Rentals and video out :(

Hi all,
I just rented my first iTunes Movie (Stardust). I was hoping to play it on my TV with the iPod Universal Dock and the Apple's component A/V cable. Guess what? Yup, rentals can only be watched on the tiny iPod screen.
Now that I think about, this makes sense for rentals since some people would use the video out to copy the rental. I was NOT going to do this! Now, I have to watch the movie on the tiny screen or transfer it back to my Mac Pro.
BTW, I have not bought a movie from iTunes.
I guess that I will be going back to renting movies on my TiVo via the Amazon Unboxed service.
Enjoy life despite its little disappointments,
Steven

Can I delete this thread?
No - doesn't work that way
Got it working.
Great - was it something obvious or is there a tip you could share?
tt2

Similar Messages

  • Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?!@

    Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?

    Playing rentals, Netflix, from local iTunes, other?
    Firstly restart router and AppleTv after unpowering to see if that helps - may or may not but quick and easy to try.
    Connection via ethernet or wifi?  If wifi are there any new devices in the house which may be causing interference or new neighbouring networks?  If feasible try to eliminate wifi issues by using an ethernet connection.
    AC

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Audio and video out of sync on short recordings

    I've scanned the discussions and see that alot of posters are experiencing
    the same problem I'm having which is recording quicktime movies
    and getting audio and video out of sync.
    In most of those posts the responses seem to be that the problem gets
    bad if you're making a long recording. I'm experiencing that, but...
    ...I'm also having the same problem on really short recordings...less than a
    minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
    I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
    Any thoughts on why even short recordings through Quicktime are out of sync?
    Thanks.

    I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
    I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

  • Macbook Pro DVI and Video Out woes..

    Hey, this seems to be a known issue although specifics are difficult to nail down. I've had my macbook pro since shortly after they were launched and been using the DVI - S-video adapter since day one, and it's been outputting to all TVs with no problem.
    I recently got a nice overtime payment from work and decided to treat myself to an external 24" display, was very pleased with it when it arrived. Plugged it in downstairs, and ran it for a few hours, putting it through its paces - worked great.
    Decided to move the whole arrangement upstairs and 'no input signal' said the monitor, the MBP just didn't detect anything in the displays. The built-in display did it's blue screen when the cable was plugged in, so it's definitely detecting something.. The monitor is connected via a DVI-D single-link cable. I've confirmed that both cable and monitor work using a different computer.
    So after this happened, I decided to try plugging it into a TV again to see if the S-video out worked and although Displays picks up the TV and everything is as usual, nothing is shown on the screen.
    Any suggestions would be very welcome before I get my hammer and remodel my computer!
    Anyone else suffering from something similar to this?
    The monitor is a 24" Yuraku YV24WBH1.
    Cheers.
    PS I've tried booting from the install CD, two versions of XP bootcamp (one with standard drivers, one with Catalyst, and the computer's old HD with 10.4 installed on it - no joy with any)

    Another update, I did some research and it seems that ATI are cagily admitting to the fact that there might be a problem with the X-series;
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=26586
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=21266
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=25682
    You'll notice that ATI tell you to contact the manufacturer of your computer if the graphics are integrated into the motherboard. Like with Apple. Much joy to be had there.
    I phoned their technical support and got talking with a specialist who was mystified and suggested 'turning off the airport'.
    Also, it seems that Apple rather significantly "underclocked" the GPUs in their macbook pros;
    http://www.reghardware.co.uk/2006/04/19/applemacbook_pro_gpuspeed/
    http://www.maconintel.com/news.php?article=178
    http://forums.macrumors.com/showthread.php?t=306024
    http://forums.macrumors.com/showthread.php?t=194647
    Could be running the GPUs are running on a lower voltage and maybe they're not working right, or the signal isn't stable enough to pick up an EDID? It seems to be quite a mystery. Perhaps the osx86 community will have some tricks up their sleaves for twisting the x1600's arm. Still doesn't explain why the monitor worked that one time.
    This probably isn't an issue for anyone who doesn't want to plug their laptop into an external display, but I suspect it's a widespread problem just waiting to rear its ugly head, especially as HDTVs become more ubiquitous.
    Anyone else struggling with external display devices, or with solutions, I'd appreciate your input.

  • 785GM-E65 and video out

    I am looking for an analog video out solution for this mobo. I bought a VGA to component video cable and that gets me an output with jiberish. I'm aiming for s-video or component. I read that some mobo's support s-video out through the VGA port. Does anyone know if MSI has included this feature on this mobo? I have not found any materials that indicate one way or the other.
    Thanks for the help.

    This board doesn't support that kind of video output. You could get a video card with super video out or get something like this converter.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16815158142&cm_re=vga_to_composite-_-15-158-142-_-Product
    Good luck!

