Remove the last task of the stand approval process workflow in SharePoint Designer

Hello,
I am building a workflow in SharePoint Designer.  I have added the standard approval process that comes stock in SharePoint. I also have the approval set up to handle change requests.  This is where my issue is.  A user can eather approve
a document or request changes(according to some limitations i have in place on the InfoPath form).  If they approve, the workflow is complete.  If they request a change, a request change task gets assigned to another user.  This other user then
completes their review and submits their response.  this then kicks off the approval process again to the original user to approve. 
1. User A recieves approval form - requests a change
2. User B recieves Form - submits that changes have been made
3. User A recieves another approval form - then can approve
I am looking for a way to eliminate step number 3.  I want User B to be able to complete the approval when he submits the changes.  I tried copying and pasting the approve button from the default infopath view onto the view that UserB
sees, which has a data submit action when the button is clicked. This did not work.
Any ideas would help

Hi,
According to your post, my understanding is that you wanted to add a “request a change” button in the Task Form.
If you can cutomize the task form, I recommend to add button directly and then add conditions and rules to the button.
After you add the “request a change” button, the workflow is similar to the
Multiple Approval Workflow.
Here is a great blog for your reference:
Implementing Workflow using InfoPath 2010 and SharePoint designer 2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

  • Taking my 20" Cinema display on the road; how do I remove the stand?

    Hi everyone,
    I'm planning to do alot of work on location this summer and would like to find a way to remove the stand attached to my 20" LCD Cinema Display so that I can pack them both into a smaller case. I've just removed the allen key cover on the right hand side (from the front) and was presented with a more complicated challenge inside the mount. It seemed to me to be a good time to consult the support forum before things went horribly wrong....
    Are there instructions anywhere that show how to dissasemble the hinge where the display meets the stand? Without destroying either?
    Can anyone recommend a lie-flat/two piece stand I can take with me on location?
    Many thanks,
    Andrew

    Look at me; I'm clever.
    Solution found at http://manuals.info.apple.com/en_US/073-0933.pdf
    After removing the two screws, the stand didn't want to pull off easily and I thought it may still be attached. It turns out that the attachment point was just sticky and needed a firm pull.
    Thanks internet!

  • How do i remove the stand

    How do i go about removing the stand? I have no choice but to remove it cos then I can pop it in a backpack and carry it on a plane. someone please help
    Cheers

    If you fave a Rev A (first edition) or a Rev. B (Ambient Light Sensor) you can remove the stand by removing the back of the computer and disconnectiong the stand from the inside. The current (Rev C, iSight) model does not have a removable stand.
    A word of caution, the only real reason to remove the stand was to use a wall mount device. Leaving the stamnd off will leave a hole in the back of the computer and will allow dirt and/or other foreign objects to get into the computer.
    Proceed with caution.
    David

  • How i remove the stand from an Intel iMac 17"  ???

    Please help...is it possible to remove the stand from an intel based imac 17" . If yes how i do it?
    Thank you

    Only the 24" iMac models have user removable stands. To remove the stands from the 17" & 20" models requires opening and some disassembly of the computer. This is complicated and difficult, and would most likely void any warranty you have left on the machine if it was not done by a Certified Apple Technician.
    But it has been done by some users in the past;
    Why no VESA mount!? grrrr....

  • Has anyone removed the stand from the monitor?

    I love my 30" Cinema Display, but it sits too high on my desk, and find myself tilting my head up to see towards the top of the screen. I hate the thought of modifying the work of art that it is, but if I removed the stand, it would sit perfectly at eye-level. Obviously, I would have to make a stand/support to allow it to be free-standing. Either that or modify the desk itself. Has anyone tried removing the stand from the monitor? Feedback?

    As NullUnit mentioned, it is quite easy to remove the stand but you will need the VESA adapter kit to replace it. This will give you the standard 100mm VESA mounting holes that you would then connect to any mounting arm you wish.
    Personally I bought this MX Desk Mount Arm as it was rated to hold the weight of the display (~30#) whereas others were not (~18#). I originally mounted the display in a vertical/portrait orientation but the arm didn't go high enough so I had to mount a 6" block of wood to my desk first. I enjoyed the monitor so much that I have since moved it to become my primary monitor. The arm allowed me to lower the display all the way to my desk so I could just look over it (to watch TV). Couldn't have if it was still on the stand.
    Hope this helps.

