Render left eye and right eye in cs6

Hi there,
I have a video that it is 3D Stereo in after effects and it is on anaglyth mode ( added a camera, second mouse button, camera, create stereo 3D rig ) and i have all set. But now how i render the left and right eye, with out the anaglyth look?
Cause now in the main comp where is the Stereo 3D Controls, both comps are off ( that is normal) but when i enter in the both comps i notice that they are not offsseting as they supose to do ( or how it doing on the main comp) I notice that the left and right comp have been offset to left and right but the image is not moving, and if i the layers as 3D i will have a gap, and if i try to compensate the by incrising the size of the comp, the gap is even bigger. so I dont know how to do it. Can anyone help me?
Thanks

If you are referring to these arrows in the CS5 interface:
They have been removed in CS6:
note:
If you're new to CS6 from CS5, just wait until you try to select
a transition vs. a cut point in the Timeline.

Similar Messages

  • Left pane and right pane(Multiple Panes/Multiple Views) in single FACET

    Hi All,
      Please suggest how can we add left pane and right pane(Multiple Panes/Multiple Views) in single FACET , Do we need to create mutiple custom BO's or single custom BO is enough.    Is it feasible requirement to place mutilple panes/views in a single FACET.   Please suggest. 
    Thanks in advance.
    Tim

    Hi,
       Use Back Satement for that.
    ex.
    DATA:  TOWN(10)      VALUE 'New York',
           CUSTOMER1(10) VALUE 'Charly',
           CUSTOMER2(10) VALUE 'Sam',
           SALES1 TYPE I VALUE 1100,
           SALES2 TYPE I VALUE 2200.
    RESERVE 2 LINES.
    WRITE:  TOWN, CUSTOMER1,
          /       CUSTOMER2 UNDER CUSTOMER1.
    BACK.
    WRITE: 50 SALES1,
           /  SALES2 UNDER SALES1.
    Reagrds,
    prashant

  • Move to previous or next magnified photo     Press Left Arrow and Right Arrow keys does not work

    Move to previous or next magnified photo
    Press Left Arrow and Right Arrow keys
    This command no longer works in iPhoto. The photo just bounces for a moment, then all the photos begin scrolling. I used to be able to just hit the key to scroll one at a time.

    What version of iPhoto and system are you running?  What mode are you in, edit, full view, full screen, ???
    OT

  • Role of left input and right input in merge join

    Hi All
    I really appreciate if someone explain me the difference between left input and right input in Merge Join.

    Think it in terms of transact sql join statement. The left input and right input represents the left and right part of join operation. So depending on type of operation chosen like LEFT JOIN,INNER JOIN etc it takes correspondig input as the base input and
    does join operation with the other input. Also it relies upon order of records in input which is why its essential that data should be sorted and also Issorted property must be tru for both the inputs.
    The real significance of choice is for left join as it will take left input as base table and does the comparison with other input returning all records from base input irrespective of whether or not it found a match. In all other cases (INNER/FULL JOIN)
    it gives similar output regardless of the which input you choose as left or right input.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • LI2721s 1 inch border on left, top, and right sides

    Hello,
    I called tech support but they didn't even seem to know what I was talking about in regards to this monitor, someone will get back to me I was told.
    I recently bought this on Amazon, and it looks great, the entire point of me upgrading my monitor was the entire "edgeless" monitor...... but I seem to have a 1.5 inch border (both bezzel, and black bars).  Is this just a fact of the monitor, in which case, it should really be told somewhere in the advertising that this monitor has a 1 inch border.  Orrrrr its a software issue, either or any help is appreciated.
    v/r,
    Z

    Hello Bgriffin2,
    As I told you guys in Twitter, IMO this is not a technical problem, this is an advertaising problem. The black border is not part of the LCD panel, its part of the transparent plastic that protects the lcd, but is painted, there are no pixels behind that black border.
    Can you guys plug one of these monitors and check this by your self and confirm me and the rest of the customers that this is a mistake in the advertising ?.  PLEASE TRY IT YOURSELF !
    I'm copying below some review from Amazon.
    "As many others posted, it is no where near edgeless. I've gone under my graphic's card settings and scaled it to 100% vertical and horizontal and still no luck. I looked at the screen under very good lighting and found that the black 2/5 inches from both the left and right edges are not pixels and is colored very well to blend in with the pixel screen."
    "I'll weigh in with the "not edgeless" camp. It's actually not edgeless in two ways. 1) there's a 3/16" plastic frame around the entire monitor. It would be easy to look at the product photo and believe the glass goes up to the edge with only a band of plastic across the bottom."
    "Secondly there's a 3/8" 5/16" band of dead real estate inside this plastic frame along the sides and top. This band is not apparent when the monitor is off, but when the monitor is on it just doesn't light up. It actually looked to me like i just needed to figure out how to scale the monitor properly, but i searched through all the options and no dice. Plus i verified that the actual live pixels measure 27" diagonally, so this is apparently the way it was intended to look."
    "The screen has quite a large annoying bevel. Their description of "The Worlds first edgeless 27" IPS Display" is so massively misleading it's insane, "world first" lol, world's first what?"
    "As many others posted, it is no where near edgeless. I've gone under my graphic's card settings and scaled it to 100% vertical and horizontal and still no luck. I looked at the screen under very good lighting and found that the black 2/5 inches from both the left and right edges are not pixels and is colored very well to blend in with the pixel screen."

