Rendering error 50 when trying to export in iMovie 10.0.1

I am trying to export a 74 minute video and I keep getting "Share failed" with a rendering 50 error.  I have tried to export to a thumb drive, to the desktop and to youtube and none have worked. Any help?

I had the same issue recently with non HD videos I re-edited recently.  AppleCare could not help.  Here's what I did and it worked.
1.  First, I checked the partial shared video on my desktop and noted where it stopped.  I then trimmed or deleted the clip just after where it stopped.
2.  Then, I closed iMovie and rebooted my iMac, then tried Share again.  I got this to work.  ***** to lose part or all of a clip.  It seems iMovie didn't like some of my clips, or they were corrupted somehow in the capture process.
Hope this helps, Eddie

Similar Messages

  • -50 Error When Trying to export in iMovie

    Hello friends
    When I try to export this amazing video of a coworker, the movie begins to export, stops, and then says
    'The project could not be prepared for publishing because an error occurred. (-50)'
    I've tried three times starting the project over to avoid it, but still same issue
    Help me Obi Wan Kenobi, you're my only hope.

    I had the same issue recently with non HD videos I re-edited recently.  AppleCare could not help.  Here's what I did and it worked.
    1.  First, I checked the partial shared video on my desktop and noted where it stopped.  I then trimmed or deleted the clip just after where it stopped.
    2.  Then, I closed iMovie and rebooted my iMac, then tried Share again.  I got this to work.  ***** to lose part or all of a clip.  It seems iMovie didn't like some of my clips, or they were corrupted somehow in the capture process.
    Hope this helps, Eddie

  • IMovie error when trying to export-file open with write privilege

    When trying to export an iMovie, after about two hours, I got a message - error - a file is open with write privilege.  Any idea what might be causing this error or what the error message means?

    Ask the users in the iMovie forum: https://discussions.apple.com/community/ilife/imovie?categoryID=141

  • When trying to export an iMovie project I get the following error message (-108).

    When trying to export an iMovie project I get the following error message (-108)

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Error when trying to export excel from Chrom

    Hi,
    I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution. 
    Thanks.
    Error message:
    To export a list, you must have a Microsoft SharePoint Foundation-compatible application

    Hi,
    From your description, when you export a SharePoint list to excel from chrome, you get an error.
    In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
    For your issue, make sure the excel client have been installed in your environment.
    To narrow down the issue, I would like to confirm the following information:
    To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
    What version is your office client? office 2013 or 2010? 32bit or 64 bit?
    Besides, here are some similar posts, you can take a look at:
    http://community.office365.com/en-us/f/172/t/160015.aspx
    https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
    I am looking forward to your reply back.
    Best regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error when trying to Export

    Hi all,
    I'm getting a javascript error, when trying to export. (i.e. "Deployment Management" -> "Export").
    When I click on this link, a popup window is appearing. But, on that window, a javascript error occures. Nothing display on that window. (empty).
    JavaScript error is :
    Line : 207
    Char : 5
    Error : 'ls' is undefined
    Code : 0
    URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
    Line : 30
    Char : 6
    Error : Object expected
    Code : 0
    URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
    IE version : 7
    This is OIM Fresh installation. I did not do any modification on this yet.
    Regards,
    Chaturanga
    Edited by: chaturanga on Aug 9, 2009 12:04 PM

    Hi Martin,
    We are using OAM also. So, It might cause these errors. We will try to Install it from the beginning....
    Thanks....
    But, I have another issue.
    1) We put our new changes by running patch_jboss.cmd file. After doing this, if we run xlStartServer.bat on <OIM_HOME>\bin directory, we can see all the changes.
    But, if we start jBoss using <JBoss>\bin\run.bat file, we can not see any changes. I try to clear cache using PurgeCache.bat file. But, it is still not working....
    2) When we start Jboss using xlStartServer.bat file, loggs are not written into <JBOSS>\server\default\log\server.log file. I try to configure using best practice guide. But, it is still not working...If I start JBoss using run.bat file on jboss, it writes loggs to server.log file..
    3) Earlier, when we are doing development, we did not use OAM server to connecto to web site. So, for some customizations, I get the current user's userLogin from
    <bean:define id="userLogin" name = "userMemberOfForm" property="userID" type="java.lang.String"/>..This works fine..
    But, since we are going to use OAM or Windows authentication to connect to OIM web in live, it returns null or empty for "userLogin"....(if we use the above code)...How can I get the userLogin of the current login user....???
    Regards,
    Chaturanga

