Removing J2EE stack from dual-stack installation

Hello.
Does anyone know if it's possible to remove the JAVA-stack from a ERP6.0 dual-stack installation ?
We have a ERP 6.0 system running HCM services. The ERP system is installed as dual-stack, but the JAVA-stack is not in use as we also installed a separate NW 7.0 JAVA system hosting portal and java hcm services.
Thank you.
Gerhard.

Hi,
Yes, you can drop Java part from existing dual stack system.
1) Stop cenrtal service instance and all dialog instances of your system.
2) Also, stop J2ee engine of CI from SMICM.
3) Hash out all Java parameters in your default and instance profile (like j2ee, exe/j2ee, exe/jlaunch, jstartup etc.)
4) Delete central service instance.
5) Delete Database schema
6) Delete directories (/usr/sap/<SAPSID>/DVEBMGS<xx>/SDM and /usr/sap/<SAPSID>/DVEBMGS<xx>/j2ee)
Thanks
Sunny

Similar Messages

Want to remove Lossless files from dual-format library, keep elsewhere

My iTunes library consists entirely of music ripped from audio CDs. Each CD was ripped twice, once in Apple Lossless format, once in AAC format.
For several reasons (chief among them the desire to free up a lot of disk space on my iMac), I want to remove the Lossless files from my iTunes library. But I want to keep all of the AAC files there as they are, along with my playlists (all based on the AAC files only).
However, for a measure of future-proofing, I still want to keep the Lossless files. And whenever I buy a CD, I want to still import it as both Lossless and AAC, keeping the Lossless files handy while adding the AAC files to the iTunes library.
I must obviously begin with an external Firewire drive big enough for my Lossless content. How do I proceeed from there?

I would take this approach, but others might have better suggestions.
First, when you get your external drive, copy the entire iTunes folder to the external drive which will copy everything (media files, database files, artwork, etc.).
Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location. Now you can sort your library by "Kind" which is the format it is encoded as and all the Apple Lossless files will be grouped together. Select the first one, scroll down to the last one, Shift-Select the last one which will select all the ones in between and hit delete! Now your internal drive library is everything except Apple Lossless.
If you wish, you can switch back to the external drive library and do the same for the AAC files.
Now when ever you add a new CD you can do it a couple ways. But probably the most straight forward is to simply put in the CD, open the internal library, import as AAC files. Switch to the external library and import again as lossless.
Patrick

I can't install, repair, or remove BootCamp drivers from my Windows installation

I have Windows XP SP3 installed on my Macbook Pro. When I installed Windows originally it failed to completely install BootCamp drivers, so I don't have advanced trackpad and keyboard features. I've downloaded the latest BootCamp drivers v3.2 that still run XP, but I always get a message saying that "the installer has encountered an unexpected error installin this package. This may indicate a problem with this package. The error code is 2753." I don't have anything in C:/Program Files/Bootcamp (It doesn't exist), and the Bootcamp icon in Control Panel doesn't work.
I can't install, remove, or repair the drivers, not even using the software that came with my Mac OS X install DVD. On the Mac side, I'm running Snow Leopard. I've searched Google for help and couldn't find anything. Does anyone have any ideas? I've already gone through the registry and removed a bunch of Apple-related stuff, but it didn't help.
Thanks! Shayne

At last I got it all to work. I had to go into the registry and delete all references to Apple software and drivers. Some of the entries were locked, and I had to change permissions to allow me to delete them, which was probably the reason the installer kept failing. I finally got Boot Camp 3.0 installed off the Snow Leopard DVD and then upgraded to 3.2. I had a hickup with the trackpad drivers which didn't work, but I found a fix online -- the drivers labeled "TouchPad" were banged out, and I had to switch them to Generic USB Human Interface and then back to Apple TrackPad drivers, which fixed the problem. Now everything is working beautifully with multi-gesture touch pad and keyboard extensions. Yay!!!!!

How can I completely remove OSX Server from my Mavericks installation?

I moved OSX Server and the Server file from the system Library but Server still controls my File sharing with my Sonos app. It will not let my Sonos app access my music folder.

Perhaps there is a more correct way to uninstall server but just in case there isn't, if you remove this file and restart that should stop the server.
/Library/LaunchDaemons/com.apple.serverd.plist
James

How to Remove Windows 10 from Dual Boot

Windows 10 is Microsoft’s newest release that aims to clear all the mishaps and mistakes that were present in Windows 8.1. There’s no doubt that Windows 10 is fast and easily manageable operating system that can a...