  • Regarding left justified and right justified in sap script

    Hi Experts,
    I create sap script. in sap script i have 2 field in one row 1) amt discription and other is amount... amt discri is a left side and amount is a rigth side like:
    amt discript   amt
    blablabla      100
    now what i want amt disc should be left side and and amt should be right side...
    so how can i do this?? if that 2 field is different row so i have no problem but this field in one row.. so how can i make paragraph element or give tab in one row...
    Give me suggetion.
    Vishal

    I am fine...Thanks.. How are you?
    You can go to SE71...
    Go to Paragarph ...select your paragraph say <b>P1</b>.. go to Tabs..
    Now define as I have suggested...
    If you want to use only one for the Amount that define like:
    1 15 CM RIGHT..
    In the text element write like this:
    P1      Amt Desc,, AMT
    RIGHT tab means, the value related to that field should end before the specified limit. Like in this case it should end at 15 CM.
    Regards,
    Naimesh Patel

  • No sound out of left speaker, and right speaker is extremely quiet

    Hello,
    I have an HP Pavilion DV5 Laptop.  I'm having issues with my speakers, and am looking for help. My speaker on the left won't play anything, and the one on the right is annoyingly quiet. When I plug in headphones they work perfectly fine.

    Hi Wumbo-Wizzard,
    Welcome to the HP Forums!   I understand that you are having a problem with the sound coming out when you connect the speakers. I will try my best to help you with this issue. To better guide you, could you please give me the model number of your notebook and the operating system that you are running on it. Here is a guide for How Do I Find My Model Number or Product Number?
    In this document for Troubleshooting Sound Problems with External Speakers and Headsets in Windows 7 are steps that may resolve this issue.
    I hope this information helps, please let me know.
    Thank you,
    I worked on behalf of HP.

  • Separating left channel and right channel

    My composer needs a QT file that requires the following:
    1. h.264 compression (for upload)
    Audio: Left channel temp music / Right channel DIA/Vo/SFX
    HOW DO I SEPARATE THE CHANNELS?

    duplicate your sequence (you can always get back if you mess up)
    in the dupe sequence, if your channels are now stereo, highlight the track,press option L (lower case) to make them mono. in your sequence settings define the audio outputs to be 2 mono. control click in the track near the on/off button and assign channels to either 1 or 2.

  • Left USB and Right USB work differently ?

    I v a USB sound cart (MBox 1 by digidesign)
    Wen I use togeteher with it an external hard disk connected with USB (some time the fire wire is occupied by another hard disk) if the USB hard disk is on the left side (looking the screen) and the MBox on the right...the hard disk start making a "periodic" sound similar to a metronome and it doesn't run....if I invert the positions it work fine.
    Is this normal ?
    tanx
    Shiama

    I had this problem about 2 weeks ago. I called digidesign and told them my mbox was not working properly i kept getting the error message about increasing buffer size. they said that the usb ports on the mbp's are different and digi does not support the usb port on the right. so i tried the left and it hasn't given me problems since. although now i just got a new replacement so hopefully it will still work. on the online protools manual it said digi doesn't support the left usb port on the mbp.

  • In Keynote '09 distribute objects horizontally/vertically is distributing objects beyond the slide. How do I make the left-most and right-most objects the limit of the distribution?

    I used to have the option of distributing objects so that they would overlap, but the current "distribute" tool is functioning as if overlapping isn't allowed. The result is that the objects move beyond the limits of the slide. Any suggestions?

    I know that's what *should* happen, but it just doesn't. I've made screen-grabs of the entire process:
    Like I said, this use to work just as you've described it. Is there a box I accidentally selected? I just really don't understand why the tool has changed the way it functions...

