Remove menu bar from second monitor maverick

Hi, Can i Remove menu bar from second monitor maverick ?
Thanks

Apple has sort of screwed up the whole full-screen / multi-screen features of OSX. I get it's hard to achive it all in a "perfect way" for everyone but the so called "improved" multi-screen features of 10.9 add a number of issue on top of the "fixes".
1. Switching between apps with CMD + TAB is bugged with using 10.9 screen-setup. The OS doesn't understand what screen I'm using and the CMD + TAB feature shows up on screen 1 or screen 2. The only way I've found to controll this is by activating the DOCK on either screen which is a very bad solution.
2. Spotlight searching always follows the "active" screen. At least 10.9 understands what screen is my active one but in this case I never ever want screen 2 to have Spotlight on it. Very irriting.
3. Remembering application positions. If I open an app from the dock on screen 1, place it on screen 2 close it and again open it from the dock on screen 1 the app will open on screen 1 and not screen 2. Some apps will remember certain windows on the correct display. A solution is to open the app from the dock on the display you want it on. Very irritiating.
4. Swiching between apps is also bugged. Concider I have mail on screen 2 and a new mail window on screen 1. I CMD + TAB to Safari on screen 2 after starting to write the new mail on screen 1. No problems here. If I now howvever CMD + TAB back to mail, the last active window (new mail window on screen 1) won't be active. Very irritating.
As noted above, going back to what we had in 10.7 and 10.8 solves these issues but doesn't solve Apples horrible fullscreen app issues. I'd go as far as saying Apple hasn't really fixed anything in 10.9 - only cause more issues and confusing behavoir. Fullscreen apps are often very lacking in funktion, having safari or mail fullscreen renders them on a large screen very very limited compared to "maximized". It's also very confusion that you are required to travel between virtual desktops to use full-screen apps. I personally would prefer the option of "layered fullscreen apps". For example VLC allows me to work this way.

Similar Messages

  • HT5891 Is there a way to remove the menu bar from a secondary display while still using the "Displays have separate spaces" mode?

    Is there a way to remove the menu bar from a secondary display while still using the very useful "Displays have separate spaces" mode?
    The reason I ask is that most full-screen video playback in most applications, from iTunes to Flash/Silverlight plugins do not take up the full screen, instead leaving space for the menu bar (in the case of iTunes) or leaving the menu bar present on top of the video (for fullscreen Flash/Silverlight videos).
    This is annoying for several reasons ranging from the obvious distraction factor to the fact that 1080p video is not played back at native resolution on a 1080p display.
    If there is no way to disable this functionality while maintaining separate spaces, I would (humbly) suggest that a future update to Mavericks allow non-Lion-style* full-screen apps to take over the entire display.
    *Lion-style full-screen apps are those that animate into a full-screen mode when the opposing-arrows full-screen button in the upper-right-hand corner of the window is pressed.

    No. Turning that off reverts to the old display setup. You have one desktop spanned across all displays. The menu bar appears on the primary display only.

  • How to remove menu bar for a single tcode

    Hi,
    I created a Transaction iview with gui for html and now i  want to deactive menu bar for a single tcode.
    I'am able to remove menubar by passing parameter in Webgui but it will remove menu bar for all.
    Can anybody provide me solution.
    With regards,
    Pradeep.B

    Hi,
    It's really possible. You can define an ITS service on your R/3 and apply parameter ~WEBGUI_SIMPLE_TOOLBAR. With this parameter you can hide all bars, using different values (3 bits). You can use, for example, value 132.
    After that, you define an IAC iview on your portal with your ITS service.
    Hope this helps,
    Iván.

  • Has anyone removed the stand from the monitor?

    I love my 30" Cinema Display, but it sits too high on my desk, and find myself tilting my head up to see towards the top of the screen. I hate the thought of modifying the work of art that it is, but if I removed the stand, it would sit perfectly at eye-level. Obviously, I would have to make a stand/support to allow it to be free-standing. Either that or modify the desk itself. Has anyone tried removing the stand from the monitor? Feedback?

    As NullUnit mentioned, it is quite easy to remove the stand but you will need the VESA adapter kit to replace it. This will give you the standard 100mm VESA mounting holes that you would then connect to any mounting arm you wish.
    Personally I bought this MX Desk Mount Arm as it was rated to hold the weight of the display (~30#) whereas others were not (~18#). I originally mounted the display in a vertical/portrait orientation but the arm didn't go high enough so I had to mount a 6" block of wood to my desk first. I enjoyed the monitor so much that I have since moved it to become my primary monitor. The arm allowed me to lower the display all the way to my desk so I could just look over it (to watch TV). Couldn't have if it was still on the stand.
    Hope this helps.

