Renaming Scanned Photos

I have been scanning photos in and attempting to rename them so that I can put them on a digital frame, but each time I rename the photo in the finder I can no longer enlarge it in iPhoto and see it. All I see is a black screen with an exclamation point. Does anyone know what I am doing wrong and how do I go about renaming these scanned photos so that I can move them onto this digital frame. I have been trying to do this for a week now and I am getting very frustrated that I can not figure this out. HELP PLEASE!!!

Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
iPhoto tracks the file on your computer by the path to it - that is, it's "address" on the HD. Change that address and you have the problem.
Bluntly, you cannot rename a file in iPhoto.
You can add a title to a Photo (Check out the Info button, lower left) and then, export the photo from iPhoto using the File -> Export option. In that dialogue you have the ability to use the Title as a filename on the exported photo.
Now that you have damaged your Library you have the following options:
1. Change the names on these files back to whatever they were exactly
2. Restore from a known-good back up.
3. Create a new Library and start over
Regards
TD

Similar Messages

  • Importing scanned photos from DVD

    I just downloaded PSE 9 and I'm trying to import three dvd's of scanned photos.  PSE 9  fails to import the 2nd and 3rd dvd's becasue the photo ID is the same on disc 2 and 3 (each photo is just sequentially numbers 1,2,3,etc.)  Can someone please tell me how to import the 2nd and 3rd dvd's.  They are read only and I can rename the files and really would not want to because there are over 400.  Please help, thanks!

    You can also batch rename with Irfanview
    www.irfanview.com   -   free!

  • PE7: Problem with auto file naming of scanned photos

    I began scanning photos using PE7. PE stored the files in my designated folder. It named the first scan "Image1.jpg." Thereafter, files were named "Image1-nn.jpg." I would finish for the day, and PE would pick up where in left off in file naming for the next batch.
    All was well until I got the bright idea to rename the first photo to "Image1-0.jpg," so it would sort properly. Worse, perhaps, I renamed it outside of PE, in Windows Explorer. Unfortunately, this confused PE completely. Now, it wants to restart the file naming with "Image1.jpg," and scans terminate with a message that the scan was unsuccessful because there is already a file with that name in the catalog.
    How do I go about resetting things back, so that subsequent scans resume at the next available file name+number?
    Second, is there a way to control what prefix ("Image1") gets inserted in scanned file names?
    Thanks.

    By renaming the file outside of PSE, it's now "missing" in your PSE catalog and PSE doesn't know how to find it -- its thumbnail should have a yellow question mark on it.   Do File > Reconnect > All Missing to reconnect any missing files with their new locations, and going forward, only rename and move files in the catalog using PSE.
    Once you've reconnected the missing files, the scanning should no longer be confused about file names.
    I don't think you can control the filenames used by the scanning.  You can set the folder used via Edit > Preferences > Scanning.   For a number of reasons, I do scanning in two steps -- first, I use the scanner's utility to scan to a file, then I drag the file into the Organizer.  This gives me fine control over the file's name and folder location.

  • Facial Recognition with scanned photos - Elements Organizer 11

    My facial recognition works fine with my digital photos but not my scanned photos. It used to work a couple of weeks ago but the power was turned off and my computer was turned on at the time. Im not sure if that has anything to do with it but thought Id throw it out there. I am running the program on my mac.
    Thanks for any help you can give me!

    Please try renaming last files mentioned in hierarcy:
    C:\Users\suresing.ADOBENET\AppData\Roaming\Adobe\Elements Organizer\11.0\Organizer\psa.prf
    peoplestatus.dat file present in your catalog folder (location can be found from Help->System Info)
    and click on 'add people' button.
    ~Andromeda