  • [HW Problem] Some numbers and left and right keys are not working

    Numbers one, two, three, four, eight, nine, zero, left, down, and right arrow keys constantly stop and start working. This also happens in the BIOS. I have to remove the keyboard, the hdd, and do a reboot to get them working.
    Device:
    Dell Inspiron 1121
    Intel Core i3 330UM Processor 1.2GHz
    2GB DDR3 RAM
    250GB HDD
    >uname -a
    3.12.4-1-ARCH #1 SMP PREEMPT Sun Dec 8 21:18:00 CET 2013 x86_64 GNU/Linux
    >df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda1 19G 8.9G 8.8G 51% /
    dev 933M 0 933M 0% /dev
    run 935M 748K 935M 1% /run
    tmpfs 935M 2.2M 933M 1% /dev/shm
    tmpfs 935M 0 935M 0% /sys/fs/cgroup
    tmpfs 935M 36K 935M 1% /tmp
    /dev/sda4 114G 47G 61G 44% /home
    >pacman -Q | grep xf86-input
    56xf86-input-evdev 2.8.2-1
    xf86-input-joystick 1.6.2-2
    xf86-input-keyboard 1.8.0-1
    xf86-input-mouse 1.9.0-1
    xf86-input-synaptics 1.7.2-1
    xf86-input-vmmouse 13.0.0-2
    xf86-input-void 1.4.0-5
    >lspci
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    01:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
    02:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] (rev 5e)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    Is this a hardware problem?
    Last edited by jjshinobi (2014-01-15 02:08:51)

    jjshinobi wrote: This also happens in the BIOS.
    Then I wouldn't think it's to do with the Arch, updating does not stop parts of the keyboard working for the bios as it's separate firmware. When you can access the bios after first turning on, your PC has not yet accessed the hard drive to load the drivers for the operating system yet. Also as far as I'm aware Arch (or any other operating system in fact) has never updated the bios firmware.
    Last edited by Kartious (2013-12-17 14:04:18)

  • Left table data Right table multiple returns

    Hello all and thank you for taking the time to help.
    I have a left table and right table I am querying from 2 remote hosts. The information in the left table is unique and has everything I need except for 2 fields; the information in the right table can have multiple rows for the same identifier. I am trying to get the latest rows information on the right. This is a snapshot of the tables:
    Employee Table
      Emp_num       Emp_Name   Emp_Store     Emp_Category     Emp_Location
      W561789        Chris           R79                Sales     98-778-77
      W571779        Charles           R81                Sales     87-988-98
      W561874        Sam           R79                Management     76-977-97
    W561875        Tod           R79                Sales     98-778-77
    Customers Table
      Emp_num    Wait_Time  Shipment_Status      Shipment_Date
      W561789     1
      W561789                          Shipped               2/28/2011
      W561789                          On_Order             2/27/2011
      W561875                          On_Order             2/27/2011What I am trying to pull is specific information from the Employee table, and only the most recent matching record from the Customer table. My query looks something like this (it doesn't work, or it takes a really long time to run)
    SELECT
        D.EMP_NUM, D.EMP_NAME,D.EMP_STORE, D.EMP_CATEGORY, D.EMP_LOCATION, M.SHIPMENT_STATUS, M.WAIT_TIME
    FROM
        DB1.TABLE1@HOST_A_LINK  D,
           (SELECT EMP_NU, SHIPMENT_STATUS, WAIT_TIME,
                             ROW_NUMBER() OVER(PARTITION BY EMP_NUM ORDER BY SHIPMENT_DATE) rownumber
                 FROM DB1.TABLE10@HOST_B_LINK) M
    WHERE D.EMP_NUM=M.EMP_NUM
    AND rownumber=1
    AND D.EMP_STORE='R79'
    AND D.EMP_CATEGORY IN ( 'Sales',
         'Management',
         'Supervisor')
    AND D.EMP_LOCATION IN ( '98-778-77', '87-988-98')thanks

    Just to close the loop on this question, I figured it out. I had to move the ROW_NUMBER() alias outside the scope of the WHERE clause. The query looks like this:
    SELECT
             D.EMP_NUM,
             D.EMP_NAME,
             D.EMP_STORE,
             D.EMP_CATEGORY,
             D.EMP_LOCATION,
             M.SHIPMENT_STATUS,
             M.WAIT_TIME
    FROM
        DB1.TABLE1@HOST_A_LINK  D,
           (SELECT
            FROM
                    (SELECT
                                EMP_NU,
                                SHIPMENT_STATUS,
                                WAIT_TIME,
                                ROW_NUMBER() OVER(PARTITION BY EMP_NUM ORDER BY SHIPMENT_DATE) AS rownumber
                     FROM
                               DB1.TABLE10@HOST_B_LINK
            WHERE rownumber=1) M
    WHERE
          D.EMP_NUM(+)=M.EMP_NUM
          AND rownumber=1
          AND D.EMP_STORE='R79'
          AND D.EMP_CATEGORY IN ( 'Sales',
                                       'Management',
                                       'Supervisor')
          AND D.EMP_LOCATION IN ( '98-778-77', '87-988-98')

  • Mouse won't left click or right click

    Mighty Mouse (wired) has stopped recognising left click and right click. All clicks on the mouse are interpreted as a click on the scroll wheel ("centre click") which brings up Dashboard and prevents normal use of the mouse. Is there a way to fix this, or is the mouse dead?
    I have unplugged the mouse a few times, but no change. The side buttons still work and the scroll wheel still operates normally, just no left or right click. My spare mouse is an older style (from a G4) so can't access the relevant preferences to re-map how the Might Mouse should operate (eg, to change centre click to operate the normal left click function). Any suggestions? It's still under warranty and has already been replaced once for a different problem.

