Removing the .local part of my host name.

I can figure out how to remove .local from my servers host name. I am running a simple personal server so I don't have a domain of my own.
It hasn't been an issue, but recently I have started trying to run the SlimDevice Server on my OSX Server.
Anyhelp would be greatly appreciated. I'm hoping I don't have to restart.
-Hays

Not having or creating a DNS presence resorts to the use of .local domains for simplified network discovery. I you do not want to use .local domains, configure DNS on the server. You do not need to use a valid domain unless you are hosting mail (assuming you are not based on description of .local use). Simply create something that will not conflict with existing TLDs such as myserver.int or myserver.osx. Basically you will need to create a zone and an A record (with PTR auto-create checked). Test name and number resolution with nslookup and then configure your server to query itself.
You will likely need to use the changeip command but if your services are few then you can probably ignore the two errors every few minutes in system log.
Hope this helps

Similar Messages

UNABLE TO RETRIEVE THE CLIENT IP ADDRESS AND HOST NAME OF A PORTAL USER

I'm trying to retrive the client IP address and host name of a portal user
trying to access a portal page using APIs:
PortletRenderRequest portletRequest =
(PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
HttpServletRequest servletRequest =
(HttpServletRequest)portletRequest.getAttribute(HttpCommonConstants.SERVLET_REQUEST);
String l_szClientIPAddress = servletRequest.getRemoteAddr();
String l_szClientHost = servletRequest.getRemoteHost();
but i found that for all portal users on different machines IP addresses, the
returned IP is the same for all which is Portal middle tier IP address.
So how can retrive the IP addess of a portal user trying to access a portal
page ?

Brijesh,
Do you mean how to see hostname/ip address of client requests processed by the server? If yes, depending on what's your front ending component - Web Cache or OHS, you can configure the access log format to have this information recorded in either of these component's access log file.
For Web Cache access log file, refer this:
http://download.oracle.com/docs/cd/B14099_19/caching.1012/b14046/diagnostics.htm#sthref2090
For OHS access log file, refer this:
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14007/servlog.htm#sthref439
By default, both Web Cache and OHS are configured to use Common Log Format (CLF) that does record hostname/ip address so if you haven't made any changes to log format, this info is already there for you. Look for $ORACLE_HOME/webcache/logs/access_log file for Web Cache and $ORACLE_HOME/Apache/Apache/logs/access_log file for OHS.
Thanks
Shail

When I try to send an email I get a message - Non ASCII characters in the local part of the recipient address.

I am trying to send an emails to Italy. When I click send I get a message ( Non-ASCII characters in the local part of the recipient address). [email protected] is one of the email address I am trying to send to. My other email address' work OK. I have sent emails to these Italian address before with no problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

What tools and how to remove the local saturation of a video?

Pessoal Bom dia..! Alguém pode me ajudar com essa pergunta?
Personal Good day ... Can anyone meajudar with this question?

Tank you
M@rkony
Em Sábado, 30 de Agosto de 2014 13:43, Ann Bens <[email protected]> escreveu:
What tools and how to remove the local saturation of a video? created by Ann Bens in Premiere Pro - View the full discussion

How to crop a photo to remove the middle part

How do I crop a photo so that I can keep the sides of the photo but remove the middle part.

You do not want to crop. Sound more like you want to cut and paste and move areas.
crop (krp)
n.
1.
a. Cultivated plants or agricultural produce, such as grain, vegetables, or fruit, considered as a group: Wheat is a common crop.
b. The total yield of such produce in a particular season or place: an orchard that produced a huge crop of apples last year.
2. A group, quantity, or supply appearing at one time: a crop of new ideas.
3. A short haircut.
4. An earmark on an animal.
5.
a. A short whip used in horseback riding, with a loop serving as a lash.
b. The stock of a whip.
6. Zoology
a. A pouchlike enlargement of a bird's gullet in which food is partially digested or stored for regurgitation to nestlings.
b. A similar enlargement in the digestive tract of annelids and insects.
v. cropped, crop·ping, crops
v.tr.
1.
a. To cut or bite off the tops or ends of: crop a hedge; sheep cropping grass.
b. To cut (hair, for example) very short.
c. To clip (an animal's ears, for example).
d. To trim (a photograph or picture, for example).
2.
a. To harvest: crop salmon.
b. To cause to grow or yield a crop.
v.intr.
1. To feed on growing grasses and herbage.
2. To plant, grow, or yield a crop.
Phrasal Verb:
crop up
To appear unexpectedly or occasionally: "one of the many theories that keep cropping up in his story" (Christopher Lehmann-Haupt).