  • How to remove the stand of iMac 27 with retina

    I buy a 27' iMac in US and am going to bring it back to China next week.
    I'm going to remove the stand, and put the iMac to my 30' luggage. I've tested, it can be hold in the luggage, but the question is how to remove the stand "elegantly" because it's whole new and I don't want it to be "fixed"? Is that possible?

    Good morning, Macwhy.
    The best box you can get is the original packing it came in.   It would have to travel as accompanied Luggage and I strongly advise you to insure it for its purchase cost if bought in China.  I would also back up the content on a separate drive.   Thank you for the stars and good luck with the move.

  • How do I remove the stand from my 24' intel imac model ( A1225)

    Hello, I am moving my imac 24' from Europe to the states in my baggage. The stand mustbe removed to fit it in. Some models allow a business card or credit card to insert in the lever of the stand and the back of the imac housing where the stand is attached to. Thus oin pulling the stand levekl down with the acard inserted you will see a few srerws to unscrew to removing the stand. This is not with this imac 24' intel model number (A1225)
    Are there any tips or help that one knows to removing the stand?
    Thanks..

    ==> Removing the 2007 24" iMac aluminum stand
    ==> Removing a VESA mount and replacing the aluminum stand
    I recently inherited a 2007 24" iMac that had been VESA mounted.  I searched all the online boards to figure out how to remove the VESA bracket and install the aluminum stand that I bought on Ebay.  Despite 6 years since the iMac was made, I really didn't feel the online posts gave a clear answer, so I felt compelled to give my input.
    First, the 'latch' mechanism that locks and unlocks the stand/VESA mount is RIGHT next to the top of the slot -- it's about 1/16" into the casing and shaped like a shallow L-shaped ledge that extends most of the length of the slot.  Here's a very effective way to hit it:
    * uninstalling stand;  put the computer on a bed at the edge; push the stand downward, somewhat hard, then slip a business card into the top of the slot,slanted 45 degrees upward.  do not push the business card hard at all.  it will hit the ledge/lever quickly.  leave it there.  now, insert a drivers license or credit card ON TOP of the business card, so it hits same ledge/lever but with more strength.  push a bit and start wiggling the stand.  the latch will release and you can now push the stand down to lock in the extended position, then remove the screws, install the VESA
    * uninstalling VESA:  the stand mechanism is already in the LOCKED/out position.  I spent about an hour trying to get it to lock into the extended position.  wrong.  it's already extended.  once you remove the VESA, install your stand, then follow the above guidance to unlock that mechanism and get your computer back upright.
    There are a lot of threads on this topic.  I hope this helps some.  My main insights are two;  1) the latch/ledge is very close to the top of the slot, and 2) that ledge can be caught fairly easily by pushing the stand down and using a flexible cardboard business card, then superimposing a harder plastic card on top while you wiggle the stand.

  • Removing the Stand for imac 21.5 in for International Flight

    I am going on an international flight and I want to bring my imac as a carry on.  I need to remove the stand. Is this possible for 21.5 Inch imac.  I bought it new in Jan. 2011

    Have a look here: http://www.youtube.com/watch?v=uQurKC7z4II
    or this one might be better: http://davidchumac.blogspot.com/2009/11/how-to-remove-imac-stand.html

  • Triggering the Payables Approval Process PL/SQL

    Hi
    Pls let me know how to trigger the payables approval process from the PL/SQL.
    I have a conc program which interface the legacy data into payables, i am calling the payables open interface from the conc program .
    Once the invoices are validated i need to trigger the approval workflow from the conc progam, can you pls let me know how to make it work.
    Regards
    yram

    Hi
    Pls let me know how to trigger the payables approval process from the PL/SQL.
    I have a conc program which interface the legacy data into payables, i am calling the payables open interface from the conc program .
    Once the invoices are validated i need to trigger the approval workflow from the conc progam, can you pls let me know how to make it work.
    Regards
    yram

  • How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

    Hi to all
    I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
    the document.