  • 3rd generation iPod Touch and Video Out - "whoops!!!"

    Before I jump to any conclusions about Apple, here is my experience with the Video out operation of my brand new 3rd generation 64 GB iPod Touch. This is my third iPod and about a year ago I decided (at great personal expense) to purchase the Apple Composite AV Cable (despite the fact that you can buy copies of the cable on eBay for 1/10th the price). When I plugged this cable into my new iPod touch, the Video Out option was greyed out. I tried lots of different things but eventually gave up and went to the Apple Store to see what it said about compatability. Sure enough, the 3rd Generation Touch is the ONLY iPod, iPhone etc not mentioned. I call my friendly apple support person who says "*of course it will work, I am 100% sure*". I then jokingly asked if he would give me $1000 if he was wrong and begrudgingly he put me on hold "just to check". 15 minutes later (unusual for Apple) he came back to me saying that *I "might" be right but he was 100% sure that if I connected my cable via a Universal Dock it would work.*
    Now, before I go out and spend any more money on a Universal Dock, has anybody tried this? Why would apple make the change ONLY to the 3rd Gen iPod touch?
    I have noticed that there is one nasty non-apple cable on the market that claims it will work BUT it doesn't have the ability to charge...... besides I ONLY buy legit Apple products.
    Any comments?

    Wow Apple pulled tha last post almost as quick as it was written.
    I have been in the IT industry for 18 years, when I started out I read the Mac bible and got a job supporting 1000 macs (remember the wonderful days of the symbol of the little bomb and all you could do is re-install the OS - what a joke). We ditched the Mac due to limited application support (nothing has changed much has it). I did not look at another apple product for 15 years, got a Touch for free ( CC points) Firmware 2.2, loved the little bugger, had a whole new respect for Apple. Happily got 2 cables from eBay for $5.00 for both, video to the tv, charging, audio, best of all worlds. Then, I upgrade to version 3.01 for $5.00, what a deal, copy paste, etc. till I plug in my cables and nothing works anymore. Take it to the car for my FM receiver,. only mono now. Oh sorry you now have to dish out $50.00 for our cables (the /B version not the /A cause we even screwed our customers that bought our own cables) and oh ya you can only buy over priced FM receiver products that pay bloated license fees to Apple. Then we come to your story, you buy "Only Apple products" which do not work (check for the /A model of the cable, you need the /B (/B= Buy again?? Maybe) and then the support guy tells your to go out and spend yet another $50.00 on a universal dock and you are asking if you should do it. Sure spend another $50.00 for the chip enabled dock, it will work, hmm, I think I have put together a pc for less than $100.00

  • IPhone and video out

    I have tried to pass video from my iPhone as well as my touch to my TV through my receiver without any success. I know that on the regular iPod that you have to switch to video out, however, I cannot find this option on my iPhone. I am using the Apple accessories. Any help would be greatly appreciated.

    When did you get the cables for it. Not all older cables for TV out work for iPhone/iPod Touch. I bought set after getting iPhone and verified they said would work with iPhone. Works good for me.
    Only settings are in Settings => iPod.
    But default settings should be good.

  • Audio and Video out of Sync in Encore 2.0

    Here's my issue:
    I opened a project in Encore 2.0 that was an Encore 1.5 project. I have one timeline with a 2 hour movie and the AC3 audio file that goes with it. Encore 1.5 played the audio and video in sync from the timeline and burned discs with the audio in sync. The video is an MPEG2 file encoded at a 3.1 constant bit rate.
    In Encore 2.0, when I play the timeline, the audio becomes progressively out of sync as it plays. Within the first few minutes it's maybe a frame or 2 off. By the end of the film it is about 18 seconds off (audio is playing ahead of the video).
    Is this a result of Encore 2.0 conforming the audio file? If so, how am I (or anyone) supposed to attain sync between video and audio in Encore 2.0?
    I have Encore 1.5 and 2.0 both installed on the same machine. As a test, I opened the project in 1.5 and played it, everything was fine. I closed Encore 1.5 and opened the project in Encore 2.0, and the audio is out of sync.
    Any comments, ideas or suggestions?
    Mike