  • Scanned Photo filenames

    I have briefly used 3 versions of Photo Elements (9, 10 and11) and have experienced the same problem in all 3. Scanned images are labeled Image1.jpg, Image2-###.jpg, Image3-###.jpg and Image4-###.jpg. As you noticed, the first scanned image is ALWAYS NAMED IMAGE1.jpg.
    Because this is happening on every scan, Elements is giving me the message that the first scanned image in each subsequent scan is already in the catalog (as Image1.jpg). All the remaining images in the scan are sequenced without any problem.
    It appears as though Elements places all scanned photos into a temp location under AppData and then enters them into the catalog after the scan is complete. The file names in this temp folder are Image1, Image2, Image3, Image4. Image2-4 have their filenames changed, but Image1 doesn't.
    The easiest way I have found to fix this is to rename Image1.jpg after each scan. I have looked around Elements and have no user available procedures to fix this.
    I am using an Epson Perfection V600 Photo scanner with Epson Scan software  3.83.
    I am running Elements 11.
    Any ideas???

    Thanks hatstead.
    Your solution is something I have tried. The only problem is that I would have to name or rename 4 files instead of 1 and I have to launch my scanner program outside of Elements. I should not have to do that with any of the Elements packages. That is extra work that I would like to avoid. The naming worked briefly with version 10. Something happened as I continued to load images.
    Thank you for your input.

  • Trying to scan photos from my photo album to a folder on my desktop.  Have been trying to figure out for over an hour.  Seems very complicated and cumbersome,  Can you help?

    Trying to scan photos from my photo album to a folder on my desktop.  Have been trying to figure out for hours.  Seems very complicated and cumbersome.  Can anyone help?  It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.

    Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
    http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
    http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
    http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
    http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
    http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
    If this post answered your question or helped, please mark it as such.

  • My HP Photosmart 5510 won't scan photos to file on my Mac running Yosemite

    I keep getting an error message that the scan failed every time I try to scan a photo.  I've downloaded the latest driver via the Apple App Store.  I've restarted both computer and printer.  Help!
    This question was solved.
    View Solution.

    Hi @JaneCat,
    Welcome to the HP Forums!
    I understand that you cannot scan photos from your HP Photosmart 5510 to a file on your Mac running Yosemite. I am sorry to hear this, but I am happy to help!
    I would recommend downloading the full feature software and drivers from our website, HP Photosmart 5510 e-All-in-One Printer Full Feature Software and Drivers, as it is compatible with Mac OS X Yosemite.
    If you are still having issues, I would also recommend this scanning guide, A 'No computer found' Message Displays during Scanning. Then follow the steps for the section that says it is for, Mac OS X v10.6 Snow Leopard, OS X v10.7 Lion, OS X v10.8 Mountain Lion, or OS X v10.9 Mavericks. As these steps will still work on Mac OS X Yosemite.
    I would also see this how to scan guide, Scanning with the Full Feature HP Software in OS X v10.10 Yosemite.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Is there a way to rename all photos in a folder?

    Is there a fast way to rename all the photos in one folder e.g. I have diffreent folders say "wedding" and "birthday" with alot of photos in each. Is there a way to rename all photos in the folder to the same name like all called wedding?
    Also when i open photos they automatically open with preview, do I need to impost them into iPhoto or should they just automatically save there?
    Tracy

    Tracy
    Are these photos in iPhoto? If so, then use the Photos -> Batch Change command.
    IF not then you can use a batch file renamer such as Name Mangler
    iPhoto is a database and can only show pics that have been imported to the DB.
    Regards
    TD

  • How do I RENAME a photo once it is in iPhoto?

    I have put a bunch of photos into iPhoto and assigned various keywords to them. Now I need to rename a few of the photos, but I can't figure out how to do that. You would think you could just click on the name in the library image and retype a new name, but that doesn't wok. I tried "Get Info" under the "Photos" tab, and that doesn't work either.
    There MUST be a way to rename a photo; I just can't find it. Please help! I don't want to re-enter pictures whenever I need to rename them!
    Please E-MAIL if you have an answer, if you could. Thanks!
    PowerBook G4   Mac OS X (10.4.6)  

    You can export the files, by roll, album or whatever grouping you'd like and use the "Use Title" option in the Export window to produce files with the Title as the file name. However, when you reimport those files you will lose any keywords added to them and the roll date will probably be changed to the date you reimported them. That can be changed however.
    There is a way to keep the keywords. See Tutorial #1. Do that before you do your exporting and when you reimport the keywords will come back.

