Remove Boot Camp Windows Partition

I would like to know how to remove the Boot Camp windows partion all together from my computer.

When I try to use the Boot Camp Assistant it does not give me the option of removing it.

Similar Messages

Repartition a Boot Camp Windows partition

I am trying to restore an Acronis 10 image backup on a Boot Camp Win partition. Acronis does not see the Win partition. I tried Partition Manager 8 to repartition inside the Win partition but PM says it cannot see the drive letters, though its small tools software seem to be ok with that. Has anyone tried to restore an image of another drive on a Boot Camp Win partition ?
Thanks !
Andrei

You may want to post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

Boot Camp/Windows Partition

I'm thinking of going the boot camp route so as to run a few of my windows programs and would be grateful for advice from users who have done this. Boot camp assistant seems to say 32Gb as standard for the win partition - has this been found to be reasonable? also it advises to check for firmware updates - could only find one (V 1.1) posted Nov 2006. Presumably Leopard won't need this update? System spec = iMac 2.33Ghz Intel Core 2 Duo - 2Gb 667 DDR2 SDRAM - ATI
Radeon X1600 256Mb VRAM - 250Gb Serial ATA hard drive running OS X Leopard.

You may want to post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

How to hide (make invisible) folders in Boot camp windows partition

I just bought my parents a mac mini core duo and set up boot camp on it. I used FAT32 so the windows partition shows up in OSX as a volume called "NO NAME". I can also see all of the files and system directories in the volume as one would expect. I have 2 questions.
1. can I rename the "NO NAME" partition from within osx to something more like "WINDOWS" or "XP"? or am I stuck with "NO NAME"?
2. How Can I hide all of the system files and directories? I don't want other people in the house to be able to see anything on that partition except for 1 directory called "DropBox" (or something like that). This will protect the windows partition from being tampered with, and any files that need to be moved across partitions can just be placed in the "DropBox" folder.
I would appreciate any help with this.
thanks,

Do you have the "Developer" folder on the main level of your hard drive? If not, you can manually install the Developer Tools from the install disk(s) that came with your iBook.
I would be more than just a little worried about using the Terminal and command line codes to start hiding files & folders on your Mac if you're not already familiar with those tools.
-Doug

Is my (Boot Camp) windows partition safe after installing OS X Lion ?

I work with a mac and i have an Windows partition only to work at home for my company (i do not keep documents of photo's there).
I want to install OS X Lion, but i am affraid that my windows partition will be gone after installing OS X Lion.
Apple support can not guarantee that my partition wil be safe.
I dont have data saved in my Windows partition. I have this partition just to work from home, so the data is not the issue.
I want to know that my partition wil be safe after installing OS X Lion, because i do not know how to make a new partition.
What can i do to keep my Boot Camp partition up and running after installing OS X Lion ?
Who can help ?

I also was concerned about the early reports of 10.7 altering the Boot Camp partition id. I took The hatters advice and used the cloning method on two different MBPs (Vista & Win 7) with no problems at all.
FYI, below I have provided the steps I used to accomplish this process.
Use Yasu and Diskwarrior to prepare the existing Mac OSX 10.6.8 HDD partition.
Clone or update by smart clone to an ext HDD with SuperDuper or Carbon Copy Cloner.
Restart from the cloned ext HDD and select it as the startup volume via System Preferences / Startup Disk.
Install 10.7 Lion on the cloned ext HDD
Install Lion 10.7.2 update on the ext HDD
Restart the OSX 10.7 ext HDD and test and adjust the preferences if needed.
When satisfied, clone the OSX 10.7 ext HDD back to the existing Mac HDD.
The Boot Camp partition will not be altered as to drive id which appeared to cause problems for a few people.
The recovery partition will be on the ext HDD and can be used for trouble shooting.
A more convenient way to have the recovery/reinstallation environment is to create a Lion install USB thumb drive.
http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
http://subrosasoft.com/blog/2011/07/create-a-bootable-mac-os-x-10-7-lion-flash-d rive/

Accessing files on boot camp windows partition and Mac OSx partition

Before I install Windows 7 64 bit on my iMac using Apple's instruction manual, I have a question. The manual states:
*+FAT—Provides better compatibility, allowing you to read and write files on the Windows volume from Mac OS X. This partition must be 32 GB or smaller.+*
*+If you’re installing Windows Vista or Windows 7, the Windows partition must use the NTFS format.+*
I can read, but I want to be sure I understand these two statements as they relate to each other. Because the Windows 7 partition must be NTFS format, does this mean that there is no way to read, write or copy files from one partition to the other, no matter what the partition size is?
If that is the case, I assume the best way to move files from one partition to the other would be to use a flash drive or is that also not possible due to the file format on the flash drive? I also have an external hard drive used for time machine. Any way to use that?
How will I move files from one partition to the other? And yes, I really want to do this.