  • Login error when trying to Export

    Hi
    I receive an error when trying to export to Word.
    The message is simple "An error occurred when signing in", not very useful.
    I have reset my password several times and have obviously been able to login here with the same account.
    OS Win XP
    Browser Firefox 19
    Reader 10
    Can anyone suggest anything else?
    TC

    We are outside our 30 days!
    YOUR PACKAGE SUDDENLY STOPPED WORKING.
    AT YOUR STAFF SUGGESTION I UPGRADED READER AND IT IS NOW TRYING TO GET ME TO UPGRADE IE TO 8.
    PRODUCT SUPPORT?
    I DON'T THINK SO!!!!!
    CUSTOMER SERVICE?
    I DON'T THINK SO!!!!!
    Thanks for nothing.

  • Unknown Error when trying to export movie with certain PNG files in Adobe Premiere

    Hi!
    I've made an animation video in Premiere Pro CC2014 combining apple pro-res live action with png animation. When trying to export, some parts of the video are no problem, and some (seemingly random) png files Adobe Premiere just doesn't like?? I don't understand why it will export some and not others?
    Help??!
    Thanks so much!!

    Error compiling movie can be anything from gap to bad clip, transition, effect, nest, you name it.
    Export from AME with preview open and watch were in the timeline it goes wrong.
    That is the place to fix it.

  • Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

    We're using ASP.net with .Net 4, developing with Visual Studio 2012.  We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service).  The reports are
    executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
    Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    We only receive this when running a report that uses expressions on a separate thread.  I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
    This didn't occur with the previous version of our application which used .net 3.5.

    As mentioned, we are not using the Reportviewer control, we are rendering locally.  Not certain if that would make a difference.
    Also, I had tried using all the built-in accounts.  Just for kicks I changed it to LocalSystem again, then reset IIS (see image below).  I then tried to export the report in a worker thread and received the same error.
    Here is the text from the exception:
    Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
    at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
    at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
    at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    --- End of inner exception stack trace ---
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

  • Why is Premiere getting an error when trying to export .MXF files?

    Hello!
    I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
    The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
    The next time, it crashed right away with over 2 hours still remaining.
    So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
    I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
    I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
    Thanks in advance for any and all help!

    If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
    Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
    I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
    Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

  • Why am I getting an error when trying to export a jpeg at 300 dpi?

    I am trying to export a 18" x 24" illustrator file to a jpg at RGB 72dpi and CMYK 300 dpi.  72, no problem but when I try to export at 300 I get an error message. Any ideas why this is happening?

    Not so much a RAM problem as it may be a scratch disk problem.  Illustrator may be looking for 1.) a place to put the file, and 2.) enough scratch space to accomplish the op.  Try opening the .ai file using Photoshop using the size 18 x 24 @ 300 ppi in the Open dialog.  That will rasterize the file ( not sure why you'd want to ).

  • Error when trying to export to wmv

    i keep getting an error when i try to export my movie to wmv. is anyone else having that problem?

    The flip4mac update doesn't appear to solve the problem exporting from iMovie 08. I have updated both iMovie and the flip4mac exporter plug in and still cannot export from within iMovie - it comes up with said error. I have to export to a *.mov file first, and then open that file in quicktime, then export to *.wmv from within quicktime itself. Perhaps using VisualHub would be cheaper (and faster).

  • Error when trying to export GPO Backup Folder

     Setting Default file format has following errors:
    Rule Save Word files as has error: The string is missing with ID: '
                  ' in setting 'Default file format'.
    I am trying to export a Group Policy using Microsoft Security Compliance Manager and I get this error
    Any ideas as to what is wrong??
    thanks
    many thanks

    Hi Martin,
    We are using OAM also. So, It might cause these errors. We will try to Install it from the beginning....
    Thanks....
    But, I have another issue.
    1) We put our new changes by running patch_jboss.cmd file. After doing this, if we run xlStartServer.bat on <OIM_HOME>\bin directory, we can see all the changes.
    But, if we start jBoss using <JBoss>\bin\run.bat file, we can not see any changes. I try to clear cache using PurgeCache.bat file. But, it is still not working....
    2) When we start Jboss using xlStartServer.bat file, loggs are not written into <JBOSS>\server\default\log\server.log file. I try to configure using best practice guide. But, it is still not working...If I start JBoss using run.bat file on jboss, it writes loggs to server.log file..
    3) Earlier, when we are doing development, we did not use OAM server to connecto to web site. So, for some customizations, I get the current user's userLogin from
    <bean:define id="userLogin" name = "userMemberOfForm" property="userID" type="java.lang.String"/>..This works fine..
    But, since we are going to use OAM or Windows authentication to connect to OIM web in live, it returns null or empty for "userLogin"....(if we use the above code)...How can I get the userLogin of the current login user....???
    Regards,
    Chaturanga