    Joe,
    I tried creating a project with the original WAV file and it's corresponding video and found that the audio and video were still out of sync. I did a little more testing and discovered that the audio is actually being played correctly, it's the video that is not being played correctly. Here's what I did:
    I opened the WAV file version of the audio file in Premiere Pro and noted where a hammer hit in the video occurs (01;40;30;28). I then opened Encore 2.0 and imported the video and AC3 version of the WAV file, placed them in a timeline and the audio's hammer hit is right where it's supposed to be (01;40;30;28), but the video's hammer hit occurs at 01;40;43;18.
    Next I went into Encore 1.5 and brought in the AC3 audio and video files and placed them on a timeline. I went to 01;40;30;28 in the timeline and the audio and video were both at the frame they should be at that timecode.
    Seeing how the video appears to be playing incorrectly, here's some info on my video files:
    I have 4 versions of the same film in varying encode rates with the same start and end timecodes. All four files were encoded on a Sonic DVD Creator authoring station using hardware to encode. The files are encoded at the following rates: 2.9 constant bit rate, 3.1 constant bit rate, 3.4 variable bit rate and 4.0 variable bit rate. They are each NTSC with drop frame timecode. All four files play correctly in Encore 1.5 but incorrectly in Encore 2.0.
    This almost seems like a drop frame/non-drop frame issue. Do you have any ideas?
    Mike

  • Audio and video out uf sync

    I'm using Premier elements 12.  When I open a VOB file, the audio and video are not in sync.  I can open that same file with windows media player and all is well.  What do I need to do with respect to editing a file like this?
    The information about the display on my computer is:
    Name NVIDIA GeForce GT 220
    PNP Device ID PCI\VEN_10DE&DEV_0A20&SUBSYS_069A10DE&REV_A2\4&22063C0D&0&0018
    Adapter Type GeForce GT 220, NVIDIA compatible
    Adapter Description NVIDIA GeForce GT 220
    Adapter RAM 1.00 GB (1,073,741,824 bytes)
    Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Driver Version 9.18.13.3523
    INF File oem38.inf (Section002 section)
    Color Planes Not Available
    Color Table Entries 4294967296
    Resolution 1920 x 1080 x 60 hertz
    Bits/Pixel 32
    Memory Address 0xFA000000-0xFAFFFFFF
    Memory Address 0xD0000000-0xDFFFFFFF
    Memory Address 0xCE000000-0xCFFFFFFF
    I/O Port 0x0000EC00-0x0000EC7F
    IRQ Channel IRQ 16
    I/O Port 0x000003B0-0x000003BB
    I/O Port 0x000003C0-0x000003DF
    Memory Address 0xA0000-0xBFFFF
    Thanks,
    Pete Blair

    Pete Blair
    In all your information, I did not see what computer operating system your Premiere Elements 12 is running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
    Your issue may relate to the details of your "VOB file" and how it was ripped/copied from the DVD-VIDEO and DVD disc to get it into a Premiere Elements project.
    a. project preset set for NTSC DV Standard or NTSC DV Widescreen (whichever corresponded to your recording details)...or PAL equivalent.
    b. DVD disc in burner tray
    c. Add Media/DVD camera or computer drive/Video Importer/.....
    It does not happened often, but if audio is out of sync and you are not using the above route, then consider the Command Prompt way described in the
    following
    ATR Premiere Elements Troubleshooting: PE: DVD-VIDEO/Seamless VOB Ripping
    A just in case note, contrary to some, it is not necessary to convert VOB (VTS_01_1.VOB video file and any files in that series) to any other format in Premiere Elements.
    Please review and consider and then we can decide what next.
    Thank you.
    ATR

  • Audio and Video out of Sync after Pro Res export

    I´m getting an audio/video sync issue when I´m exporting to Pro Res.
    I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
    The sequence is less than 20 minutes long. It plays correctly on the timeline.
    When I export the sequence for DVD and view it on a set top it plays absolutely fine.
    When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
    The audio and video clips are of the exact same duration.
    Possible issues...
    Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
    Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
    Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
    Any help would be greatly appreciated.

    First, yes resample the narration to 48k 16 bit.  You will probably be able to reconnect to the resampled files.  Usually works for me.   That's a simple fix and will probably solve the problem.  If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
    Wait, just reread your original post.  Export from fcp using file:  export:  quicktime movie NOT quicktime conversion with current settings.  If that works without synch issues, use compressor to convert to prores.

  • Audio and video out of synch on export

    Hi,
    I've searched the forum for this. I have a movie in FCE 4 in which the audio and video are in synch in the time line. The audio was recorded into Logic at 96, noodled, passed into FCE at 48 and then had to be lined up with the video. Then when I go to export, the resulting QT movie is out of synch, the audio now about one second before the video. I'm using QT conversion. My compresson is H.264, quality best, frame rate 30, multi-pass, 640 x 480, format AAC or linear PCM, various sample rates, stereo and mono etc. I've tried various other settings for export, but the problem remains.
    What am I doing wrong? Many thanks for any help,
    Ray

    Hi,
    Thanks for the reply. I think you're on the right track. I want the best sound possible, so I record into Logic, knowing I'm going into FCE I record at 96 so an even multiple down to 48. I think a .wav file though, and maybe that's the problem. Into FCE, but other audio there as well from the camera mic, and which I occasionally include in the sound track for ambience. All of this noodled a fair amount and then exported, the intent being to end up in 44, as it will be uploaded to youtube. I switch to 16 bit out of Logic, but the aiff vs wav may be the problem. Do think there might be a better way to do this?
    Ray

  • Audio and video out of sync after import

    I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
    As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
    Any ideas?