Hi,
ifarber wrote:
Hi Stefan --
Could you explain how using an external HD helps? If I wanted to use an external HD for read/write access from both Snow Leopard and Windows (XP and/or 7), would it need to be in a particular format? (No partitions - this would be a new, empty drive.) If, for example, I formatted it as NTFS, could OSX write to it if it were external?
Since I don't have/use files that are bigger than 4GB in size I am able to use FAT32 as file system on the mentioned external harddisk and flash drives.
Whether I use the harddisk or a flash drive for file transport depends for me on the amount of files I have to move.
Up to 8GB of files I move with a flash drive, everything above that I use the harddisk.
Stefan

How to remove boot camp partion after windows has been deleted

I have removed windows 7 from my mac book air. however the partition will not be deleted... how can I remove the partition.

Hi,
Usually the correct way to remove your Windows partition is to use the BootCamp Assistant again which should give you the option to remove the made Windows partition and revert back to one OSX volume.
After that's done a reboot of your Mac might be advisable. After the reboot use the BootCamp Assistant again to make the Windows partition and then install the (hopefully correct) version of Windows.
Only if that's not working (whatever the reason) :
1) boot your Mac from your OSX install DVD
2) choose your language and then 'ignore' (cancel) the installation
3) from the Top Menu (Utilities) start Disk Utility (DU)
4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
5) in the right pane use the 'Partition'-Tab
6) click to highlight on the ex-Windows partition you want to delete
7) click on the small '-' Button at the bottom
That should delete your former Windows partition
After that's done successfully
8) Drag the partition separator line until it encompasses the entire drive and then select apply.
9) Quit Disk Utility
10) reboot your Mac from your harddisk.
Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
Regards
Stefan

Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
Do anybody out there has an ideal of what to do to solve this issue.
Thanks
Pierre317

Hi Pierre,
more tips can be found here ...

Removing Boot Camp Components from Windows 7

Hi. I just got an Apple Keyboard with Numberpad. To make it fully work on my PC with Windows 7, I had to install Boot camp (I used my copy of OS X Snow Leopard). Once boot camp was installed, the media keys and volume keys started working perfectly as they would on a Mac, and the volume HUD also started displaying when I change the volume (looks good). But Boot camp also installed a bunch of other stuff, including drivers that I do not need, like iSight driver, bliuetooth, etc. It also replaced some of my own drivers, but that's not an issue yet. The question is, how can I remove boot camp assistant and its components that are useless to me? What to remove, and what not to remove? I just want full functionality of the keyboard, as I have it right now...
Thanks in advance.

Try restore to earlier would undo everything.
I'd go ahead and uninstall Boot Camp for sure.
Then Device Manager
You don't want Apple serivces and startup items - though Apple TimeServices checks the clock on every boot up.
MSCONFIG to disable any startupitem and services being loaded. But there should / might be one for keyboard.
From your OS X DVD, copy the contents to a folder on Windows and then look for kbmgr and move (copy and paste) to a new folder. You don't need any of the other things for motherboard, network, etc that you can rollback or uninstall in Device Manager.
Pick up Paragon Hard Drive Manager 2011 for an easy disk to disk OS clone for backup - you can boot from either hard drive w/o problem, just change the cable or the BIOS boot device.
Hard Disk Manager Suite 2011
I'm surprised that if Apple sells their keybaord for PCs that they don't include just a device driver, or that Windows didn't pick up on what to install automatically.

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

Boot Camp / Windows Partion... Can it be installed on a separate hard drive

I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
Thanks for you feedback.
Mike

Hi Mike,
since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
Reasonable size depends on what you want to do with it.
Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
Add to that the HD space you need for the programs and data you use/produce.
And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
Windows XP at least 30GB, Vista at least 50GB.
Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
Regards
Stefan

How to separately backup the Boot Camp drivers partition from Leopard DVD?

