Remove labview 2009 without using add/remove program

Hi all,
I have problem with removing LabVIEW 2009.
I have deleted some folders in C drive, NI folder.
Now I can't run my LabVIEW 2009 and it doesn't show up in my add/remove program list.
I tried to delete all folder and files in C drive under NI folder, but error message pop out shows that I do not have the authority to do so.
So, how can I remove it completely ?
I intended to reinstall LabVIEW 2009 after I have removed it completely.
Appreciate your help very much.
Solved!
Go to Solution.

That is why I say try to reinstall LabVIEW. It might just do a repair of your installation. Then you can use add/remove programs to completely uninstall it.
But when you completely uninstall it there will be NI folders remaining. These are things like user.lib.
Have you tried to reinstall the runtime engine?
One last thing. I don't know how you got your install so messed up but remember that if you build an installer you should not install that onto a system with the development environment. There are so many things that can go wrong.
=====================
LabVIEW 2012

Similar Messages

ITunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Attempted update to iTunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

If i purchase a movie from iTunes on my Windows 7 PC is there a way I can download it and watch it offline without using the iTunes program?

I have been trying to figure out the answer to this all day I want to purchase The Interview I know you can download but I want to know if you can watch it offline without using the iTunes program like will i get the file to this movie i purchased?

Thank you i been looking for a answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!

Help writing a program that uses Add/Remove programs

Hey everyone,
I'm trying to create a program that will utilize add/remove programs to repair an installation of a program. Specifically I'm trying to write something that will help automate repairs of QuickBooks installations. I've tried using Filemon to figure out what executables I might need to call and I've searched high and low in the forums and Google for help but I'm not getting anywhere. Is there some sample code out there that shows you how to work with the Add/remove programs screen and the programs in it?
Thank you for any help you all can provide me.

[email protected] wrote:
It might be possible if you use the JNI, ** ouch ** That's going to hurt.
but more than likely, Java is a poor choice for the program that you're trying to write.I'll second that. You might want to try C# if you want to write a more Windows-centric program. Its syntax is extremely similar to Java's (I wouldn't say that it was ripped-off of Java, but you could say that probably and not be wrong). But it is a powerful language with a rich library and would interact with the Windows libraries much more readily than java would.

I cannot remove 4.0.1 after upgrading to 5.0.1 using Add/Remove programs

I have windows XP. I have downloaded ver.5.0.1 and when I tried to Remove ver.4.0.1 using Windows Add/Remove it would not do it.

Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it.
Where did you get the phone?

Interface using add/remove data set i.e set operator

Hello...Experts,
I have another problem on add/remove dataset.
Suppose I have 3 source tables having same structure. let's say TAB1(empno,ename,deptno),TAB2(empno,ename,deptno) and TAB3(empno,ename,deptno),but the values in tables are different, and target table TARGET_TAB(empno,ename,deptno,v_ename,v_empno) and I want to map using Union and Intersection operator.
My mapping is like this:
Dataset1
TAB1 TARGETTAB_
empno--------------- empno
ename--------------- ename
deptno-------------- deptno
v_ename
v_empno
Dataset2
TAB2 TARGETTAB_
empno----------------- empno
ename
deptno----------------- deptno
ename------------------ v_ename
v_empno
Dataset3
TAB2 TARGETTAB_
empno
ename-------------------ename
deptno------------------deptno
v_ename
empno-------------------v_empno
That means one column from TAB2 and TAB3 is mapping with one extra column of TARGET_TAB table.
when i am performing this it and click on flow it showing the error ODI-20350: your diagram contains one or more FATAL/CRITICAL errors.
Is it possible to do such interface??? How to do that interface???and what action to take to avoid the error???
Please refer me.
thanks.