Removing the "irj" part

Hi,
We have changed our portal start URL (running SSL) from "https://host.domain.com:50003/irj" to "https://xyz.domain.com/irj", via firewall/certificate/etc. settings and now we want to get rid of the "irj" part in the URL, so the final URL starting the portal should be "https://xyz.domain.com".
We tried to enter "irj" in the "Start Page" parameter for the http service (tab "Runtime") in the J2EE engine admin tool, but this did not help.
Do you have any ideas on how to be able to start the portal without having to enter "irj" at the end of the URL?
Thanks in advance!
David

Hi David,
please check those two threads:
How to map www.webadd.com/irj to www.webadd.com
and
Re: alias in the portal
Best regards,
Robert

My adapter got broken. How do I remove the broken part that is stuck in the AC port?

My laptop is HP Pavilion DV 6700

So the barrel part that plugs in the hole broke off down inside? The only way I know to get that is with very fine needle nose pliers. You have got to get a grip on the edge of the barrel. The ac adapter jack in the laptop can be replaced separate from the motherboard if all else fails.

How to get the information like IP address,Host name of connected clients v

Hi Every one,
I want to get the information like (IP Address,Hostname,Active sessions , Database Server.etc) of the connected clients
via V$Views(ORACLE).
And then I like to load these infromation into a table Client_Table.
Could some one give me suggestion that which V$ views/method I use in order to get the above information and then
how to load these information into a table Client_table?
Your suggestions will be highly appreciated.
With Regards
BILAL