I used Disk Utility and my only (and expensive) DVD+R DL disc to make a backup copy of my Leopard DVD, and it worked perfectly to install Leopard on my MacBook Pro.
However, that was before I learned that the Boot Camp drivers was now on a separate, PC-only partition on the DVD. So while my backup copy works great to install Leopard, I have no backup of the Boot Camp driver CD.
I tried several tricks, including booting into Windows Vista and using PowerISO to attempt to make an ISO image of the Boot Camp driver partition (shows up as 400 MB or so). However, the ISO image generated is a whopping 7.6 GB, same size as the full Leopard DVD. I then tried to take that back into the Mac OS side, but it was "unmountable". Toast 8 was able to make an image of the full DVD that (I'd presume, as did previous versions of Toast) would contain both partitions of an ISO-9660 volume, but when I mounted that disk image with Toast 8, I didn't get the two-mounted-volume like I'd normally expect to see.
I'd really like to know how to backup this volume - I demo this system regularly on my MacBook for clients, and I don't want to have to keep using my nice, pristine Leopard DVD when I have to do my weekly re-install. Any thoughts on how to get a simple extraction of the actual volume used for the Boot Camp drivers?
Thanks much for the time,
MBJ

Hi Stefan,
Thanks for taking the time to reply to my question! Although I think your steps will "work", per se (and I will try them out as soon as I can), I'm something of a purist in regards to my backups and so this method seems a little hackish as opposed to a process that actually images the volume in question (I'm also curious from a technical perspective, as the Boot Camp Assistant Beta used to allow for a dedicated MacintoshDrivers disc to be burned from it—I liked that method better, to be honest).
Thanks again! I'll keep checking back here for other comments, and will let you know how the method you suggested works out.
Best wishes,
MBJ

Is Paragon's "HFS+ for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too. I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac. Is it safe?
Thanks.

Thanks, Templeton. Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great. But once I leave the OS X / Parallels environment the folder sharing access disappears. So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives. (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
Thanks GeekBoy. Paragon HFS sounds risky with Parallels. I'll be eager for more feedback about risks of using that combo from whomever can offer it.

Boot Camped Windows 8.1 looks low quality?

Hello,
I just recently Boot Camped my Late 2013 Macbook Pro 15 inch so I could play Windows-based games. Everything runs fine, but the only thing that bugs me is the quality of the games, or basically any window. The resolution is fine, everything is proportioned correctly. The taskbar and the blue "frame" that surround the windows are in a crisp, HD quality. But the content inside the windows is soft, and moderately pixelated. For example, when I go the the Google homepage, on Mac, the Google logo is very crisp and looks HD. When I go to the Google homepage on my Boot Camped Windows, the logo is pixelated. Same thing goes for games. Is there any way that I can fix this? To make the games and windows look "better" in a higher quality? Thank you in advance.

The deep search finally finished:
And here's the text version:
MS Data                338695552 651468152 312772601
   MS Data                340391264 653163864 312772601
   MS Data                490233848 803006448 312772601
   MS Data                490233855 803006455 312772601
   Mac HFS                490234708 491504243    1269536
And after continue:
And text:
Disk /dev/rdisk0 - 251 GB / 233 GiB - 490234752 sectors (RO)
     Partition               Start        End    Size in sectors
>D EFI System                    40     409639     409600 [EFI]
D EFI System                    46     409645     409600 [EFI]
D MS Data                 12844161 247217280 234373120
D MS Data                 25922952 338695552 312772601
D MS Data                 27618664 340391264 312772601
D Mac HFS                 97104348 235516637 138412290
D Mac HFS                 97154892 235567181 138412290
D Mac HFS                174921356 176190891    1269536
D Mac HFS                174921727 176191262    1269536
D Mac HFS                174921894 176191429    1269536
D Mac HFS                174922198 176191733    1269536
D Mac HFS                174922470 176192005    1269536
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:

Completely unable to boot camp windows 7 on Mac Pro

I am at the end of my rope. I have a Mac Pro 1,1 - 2.66 quad core, 7 gigs of ram. I have been trying over and over and over to Boot Camp Windows 7 onto a secondary hard drive. But every single time time, it hangs indefinitely or straight up freezes during "completing installation". I have scoured the interent for answers. I have tried typing shift+f10 when it hangs and typing in explorer.exe. This doesn't work. I have tried having all USB devices unplugged. I have moved the drive from bay 2 to bay 1 and having the other 2 drives empty. I have tried multiple discs. And from what I have found, the Mac Pro is completely unable to boot from a USB drive with the Windows 7 installer on it. WHAT DO I DO? Please help!

your mac pro like mine has older EFI firmware that does not support booting Windows 7 64-bit.
You will have to remove all other drives.
Before you do, reformat the drive you want ot use as Windows Master Boot Record and FAT32, then format the drive with Windows during install.
Get rid of whatever is on the drive now.
You will be limited to 1.9GB RAM
Windows 7 Home Premium supports just one cpu, you have two.
64-bit Windows requires UEFI which you don't have and would need to edit and modify the DVD (reburn after using Imgburn).
Easy method: do basic install on a PC and then put the drive in the Mac Pro.

Remove Boot Camp Windows Partition

Similar Messages

Maybe you are looking for