Removing unused IDOC fields

Hi All ,
Removing unused IDOC fields using an XSLT editor is possible? If so, we can import them the IDOC as XSD correct? What will be the immediate benefit of such a tweak?
Thanks
XA

Hi,
When the Idoc definition itself is huge enough to cause the XI message mapping
editor to consume a lot of memory and at times even end up giving an Out of Memory error, only while displaying
the mapping. SAP recommends that a Reduced XSD feature provided by the Integration repository should be
used in place of actual Idoc structure to avoid memory issues.
If it is imported as an IDoc and used thereafter directly in mapping still results into an XSD of
around more than 3 MB and causes trouble during opening of the mapping and also gives errors during mapping
edit leaving the work in a vulnerable state.
To overcome issues in the design editor to a considerable extent by using Reduced XSDs.
you can find more details in Note # 709400.
Regards,
Harish

Similar Messages

How to map empty IDoc field

Hi everybody!
I want to map the value of a source field through a FixValues function to the target field. Unfortunately this is an IDoc field which sometimes doesn't even exist (i. e. it's not just empty - it's not even there). In this case the FixValues function suppresses the output, and there is no output - not even the default value of FixValues. However, the requirement is that I always have to generate a default output - even if the input field is empty/missing.
Ony ideas how this could be done?
Regards, Joerg

Hi Himadri!
Thanks for the quick response! I tried to create such a que. However, it doesn't remove the SUPPRESS from the queue. Here's the code:
// Two input params: src[] and def[]
// src contains the input queue (with SUPPRESS values)
// dst contains (hopefully) only one value - the default value
int n=src.length;
result.clear();
if (n==0) {
result.addValue(def[0]);
else {
for (int i=0; i<n; i++) {
 if (src.equals(ResultList.SUPPRESS)) {
 result.addValue(def[0]);
 else {
 result.addValue(src);
What am I doing wrong?
Regards, Joerg

Acrobat 9.0 freezes while "Removing unused objects"

I am using Acrobat Pro 9.0 in a Windows 8.1 environment. When I attempt to convert a PDF I created to a Form the program freezes once I click SAVE and "Removing unused objects" appears. I have "repaired" and "reinstalled" the application but the problem persists.

Hi Mike,
I do have some startup items;
EyeTV Helper
AdobeResourcesSynchroni
I Love Stars
GrowlHelperApp
NikePlusUtil
EEvent Manager
EPSON Scanner Monitor
I don't have any haxies on anything.
I made a new user account and tried to replicate the problem but it seems to work fine when logged in as a different user which leads me to think it is a preference in my current user>library
Ross

Are idoc fields case sensitive?

Hello, there has been an error during idoc processing. The trading partner field was filled in lowercase and this is bringing me error Message no. FB279 ' Company dp0017 is not defined'. The other idocs had DP0017 filled in and were processed fine.
Any input on this? thx.
Edited by: Antish Awootar on Jun 7, 2011 8:02 AM

Hi Antish,
It actually depends on the value that is stored in the IDOC, if the IDOC has company code in lower case then that is exactly how it will be used in the program for all purpose and no automatic conversion is applied. The below message is thrown in the FM - FI_COMPANY_CHECK This FM will look up the table T880 - If you check the entry in this table will be DP0017 and not dp0017. Hence it is throwing the error message.
If your question is it works fine when i try in SE37 with the FM "FI_COMPANY_CHECK" or if i input "dp0017" in WE19 or in SE11 against T880, then the reason for that is a conversion is applied automatically and it is changed to DP0017.
To answer your question "Are idoc fields case sensitive?", it depends on the context, does it retain the case when it is filled in, yes it does.
Regards,
Chen
Edited by: Chen K V on Jun 7, 2011 4:10 PM

Acrobat 6 - Save As - Removing Unused Objects

When using the "Save As" feature to save from a mapped network drive to the personal drive, documents that are created from a scanned image take a long time to save, and on the progress bar show the message "Removing Unused Objects". My client is using Acrobat Standard 6, and I am unable to find any type of "PDF Optimizer" as the later versions have. Is there any way to remove this background processing that Adobe is doing and speed up the network saving?
Thanks,
edgetech1

Is there anyone out there who can offer some insight into this?

How to collapse unused text field in PDF form

Hi all, may i know how to collapse unused text field in a PDF form. Etc, we have alot of description line for user to enter the info, but some line will be left unused, so i was wondering whether can i hide those unused text field. But when i need them, i just expand it and use it.

I don't think w/o UI Customization it is possible.
UI customization won't be a small one as it is a common wizard and used at multiple places. So it will be a huge work.

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

Any method to remove the required field option in the runtime process

I've added the required actions n callable objects for the design time and when i run it in the runtime, there are actually required field that we need to fill in before the interactive form appear. Is there any way that I can remove the required field and fill in the interactive form?
Can anyone help me answer my qn?
Thanks.

Just access the total textfield and make it visible = false;
oForm.Items.Item("29").Visible = false; //The field
oForm.Items.Item("30").Visible = false; //The label
If that doesn't work try setting the left property to something that will never come into view no matter how large you make the window... Something like this
oForm.Items.Item("29").Left = 5000; //The field
oForm.Items.Item("30").Visible = 5000; //The label

To Handle Special Characters(Guideu0099 ) in MATMAS IDOC fields

Need to handle special characters like Guide, as an attached superscript in MATMAS02/05 IDOC field . The field name is TDLINE in E1MTXLM segment.
As a trial run when these special characters are pasted in the TDLINE field, it throws an error that "the input field contains prohibited characters"
Please let me know if there is any workaround for this.

hi
good
go through these links, i hope these ll help you to solve your problem.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMLO/CAGTFADMLO.pdf
http://www.erphome.net/wdb/upload/forum14_f_2908.doc
thanks
mrutyun^

