REP-1352: The fonts specified for this report cannot be found for the char

We have migrated all our character reports to oracle 10g - sun solaris machines.
Now, these reports give us an error....
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG
Does anyone have suggestions.
desformat - DELIMITED
mode - character
Thanks

Hi,
Did you check this DocId:203781.1. I think it will help you problem.
Moreover does your X-server or vnc server on HP work fine.
In the past with HP version 11.0 there was always problem with HP x-server. just check that your x-server is runinig will ex. x-clock.
Cheers,
Hamdy

Similar Messages

Getting error REP-1352: The fonts specified for this report cannot be found

Dear Friends,
I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
I searched internet and found the reason for the issue i.e., as follows.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
Please help me ASAP.
Thanking you.
With Kind Regards,
Senthil Alagu .P.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

Cannot open project: the folder for this project cannot be found cs4

I am using Encore CS4 and I get the error "cannot open project: the folder for this project cannot be found"
Having searched the forums I can not find a solution for when the project folder has been deleted.
Can someone tell me the solution to this issue.

If you deleted the Encore directory, you cannot fix this. You'll have to start over.
Encore creates this folder structure:
Root or some other Folder
MyProject.ncor (the Encore project FILE)
MyProject (the Encore project directory)
Other Folders for the Encore project (e.g. Cache, Sources)
You can get the "the folder for this project cannot be found" in various ways.
There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name. You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
Folder was renamed. If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
Encore project file was moved - or Encore directories were moved. If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone. While many of its instructions are inside the project file itself, many are not. Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

I cannot not add iTunes to my iPad, I receive the following error message: This iPad cannot be used because the Apple Mobile Device service is not started.

I cannot not add iTunes to my iPad, I receive the following error message: "This iPad cannot be used because the Apple Mobile Device service is not started".

http://lmgtfy.com/?q=%22Apple+Mobile+Device+service+is+not+started%22

There was an error opening this document. This file cannot be found but the file is displayed

Hi All
I am opening a document for printing using
c:\Program Files (x86)\Adobe\Reader 9.0\Reader>acrord32.exe "c:\www\website\admin\invoices_out\BFPO_0001.pdf" "hp deskjet 990c"
The invoice opens up but an box appears with the above message
There was an error opening this document. This file cannot be found
Any help to stop the above error appearing would be much appreciated as once this is fixed I will be using
start /b c:\www\acrobat_wrapper\acrowrap.exe /t "c:\www\website\admin\invoices_out\BFPO_0001.pdf" "hp deskjet 990c"
and I can then get on with my work.
Thanks in advance and here's hoping.
John Evans

Hi Fiat Lux
Thanks anyway but I have solved it.It wasn't any fault of Acrobar Reader as such. Everytime I run a microsoft remote desktop and access my main PC from my laptop it deletes the default printer status of my printer (on the main PC) and then when I want to run the above command Reader can't find a printer to use until I reinstate it as the default printer.
Thanks anyway.

Cisco TCS "the overview for this server cannot be found"

Hi,
I have a problem on my TCS server, a message is displayed "The overview for this server can not be found"
This error message appears when I last reinstalling the usb image provided by Cisco,
Thank's
Billel

Hello Billel -
I presume because you mention USB image, you're running a 3rd generation TCS appliance?
Have you tried to repair the TCS application through Add/Remove Programs to see if that resolves the issue? I've had that issue myself once on a 2nd Generation TCS appliance, I tried a repair and uninstall/reinstall of the TCS application, eventually managed to get it back up and running, though I don't recall my actual steps.
Also just in case, because you did a reimage, did you back up the serial number, checksup, and release/option keys from the registry located in HKLM > SOFTWARE > Wow6432Node > TANDBERG > TCS. If you're missing any of that, you can obtain release and options keys from Cisco License Portal, select "Get Other Licenses", then "TelePresence Licenses to Resend". You can get the checksum by contact TAC.