  • Error when trying to export as Flash

    I'm attempting to export my very small test project as Flash, but two errors occur:
    1. Adobe Encore has encountered an error. [..\..\src\AMEEncoder.cpp-2359]
    There is only a "Continue" button to click, so I click it and the Build Progress bar finishes and states "Completed". I then click "OK" and get this second error:
    2. "An input contract violation has occurred!"
    There is only an "OK" button to click, so I click it and that's it.
    I try to play the swf or index.html that was created and though the Flash build opens to my main menu, complete with correct navigation and highlights states, their respective videos do not playback when selected from the menu. Only a blank black screen appears. If I click Pause or Play respectively, nothing changes, but I can select the "Next" button and it initiates my set end action for that clip and correctly returns me to the main menu. So, some of the settings stick, but video playback does not.
    Some other info about this Encore project:
    From Premiere Pro CS3, I used the "Export to Encore" export option. I selected "Author With Menus", and changed my Encoding Settings to a custom setting of:
    NTSC, 720x480, 29.97 drop frame [fps], Progressive, Quality 5.0
    192 [kbps], 48kHz, 16 bit, Stereo, MPEG
    CBR, 9.00 [Mbps]
    It successfully encoded without error and opened Encore and such.
    Hope I have provided enough info...

    Hey Neil,
    Thanks for replying. When I author DVD's, I use the basic encoding standards you listed above.
    In this case, since the output is not written media, I was encoding in a way that would give me the best possible results (in theory at least) when planning on flv being the final encoded output, where lowest possible file size with best possible quality is the goal (since it's home will be on the web, not a DVD).
    As for my issue with the errors generated from the Export to Flash option, I have learned some things, and was able to successfully Export to Flash.
    One thing is that apparently the Flash encoder that EncoreDVD CS3 uses is not the same as the Adobe Flash CS3 Video Encoder or whatever Flash encoding engine Premiere uses. Encore's Flash output settings are limited, and so are the results.
    What I had to do was export my PP CS3 projects to Flash using Adobe Media Encoder and update the XML that Encore spits out accordingly to point to my newly encoded flv's, replacing the flv's that Encore created... not a big deal, but one extra step and little more waiting time.
    Now, the results are stunning! And since I'm not comfortable in Flash CS3 or coding ActionScript, having Encore create the menu interface, with all the navigation and interactivity and such, for me was a big BIG plus!

  • Error when trying to export imovie file

    I have put together a 30min slideshow of photos with music from itunes, but no matter how I try to export it, I get an error message.
    'The movie could not be sent to quicktime, because of an unknown error.
    Please make sure that your project disk has write permission, and that you have enough disk space (error-42)'
    I am running the most recent OX software, have 19gigs of space free. The file size is 698megs. Any suggestions???

    Mmmm - so it won't even allow sharing as an uncompressed full-quality QT file. Does it include iTunes store tracks? (don't know if that would cause your particular problem). Could you test by creating a new project with just a few pics (drag and drop from your current project) and without the music track? Or maybe just do a Save As, and trash the music from it.

Maybe you are looking for

  • How do I find documents in DCIM

    I downlauded some documents frpom my pc into the DCIM. How can I find these documents at the ipad?

  • Error after creating a struts portlet in weblogic 8.1 SP 5

    Hi, I am using weblogic 8.1 SP 5, to develop an struts-portlet. I tested my struts application and it is working fine. I have one action i.e firstAction and 2 jsp's in my struts application. The action just forwards to the one jsp through struts-conf

  • Icon size in Favorites panel changeable?

    I'm using CS2 Bridge (1.0.4.6), a couple of steps out of date, and trying to make use of the Favorites panel. I understand how to get things into it (I'm dragging pictures to it) and out of it (only one item at a time, ASFAIK). The icon that goes wit

  • No apple logo shown on non-native apps

    Every time i'm running a non-native app (apps not by apple) i got no apple logo on the upper left corner, it is just an aesthetic thing yet it's really annoying, apple logo is shown for apple apps, for updated apps (openoffice, skype and few more) bu

  • Node exist in a schema in orchestration

    How to check in orchestration that a particular node  exist in schema or not ? My orchestration is as follows: In decide shape,I have to check whether incoming message contains a particular node. If yes then send to it a error send port otherwise sen