REP-52251: Cannot get output of job ID 69 you requested ....
OS: Oracle As 10.1.2.0.2 (rel 2 for Linux 86)
I have moved my forms and reports from windows XP (DS 9.04) to the Linux box.
I have compiled and run FORMS and most of the REPORTS succesfully.
I have compiled one report succesufully.
But when I run this report from the FORM, I got message as below:
Error
REP-52251: Cannot get output of job ID 69 you requested on Thu Sep 29 15:37:03 PDT 2005.<P>REP-56093: Cached output for job 69 is no longer valid
I have checked
http://abc:7778/reports/rwservlet/showjobs?
Status is as follows:
Error
Finished successfully but output is voided
Regards,
DN
Just in case someone else too finds this thread with google. We had too REP-56093: Cached output for job 5429 is no longer valid. After checking reports cache dir we did see that the problematic reports have cache key with (broken)umlauds. So we disabled :DESNAME parameter and that got rid the umlauds in file names and that resolved the cache error. So if you get this error, you might check the cache directory if the problematic reports have some weird cache files/filenames.
Similar Messages
-
REP-52251: Cannot get output of job ID
Hi,
I am trying to call a report from oracle form and i am getting this error
REP-52251: Cannot get output of job ID 220 you requested on Mon Oct 16 11:19:12 EDT 2006.
REP-56033: Job 220 does not exist
please help, any Ideas.
Best regards,Have you tried to create an URL with all the parameters you're trying to run your report with?
Try to run the report that way first - just to make sure your report can actually be run with the parameters you're using.
If that works then try to use WEB.show_document from your form, passing the same URL you just built, if that works then you are only having problems with your RUN_REPORT_OBJECT (I am not sure if you're using rp2rro library for running your reports).
Try that -- another thing that might be happening is that your output is being generated but due to the parameters (I think there is some form of timeout in the reports server, when the files in your cache are deleted, not sure if this is the problem).
Try the run the report with an URL first - that should shed some light.
If you're still having problems, post it here, so we can review it. -
REP-52251 Cannot get output of job ID -2
When Trying to Run a Report Getting This Error and only one person is getting this error as there are around 1000 + customers for whom the application is
working fine and can generate the Report.
REP-52251: Cannot get output of job ID -2 you requested on Wed Nov 29 11:49:41 EST 2006.<P>REP-56033: Job -2 does not exist
Does somebody ever faced this kind of problem. if so pls share the idea of how to deal with this issue.
Thanks
Anil.Hi,
I am not sure about the error message!!. The possible case is the user might have change his oracle password... like with spaces or %20 (eg. emq K96 is kind of password In web automatically this will be turned into emq%k96,
. As per the report server the password is wrong while the user submit the job.This error won't occur while user connecting to the Oracle forms. But in the report server thru URL user trying to submitting the details.!!!).
One of my user have this kind problem!!!>
He is able to connect the forms but while he submit the job either he got the page cannot found error/ Report submission error.
This case is applicable only if you are using Oracle web forms/ reports.
This may be helpfull to you!!!
Cheers,
Nats -
RWCGI Get Job Ouput - Cannot Get Output of Job ID
I am sending a Record Group from Forms to Report. Html is not generated.
However normal query based Report with parameters from Form to Report is functioning well.
Is there any other alternative or different approach for sending Record Group to Report ?
Would appreciate your assistance.