Hello Sir...
when i am taking different no of columns for different tables, then flow is not working as it is showing the fatal error as i ve told before..
But when I took same no of columns for all tables with null values in TAB1(sal and job is null) and TAB2(job is null), after data flow no data is loaded into target, as there is an intersection and null value in table.
For example:
"select empno,ename,deptno,sal,job from TAB1 where deptno=10 union
select empno,ename,deptno,sal,job from TAB2 where sal>1500 intersect
select empno,ename,deptno,sal,job from TAB3 where job='manager' ";
This query return "0" rows selected ,as sal and job column is null and due to intersect total no of rows become '0'.
without taking null value columns in TAB1(sal,job) and TAB2(job), can we make interface???
thanks.
Edited by: soumya.rn on Mar 29, 2012 4:41 AM
Edited by: soumya.rn on Mar 29, 2012 5:17 AM

I am unable to uninstall 3.0.10 using add/remove nor uninstall. It is taking 31Gb of my hard drive.

Everytime I click "remove" from control panel Mozilla Firefox 3.0.10,it flashes and nothing happens. Tried the Firefox helper.exe in the uninstall folder and it only flashes. Still taking up 31Gb of my hard drive.

It is unlikely to be using 31Gb, sometimes the about of disk space reported by the Windows control panel's add/remove programs dialog is very inaccurate. The Firefox 3 program takes up about 25Mb
You can manually remove Firefox by deleting its files and folders as shown here - http://kb.mozillazine.org/Uninstalling_Firefox

Create a new row in a table without using add new row button

I want to add a new row to the table without using the add new row button of the table. I'm not able to display default row in the table. Though if click on apply the record appears after saving in the database. Any thoughts how to implement this functionality.

Here is what you have to do.
1) You have to handle this in processRequest()
2) In the AM code , u need to check if there is already a row exisit or vo is blank
if (vo.getFetchedRowCount() == 0)
// first time
vo.setMaxFetchSize(0); // THIS IS REQUIRED.
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
else
//If already rows are there then you suppose to insert in the end
// i assume you would have execute your vo
YourVORowImpl row= (YourVORowImpl)vo.getRowAtRangeIndex(0);
vo2.insertRowAtRangeIndex();
It should work.

Cannot uninstall foxfire using add remove

i cannot uninstall mozilla foxfire by going to control panel in windows xp and removing foxfire

One option is just to download the file with the new version from Apple's website through your browser, open up that file, and let it fix the error on its own as it is installing the new version over your old verison.
http://www.apple.com/itunes/download/

26 Aug 2010: auto update to Java 6.0.621 has stopped Firefox working. I used Add/Remove to remove the update and Firefox launched and displayed the website I was at (UK's Postal Museum) when the auto-update happened. What should do?

I recently updated to Firefox 3.6.8. During the install routine I thought I had said OK to the process of automatically updating associated addons so when the Postal Museum prompted for an update to a new release of Java I let it happen. I sent them an email but do not remember closing down Firefox. Hour later, I clicked the Firefox button to launch it again; two seconds of eggtimer then nothing else. Tried to launch it from Start/Programs/Mozilla/Firefox. Same eggtimer. (Running WindowsXP on a middle-aged desktop).

In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r32
* Java Plug-in 1.5.0_09 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Remove guest access without using 'cisco connect'

Hi all,
I just installed a new Linksys E3000 and was able to use "Cisco Connect" up until I decided to forgo the "Wi-Fi Protected Setup" and use manual settings.
Well, after having done this, I can no longer use Cisco connect, and I really want to get rid of the additional "-guest" network which seems to be tagged onto my main network. Is there anywhere via the browser-based admin that I can get rid of the guest access feature? If there is, I can't seem to find it.
I tried switching back to the "Wi-Fi Protected Setup" feature so I could go back to using connect, however it no longer seems to see my router when I try to connect to it, so this is no longer an option for me. I'd really like to avoid reinstalling the router all over again.
thanks for any info.

If you have configured your Router using the Cisco Connect software, then you it secure your wireless network with an password. If you have any firewall and antivurs software on your router then it will protect your computers against worms.
To use the FTP feature of your router you need to enable ftp login on your router, which you will find under the storage tab of your router.