  • For GUI status in Transaction SE41 to remove menu bar.

    Hi all,
    I want to remove menu bar in se41 so that i can have a pop-up display with out menu bar. can anybody please suggest me ASAP.
    Rewards to all.
    Thanks,
    Arthi.

    Hi Arthi..
    While creating a GUI Status in SE41
    <b>Select the Status type as : DIALOG BOX (instead of Normal Screen)</b>This will Create the GUI status without Menu bar as per popup diaolgs.
    <b>Reward if Helpful.</b>

  • Remove black bars from social videos on Muse

    Hi,
    How can I embed videos from youtube/vimeo without having black bars appear above and below them? See screenshot...

    This happens due to aspect ratio of video , you can try these options :
    http://stackoverflow.com/questions/19794000/removing-black-borders-on-a-vimeo-iframe-embed -using-css
    http://www.reelseo.com/remove-black-bars-youtube/
    http://wistia.com/blog/remove-black-bars-from-online-video
    http://stackoverflow.com/questions/26617154/responsive-fullscreen-youtube-video-with-no-bl ack-bars
    Thanks,
    Sanjit

  • How can i remove the menu bar from my second display

    I am using a Mac Mini for our auditorium projection computer and since upgrading to OS X Mavericks, the menu bar is now on all displays. I needto remove it from the projector display so it doesn't show on the projector screen. Is there an option for this?

    https://discussions.apple.com/message/23496295

  • How to open a new browser window without toolbar, location, and menu bars from AIR?

    I have the following problem in my Flex+AIR application. I need to embed an ActiveX component that has JavaScript API inside my application. I tried to embed it inside <mx:HTML> component but unfortunately, AIR doesnot support plug-ins or ActiveX controls. So I've decided to open it in a new browser window. I tried navigateToURL(...) method but it has two problems - it is opening a new tab in the existing browser window and there is no way for me to configure the new browser window appearance, like removing toolbar, menu bar, location bar, etc. Then I tried to open a new window from JavaScript running inside <mx:HTML> component using window.open(...) API but it doesn't open a new window at all.
    Is there any way for me to open a new browser window without toolbar, location bar, etc. (which will run ActiveX control, so it cannot be AIR window) from inside AIR?
    Best regards,
    Arkady.

    Is it possible to open a new browser window using JSP?a JSP page is also an HTML page, this is client side stuff, you can do it with JavaScript.

  • Enable/disable second monitor Mavericks - only software solution.

    I am looking for a way to disable a second monitor (plugged into the Display Port of a 2011 Mac mini) without unplugging it. Does anyone know of a software solution?
    When I am working I like that second monitor for desktop space, but other times (watching Netflix for example) the second monitor (in my case TV Sony Bravia) taxes the video card to much and degrades video playback performance. It would be great to have a software switch to ignore the second monitor. Right now, the only way I have found to do this is to unplug the display port cable from TV.
    SwitchResX doesn’t recognize any of monitor or TV in Mavericks, so the app is useless. It would be fantastic if anyone know software solution (I really would like to have plugged second monitor all the time).
    Thanx

    I've been using SwitchResX for quite a while, sometimes buggy but very useful: http://www.madrau.com
    best,

  • Remove address bar from file explorer (using regsitry)

    This used to be possible in 2008, but I haven't been able to figure out how it's done in 2012 R2. The old method was to add a key under IE, and it would also remove the address bar from windows explorer - but this method
    no longer works. So is anybody aware of what key needs to be changed or modified in order to make this happen. Further, ideally this change would happen in HKCU.
    Thanks

    Hi,
    >>That would seem to remove run from start menu, not the address bar from file explorer.
    Yes, this setting will disable Run.exe. However, this setting will also prevent users from accessing local or network resources by typing the accessing paths in the address bar of File Explorer.
    I am not completely sure why you want to remove the address bar in File Explorer. However, if our target is to restrict users from accessing network resources by UNC path, in my opinion, enabling this setting a better way to go.
    In addition, regarding this topic, the following thread can also be referred to for more information.
    Hide Windows Explorer Address Bar
    http://social.technet.microsoft.com/Forums/en-US/987305c6-bd48-4107-bcf5-84d4fff4097d/hide-windows-explorer-address-bar?forum=winserverGP
    Best regards,
    Frank Shen

  • Moving/removing menu bar menulets

    I want to remove and/or reorder various menulets (e.g., for Airport, bluetooth, MS messenger, time machine, etc.) that are on the very top menu bar. I thought it would be a simple chore, but I've tried click-drag, control-drag, option-drag, and command-drag and nothing works. They just are stuck there as if glued. There MUST be a way to remove or reorder them, isn't there? In the few months I'm had my Macbook I've learned so much, but this silly little chore has defeated me!

