it true? In other hand, I have seen, it is possible to use a Async / Sync Brigde.</i></b>
In BPM did u used as
Recive Step Async
Synchronous Send Step
Send Step is Async
<i><b> it is possible to use a Async / Sync Brigde.</b></i>
No need to use Asyn Sync Step for this
Assign poins if u found hepful
Best Regards.,
V.Rangarajan -
File-XI-RFC, archiving file only when system ack ok. Is it possible?
Hi !
We have a File-XI-RFC scenario. We need the file adapter to archive the input file ONLY if the message was delivered ok to the RFC.
Should this work, using a BPM with this steps ????
1) Receive (file message type)
2) Block
2a) Send (ASYNC to the RFC, with transport Acknowledgement enabled)
2b) deadline branch at N minutes
The goal is that if the R/3 RFC receiving system is down, XI does not archives the input file and tries to process it later when R/3 is available. XI's File Adapter should find the file in the source directory because it was not archived when the process returned error the last time it was executed.
Thanks,
Matias.Hi Bhavesh !
I'm thinking in other idea, based on yours...
there should be 2 scenarios:
Scenario 1: takes file from SOURCE folder,archives it in a VERIFICATION folder, tries to send via RFC.
Scenario 2: takes file from VERIFICATION folder, checks via BAPI call if its content was succesfully inserted via the RFC of scenario 1, if this BAPI returns OK, send the data to a HISTORIC folder if the BAPI returns ERROR, send the data to the SOURCE folder. I could use the extended receiver determination feature here to select between the HISTORIC and SOURCE folders or BPM.
Always using EOIO, and file construction mode = APPEND in the receiving file adapters of scenario 2, to rebuild the input file based on the several splitted messages.
What do you think ?
Thanks ! -
Doubt in file to rfc to mail scenario
Hi All,
I have a doubt in configuring File2Rfc2Mail scenario,
Actually my requirement is to send flat File to RFC, and trigger mail alerts for successfull execution , like after successfully posting the mesg to rfc i need to trigger a mail alert to mailserver,
For that what i thought to do is file to rfc and from rfc response to mail , i don't know whether i can do like that or not , do anybody help me in this issue,
Thanks in advance,
Nousheen.Hey,
Your BPM will be like this.
recieve step(file)-> sysnchronous send step(rfc)-> send step(mail)
3 abstract interfaces:-
abstract asynchronous(file structure)
abstract synchronous (in this request as file sturcture and response as mail structure)
mapping between abstract synchronous and rfc(no need for transformation as mapping is outside)
abstract asynchronous(mail structure)
create two container variables, one for each abstract asynchronous interface.
use them in recieve step(file) and send step(file)
revert in case of any queries.
reward points if useful.
regards,
Milan -
NO DATAS IN OUTPUT FILE FOR RFC TO FILE SCENARIO
In RFC to File scenario, I am executing the ABAP program in ECC and generates a empty file in PI server.
I am getting the error message in SM58 of ECC:
u2018Bean Z_HR_OUTBOUND_DATA2 not found on host SDNPI1,u2019
'call FM Z_HR_OUTBOUND_DATA2 to ProgId ECCTOPI_OUTBOUND on host SDNPI1 wit'
RFc Source code:
FUNCTION Z_HR_OUTBOUND_DATA2.
""Local Interface:
*" EXPORTING
*" VALUE(FILENAME) TYPE BBP_ACC_DESCRIPTION-ACC_OBJ_NAME
*" VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
*" TABLES
*" ITAB10 STRUCTURE YSTRING1 OPTIONAL
*" P_STATUS STRUCTURE ZHRT0031 OPTIONAL
DATA : wa_status TYPE zhrt0031,
wa_itab10 LIKE ITAB10.
break-point.
LOOP AT p_status INTO wa_status.
CONCATENATE wa_status-pernr
wa_status-ename
wa_status-orgeh
wa_status-plans
wa_status-persg
wa_status-rank
wa_status-***
wa_status-icnum
wa_status-usrid
wa_status-dept
INTO wa_itab10-str1.
APPEND wa_itab10 TO itab10.
ENDLOOP.
wa_itab10-str1 = 'test'.
append wa_itab10 to itab10.
append wa_itab10 to itab10.
CONCATENATE sy-datum
'PYO_EMPDAT.TXT'
INTO
filename.
ENDFUNCTION.
And in the ABAP program the RFC is called like:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
in background task destination 'ECCTOPI'
EXPORTING
INTERFACE =
IMPORTING
FILENAME = filename
return = return
TABLES
ITAB10 = itab10
P_STATUS = p_status
When i am testing the standard program STFC_CONNECTION in ECC with the same RFc destination it works fine and creates a o/p file with the datas in it, but if i m executing the other function module it doesnt contain any data it.
What could be the error? and how to resolve the errors that i am getting in SM58?
ThanksBean Z_HR_OUTBOUND_DATA2_1 not found on host SDNP1, ProgId =ECCTOPI_OUTB
Change the case of your Program ID to lower ecctopi similar was the issue in this thread:
Bean ZFM_MODULE_OUT not found on host <XI_HOST>
And may be for the same reason even Michal used lower case program ID in his blog.
Regards,
Abhishek. -
How to implement Exception Handling error in IDoc to File and RFC to File
Hi,
We are implementing the two below scenarios :
1. IDOC to File
2. RFC to File
We have to implement the Exception Handling for the above two cases. Kindly could you provide the inputs to implement the Exception Handling for the above two cases.
Please provide the precious inputs to implement this.
Thanks,
RameshHi Ramesh,
The exception handling for idocs
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f1543d711d1893e0000e8323c4f/frameset.htm
Exception handling in File to IDoc Scenario
For RFCs
Re: Passing SAP Exceptions to a sync SOAP Call
Error Handling when using RFC
Exception Handling while Calling RFC - BPM
handle exceptions in remote function modules
Regards,
Prateek
Maybe you are looking for
-
Edge animation doesn't work properly or display properly in IE
I've created an animation using Edge CC. It contains a graphic created in illustrator which has a gradient in it. I've inserted it using the OAM method into my webpage in Dreamweaver. My first issue is that the animation doesn't display in IE10 unles
-
Hi , We developed a report for displaying serice number for work orders. It is working fine for work order with only one servive entry sheet . But when a work order consists of multiple operations with multiple service entry sheets it is not picking
-
I've been trying to update my iTunes Apps, in iTunes, for over 24 hours, I get a message instead... In other words, there are '155 Updates Available' for applications in my iTunes Library. I click on the "155 Updates Available" button and after a lon
-
I can't post in the Mac 10.5 Leopard forum...
Hey, The Leopard Forum won't let me post any new topics. Does anyone no why this is?
-
Start up log this error: Error Distributed COM id10010; (Delivery Optimization, the service is set delayed startup )The server{5B99FA76-721C-423C-ADAC-56D03C8A8007}did not register with the DCOM Within the timeout required. TH