Furnished below are the parameters used in Form:
pl_id := Get_Parameter_List('TMPDATA');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('TMPDATA');
Add_Parameter(pl_id,'POL_DATA', DATA_PARAMETER, 'POL_DATA');
Add_Parameter(pl_id,'PARAMFORM', TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id,'MAXIMIZE', TEXT_PARAMETER, 'YES');
Add_Parameter(pl_id,'QTNID', TEXT_PARAMETER, :QtnId);
Add_Parameter(pl_id,'PRN_LANG', TEXT_PARAMETER, :PRN_LANG);
lv_repid:= FIND_REPORT_OBJECT('POL1');
SET_REPORT_OBJECT_PROPERTY (lv_repid,REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY (lv_repid, REPORT_COMM_MODE , SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY (lv_repid, REPORT_DESTYPE , Preview);
SET_REPORT_OBJECT_PROPERTY (lv_repid, REPORT_DESFORMAT , 'HTMLCSS');
SET_REPORT_OBJECT_PROPERTY (lv_repid, REPORT_SERVER , 'REP60_IT-DS2');
lv_report := RUN_REPORT_OBJECT ('Pol1', pl_id );
Web.show_document('/dev60cgi/rwcgi60/getjobid='||substr(lv_report,14)||'?server=REP60_IT-DS2','_BLANK');
Note :- Developing Web Application, using Forms 6i & Reports 6iMohammed,
Data parameters are not supported with the Reports Server (using the run_report_object call). You could populate a table and base the report off that.
Hope this helps,
Danny -
hi, i have just upgraded to the i phone 5 from the 4s, i have done a back up and transfrerred all content to my i phone 5 but cannot get apps to transfer how do you do this please?
Apps are not part of the backup. You need to sync them to the iPhone from iTunes on your computer or re-download them from the iTunes Store. For the latter option, see:
http://support.apple.com/kb/ht2519
Regards. -
I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out. -
Hello,
I'm trying to get the job output in my program usibg publisher's web service as follows, but the history list is always returned empty.
Thank You
String sessionToken = myPort.login(username, password);
String jobId = myPort.scheduleReportInSession(scheduleReq, sessionToken);
List<JobHistoryInfo> jHistory = myPort.getScheduledReportHistoryInfoInSession(jobId,
sessionToken,
"Administrator", "All",
true);I am having the same issue using C#.Net to consume the web service. It's a problem with JobHistoryInfo class being parsed improperly. I believe the issue is on the BI side w/ the returning XML.
The issue also occurs with getScheduleReportInto(), and I was able to get around that by intercepting the cast from object to JobHistoryInfo, and convert it to XmlNode[]. However, that method doesn't work with JobHistoryInfo since it's always returned as an array.
I currently have a ticket open w/ Oracle regarding this. -
iPhone 6 (iOS 8.1.2) My wife and I were able to log into iCloud when we bought and activated the phones. In the last 2 days, we have not been able to do so. Have reset the password 3 times. Can get into iTunes and iCloud via MacBook Pro. Every attempt to log in via iPhone we get a message saying the password is incorrect. I noticed someone else had a similar problem about 1 hour ago. Apple support's answer did not fix the problem for them.
have you managed to fix that? i'm facing the same issue on iPhone 6 (8.1.3)
-
I cannot update my update my apps that were transferred to the I-4 nor can I purchase any items because it show my old email ([email protected] ) as my user name and I do not know how to change it to my new address [email protected] .Please advise!
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID. -
how can I "x" out of what is on firefox. The picture fills the whole screen & I cannot find the "x" in the upper right hand corner.
You may be in Full Screen Mode. The F11 key toggles Full Screen Mode on or off.
*See --> http://kb.mozillazine.org/Netbooks#Full_screen
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Dear All,
I have calling report in oralce developer forms 10g using run report object. I have also call report server now there are problem that are coming for this regard is : -
*REP-52251: Cannot get output of job ID 31 you requested on Mon Oct 06 09:46:12 GMT+05:00 2008.
REP-51026: No output for job 31
Kindly any suggestion or help about this error.
Thanks and Best Regards,can you provide the url you called the report with?
-
Dear All,
I have calling report in oralce developer forms 10g using run report object. I have also call report server now there are problem that are coming for this regard is : -
*REP-52251: Cannot get output of job ID 31 you requested on Mon Oct 06 09:46:12 GMT+05:00 2008.
REP-51026: No output for job 31
Kindly any suggestion or help about this error.