  • How do I rename a photo in the iphoto folder?

    OK, so I know that you can change the name of a photo while in iphoto by simply pressing the "i" button at the bottom left, but that doesn't change the actual name of the file.
    And I know that I can do that by going to Share-Export-Use Title and then put it in the same file that the original picture is in.
    My question is....if you do that, then you have two of the same pictures in the same folder (one with the name you gave it and one with a name the computer gave it...some IMG_0812.JPG name), so after I've done this, can I delete the original picture with the numbered name so that I only have the picture with the name I gave it to reduce clutter?
    Anyone? Anyone? I ask this question because I'm an organized freak and hate when I need to go and attach a photo I need to know when I took the photo (the month and date) and then all I see are numbers for the names.

    Welcome to the Apple Discussions.
    How do I rename a photo in the iphoto folder?
    You don't.
    And I know that I can do that by going to Share-Export-Use Title and then put it in the same file that the original picture is in.
    That depends on how you "put" the renamed export into the "same file." You can Import it into your iPhoto library. If you use the Finder or a Save dialog to save directly into the iPhoto Library folder then this photo will not be recognized by the database.
    ...can I delete the original picture with the numbered name so that I only have the picture with the name I gave it to reduce clutter?
    If you imported the renamed Export properly, and now see both versions of the photo in the library (within the iPhoto application), then yes, you can place the first version in the iPhoto Trash, then Empty iPhoto Trash. Absolutely do not do any of this from within the Finder.
    I'm an organized freak and hate when I need to go and attach a photo I need to know when I took the photo (the month and date) and then all I see are numbers for the names.
    Don't root around inside the iPhoto Library folder to find your photos for attachments or uploading.
    Why: iPhoto is a database application, not a file browser. You aren't supposed to go inside the iPhoto Library folder at all. See this from the iPhoto Help, under "About using the iPhoto Library":
    "IMPORTANT: There is also an "iPhoto Library" folder located in the Pictures folder in your home folder, outside the iPhoto application. If you move, delete, rename, or otherwise touch files or folders within this folder, you may be unable to see your pictures in the iPhoto application.
    "The files within this folder should only be manipulated by a customer care representative."
    To access your photos, use iPhoto. They are perfectly organized and easy to find, with all of iPhoto's tools at your service. No need to remember the date you took the picture. When you need to upload or attach your photos, select them in iPhoto and do a Share > Export to a Desktop folder. Attach or upload from that folder, then trash it when you are finished.
    If you absolutely want to rename your photos it's best to do this before importing into iPhoto. You can use Image Capture (look in your Applications folder) to upload from your camera to a Desktop folder. Use the Finder to preview and rename the files to your liking. Name the folder the way you want the Film Roll to be named in iPhoto. Import the folder into iPhoto, and then delete the one on your Desktop.
    But do learn to keep out of the iPhoto Library folder when you are in the Finder. Tampering inside that folder causes much of the damage that I see people coming here to try to repair. Once your photos are inside the iPhoto library, it's best to use iPhoto to do what you want with them.
    Regards.

  • Can't Import Scanned Photos

    I have scanned about 100 snap shots from the original photo prints. All are saved in .JPG format. When I try to drag these photos to my iPhoto library, a message appears advising that the files are unreadable (may be unrecognized file type or may not contain valid data).
    I'm puzzled. As I said, I saved them as jpeg files ...
    Thanks for any help.
    G5 iMac Rev B, 2Gb RAM, 400 Gb HD, iPod 20 Gb   Mac OS X (10.4.3)  