WT72 20K, is better.
I [font='Microsoft YaHei', Verdana, arial, sans-serif]suggest [/font][/color]you can upgrade a ssd or super raid module.

How to restart Java Engine in ABAP+JAVA dual stack installation ?

Dear Experts
if i use stopsap r3 in this dual stack installation - it stops both ABAP & JAVA Web Application Servers.
I want to restart only JAVA Weba pplication server.
How do it ?
Thaks in Advance !
Rgds

But theoritically they are 2 indpeendent installations like
AS ABAP
AS JAVA
..Do you aggree ?? really am not good on basics!!
During the installation also - if select AS ABAP & AS JAVA - it will become dual installation
and it does not show
any dependency while installing that AS JAVA requires AS ABAP.[Installation Component Selection and Dependency Screen shot|http://i303.photobucket.com/albums/nn153/S0002919350/SAP%20Issues/Oracle_Patches.jpg]
Installation Component Selection and Dependency Screen shot
Is it because if AS ABAP is down - AS JAVA UME is 001 client - and Java authentication fails ?
Can we de attatch from ABAP UME for my requirement like - running JAVA WAS alone w/o ABAP.
Regards
PR
Regards
Edited by: P.R. SRINIVAS on Jun 16, 2008 4:15 PM

Restart the Java-Engine in a dual stack installation (java+abap)

Hi,
how is it possible to restart or start only the j2ee-engine in a dual stack installation. We have a JAVA- and a ABAP-Stack and want only restart the JAVA-Stack. In windows i can use the MMC of SAP but how is it possible in UNIX.
regards,
sharam

Hi Eric,
i konw this TR, it doesn't work. There are two possibilities:
restart j2ee-local
restart j2ee-global
we try it with j2ee-local because we use a dual stack installation. What could be the problem. Is there an other possibility? How can i restart the j2ee-engine directly on my unix machine?
regards,
sharam

Is SAP PO 7.4 dual stack installation??

HI experts,
Could anyone let me know if SAP PO 7.4 is a dual stack installation or can we go for single stack as well.
As PI 7.4 is based on HANA , so while working on it shall we use ICO or old classic configuration. Shall we go for java based adapters(eg IDOC_AAE/HTTP_AAE) or old abap based adapter..
Thanks,

To add few cents - May be your basis guys just read the title
Support for Dual-Stack discontinued in SAP NetWeaver 7.4 in general with exceptions
SAP NetWeaver 7.4 is positioned as the follow-up on-premise release for SAP NetWeaver 7.31.
SAP NetWeaver is among other things optimized for SAP HANA as the foundation for the SAP Business
Suite on SAP HANA project. This means that dual-stack deployments and implementations are not
supported any longer. The only exception to this rule is SAP NetWeaver Process Integration on a traditional
database system, which still requires a dual-stack implementation. However, note that a single-stack SAP
NetWeaver Process Integration Java exists that offers 95% of the features of classical dual-stack
implementations. Therefore, customers should investigate whether an existing SA
Reference : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60bf3650-e219-3010-ef93-d11928aa8f8a?QuickLink=index&…

HT3739 How do I remove an app from a stack?

I haven't been able to find any information on removing an app/ file from a stack, only adding to or creating stacks. Is it possible to remove files from stacks? I'm pretty sure that if i delete a stack it also delets all the files in the stack is there any way to delete a stack without deleting the files inside the stack?
Thanks

Are you talking about a folder on the "Dock"? If so, then that is just an Alias to a real directory. So removing the folder alias displaying as a stack from the dock just deletes the alias.
If you wish to remove a single item from the stack, then you remove that item from the actual folder. The stack should have an "Open in Finder" button, which should take you to the real folder.
You could also create a new folder, then populate that folder with Aliases to all the apps or files you wish to have in a stack, then drag the folder to the dock, then option-click on the folder in the stack and make it a stack.
DO NOT move the actual applications, folders, or files to a collection folder, just create aliases for the apps, folders, files you want in that collection stack. Command-Option-Drag an app, folder, file to the collection folder will create an alias, and not move the item itself.

J2EE stack install - ctrun error???

