Renaming the Custom tab name incorporated by  EEWB

Dear All
    How to rename the Custom tab name incorporated by EEWB in a txn ?
    Please guide me .
Thanks
Moni

Hi Monirujjaman,
As far as I know you can not rename the custom tab once you have created it using EEWB. Alternatively, you can do one thing. Copy all the code written for the enhancement somewhere. Run the wizard again, it asks you for the Extension Title. Give the required title and specify the fields that you want. In effect you will have to create the project again.
After creating the project, paste the code again at the desired place.
<b>Reward points if it helps.</b>

Similar Messages

  • How to display success message when data is changed in the custom tab in MM

    Hi,
    I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
    But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
    Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
    Thanks in advance,
    sudhanva

    Hi Sudhanva,
    The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
    But the message issued by SAP is not related to this Function Exit.
    If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will  not issue the message.
    In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
    I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
    Hope this helps.
    Regards,
    Abhisek.

  • How to change or rename the logical system name T90CLNT090 IN BI 7

    HI Expert's,
    i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
    in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
    In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
    because of this i am not able to create the source system between r/3 also.
    so how to change this source system name for T90CLNT090.
    regards
    harikrishna N

    Hi,
    Pls follow this OSS note : 325525.
    Note 325525 - Copying and renaming systems in a BW environment
    Summary
    Symptom WARNING: THIS NOTE HAS BEEN REPLACED.  FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
    You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
    Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
    Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
    Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
    Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
               Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
               Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
               Reactivate all partner agreements that carry the new logical system name after renaming.
    Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
               Solution scenario 2):
    If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                        Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                        Reactivate all partner agreements that carry the new logical system name after renaming.
    Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
    Scenario 3) You want to copy a single BW system of the group by database copy.
    Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                         Solution scenario 3)b): See Note 184754.
    Scenario 4) You want to copy a single source system of the group by database copy.
    Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
               Solution scenario 4)b): See Note 184322.
    Scenario 5) You want to import a client copy in a source system.
               Solution scenario 5): See Note 325470.
    Thanks & Regards,
    Suchitra.V

  • Error message does not lead to the custom tab me51n

    Hi Experts,
    When I try to to create a PR in me51n and check, a popup with error messges appear when we pick one of the entry and select edit button that leads to the field of that concerned tab.I have a custom tab and cutom field the issue is error message is displayed to fill the custom field but when I check mark that error and select edit that does not take me to the custom tab where custom field exists please suggest I have tried lot of user exits but no use.
    appreciate your help......

    We added some error message checking using Function exit EXIT_SAPLMEREQ_005. How we can bring the screen to Customer Data Tab when there are any errors under the tab. And as long as the error is not fixed, the screen will stay on the tab?
    To eloborate my question - in ME51n/Me52n, the system gives a messages window/subscreen with errors or warnings upon clicking the check button or upon save. On the messages window/subscreen, we can select a particular message and edit will take action to the corresponding tab with the cursor on the field with the issue. I understand this is standard functionality.
    However I'm looking for a way to make this work for a mandatory field on the customer data tab i.e., when I select the error message pertaining to this mandatory field and choose edit, control should jump to the customer data tab with the cursor on the mandatory field.

  • Display the Customer/Vendor Name in the General Ledger Report

    **I have Questions about General Ledger Report in SAP Business One. How can Display the Customer/Vendor Name in the General Ledger Report.**
    *Just would like to ask if its possible to display the Customer/Vendor Name in the General Ledger Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?*

    If ur selection creteria by g/l account,u can display customer/vendor name by including
    offset account from form settings.

  • Display the Customer/Vendor Name in the Check Register Report

    Just would like to ask if its possible to display the Customer/Vendor Name in the Check Register Report? The format simply have the Customer/Vendor Code on the said report.  Is there a work around on this?
    Thanks...

    Llowen,
    You may develop a Query like this
    SELECT T0.CheckNum, T0.PmntNum, T0.VendorCode, T0.VendorName,  T0.TaxDate, T0.CreateDate, T0.PrnConfrm, T0.CHECKSUM FROM OCHO T0
    WHERE T0.Canceled = 'N' AND (T0.CheckDate BETWEEN  '[[%0]]' AND '[[%1]]') OR (T0.CheckNum BETWEEN '[[%2]]' AND '[[%3]]')
    Suda

  • The Customer/Vendor Name in the General ledger Report Form.

    I have Questions about General Ledger Report in SAP Business One. Display the Customer/Vendor Name in the General Ledger Report.
    Just would like to ask if its possible to display the Customer/Vendor Name in the General Ledger Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?
    Please help me.

    Hi,
    In the Standard Reports, you cannot add a new column.
    As mentioned by me earlier, please check 'Offset Account Name' column in the Form Settings if the same is of help in your case.
    You can check Note No. [1045356|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1045356] regarding the issue. The same has been fixed in 2005 A PL23.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Delete or Rename the VC Model name

    Delete or Rename the VC Model name
    I have created some models I am not able to delete or remane them, could you please advice me  how to achive this.
    Thanks

    If you use this version, please use the following documentation to rename or delete your models.
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/05d6004bb10488e10000000a155369/content.htm
    Regards, gilles.

  • How do I add the customer's name to Workflow Notification email subject line?