    Thanks. Here's the output:
    General
    Format : MPEG-4
    Format profile : Base Media / Version 2
    Codec ID : mp42
    File size : 1.05 GiB
    Duration : 51mn 20s
    Overall bit rate mode : Variable
    Overall bit rate : 2 937 Kbps
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Writing application : HandBrake 0.10.1 2015030800
    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : [email protected]
    Format settings, CABAC : Yes
    Format settings, ReFrames : 4 frames
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 51mn 20s
    Bit rate : 2 606 Kbps
    Width : 720 pixels
    Height : 478 pixels
    Display aspect ratio : 4:3
    Frame rate mode : Variable
    Frame rate : 24.145 fps
    Minimum frame rate : 0.167 fps
    Maximum frame rate : 29.970 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Bits/(Pixel*Frame) : 0.314
    Stream size : 957 MiB (89%)
    Writing library : x264 core 142 r2479 dd79a61
    Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Color range : Limited
    Color primaries : BT.601 NTSC
    Transfer characteristics : BT.709
    Matrix coefficients : BT.601
    Audio #1
    ID : 2
    Format : AAC
    Format/Info : Advanced Audio Codec
    Format profile : LC
    Codec ID : 40
    Duration : 51mn 20s
    Bit rate mode : Variable
    Bit rate : 132 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Compression mode : Lossy
    Stream size : 47.9 MiB (4%)
    Title : Stereo / Stereo
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Audio #2
    ID : 3
    Format : AC-3
    Format/Info : Audio Coding 3
    Mode extension : CM (complete main)
    Format settings, Endianness : Big
    Codec ID : ac-3
    Duration : 51mn 20s
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Channel positions : Front: L R
    Sampling rate : 48.0 KHz
    Bit depth : 16 bits
    Compression mode : Lossy
    Stream size : 70.5 MiB (7%)
    Title : Stereo / Stereo
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Menu
    ID : 4
    Codec ID : text
    Duration : 51mn 20s
    Language : English
    Encoded date : UTC 1904-01-01 00:00:00
    Tagged date : UTC 1904-01-01 00:00:00
    Bit rate mode : CBR
    00:00:00.000 : Chapter 2
    00:01:50.877 : Chapter 3
    00:03:59.218 : Chapter 4
    00:13:26.285 : Chapter 5
    00:20:57.685 : Chapter 6
    00:32:58.489 : Chapter 7
    00:39:14.031 : Chapter 8
    00:50:51.611 : Chapter 9

  • Audio and video out of sync after exporting sequence

    I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
    My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
    Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
    Video is 61 minutes and 27 sec long
    Audio is 61 minutes and 38 sec long
    That means exported video is shorter than original sequence.
    What could that be ?

    I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
    Good luck!
    Message was edited by: Anthony M Kassir MD

  • Audio and video out of sync when using quicktime conversion

    hello,
    i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
    how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
    any help is appreciated. thanks a ton in advance.
    cheers,
    clay

    What format are you converting the HDV to?
    If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
    x

Maybe you are looking for

  • I have had to restore my ipod classic 160, and now i get an error mess.

    I get an error message that says , The ipod ''160gb pod'' cannot be synced. A duplicate file name was specified. i've tryed all the steps in trouble shooting from restarting , updating , uninstall - reinstall itunes nothing seems to get rid of this m

  • Left click on early '08 MBP not working

    don't think you can imagine how frustrating this is until it happens to you. basically, yesterday my left click stopped working. restart/shutdown/safe mode atleast ten times didn't help. my magic mouse and magic trackpad were paired and the left clic

  • Work process is in running state

    Hi Experts, Our ECC6.0 is in MSCS clusters Oracle 10.2.0.4 database. When I saw the 3 to 4 work processes of both nodes are in running state then I checked the developer trace of perticular work process. dev_w0, dev_w1 etc I found the below Error- C

  • Newly installed Font not showing up in Illustrator. Can anyone shed some light as to why?

    Hello All, I've recently installed .otf version of New Century Schoolbook into FontBook. It's working fine in all my other Adobe programs (CS6 CC) but for some reason, it just doesn't seem to want to work inside of Illustrator. Can anyone give me a h

  • Unwanted layer created with text

    I added a blank layer and added some text to it. But after returning to the layers view, I see that an extra blank layer has appeared in addition to the text layer. This is a problem because I will exceed the maximum number of layers. How do I preven