    I know it can be confusing working with a new operating system so don't be frustrated. iPhoto works a little differently than what you are used to. Photos must be imported into iPhoto in order for iPhoto to see them. That is why when you scan photos and save them in the iPhoto Library folder they do not show up in iPhoto. The photos must be scanned and saved to a folder OTHER than the iPhoto Library folder. Once saved, they then can be dragged into an open iPhoto Library viewing window (iPhoto is open and you are viewing your photos in the library window) to import, or use the menu command of File>add to library from the menu bar. Once imported/copied into iPhoto you can then delete the scanned photos from the folder you saved them too.
    Now, I am wondering how you chose that folder path to save the scanned photos too? Did you navigate to the Pictures/iPhoto Library/Originals/2007/roll110 folder and choose that folder to save them too?
    Anyway, navigate back to that folder and drag the scanned photos to the desktop. Open iPhoto and import the photos on the desktop.
    Since you are new to the Mac and iPhoto I have a little more info to help you out with iPhoto.
    --First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
    If you have already put files/folders in the iPhoto Library folder in the Finder then you will also find out that if you try to import them into iPhoto you will get an error message. No worry, just drag them to the desktop and import from there.
    --All images that you import are shown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database (the iPhoto Library folder in the Finder) and your hard drive ONLY after you empty iPhoto's trash. (unless you have it backed up somewhere else)
    --You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder. You can also drag a folder of photos into an empty space in the source column and a new roll and album will be created at the smae time for those images in the folder. The album will have the same name as the folder you dragged into the source column.
    -- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
    You want all your photos in iPhoto so you import them into iPhoto.
    Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
    -- You download pictures from your camera into iPhoto.
    There is now one copy of each of the pictures. (DO NOT HAVE IPHOTO DELETE THE IMAGES FROM YOUR CAMERA! DELETE THEM MANUALLY WITH THE CAMERA-if something goes wrong with the import and they are never imported and then they are deleted from the camera you might end up losing those images)
    --You want to change something about a picture you imported, such as
    cropping it or changing the size, or changing the orientation.
    Once you do that to a picture, you now have two copies of the picture
    in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
    (a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
    --You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
    You can open up prefs for iPhoto and choose
    For iPhoto 5--"when double clicking on
    photo" ..do" choose "other" and select Photoshop. Now you can edit all
    pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
    For iPhoto 6 (from the Apple Help Menu)-Have you ever used PS as the external editor set up within iPhoto Prefs?
    From the iPhoto Help menu;
    "Choosing what happens when you click the Edit button
    When you want to edit a photo, you can have the photo open in iPhoto's edit view, in a separate window, in full-screen view, or in another application.
    To choose a preference:
    Choose iPhoto > Preferences.
    Click General at the top of the Preferences window.
    Under Edit Photo, select one of the following options:
    "In main window" opens the photo in the main viewing area.
    "In separate window" opens the photo in a separate window.
    "Using full screen" opens the photo in full-screen view.
    "In application" opens the photo in another application you choose.
    To open a photo in its own window when "Main window" is selected, press the Option key when double-clicking the photo.
    To open a photo in edit view when "Separate window" is selected, press the Option key when double-clicking the photo.
    Note: Any video clip you imported into iPhoto will always open in QuickTime Player when you double-click it."
    And...
    "Editing photos in another application
    You can do many editing tasks in iPhoto, such as rotating and cropping a photo, changing a color photo to black and white, adjusting exposure and contrast, and reducing red-eye. If you want to make other changes to a photo, you can open it in another image-editing application, such as Adobe Photoshop.
    To edit photos in another application:
    Set your preferences to open photos in another application when you double-click them or click the Edit button. (See Related Topics below.)
    Double-click the photo to open it in the application.
    Edit the photo and save it using the same name and file format.
    The changes you made to the photo will be visible when you return to iPhoto.
    IMPORTANT: When you double-click a RAW-format photo, iPhoto creates a copy of the photo in JPEG format, which opens in the other application. To edit the photo in its original RAW format, drag the photo from the iPhoto window to the Finder, and then use the other application to open it. (If you previously used iPhoto to edit the RAW photo, select the photo and choose Photos > Revert to Original before dragging it to the Finder. This way, you can edit the photo using its RAW data in the other application.) If you want to import the photo back into iPhoto, you must first save it as a JPEG or TIFF file."
    --Or, with iPhoto open, you can drag a picture from the library window
    to your desktop (you see a + sign on the pic you are dragging). You now
    have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
    --Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
    picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
    I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
    -The one option you will not find within iPhoto is to resize photos. iPhoto wants you to keep all full size images within iPhoto to give you the best size for printing or using for other applications. You can however go to Share>export (for iPhoto 5) or File>export (for iPhoto 6) and choose the naming scheme, input the dimensions and export to the desktop to use for uploading to a web space or emailing.
    --to email a photo set up your email client in iPhoto Preferences. Once done, just select a photo/photos and hit the email icon in the toolbar.
    If you use a web based email, then you need to export the photo to the desktop and upload it from there.
    Two Apple kbs for you to read
    Don't tamper with files in the iPhoto library folder
    About the iPhoto Library folder
    Don't forget that in Library view you can Control click on any picture and get a contextual menu with many options. One is to revert to original.
    For more help and information you can go to the Help menu wiithin iPhoto and input your search term in the search bar, then hit the "enter" key on the keyboard.
    You can also go to the iPhoto Support site.
    iPhoto Support