The Licence for this music cannot be found

When I try to play any tracks on OVI player I get the error shown in attachment error1.jpg.
I have followed the instructions and accessed my account and in downloaded history I can see the album as shown in attachment error2.jpg
When I click on the album i am shown a list of tracks which all show a price against them as shown in attachment error3.jpg
Comes With Music was sold to me on the grounds that I could keep the music forever, and all I can say is that it appears to not be true. Beginning to believe I have been conned.
Has any one had the same issue and have they managed a fix yet.
I have had a reply from the UK and Ireland contact centre which does not fix the fault.
The reply is as follows:-
Thank you for contacting Nokia Email Care.
In response to your concern, please be advised that your account has already expired, that is why when you go to Music Store and Download Music, it shall ask you to pay. However, if you will download these files from your download history, you will not be asked for any payment.
To download from history, please follow the steps below:
1) Go to Account
2) Download History
3) Subscription
4) Select track
5) Download
For future reference, please feel free to check our website. Kindly refer to the link below:
http://www.nokia.co.uk/home/support
You may also call our Customer Care Hotline at 0845-045-5555, Mon-Fri 9am-7pm (except bank and public holidays).
Please do not hesitate to contact us again if you have any further questions.
Yours sincerely,
Patrick C.
Nokia Service Professional
UK & Ireland Team
Nokia Care
[THREAD ID:1-55RSLZW]
All the suggested fix does is suggest what i told them I had already tried.
Come on Nokia get a grip.
Attachments:
Error1.jpg ‏19 KB
error2.jpg ‏7 KB
error3.jpg ‏27 KB

So you have Comes With Music/Ovi Music Unlimited?
If you have changed your PC or installed a new version of Windows on it, then the identity with which the PC identifies itself to the service will have changed, and because the DRM is linked to the older PC or OS, your PC needs to be updated in the service. of Ovi Player doesn't offer you the chance to register your new PC when you log in, you'll need to call Nokia to get the old PC link manually released.

EIONode.xnode the governing library for this node cannot be found

I have a question concerning the LabView FPGA I/O-Node.
I want to use an FPGA I/O-node to analyze data coming from an analog input. But everytime I try to insert the I/O-node into my vi, LabView tells me it cannot find the file "EIO_TerminalDirection.ctl", which seems to be needed by "EIONode.xnode", if i got it right.
Some time ago, i could actually use this node without any problems. I'm not sure, but i think in the meantime i did a mass compile on the whole LabView directory, because LV kept asking me to do so (i had several other problems then, which disappeared after the mass compile)
If you have any ideas, anything, please post, because i cannot find any hints anywhere and i do NOT want to install the whole environment again!

Hello choluteca,
wich LV version do you use? Did you try to repair the LV version? Open system control under XP (Start/Programme/Systemsteuerung). Switch to entry software and move to National Instruments (repair). Please do this for lv, lv fpga and lv rio and try again the LV FPGA I/O node.
Kind regards,
Elmar

Plzzz help me for this report,its emergency.....

hey guys/guls...I have to develop a Repair Bill report,At the end(bottom) of this report I've to show the calculations n values like Paid amount,previous balance,Grand net & net balance, I'M doing this by enlarging(lengthening)the master record much more below the detail record(while detail record's repeating frame remains inside master's repeating frame),it gives the proper look for report with fewer(1 or 2 detail records as I wanna have,but when I run this report with a greater number of detail records like 5 or 6 it pushes the bottom values(prev.bal,g.net etc)to next page while there remains a big gap in between detail recors n bottom values,so plzzz tell me some solution for this as quickly as possible for u.

dear brother,its just a usual report just like a standard bill report, what I wanna do is to print the cash values almost 3inches above the bottom of page just like a common bill is used in market, for this I increased the length of master record's(based on master table) repeating frame n dragged the cash values(stored in master table)upto the bottom of this frame,so I think these values r coming in the push path of the detail records coz cash values move to next page if the number of detail records increases even if alot of blank space between last detail record n cash values, I've already tried the technique i.e fixing the vertical length of master or detail repeating frame but it didn't work, so plzzz tell me something else, if u may wish tell me urs email I'll send u that rdf file n sql for the based tables,thanx