You could use a LOGON TRIGGER so every session insert its own environment into your client_info table.
You could use the following view and choose whatever attribute you need:
create or replace view my_userenv (
AUDITED_CURSORID ,
AUTHENTICATION_DATA ,
AUTHENTICATION_TYPE ,
BG_JOB_ID ,
CLIENT_IDENTIFIER ,
CLIENT_INFO ,
CURRENT_SCHEMA ,
CURRENT_SCHEMAID ,
CURRENT_SQL ,
CURRENT_USER ,
CURRENT_USERID ,
DB_DOMAIN ,
DB_NAME ,
ENTRYID ,
EXTERNAL_NAME ,
FG_JOB_ID ,
GLOBAL_CONTEXT_MEMORY ,
HOST ,
INSTANCE ,
IP_ADDRESS ,
ISDBA ,
LANG ,
LANGUAGE ,
NETWORK_PROTOCOL ,
NLS_CALENDAR ,
NLS_CURRENCY ,
NLS_DATE_FORMAT ,
NLS_DATE_LANGUAGE ,
NLS_SORT ,
NLS_TERRITORY ,
OS_USER ,
PROXY_USER ,
PROXY_USERID ,
SESSION_USER ,
SESSION_USERID ,
SESSIONID ,
TERMINAL
) AS SELECT
SYS_CONTEXT ('USERENV', 'AUDITED_CURSORID') ,
SYS_CONTEXT ('USERENV', 'AUTHENTICATION_DATA') ,
SYS_CONTEXT ('USERENV', 'AUTHENTICATION_TYPE') ,
SYS_CONTEXT ('USERENV', 'BG_JOB_ID') ,
SYS_CONTEXT ('USERENV', 'CLIENT_IDENTIFIER') ,
SYS_CONTEXT ('USERENV', 'CLIENT_INFO') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMA') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SCHEMAID') ,
SYS_CONTEXT ('USERENV', 'CURRENT_SQL') ,
SYS_CONTEXT ('USERENV', 'CURRENT_USER') ,
SYS_CONTEXT ('USERENV', 'CURRENT_USERID') ,
SYS_CONTEXT ('USERENV', 'DB_DOMAIN') ,
SYS_CONTEXT ('USERENV', 'DB_NAME') ,
SYS_CONTEXT ('USERENV', 'ENTRYID') ,
SYS_CONTEXT ('USERENV', 'EXTERNAL_NAME') ,
SYS_CONTEXT ('USERENV', 'FG_JOB_ID') ,
SYS_CONTEXT ('USERENV', 'GLOBAL_CONTEXT_MEMORY') ,
SYS_CONTEXT ('USERENV', 'HOST') ,
SYS_CONTEXT ('USERENV', 'INSTANCE') ,
SYS_CONTEXT ('USERENV', 'IP_ADDRESS') ,
SYS_CONTEXT ('USERENV', 'ISDBA') ,
SYS_CONTEXT ('USERENV', 'LANG') ,
SYS_CONTEXT ('USERENV', 'LANGUAGE') ,
SYS_CONTEXT ('USERENV', 'NETWORK_PROTOCOL') ,
SYS_CONTEXT ('USERENV', 'NLS_CALENDAR') ,
SYS_CONTEXT ('USERENV', 'NLS_CURRENCY') ,
SYS_CONTEXT ('USERENV', 'NLS_DATE_FORMAT') ,
SYS_CONTEXT ('USERENV', 'NLS_DATE_LANGUAGE') ,
SYS_CONTEXT ('USERENV', 'NLS_SORT') ,
SYS_CONTEXT ('USERENV', 'NLS_TERRITORY') ,
SYS_CONTEXT ('USERENV', 'OS_USER') ,
SYS_CONTEXT ('USERENV', 'PROXY_USER') ,
SYS_CONTEXT ('USERENV', 'PROXY_USERID') ,
SYS_CONTEXT ('USERENV', 'SESSION_USER') ,
SYS_CONTEXT ('USERENV', 'SESSION_USERID') ,
SYS_CONTEXT ('USERENV', 'SESSIONID') ,
SYS_CONTEXT ('USERENV', 'TERMINAL')
from dual;

Can I remove the Faces part of iPhoto in Lion 10.7.2?

I have been transfering phots using DVD disks to a new iMac.
Regrettably there are some 22,000 photos and the iMac has made 1000s of individual faces that I do not want.
Can I remove or block Faces from creating faces?
Many thanks.

Thanks very much for your reply and the link.
If I understand the link correctly it is telling me to get my corkboard on the screen. This shows 5 faces in line.
Then to highlight a face - a small circled x appears in the top LH corner.
Then press together Command and delete.
Sadly nothing happens!
More advice would be greatly appreciated!?
Many thanks

Local DNS setup (sync host names with router?)

I'm setting up dns on a mac mini running lion server. My goal is to be able to ping host.domain both in my home, and remotely via vpn. I could enter each record manually, but I'd like to have each hostname added automatically (I want to be able to ping machines that are joined to my network by host.domain.)
I found that if I host DHCP on the server, then I am able to achieve my goal. However, I'd like to avoid losing DHCP services in the event of a server outage. Is it possible to have dhcp hosted on the router, dns on the server, and have my dns wishes fulfilled?

If I understand your requirement properly then the answer is yes. However if your server has an outage then even though your DHCP will continue to work via the router, your DNS server and hence DNS lookups would not meaning that pinging host.domain would fail, on top of that a server outage would mean your VPN server would also potentially be affected although in that case some routers can act as a VPN server as well.