Hello all,
I have done several installations and have never come across an error like this one :-|
The only difference in this case is that I specified to install the J2EE stack only and not the ABAP stack (when installing all of the components only needed the J2EE stack).
When doing the installation, I get an error of :
ERROR: can't change to central Executable-Dir /usr/sap/KDP/SYS/exe/ctrun (No such file or directory)
I saw a /usr/sap/<SID>/SYS/exe/run directory but not a /usr/sap/<SID>/SYS/exe/ctrun directory
I have also seen that the "ctrun" directory seems to be associated with dialog instances (when doing note searches, I have seen this). I have specified that this J2EE server be a central - and not dialog - instance.
Question 1 - Is it possible to have a central system with a J2EE stack only? Or, is the requirement that the central system must have both the J2EE and ABAP stacks?
Any help, hints or advice is greatly desired. Of course, points will be awarded.
TIA
Edited by: Casey Harris on Jan 5, 2009 5:26 PM

Hello all and thanks for the responses
The installation master I am using has the following defined in the CDLABEL.ASC file:
SAP Business Suite 2005
Installation Master for:
SAP NetWeaver 7.0 SR3
SAP ERP 6.0 SR3
SAP SRM 5.0 SR3, SAP SCM 5.0 SR3
SAP CRM 5.0 SR3
Number 51033511
I found the following link:
http://al-infotech.com/news/2006/12/30/use-sapcpe-for-kernel-update-on-netweaver-2004-as-java-by-yu-nong-zhang-sap/
But the one that seems to help the most is this one:
http://help.sap.com/saphelp_nw04/helpdata/EN/4f/37783021fc11d288cd0000e83539c3/frameset.htm
it speaks of "automatic adjustment".
When doing this installation, I specified that this was to be a CENTRAL instance and not an application server. From my understanding above, it seems that this sapcpe is being ran even though it should not be. Not all of the conditions have been met ... One can see that the error files are in the CENTRAL directory:
ex: sapinst_instdir/ERP/SYSTEM/ORA/ *CENTRAL* /AS
Question 1: Why is the sapcpe being ran when this is not a dialog instance but a central instance?
Question 2: Also, am I correct in understanding that there is no way to set up a central instance that is has the J2EE stack only?? No components were chosen that would require the use of a dual-stack. Only the J2EE stack was chosen.
TIA
Edited by: Casey Harris on Jan 5, 2009 11:20 PM

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

BT stack installation on Satellite A200-23U

Hello!
Then I install Toshiba Bluetooth stack, setup manager stops at 5 point in progress bar and never ends, I solve this problem by renaming bth.inf.__. (__ added automatically to this file during installation) into bth.inf, BUT there is another problem are shown: all drivers installs successfully, but system always 50% cpu loaded, right-click on blue icon in tray causes unclickable menu, and after all ALL Bluetooth drivers automatically remove from windows device manager if I wait about 50 minutes
I think that some process in my Vista deletes this drivers after 50 min from my system but I don't know why it can be! Maybe OS want to install her own stack and that's why delete my Toshiba drivers...
Any answer can help me!
P.S: I tried almost everything (different stacks, fnf8 key, so. please, don't tell me usual answers like: newest version of stack and so on), just remember - this problem isn't standard and have maybe some interesting and unusual decision
Waiting for responses to any above-shown problem that I have with my Bluetooth.

Thank you for your reply!
Yes my notebook equipped with bluetooth cause about 5 times i succeessfully install drivers i made it so: install BT stack and then it on 5 points, i install bt monitor and about 1 time in a day this trick can complete! After that i connect bluetooth mouse and it works, so i make the decision that i have bluetooth in notebook (bluetooth mouse work perfect), BUT after 50 minutes Vista automatically remove my devices from the device manager! i try to install again but nothing... it looks like very strange for me! maybe there is some process that stops driver installation or process that remove my devices!
I fighting with bluetooth already about 14 days ?))) i just want to use my bt mouse but it is a destiny that i can't do that! Today i reinstall vista from reanimator dvd, but that doesn't help! I want to install vista ultimate or XP sp2 to solve this problem but something inside me screams that it also can't help me with bluetooth )
Call to ASP - yes it can be my last chance but i don't sure that it is a real hardware problem ) cause 1 time a day about 50 minutes my bluetooth work perfectly... but of cause if i don't find the decision of problem i will call to them
More than that, in this forum was 2 guys with the same problem, and in my country (russian forum) i find other 1 man with such problem, so there are only 3 people with this BT problem