This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes

I have seen others post this same question but the answers provided does not resolve my problem. My iPad Air is running iOS 7.1.2. I have been using this same computer for three years. It has Windows 7 home premium, service pack 1, 64-bit Operating System, Intel 3.4GHZ computer and 16.0 GB . I used this same computer with my iPad2 for several years. I purchased an iPad Air a year ago. I never had a problem with either iPad using iTunes. About a week ago, my computer would no longer recognize the iPad Air. I thought it must be a driver problem or iTunes somehow became corrupted. I uninstalled all of the Apple products except for iCloud and deleted any Apple software left in my Program Files and Program Files (x86). I then downloaded from Apple, iTunes64Setup.exe which is a 110,833 KB program. I installed the program without a problem. It installed Bonjour, Apple Software Update, Apple Application Support and iTunes. These programs I had previously uninstalled. I then brought up iTunes. I now plugged in my iPad Air and a popup message appeared "This iPad cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes". OK, I did as instructed. I used the iTunes installer to remove iTunes then ran iTunes64Setup.exe. I brought up iTunes and got the same message. "This iPad cannot be used because the required software is nt installed. Run the iTunes installer to remove iTunes then install the 64-bit version of iTunes" In general, I have found the Apple software to be robust and reliable. This situation however is very disappointing. I am hoping that someone has an answer that I can use to resolve my problem.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

I am locked up in slideshows, a prompt comes up "the volume for (a picture) cannot be found, how do I get out of slideshow,

I am locked up in slideshows in IPhoto, a message comes up "the volume for "some picture" cannot be found, Insert the disk or connect to the server volume and wait for it to appear on the destop, then try again." you can hit find photo, cancel (which it will not let you) or OK which does nothing, I want to delete this slideshow, or at the very least get out of slideshows, how can I do that?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when you try to view the the photos in the slideshow in full size?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Ver.9.5 The volume for file name cannot be found

HI,
My work Mac Book pro was recently upgraded to Mavericks from 10.6.8, with iPhoto 11 (ver. 9.5) also an included upgrade. One album of photos is no longer accesible - clicking on each thumbnail provokes the following window "The volume for <file name> cannot be found. The "Try again" option doesn't work, and the alternative, which is to use the finder to locate the file is useless, as the files are buried in a library spare bundle. When I copy the file name, and search on the volume with the library via finder, it pulls up tiny thumbnail size files.
I have a primary iphoto library on a dedicated USB external drive, which I back up not everytime I update the library (200 gbs spare bundle over USB2!), but regularly. I fear these recently imported files, have not been backed up before up erasing cards, and upgrading system OS, have gone.
Is there any way of getting into the library via finder, or elsewhere in iphoto to refind the original master files which are in there somewhere? These files opened perfectly in iphoto before the recent upgrade.

Thanks for the fast response. I've followed your directions and can't find the file in there, in Masters, Originals, or Modified folders. I found files in Thumbnails folder though. Some of the files from the same event are fine, so its not consistent. I'm also noticing that another file in the event has a totally blurred preview (Its a 24mbs Jpg from a Nikon D800) - not sure if this is at all connected.
The positive news is that my NeoFinder database of drives indicates I should have the 'missing' files on another computer in the office, but I'm still scratching my head on this.

Same old message - no solution! "this iphone cannot be used because the apple mobile device service is not started"

Hello all,
This driving me crazy - I have done it all - read through every forum and post - inculding all here. None of them resolves my issue...
The details:
Iphone - 4 - with IOS 5.0.1 (not the 4S)
itunes version 10.5.2 64bit
Laptop - running Windows 7 home premium 64bit
(and just in case) - running Norton 360 with firewall settings for all iphone programs set to 'allways' I assume this is better than auto (yes I tried both)
I've done the lot - reset the services , start / stopped them, automatic etc etc. no joy - as soon as i plug the phone in via USB the same old message:
"this iphone cannot be used because the apple mobile device service is not started" driving me mad.
Itunes will not recognize it as a device etc. nothing - PLEASE HELP....

If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista or Windows 7
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.

When I plug my iPod touch into computer it says "this Ipod cannot be used because the Apple mobile device service has not started

When I plug my iPod touch ino the computer it says "this ipod cannot be used because the Apple mobile device service has not been started. The screen shows to plug it into itunes and will not do anything.

Have a look here:
iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

I am unable to sync with my computer, I get a message ; This iphone cannot be used because the Apple Mobile Device service is not started.e

I am all of a sudden unable to sync my iphone with my computer. I get the following error message: This iphone cannot be used because The Apple Mobile Device service is not started.

my iphone with my computer
Windows?
Instructions here > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

REP-1352: The fonts specified for this report cannot be found for the char

Similar Messages

Maybe you are looking for