REP-6102: Failed to start the XML parser.
I have this project that was started using the Reports Wizard, however using a very simplified query. Then I've applied quite a lot of PL/SQL code to pre-process the report data. Eventually everything works fine, and the only thing remaining is to properly format the output. Then I save the project as a JSP, or RDF, or XML, and quits Reports all together.
The next time I open the project everything seems fine Thus I employ the Wizard to format the reports' output, and saves the project again. And quits the application.
The next time I open the project I receive one of two messages; 'REP-6102: Failed to start the XML parser', or 'REP-0002: Unable to retrieve a string from the Report Builder message file'. Then Reports crashes!!!!
This means I cannot complete the report as I'm unable to save and retrieve a completed report. I've tried this with several reports, all with the same result. I've even unstalled all Oracle-sw on my PC and re-installed it several times.
I'm running WinXP, Oracle 9I DS with patch 9.0.2.1 applied.
Hello Lasse,
I think you are hitting a known issue, could you please call Support to get the status of this problem.
Regards
Tugdual
Similar Messages
-
Attempt to process file failed with Exception in XML Parser-format problem
Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karunHi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1 -
WARNING: Failed to validate the xml content
Hi,
We notice this error when we start the web logic admin console and also in many of Hyperion log files. There are many instances of this error and everything is pointing to different lines in this file “jps-config.xml”.
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.a: Invalid content was found starting with element 'serviceInstance'. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":serviceInstance}' is expected.
Location: line 378 column 91 of file:/D:/Oracle/Middleware/user_projects/domains/EPMSystem/config/fmwconfig/mbeans/../jps-config.xml.
Oct 16, 2012 4:21:56 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
Any ideas?
Regards,
Ragav.
Edited by: ragavhere on Oct 17, 2012 2:04 PMHi,
can you please provide more details on your application?
Which version of ADF are you using and which server. Are you trying to deploy on GlassFish server?
Which IDE are you using?
Perhaps this will be useful:
https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to
Regards,
Dimitrios. -
Error: The XML parser encountered an error in your deployment descriptor. P
Hi,
I am very new to weblogi. I wrote a ejb in eclipse with xDoclet. When I deploy the ejb, Im getting this error:
<b>Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 5 Module: SessionLessEjb Error: [EJB:011025]The XML parser encountered an error in your deployment descriptor. Please ensure that your DOCTYPE is correct. You may wish to compare your deployment descriptors with the WebLogic Server examples to ensure the format is correct. The error was: XML document does not appear to contain a properly formed DOCTYPE header. </b>
Im using weblogic 8.1.5
In the deployment descriptor I have this DOCTYPE as
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.5 EJB//EN" "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">
Can someone help me pls?
Thanks.Hai James this the response I am getting can you please tell what should I write inside ora:getNodeValue() to get the value of node <genReturnText>
The drag and dropping the variable name is not working, I have to write the path manually but I dont know how.
<ns1:getRoutingAndFrameJumpersResponse xmlns:ns1="com.NetworkInstallations">
-<com.GetRoutingAndFrameJumpersOutput>
<destination>
SW
</destination>
<e2EData>
busProcOriginator
</e2EData>
<genReturnCode>
40777
</genReturnCode>
<genReturnText>
EMW_Get_Routing_And_FrameJumpers_Succeeded
</genReturnText>
<supplCode>
ISY002
</supplCode>
<supplText>
Transaction successfully completed.
</supplText>
<severityCode>
S
</severityCode>
<retriable>
false
</retriable>
</com.GetRoutingAndFrameJumpersOutput>
</ns1:getRoutingAndFrameJumpersResponse> -
HOW TO: Use the XML parser in Oracle 8.1.7
I am trying to figure out how to use the xml parser provided in oracle 8.1.7. all i want to do is parse a xml report that is defined using a schema, and place the data into the proper tables. i am totally unfamiliar with the xml parser and how it works. i have done some reading on the subject, but seem to be getting some conflicting infromation about which utilites i need and how to invoke them. can someone please tell me what utilities i need, how to invoke them, and what i need to do to get a xml document to parse and insert to a table? I would greatly appreciate any help anybody could offer. thanks.
You can parse the XML Document with XML Parser and place the data into database using XSU(XML SQL Utility).
Both of these are included in XDK for Java at:
http://otn.oracle.com/tech/xml/xdk_java
The following document could also help:
Oracle9i XML Developer's Guide--XDK [PDF] at http://otn.oracle.com/tech/xml/doc.html -
Unable to import Thesaurus in SharePoint 2013 - Failed to start the flow
I am having issue with importing Thesaurus into SharePoint 2013. I have tried with seed file on local and remote server without success. On ULS stack, it lists "Cannot start flow. The admin service is unavailable". But if
I retrieve status of search topology, it lists admin components (running on two app server) are active. Any idea how this could be resolved or direction I can head to?
