Removing the business area from the WBS element

Hi Experts,
I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
Now I want to remove the business area from WBS element.
Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
But still Business area field is grayed out for that WBS element.
Could you please let me know how to remove the business area in this case ???
Regards,
Pradip

Hi,
Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
Create new wbse with correct BA & then create pr & po.
Regards,
Sandeep

Similar Messages

  • Can't change an asset that originated from a WBS element that is now closed

    When we try to transfer or make a change to an asset that originated from a closed WBS element we receive the following error message. 
    System status CLSD is active (WBS CP-00000999-009-009)
    Thanks, Kevin

    When we remove the wbs element number under the "Account assignment for investment" heading, then we are able to perform the asset transferwithout reopening the wbs. We were wanting to use that field so that our auditors could see the wbs from which the asset was created. If we do not use that field, how can we trace an asset back to the originating wbs?
    Thanks,
    Kevin

  • How to remove business area from the Hyperion report

    Hi All,
    Kindly tell me the steps required to remove the business area from the Hyperion report.
    Regards,
    Ajay

    s

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • Trasaction code for invoices detail which has hit the WBS element

    Hi All
    Usually my users receive a list of assets which were capitalized from AUC account through Project system.
    Generally charges are posted to WBS element and then users capitalize assets using that WBS element through settlement.
    Users have been asked to give all the invoices detail which has hit the WBS element from which that particular assets have been capitalized. is there any transaction code to get the all invoices detail which has hit the WBS element from that particular assets.
    thank you

    If that is what you want then why are you using WBS element?
    You can directly create the asset on goods receipt via MM module and then the invoice will automatically go against that asset.
    If you still want to use the WBS element for capitalisation then you can use the WBS element statistically with a type 90 cost element posting and the sset will still be crteated when goods receipted/ invopice receipted

  • Unable to close the WBS element because of inventory issue

    Hello
    We are facing one issue where we are trying to close one WBS element but getting error that stock still exsists.
    When i checked in table MSPR i found that for one of the material in the WBS element the physical inventory process is still not complete
    Physical Inventory Blocking Indicator ,Indicator that specifies that the stock is blocked for a physical inventory has value A(Physical inventory not yet completed for amterial) in that table for one of the materials.
    KIndly advice how to complete the proces and close the WBS.

    Dear,
    Check the links:
    Physical inventory block in material master
    Re: Physical Inventory & Goods movement process
    Cycle count not counting correct number of items
    Regards,
    Syed Hussain.

  • Settling the WBS element costs to an AuC

    Please Explain the procedure for settling the WBS element costs to an AuC & then to asset?

    Hi,
    Please follow the below sequence of steps for this:
    1) For WBS element where the asset has to be created, AUC willbe created automatically when the WBS element is in release status to get this investment profile should be assigned to WBS element in Control Tab
    2) You can see in the system status show as AUC to see the AUC number follow the path
        EDIT-> WBS element -> Investment program--> Asset under Construction where you can see the AUC which is created automatically
    3) Once the above two steps are through, for settlement to AuC goto transaction CJ88 give the WBS element number select the processing type as partial captalization and execute all the costs pertaining to that. WBS elements will be automatically settled to the AUC which is created for that WBS element
    Thanks,
    Prithwiraj.

  • Which PO and PR table can be used to get the WBS element field.

    Which PO and PR table can be used to get the WBS element field. Thanks.

    HI,
    In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
    It shall be checked from EKKO table with PS_POSI feld.
    The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • RFC function to get the WBS Element formatted string

    Hi,
    Is there an RFC function I could use which would do what the CONVERSION_EXIT_ABPSN_OUTPUT does?
    We are using Project IDOC to replicate WBS element in our procurement system. The IDOC only provides the unformatted version of the WBS Element id.
    Thanks
    Michael

    hi michael,
    I believe BAPI_PROJECT_MAINTAIN is the bapi you are looking for ..
    also you could refer the thread below for sample code of the same
    [LINK|Update WBS element;
    This bapi will help you update the WBS element ..
    you could also refer the following wiki
    http://wiki.sdn.sap.com/wiki/display/PLM/HowtouseBAPIinProjectSystem+Module
    Best regards
    Manthan.

  • Which field matches to the WBS element

    Hi,
         I am doing an interface program, in that I need to populate the WBS element in trasaction VA01 under the tab Account Assignment. I am using the BAPI 'BAPI_SALESORDER_CREATEFROMDAT1'.
    Let me know which field matches the field WBS Element in the structure 'ORDER_ITEMS_IN' which is returned from the said BAPI.
    Thanks in advance,
    RG

    Hi
    In VBAP there is a field for this WBS ELEMENT <b>PS_PSP_PNR</b>
    check for that in BAPI structures
    check the field ASSORT_MOD of BAPIITEMIN .
    Reward points if useful
    Regards
    Anji

  • How to find the WBS element for the payment document?

    Dear All,
    How to find the WBS element in the payment document?...I know in payment doc there will not be any WBS but is there any option where I can find in any of the Tables.
    I am in the process of developing a Z report where i need to fetch the payment documents based on WBS. Can any one please help me on this.

    Hi Ram,
    As you are not giving any input of WBS at the time of payment you cannot fetch this directly. But to know the WBS for the reporting purpose on which WBS the payment has been made, you can develop a Z-Report. The WBS elements of clearing documents against the payment entry can be fetched out.
    In this report if there is a single payment against many invoices also possible with different invoice and WBS elements to be displayed on the Z-Report
    Regards
    Divya S

  • To display the WBS elements for last one year

    Hi All,
        Im displaying the details of all active employees. I need to display the WBS elements of all active employees for the last one year alone. Can anybody help me out to get this...
    Regards,
    Surya

    Hi,
    select all the PERNRs with
    BEGDA and ENDA as per ur req
    to check if they are active or not
    use the FM
    HR_BEN_US_CHK_TERMINATION
    then take all the active PERNRs and use
    them to query PRPS table with
    OBJNR = activePERNR

  • Possible to show the WBS element in the down payment request?

    Hi,
    We have a

    Hi,
    We have a Plant maintenance order with a WBS element.
    We have created a PO for a vendor. The WBS element is not shown on the PO.
    Is it possible to show the WBS element on the down payment request of that vendor?
    Thank you for your feedback.
    Kind regards,
    Linda

  • FM To Check if the WBS Element is blocked for posting.

    Hi,
    Is there any Function Module that would check if the WBS element entered for a NON PO invoice has been locked for posting.
    Regards,
    Vipin Rajan.

    try fm STATUS_READ_MULTI
    A.

  • Function module to get the wbs element by entering Assignment No.

    Is there any Function module to get the wbs element by entering Assignment No.???????
    Thanks and regards
    Manish Thakur

    hi Manish,
    Just look at this function module.
    function wbs_assignment_check.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     REFERENCE(I_COMPONENT) LIKE  RESBDGET STRUCTURE  RESBDGET
    *"     REFERENCE(I_PSPEL) LIKE  RESB-PSPEL
    *"     REFERENCE(I_RFPNT) LIKE  AFVC-RFPNT
    *"  EXPORTING
    *"     REFERENCE(E_PSPEL) LIKE  RESB-PSPEL
      e_pspel = i_pspel.
    endfunction.
    hope this helps u
    REWARD IF USEFUL
    thanks and regards
    suma sailaja

Maybe you are looking for