  • Create a dvd from scan photos on iMac

    Is it possible to create a movie on (DVD) from scan photos? And will it be compatible to play on a PC?

    You can create an automatically advancing, with some fading and sliding effects, slideshow of your scanned Photos in the app "iPhoto" on a DVD on your iMac.

  • I am using adobe photoshop elements 10.  my scanned photos. It scans the photo but an error  message comes up that says Nothing was imported because this picture already exist. However these are pics I have  never scanned before. Please--I have way too ma

    Adobe elements 10 Photoshop will not import my scanned photos.. I keep getting an error message that says the photo already exist. But I know that these photos have not been scanned in the past. They are not in my library.  The person in chat says I should come here to the forum and my question will be answered. 

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto

    I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.

    What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
    Regards
    TD

  • How do i enlarge a scanned photo in my f4100 series

    how do i enlarge a scanned photo in my f4100 series

    To scan to a computer
    1. Place your original with the side you want to copy or scan face down on the left front
    corner of the glass.
    TIP: For quality copies, ensure that the scanner glass is clean and that there are
    no foreign materials adhering to it. For more information, see Clean the glass.
    2. Press Scan.
    If the original is a document, the HP All-in-One scans it automatically. If the original
    is a photo, a preview image of the scan appears on your computer, where you can
    edit it. Any edits that you make apply to the current scan session only.
    The HP Photosmart Software has many tools that you can use to edit your scanned
    image. You can improve the overall image quality by adjusting the brightness,
    sharpness, color tone, or saturation. You can also crop, rotate, or resize the image.
    3. Make any edits to the preview image, and then click Accept when you are finished.
    You can use the tools in the HP Scanning software to modify a preview image. Any
    changes that you make, such as brightness, image type, resolution, and more apply only
    to this scan session.
    You can make additional changes in the HP Photosmart software after the image is
    scanned.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for

  • Removing Album Art From Zen V P

    This being my first portable media player I've been experimenting. I managed to add some album art for one album via Creative Media Explorer. I think the full screen picture is good but I don't like the miniature picture which seems the default on th

  • Replace function on ejb ql

    Is there a replace function on EJB QL?! I looked for, but I didn't find.... I've got a table with a field 'field' that have some values like 'a.b.c', and I want to create a query that return this register if the user inform 'abc', like: select * from

  • Is it possible to pass a javabean as an href parameter

    Hi I have a JSP where I receive a javabean in the request scope. Is it possible to create a html link passing the object as a parameter to another jsp Pls advise TIA

  • Change custom duty

    Hi, How come system is not allow to change custom duty eventhough GR has been reverse because the field is grey off. But able to change if ONLY IR exist. Thank you.

  • V3 slide show loses it's navigation

    I'm finding that the full screen slide show loses it's navigation, and skips to different pictures at random. This worked rock solid in V2. Do I need to re-install?