    How do I add the customer's name to Workflow Notification email subject line?
    I'm expecting that I need to add a tag, but I'm not sure what the correct tag would be, I have tried a few but it just writes the tag I inserted and not the customer's name.
    Thanks

    This is something you can not add at the moment. You can change the layout a bit of workflow notifications from the system but you can not change the subjects at this time to render a system tag like that.

  • Changing Custom Tab Name in ML81N

    Hi All,
    I have created a new custom tab in ML81N transaction. When i created it by default it's name is coming as 'Addtl data'. I need to change that name as per my requirement. So please provide me a solution to change the name.
    Thanks in Advance

    hey this is functional requirement , no need of ABAPer work
    go to SPRO->material management->purchasing->purchase order->texts for purchase order
    hope this will help u
    with regards
    s.janagar
    Edited by: Janagar Sundaramoorthy on Apr 16, 2009 2:55 PM

  • Changing Custom Tab Name in ME21N

    Hi All,
    I have created a new custom tab in me21n transaction. When i created it by default it's name is coming as 'Customer tab' [H11 - Customer data]. So now i need to change that name as per my requirement. So please provide me a solution how to change the name.
    Cheers,
    Santosh

    hey this is functional requirement , no need of ABAPer work
    go to SPRO->material management->purchasing->purchase order->texts for purchase order
    hope this will help u
    with regards
    s.janagar
    Edited by: Janagar Sundaramoorthy on Apr 16, 2009 2:55 PM

  • Change Custom tab names in Me21n

    Hi
       We have written a screen exit to create a new custom tab in Header data of Me21n. Can anyone has any idea of changing the name of this tab - By default it is coming as 'Customer Data'.
    Appreciate help on this
    Thanks
    bpr

    hi,
    Changing Tab Names in  ME21N
    Re: change tab names
    open the links and they may help you......give a try....
    Regards,
    Praveena.

  • Adding Custom tab name in VF02/VF03 Menu Bar

    Hello Gurus,
           I am working on one of the requirement in which i need to enhance the Billing transaction VF02/VF03. I had to add custom tab at header level. I have done that successfully. My problem is with adding the new custom tab in VF02/VF03 menu bar. I want to display my custom tab at VF02(after entering VF02 with Billing Document Number) -> GOTO -> Header ->  <Custsom tab name> which should lead to my custom tab. Please let me know the procedure we need to follow in acheiving this.
    Good Day,
    Thanks & Regards,
    Uday S.

    Hi Uday,
    I think there is no possibility to display it standard menu.
    Regards,
    Madhu.

  • How can I get the View Tab name on the Crystal Report Viewer at runtime?

    When a report is displayed in the Windows Forms Crystal Report Viewer and the user drills into the report, the drill down view is displayed in a seperate view and is identified via a View tab at the top of the report.  I can determine the index of the view tab that is currently selected, but I need to access the text that is on the View tab.  The only properties that I've found that pertain to the "view" on the Crystal Report viewer are the ActiveViewIndex and the ViewCount.  Unfortunately, neither of these items help me because they are not specific to a certain section of the report.  Has anyone had any luck accessing the View Tab properties ?  Thanks.

    The tabs at the top of the page are nested within some of the viewers controls. Through trial and error you just have to find the right one. In this case the main part of the report is in the first control. This happens to be a TabControl. From there you can loop through the TabPages on the TabControl to grab the names of the tabs.
    Here is a quick example of what I did to get the tab text. All this code was in a button click event.
    Control oControl = crystalReportViewer1.Controls[0];
    TabControl oTabControl = (TabControl)oControl.Controls[0];
    foreach (TabPage oTabPage in oTabControl.TabPages)
         MessageBox.Show(oTabPage.Text);

  • How to Locate the Custom Form Name  in Oracle Apps

    Hi hussein,
    We had a migration project from 11.0.3 NT to 11.5.10.2 AIX, and it include
    1 form I guess. The client user is showing me the navigation tree where the customized form was located.
    She opened the NT Oracle Apps 11.0.3 and it is showing the following:
    Cash Management Responsibilty
    + Other
    Enter Adjustment >> this is the customized form that she showed me
    When the form opened, i shows a block with parent table "AP_BANK_ACCOUNTS_ALL" and a child table
    "CEC_ADJUSTMENT_RECON".
    My question is, based on the navigation, how do I know which is the location of the forms.fmx? of what
    module was it registered to?
    ==============
    I tried to navigate to the custom form and open it, then click "Help --> About"
    from the menu bar, but it does not show you the form name and the forms executable location path,
    (not like the standard forms of oracle where it shows the form name),
    the "help" being shown is the help of the runtime form in a normal default oracle form window.
    so I assumed that the custom form has been registered but not following the standard procedure.
    ==============
    How do I reverse locate it? base on the "tree" > Enter Adjustment
    Thanks a lot

    Hi,
    Please see (Note: 176852.1 - Integrating Custom Applications with Oracle Applications Release 11i), Step 10-f.
    For the (Help > About) issue, please see if (Note: 556755.1 - Forms Version Not Showing On 'About Oracle Applications' Form From Help Menu) helps.
    Btw, I guess we had a similar discussion before in this EBS 11i Customized Oracle Forms and Reports.
    Regards,
    Hussein

Maybe you are looking for