How to run and stop LabView code without using start and stop buttons

Hey
I've attached my code that I'm going to use with thermocouples. What I'm trying to do is: when I hit start button the code should run for a minute then stop for 5 minutes and then start again, this process should be repeated twice . Could you please suggest the appropriate way to do it.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
temp. samples.png ‏24 KB

Rajab84 wrote:
Hi altenbach
Thanks a lot for your help, I've tried the state machine, I’ve created 5 case structures as following: start for 1 min, stop 5 min, start again for 1 min, stop 5 min, restart again 1 min and finally stop. I’ve tried the code and it didn’t work. Could you please have a look at the attached code and let me if I need to change something. I think I’ve not used the elapsed time function properly.
Best Regards
Rajab
you really dont need to repeat cases (2x)...using a shift register will reset your timer function once the timer has reached it's set limit. the "bool crossing" is used to tell me when the "5 min" case is done and increments the cycle count....ofcoarse, change the "seconds" constant to your desired time on the elapsed timer of this example
and you could "or" the stop to the "compare = 2" or change the select "wait" to "exit" with a constant connected to the stop
Attachments:
Untitled 2.vi ‏42 KB

Transfer FSG Report without using FSG Transfer program.

My client won't accept a database link being created between the production and development systems.
How can I transfer an FSG report from the development system to production? (FNDLOAD??)

Please see:
Is It Possible To Use FNDLOAD To Migrate Configurations Or Data To Another Instance? (Doc ID 1316916.1)
Is it possible to copy FSG report objects from one instance to another? (Doc ID 813719.1)
Thanks,
Hussein

I own a print company have room of puters and a older server- i want my mac and pc people to access files from anywhere without using an aftermarket program

can I get this 5 license server - 2012, and me from home or road or artist from home or road got to an ip addy and have access to our 1.2 tb of customer files to edit after hours or fix or pull for meeting, do I need a real servr or can u use a computer
with 1tb had drive and a 2tb plug in dive to access files from anywhere on mac or pc and network all y shop and pull files from anywhere so I don't need a wlan but have an all time go to place to get files-- it will be on 24/7 with battery backup- I need to
get up to date and tonite had to drive to work to pull a file I could have I think gotten with this software-- can anyone help or explain am I getting right thing and will it work its 3 am and I am just back from work, I could have been done at 9 if I have
a server access--THANKS IS ADVANCE--TECH LEVEL- COMPARED TO YOU GUYS A 1- IN GENERAL A 3-4
THANKS

Hi,
I'm not very clear about the exact requirement.
I assume you would like to:
1. Able to access a share in company from anywhere.
2. Above to use a server from anywhere.
3. Above to use a server in your company from anywhere.
If I'm correct, the solution is Could products or Remote Desktop Service with VPN.
Please refer to Windows Azure to see if a cloud server could help in this situation.
http://azure.microsoft.com/
Also you can use OneDrive to store files on cloud side and you can access it from anywhere.
And for VPN please refer to this article:
Configure a Remote Access VPN Server
http://technet.microsoft.com/en-us/library/cc725734(v=ws.10).aspx
Let us know the one you prefer and we could discuss it more.
If you have any feedback on our support, please send to [email protected]

How to uninstall NI drivers that are not removable via "Add/Remove Programs"?

Hi,
I am trying to uninstall older versions of NI MAX and DAQ drivers via "Add/Remove Programs" in Control Panels on a Win2000 test PC, but nothing happen when the "Remove" button is pressed. The same issue does not happen with any other drivers or applications installed on the same test PC. These two drivers might have been installed improperly before. Please advise how I can uninstall them without using "Add/Remove Programs"? Thank you very much for your help.
Valen

Hello LA,
The window that I have is different from the one you posted. Please see attached for mine. When I clicked on REMOVE, a message popped up and disappeared within a couple seconds. And the message is as following: "The installer is verifying the installation, please do not reboot while this dialog is being display." This same message popped up every time REMOVE is clicked but I have no luck on removing MAX.
This test PC is for legacy testing and it was with Windows 98 and have an ISA DAQ card installed that requires DAQ driver 6.9.3. Can upgrading the test PC to Windows 2000 corrupt the installation?
Looking forward for your advice. Thank you.
Valen
Attachments:
Add Remove Programs.doc ‏57 KB

Remove labview 2009 without using add/remove program

Similar Messages

Maybe you are looking for