Remove default stacks, display shares in sidebar, time machine in menu bar

Hey everyone,
I'm setting up a couple laptop labs for a school with Leopard and have run into a couple minor issues.
I created a standard user and configured this user as I would like future user profiles to be like. I then copied the Library and Documents folders of the user into the default user template (/System/Library/User Templates/English.lproj/). Everything worked as expected, except for the following...
1) When a user logs in (Active Directory), their dock contains the Documents and Downloads stacks along with Time Machine. I do not want them! I had removed all three from the user I used as a template, but for some reason they seem to still appear with new users. What I would like is a 100% empty dock (minus the Finder and Trash of course). The dock will be populated via Workgroup Manager.
2) Mounted network shares do not show up via the Finder's sidebar. This makes it a little confusing for users to save to folders on these shares as they have to navigate to them a bit differently than they do in Tiger. I had drug all the shares I wanted onto the side bar, but it seems this does not stick once you log out.
3) The Time Machine icon appears in the menu bar. I had gone into System Preferences under the user I used as a template and unchecked "Show Time Machine status in the menu bar" but this does not seem to apply with new users.
They're all relatively minor issues, but if anybody has any suggestions I'd love to see if I can fix them!
Here is a little background on how the machines are set up: The machines are all managed via Workgroup Manager. The Open Directory server is running 10.4.11, but I seem to be able to control the Leopard specific settings by using the Leopard version of the Server Admin tools without any problems. All our users come from Active Directory. If you need any more info, let me know!
Thanks in advance!
Message was edited by: Anthony J

yes, i see I replied way before you were finished with this. as you are dealing with a server you might be better off posting in the [OS X server|http://discussions.apple.com/category.jspa?categoryID=96] forum.
I don't understand why your modified dock doesn't stick. i actually have done exactly what you describe in the past with the user template folder and the modified dock was displayed correctly. all you really need for the dock is one file:
~/Library/Preferences/com.apple.dock.plist
when I copy this file for my current user to the template directory, all new users have the same dock as I do now. same with the sidebar. the file there is
~/Library/Preferences/com.apple.sidebarlists.plist
I don't think there is a way to keep connected servers in the sidebar once you disconnect. You could create aliases to them while connected and stick aliases in the sidebar.

Change R/3 client after EP7 / NW2004s double stack installation (UME settin

Hello everyone,
we have install NW2004s with choosing usage type EP as double stack installation (means ABAP and Java) and using SAP R/3 as user persistence. At the install point, only the client 001 is known / can be used. After the installation (EP test runs without errors) we do a client copy to create a ABAP client (100) for usage as CUA/ User store. Later we patch also the ABAP and Java to SP6. Now the UME settings of the EP ar still pointing to the client 001. But we want to use the client 100. Question is, where should we change the client -> in the Portal, system administration -> system configuration -> UME configuration -> R/3 or in the visual administrator of the WAS ?? Is there some concerns to change this HUME settings ?? (means JAVA will hangs or.... ?? Have any body some experience with this or tips ??
thanks
mario

Hi Luis,
yes this works with no Problems. Following steps you should take / recomended to do:
1. take your ABAP client Copy from Client 001 to your new Client on which now resident your UME
2. look if all EP related User (J2EE_admin, maybe ADS_user..) and also the User which you have created are copy to the new client
3. Go in the Portal to System Administration, SystemConfiguration, then UME Settings, and Change in the SAP Config the Client 001 to your new Client. Before Save take a connection test
4. Aslo you can do this Change with the visual Admin, but we do this in the EP System Admin iView
5. Restart the Portal / WAS
Tipp: If the connection-test faild later (we had this also) it works nevertheless o.k. as long you had the right settings - maybe thats a bug in the UME settings of SPS6
mario

J2EE stack 01

Hi, I am installing EP60 NetWeaver 04 on a W2K platform and have run into a snag. The first step of installing the J2EE engine went ok and now I have a 630 J2EE engine running. The next step calls for upgrading the J2EE engine from SP3 to SP4 following the instructions contained in the 'sap Netweaver 04 support package stack 01 guide'
I have found the guide but on page 29 it says that the sp4 files are included in the 'sap netweaver 04 dvd 51030142_sap_netweaver_04_sap_J2EE_engine_6.30.sp_4'.
I simply can't find this dvd.
Can anyone give me a push in the correct direction?
Thanks
Rich

I have followed the above recomendations on a win2k3/ora platform and have installed the portal sp3. Part of the verification is to signon to the portal, but this seems to just hang.
Were others able to signon, or did you all just put sp9 for EP6 in first and then try and signon.
Lastly talking ep6 to stack 9 requires how many files (sapinst as before, ep6, but do I need the j2ee again-as I am extracting to a different directory?
also is there a specific order to the extracts (as we did for stack 9 for WAS 6.40)?

Removing J2EE stack from dual-stack installation

Similar Messages

Maybe you are looking for