How to remove User Defined field in programitically

Hi,
How to remove user defined field in programitically. send the code
Thanks,
P.Suresh Kumar

Hi,
Please take a look at this thread:
Re: Can't remove a user defined field with DI API.
Kind Regards,
Owen

Trim Whitespace.vi - remove unused polymorphic VI instances

Hello All
From some time while building the exe file I have started to receive the error:
Error 1073 occurred at E:\Program Files\National Instruments\LabVIEW 7.1\vi.lib\Utility\error.llb\Trim Whitespace.vi
Possible reason(s):
Application Builder: Unable to disconnect type definitions and remove unused polymorphic VI instances for this application. Deselect this option on the Application Settings tab and build the application again.
It did not happen before. Of course I can leave all polymorphic vis in my application, but why I started to get this error? It never happened before. Especially that the Trim Whitespace.vi is not a polymirfic vi.
Any ideas?
thanks in advance.
Pawel

Hi Mohadjer
Demn.... I remember now. I started to get this error when I saved my vi (for other purposes) with removed diagrams. Probably it removed it also from the vi.lib vis. Wow.... Now I am having problems, how many vis I have destroyed when this happened.
Anyways, thanks a lot for this. At least I know what I have done .
regards
Pawel

IDoc fields, when empty

Hi all,
I have a requirement to send IDoc to external system. When there is no corresponding data, IDoc fields are not filling.
I need to fill blant value to the IDoc fields and send to external system.
I don't have permissions to change the standard code.
My doubt is: Can I fill the empty field in conversions or in any other place, other than coding? is BD64 useful to fill the IDoc field?
Thanks in Adv,
Moderator message - Duplicate post locked
Edited by: Rob Burbank on Dec 9, 2009 9:51 AM

Hi Kanagaraja,
I am sending the IDoc to PI system using ALE. The IDoc is CLFMAS. when ever a Material Master IDoc generated, subsequent CLFMAS will be generated. The IDoc filling logic is actually in Master_IDoc_MATMAS FM. I think I don't have permissions to change the coding, since its a standard IDoc and some other systems also using the same IDoc generation logic.

[svn:fx-trunk] 15795: Initial check-in for removing unused rsls and the include-inheritance-dependencies-only features .

Revision: 15795
Revision: 15795
Author:   [email protected]
Date:     2010-04-28 14:01:58 -0700 (Wed, 28 Apr 2010)
Log Message:
Initial check-in for removing unused rsls and the include-inheritance-dependencies-only features.
Changes to implement ?\226?\128?\147remove-unused-rsls feature. When the configuration option is true, RSLs associated with RSLs that are not used by the application are not loaded at runtime. The compiler logs the primary RSLs that are required with the number of failovers, if any.
compiler/src/java/flex2/compiler/common/Configuration.java
            add ?\226?\128?\147remove-unused-rsls and ?\226?\128?\147include-inheritance-dependencies-only.
compiler/src/java/flex2/compiler/CompilerSwcContext.java
            pass rslGroup to getSwcGroup.
compiler/src/java/flex2/compiler/swc/SwcCache.java
            Add parameter to getSwcGroup to a group of rsls can be passed in.
compiler/src/java/flex2/compiler/swc/SwcGroup.java
            Add a SwcGroup constructor that accepts a SwcGroup of Rsls. Use the RSLs to give preference to scripts that come from RSLs when duplicate scripts are merged.
compiler/src/java/flex2/tools/CompcPreLink.java
compiler/src/java/flex2/tools/PreLink.java
            Find the set of SWCs that are contributing code to the application. Use this set to restrict which RSLs are written to the generated root class. Log the RSLs that are required to give the user some feedback.
compiler/src/java/flex2/tools_en.properties

Ah, ok. I was in the assumption the PCI connect had something to do with the video connection. But it seems like Apple wanted to reinvented PCIe...
I'm out of my territory here so feel free to ignore the following.
These are the things I notice in your Xorg.0.log:
[ 19.474] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 19.474] (==) modesetting(G0): RGB weight 888
[ 19.474] (==) modesetting(G0): Default visual is TrueColor
[ 19.474] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 19.500] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 19.526] (II) modesetting(G0): EDID for output VGA-1-0
[ 19.526] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.526] (==) modesetting(G0): DPI set to (96, 96)
What the hell is modesetting doing there?
And have you tried the nvidia blob? It could be that this is not well supported by nouveau. Maybe check up with their IRC / mailing list.

Mapping the IDOC fields for Inbound PO

Hi,
I am trying to map the fields for PO for IDOC type ORDER05, but unable to do so for the following IDOC fields in segments.
Document Date
Vendor
Account Assignment Category
Delivery Date
Requirement No.
Requisitioner
Purchase Requisition
Preq Item No.
Outline Agreement
Outline Agreement No.
What fields in the IDOC match these in SAP R/3.
Thanks,
Randy.

Hi Did you manage to get this IDoc working? I'm having the same problem with the mapping and the documentation is really bad.
Thanks.

Missing IDOC field in XML after IDOC reimported in ESR

Hi Guys,
I have just reimported my IDOC in ESR wherein an additional field is added.
However, when I test a message, the IDOC field is missing in the XML payload upon entering PI even though I have entered a value in the IDOC.
Flow:
SAP ECC > PI
I have also already updated my message mapping. I'm not sure if I have missed any steps after importing the IDOC in ESR.
Could you please help me on this issue?
I'm using ICO by the way.
Thanks and Regards,
Neil

Hi Neil,
As Shanthi said you need to update metadata but since you are using ICO you need to do it in NWA.
NWA->SOA->Monitoring->IDOC Adapter Monitoring
Regards,
Praveen.

Removing unused IDOC fields

Similar Messages

Maybe you are looking for