Thanks and Best Regards,this is a good question for the Reports-Forum : Reports
-
Windows XP
Oracle 9.2.0.1.0 Database
Oracle Developer Suite 10.1.0.4.0
I am calling Report from Form
using this code in when button press
Declare
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('SCH_A');
ADD_PARAMETER(pl_id,'DD1', text_parameter,:button.dd1);
ADD_PARAMETER(pl_id,'Bankcode', text_parameter,:Button.bankcode);
ADD_PARAMETER(pl_id,'Bankname', text_parameter,:Button.bankname);
ADD_PARAMETER(pl_id,'Balance', text_parameter,:Button.balance);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'F:\Reports');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
-- SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'html');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'my_server');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('my_server') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=my_server';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END;When report run and open report windows shows this error
REP-52251: Cannot get output of job ID 9 you requested on Sat Sep 17 09:58:14 GMT 2011.<P>REP-51026: No output for job 9how can I resolve this
regardsHello,
"Execute" the URL : http://server:port/reports/rwservlet?server=<Reports Server Name>
Check if you can see the job number returned by RUN_REPORT_OBJECT
Refresh the page several times and check if the output is always the same.
(There is a known issue with the In-process Reports Servers and multicast)
Regards -
dear all,
i'm calling a report from a form it first displays a message says: unable to run report:41214 then in the browser it says:
REP-52251 cannot get output of job id 0 ... <REP-56033>job does not exists..
any help will be appreciated cuz all the reports have same problem1) Are you able to run reports from servlet ?
http://host:port/reports/rwservlet?report=test.rdf .....server=server_name
(This is to take forms out of the picture)
2) Post the forms code which you are using to run report here. Let us see if there is anything wrong
3) What is the reports version you are using
6i, 9i, 10g ?
4) Ensure that the server is up
5) Refer the
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
There is a troubleshooting section here. Also check whether you are following all steps
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
--------------------------------------------------------------------------------- -
Cannot get Excel Report to display on Internet Explorer
Hi,
We have an issue with displaying Excel reports on IE on some client machines. A window just pops up and closes. The reports run fine on Firefox and I was able to run it on IE earlier. I had this report working before on all application servers. Now I cannot get output on browser from dev. and test app servers after a small fix in the report. But I can still run the production version.
Note that I can get the Excel output when I use 'getjobid' from an url :
http://server:port/reports/rwservlet/getjobid1887?server=xxx&mimetype=application/vnd.ms-excel
This is the code to output the report:
SHOWDOCINFO :='/reports/rwservlet/getjobid'||JOBID||'?server='||REPORTSERVER||'&mimetype=application/vnd.ms-excel';
The funny thing is my colleague can run the report on his pc without any problem. Is there some issue with the browser setting ?Yes. I use WEB.SHOW_DOCUMENT in the calling form. The window that pops up is an IE window. Yes we both use IE 7.0.
I noticed today that if I uncheck the 'always ask before opening this type of file' on the File Download window, I can get it to work. How do I change this setting?
Maybe you are looking for
-
My camera for my ipod touch is not working
i can click on the camera app but when it comes up the shutter stays closed please help
-
HI gurus, I have fixed the exchange rate as 40 (say) in the PO header. Now when I do Migo after miro, it throws the following error; Enter rate USD / INR rate type B for 06.09.2007 in the system settings Message no. SG105 Diagnosis :For the conversi
-
HI , I have two fact and two dimension tables. D1 is joined to F1 and D2 joined to F2 and i have set as implicit column from F1. I am trying to develop a report from D1 and D2 . We are not getting proper results. But D1 is not joined to F2 and D2 is
-
How to set Maxmimum header length in Web Server. It creates a problem
I have setup Sun webserver ahead of Glassfish Application server. Now when i send a request having length 17000 as POST request , my application does nt receive the whole request data. If i make request direct to Application server , app server servs
-
RFC Proxy generation - redistribution of runtime jars
Hello I've generated java proxies for some RFC function modules with the help of the NetWeaver Developer Studio and they seem to work OK. I used the following libraries for the generation: From plugins\com.sap.ide.jcb.core\lib\ aii_proxy_rt.jar aii_u