    You have PithHelmet installed or you have SIMBL installed. They are not compatible with 10.5.2. Perhaps uninstalling SIMBL and any utilities dependent upon it such as WiFind may fix your problem.
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.
    There are also several shareware utilities that can uninstall applications:
    AppZapper
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at www.versiontracker.com or www.mackupdate.com.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Want to remove scroll bar from navigation pane in Web Template

    HI All,
    I have a report created in WAD.When I am using navigation pane, I get a scroll bar there.
    I want to remove that scroll bar from navigation pane.Tried increasing the height in the property of same but nothing is helping.
    The expanded option should be ON and do not want to group characteristics shown in nav. pane.
    Please suggest, if there is any other way to do that.
    Thanks,
    Anu

    Why do you want to expand it? Generally when you click on Nav pane, it should show the assigned chars under it. No scroll bar comes up with  below settings:-

  • Removing scroll bar from Nav Panel & Work Area layout

    Hi Guys,
    I have a requirement to remove the scroll bar which appears between nav panel and Work Area in 'Nav Panel and work area layout'.
    I would like it to be as a single page as we get in narrow: wide layout.
    Well I could just do it by using a narrow:wide layout, but the challenge is I also need the collapse/expand Icon which we get in Nav Panel/WA layout.
    I am looking fcor help with either
    1. Removing the scroll bar from Nav Panel/WA layout
    Or
    2. Adding collapse/expand  icon to narrow:wide layout.
    Thanks,
    Yomesh

    Hi Yomesh ,
    If you want to enable the expand/collapse icon , then you can set the property named Show Tray of the page to yes and then test . By default the property meant for showing the expand/collapse icon is set to yes . You only need to enable the tray and check .
    I did not get the requirement that you have with respect to scrollbar . Where is that scrollbar appearing that you want to remove?
    Regards
    Mayank

  • How to get the languge flag in the menu bar on OS X Mavericks?

    I recently switched from OS 10.5 to 10.9. On my old system, there was a way to get a little flag up in the menu bar that allowed me to switch between input languages easily. That seems to be gone or have changed. Anyone know how I can get it back?

    Jack Mitch wrote:
    a way to get a little flag up in the menu bar that allowed me to switch between input languages easily. That seems to be gone or have changed. Anyone know how I can get it back?
    Apple Menu()>System Preferences>Keyboard >Show keyboard&Character viewer in menubar
    check and uncheck to get your flag

  • Removing title bar from JFrame after it isDisplayable

    I know if a frame is not in a Displayable mode, ie not visible you can remove the title bar from the frame with myFrame.setUndecorate(true) in JDK 1.4.0, but I was wondering if you can remove the title bar from the jframe once it is displayed, and conversly if already removed, can you add the title bar back to the jframe. If there is no java solution, is there a jni solution.

    if you remove the title bar from a JFrame, wouldn't you be create a JWindow?

Maybe you are looking for

  • How to know the stake amount of both the won and lost opportunities

    Hi, I need to create a report. I would like to have a chart related to the last year opportunities. I would like to know in the same reports, the stake amount of the opportunities with the sales stage = Closed/Won, the stake amount of the opportuniti

  • Created PO does not exist

    Hi all, I really hope that you can help me. A PO was created with reference to a service PR. when the we tried to do the service entry, there was an error message that the PO does not exist. i do not know how this happened because the system gave us

  • Sending meesages to multiple receivers

    Hi All, Is it psossible to send an output messages to mutiple receivers without using BPM. If so then how to do it. Thanks Abinash

  • Performance of using a "Like" Filter *is not due to straight index issue*

    Hello, We have just released an Oracle APEX app to the users and ran into a performance issue in the production version that was not in development. The interactive report goes against a simple view that returns Data similar to: NAME VALUE MIN MAX BE

  • Hw do i set background color for ComboBox?

    If anyone knows how to set background color for disabeld (setEnabled(false)) of ComboBox in Windows Look and Feel. It will help me a lot. I don't know hoe to do it regards arun.