    Hi ,
    According to your description, my understanding is that you want to create a workflow which contains review and approval process.
    For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
    approving, a pproval workflow is started. The whole workflow is like :
    More information, please refer to the links below:
    http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
    http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • TimeSheet Approval Process workflow

    Hi All,
    Please let me know how time sheet standard behavior of approval workflow.
    I ran the timesheet approval process, I found in the event trace, the following business objects are showing for the process.
    When employee requests for a timesheet approval, there is no workflow triggered ( no receiver in the SWEL), it is showing BO IDOCPACKET and event MASSINPUTFINISHED and when approval approves the request it is triggered the workflow (receiver is WORKITEM) single step type.
    Please clarify me on
    1. Why IDOCPACKET is triggered?
    2. Why ATTENDENCE is triggered?
    3. whenever a time sheet request is created by user, approver will get notifications, where these configurations have been maintained?
    4. When approver approves/rejects the request, initiator will get the notifications, where these configurations have been maintained?
    Thank You in advance.
    Regards,
    Pavan.

    1 and 2) Are you sure that IDOCPACKET and ATTENDENCE have anything to do with CATS? I don't believe so. The time stamps of these events most probably don't event match with your CATS release and/or approval.
    If you need to set up some kind of approval process workflow, if I remember correctly it is configured here: SPRO > Cross Application Components > Time Sheet > Specific setting for CATS Regular > CATS Regular > Set up data entry profile.
    Regards,
    Karri

  • How do I remove the stand from my HP W2371b monitor?

    I am trying to install my monitor on a wall mount and I have to get the stand off before I can.  I got the flat "foot" part off with little or no issue - - but the actual "stand" part will not budge! I don't want to damage the monitor - am I missing a tab or something?  Please advise.
    This question was solved.
    View Solution.

    Hello MDMOM,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are looking to remove the base to your HP W2371b Monitor. Simply remove the screws in the image below and the base should pull out.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • 27": How do you remove the stand?

    My boss just got a new 27" Cinema Display, and would like to attach it to the monitor arm he's been using with a 30" Cinema Display.
    We have a VESA adapter, but we can't quite figure out how to remove the 27" original base. The 27" display's manual provides no information.
    Help?

    The VESA kit that Apple sells comes with a plastic card very much like a credit card. You slide the card through the top opening right where the stand meets the display to disengage a latch within the display. The manual that ships with the VESA adaptor does a good job explaining it but like you said there is no information in the monitor's user manual. If you need further assistance let me know. I would not attempt it without full instructions since it is a bit tricky.

  • Retail in-app purchases and the apple approval process

    Hi, I'd like to clarify and discuss a workflow for the submission of retail folios and apple's in-app approval process. When submitting the in-app purchase for a retail download how do i allow apple's review team to demo/test the in-app purchase? Since the in-app purchase isn't yet approved and I publish it in the folio manager as public + retail, it won't show up in the library view. Does apple first approve/enable the product ID before testing? Just how does apple review this retail folio?

    Does apple first approve/enable the product ID before testing?
    Yes, it is recommended submit an in-app purchase with a demo Screenshot of the issue in advance. Apple reviews in-app purchases based on the meta data and screenshot. Most of the publishers get a batch of in-app purchases pre-approved to avoid any issue near the publication date.

Maybe you are looking for

  • While creating message in Satellite system we would like to get popup scren

    Hi Gurus, While creating message in Satellite system we would like to get a popup screen that should populate/show list of persons responsible/Business partners to whom the mail should go directly to their mail box. Do we have to develop a report for

  • IMAQ AVI Read Frame Trigger Error

    I have an application that is creating avi clips of a process.  This application is writing frame data which is read later in another application.  It is at this point, during the reading of the data that an Error -1074396037 Trigger error is occurin

  • Two pick list output types

    Hi, I have a requirement related to pick list output types. A pick list output type is already configured and assigned to shipping point and is used for taking pick list for SD customer delivery. I want to create another pick list output type which i

  • Change AreaSeries form property using ActionScript

    I'm trying to build an area chart from a dynamic set of data in a database. I never know how many series I'll have, so I have to program them in ActionScript. My problem is that I can't seem to set the form to "curve" in ActionScript like you can in

  • Datasource 0WS_TAROBJ_ATTR does not extract any record

    I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record. According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads dat