    You could try cleaning it:
    Use a clean lint-free cloth lightly moistened with water. Wipe the ball and the surrounding area, making sure to rotate the ball itself to ensure complete coverage. If the scrolling feels rough or if the scroll ball isn't scrolling up, down, or side-to-side, hold the mouse upside-down and roll the ball vigorously while cleaning it to help dislodge any particles that may have collected on the internal hardware.
    Let us know if this helps,

  • Left and Right eye views

    I have written an application that displays the left eye view in one window, A, and the right eye in another window, B.
    Extract from the code:
    >>>
    Canvas3D canvas3D_A = new Canvas3D(gc);
    canvas3D_A.setMonoscopicViewPolicy(View.LEFT_EYE_VIEW); // <--
    Canvas3D canvas3D_B = new Canvas3D(gc);
    canvas3D_B.setMonoscopicViewPolicy(View.RIGHT_EYE_VIEW); // <--
    View view = new View();
    view.addCanvas3D(canvas3D_A);
    view.addCanvas3D(canvas3D_B);
    ViewPlatform viewPlatform = new ViewPlatform();
    view.attachViewPlatform(viewPlatform);
    <<<
    The problem is that the left eye image is translated to the left and the right eye image to
    the right. I seems like the distances correspond to PhysicalBoby
    left eye position : (-0.033, 0.0, 0.0)
    and
    right eye position : (0.033, 0.0, 0.0)
    I want the images to be centered while preserving the stereo effect. Which parametes etc shall I manipulate?

    Sorry if a probably used the "wrong" terminology.
    In fact you can watch these image with "polarized glasses" as well.
    I also initially though that J3D would provide the option of directly doing the job.
    One day may son got polarized glasses (colorized with Red and Blue) from a childrens comics magazine and I also wondered if it was possible to easily create such kind of images with Java 3D since, as you also did, J3D offers the facility to set the right/left monscopic eye view.
    I didn't manage to find a direct instruction to render the combined result so i simply used the algorithm consisting in:
    set the right monoscopic view
    get the rendered Canvas3D image ( as a BufferedImage) and apply a Java image filter (i.e. colorize with red color)
    set the left monoscopic view
    get the rendered image and apply a Java image filter (i.e. colorize with blue color)
    merge both BufferedImages (red and blue) in a single image.
    ..and finally watch the result with the polarised glasses.

  • How can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision.  r there any apple product specifically for the blind?

    how can i increase the font size on Safari and email so my mother who is legally blind in left eye, right eye 50% vision.  r there any apple product specifically for the blind?

    From the Safari menu bar click View > Zoom In  or press Command + on the keyboard to increase the size of the page.
    If that doesn't help, open System Preferences > Accessibilty > Settings then select Zoom on the left.
    You can also increase the resolution on the dislplay. System Preferences > Displays > Display > Scaled
    You can also get help by posting in the Apple Support Communities > Vision forum here.

Maybe you are looking for

  • Muse dropdown menus won't "hide" in design phase

    Suddenly (since downloading v3.0), when I'm in design mode, ALL of my dropdown menus are showing. Before, they'd do that every time I made a change to the menu, but I could go onto my master page and click a menu item that DIDN'T have a dropdown and

  • How can i retrieve the output of procedure using a select statement ?

    Hi every one. this mite be dumm ? how can i use the output of the a procedure containing multiple rows of data in a select statement ?

  • Using JDO in a Servlet container/app server

    Hi, I was just wondering what Solarmetric recommends when using Kodo in a servlet container/app server. Specifically the following: 1. Should each user session maintain a PersistenceManager or should the PM be created per request? I am thinking it mi

  • Workflow intiator changed when modify item

    I have SharePoint 2010 List customized using InfoPath and workflow running using Nintex WF 2010 ,  the form is two parts , one is edited by user and second part is visible and can be edited only by admin, the weird behavior I have and occurs randomly

  • How to generate graph of total CSV used space ?

    hi , I want to generate graph of total  Hyper-v CSV used space we use scom and i can get graph of each volume individually. I want to create a summation graph to know average growth rate Ramy Shaker