Viewing and Removing the Time part of the Date field

Hi,
I have Date field in a table.
but in SQL plus when I do
select date from table
this gives me only the Date values and not the timestamps in the date.
I believe Oracle stores 'Date' and 'Time' in fields with Data Type 'Date'.
How do I print the timestamps also in the SQL query?
Moreover, if I have to extract the date field, reset the timestamp to 00:00:00, and store back the date field (with 00 time), how do I do that?
Thanks in advance
- Manu

Hi,
If you want to retry date and time you can:
SELECT TO_CHAR(DATE,'YYYY/MM/DD HH24:MI:SS') FROM TABLE;
If you want truncate time when inserting in a table simply use TRUNC function
INSERT INTO TABLE (DATE) VALUES (TRUNC(YOUR_DATE));
To extract and insert with time 00:00:00
INSERT INTO TABLE1 (SELECT TRUNC(DATE) FROM TABLE2);
I hope this help you.

I get "there are non ASCII characters in the local part of the recipient's address" when trying to send emails as BCC. email addresses are all good!

I used to send out christmas greetings from my biz to groups of 20 customers, in BCC format. all addresses are good, but the emails don't get sent now because of the supposed ASCII problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

How do you organize multiple mailboxes for each accepted domain with the same local part?

Let's say we are aceppting emails for the two domains wine-and-cheese.com and beer-and-pretzels.com.
I plan to create two mailboxes [email protected] and [email protected]
By default, the local part of the SMTP address uses the alias, which is the same as the sAMAccountName. Since I cannot have two AD users with the same sAMAccountName, I choose to name them "info-wine" and "info-beer". The result is, that
I have two mailboxes with the address [email protected] and [email protected], respectively.
One thing I could think of would be to manually add [email protected] and [email protected] to the corresponding mailboxes. I prefer to avoid anything that has to be done manually.
Another idea, that involves manual editing is, to change the aliases of both mailboxes to "info", but that results in having the second mailbox create the SMTP address info2@….
I am very interested how you handle those situations, particularly in bigger companies with more than 50 employees and 75 mailboxes.

Hi ,
Alright , based on my knowledge i have given some points please have a look in to this.
Step 1 :
Please create the first user account on AD in the below format.
info as the first name in AD
wine as the last name in AD
Then please create the second user account on the AD in the below format.
info as the first name in AD
beer as the last name in AD
Step 2 :
Then you need to have the email address policy with the custom type attribute which should apply the email address based upon the first name.So that all the email address will have the first name (i.e ) "info" on the prefix.
Custom type attribute should have to be like
%[email protected]
%[email protected]
%[email protected]
%[email protected]
Note : The custom type attribute which is created first will be the primary address for all those mailboxes.In the above example
@wine.com will be the primary smtp address for those mailboxes .In case if you want some set of mailboxes need to have the suffix @wine.com as the primary smtp address and some set of mailboxes to have the suffix @beer.com as the primary smtp
address then you need to create the separate email address policy with rules.
Reference Link :
https://technet.microsoft.com/en-us/library/bb232171(v=exchg.150).aspx
Please reply me if you have any queries.
Thanks & Regards S.Nithyanandham

HT201320 what is the incoming mail server host name and user names

Hi there,
I am trying to add my school email account to my phone and I am able to fill in the
Name
Email
and Description
but am not sure what I am supposed to fill out in the Incoming Mail Server spots:
Host Name
User Name
and the password is already filled in?
and Im not sure what the Outgoing Mail Server is either.

You'll have to ask someone at your school what the incoming server settings are for their email. These differ for every email provider/account.

My computer looks alone on the local network

Hello,
Since a few days, I can't see any computer in the "Shared" section of the Finder's side bar.
Digging into that problem, I noticed I can no more connect to any of the local network computers using their name (i.e.: afp://mycomputer.local) but can well using the IP address (i.e.: afp://192.18.1.10).
Access to outside world causes no problem.
Any idea on how to solve this is welcome !
Regards,
Lionel

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' ' {/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' ' -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist ' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf " list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Removing the .local part of my host name.

Similar Messages

Maybe you are looking for