This is what I have tried :
PS C:\Users\user> $sa = Get-SPEnterpriseSearchServiceApplication
PS C:\Users\user> Import-SPEnterpriseSearchThesaurus -SearchApplication $sa -FileName \\server_name\testThesaurus.csv
+ CategoryInfo : ResourceUnavailable: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus],
InvalidOperationException
+ FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
On ULS I get the following entries:
CtsConnection.StartFlow: Failed to start the flow: Microsoft.ThesaurusDeployment. Exception: System.ServiceModel.FaultException: Cannot start flow. The admin service is unavailable. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Ceres.ContentEngine.Services.ContentIntegrationEngine.IContentIntegrationEngineManagementAgent.ExecuteFlow(String name, FlowEvaluationConfig config)
at Microsoft.Ceres.ContentEngine.ComponentClient.CtsConnection.StartFlow(String flowName, IDictionary`2 parameters)
MK SinHi,
Please check if it is related to the primary search host controller, make sure it is enabled for the farm, then check results again.
$searchApp = Get-SPEnterpriseSearchServiceApplication
Get-SPEnterpriseSearchLinguisticComponentsStatus -SearchApplication $searchApp
Get-SPEnterpriseSearchHostcontroller
Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename \\sp\custom_thesaurus.csv
Thanks
Daniel Yang
TechNet Community Support -
Hi all,
Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
it would seem
some people have had relates to editing the VMX configuration file and adding the line
hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
Any help would be greatly appreciated.
Many thanks in advance.
JamesThe hypervisor event log message is generated only at boot - so this would be expected. Also vmbus should not be running on the host (I was looking at a VM yesterday)... This error message is generated only when the vid is determined not to be
running or cannot communicate with the hypervisor.
I have seen this due to anti-virus software in the past or due to driver verifier being configured. Since it looks like you checked driver verifier already do you have anti-virus software installed? If so have you followed the best practices
and exempted the Hyper-v services?
http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
Custom virtual machine configuration directories
Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
Custom virtual hard disk drive directories
Custom replication data directories, if you are using Hyper-V Replica
Snapshot directories
Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
-Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb -
I fail to start the sap server with error:Operating system call recv failed
I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c 7883] -
Javax.resource.ResourceException: Failed to start the connection
I have created the JMS bridge in Weblogic10.0 to connect with MQ server, I am getting error when startingup the weblogic server. Below the error
####<28-Mar-2009 10:56:25 o'clock GMT> <Info> <MessagingBridge> <clx25ao02> <aauat100-02> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238237785804> <BEA-200042> <Bridge MQ_TO_JMS_1 failed to connect to the source destination and will try again in 20 seconds. This could be a temporary condition unless the messages repeat several times. (javax.resource.ResourceException: Failed to start the connection)>
I deployed the JMS adaptor also in weblogic10.0.
Could you please tell me the reason for the error?A problem occurred with a Messaging Bridge between two JMS topics running in two Managed
Servers in the same domain, running on the same machine. As the Messaging Bridge was being
started during WebLogic Server startup, it threw the following warning message. Messages
could not be forwarded.
Analysis revealed that the bridge failed to create the message listener because it was
configured for durable topics and there was no JMS store available. The Bridge encountered an
internal error when trying to log the resource exception so the customer was not able to tell
why the bridge was failing.
The problem was resolved by a code change to allow the bridge to throw the correct resource
exception. Now, the correct exception is logged by the bridge. -
Error: The XML parser encountered an Error
Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error.
I am a beginning portal developer and need help identifying what is causing this error. I have gone into navigator, clicked the provider tab then clicked on the provider that I wanted to work with and got the above error. Can anyone tell me what is wrong.Please try posting your question to the Oracle Portal Development Kit (PDK) forum.
null -
Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine
I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick -
hi,
this is malli,
i got below error while installing grid software in rac.
os versin redhat 11inux 5.5
oracle 11gr2 cluster rac
thanks in advance....please do needful
Failed to start the Clusterware. Last 20 lines of the alert log follow:
2014-12-24 01:05:40.100
[client(3850)]CRS-2101:The OLR was formatted using version 3.
2014-12-24 01:05:41.923
[client(3852)]CRS-2317:Fatal error: cannot get local GPnP security keys (wallet).
2014-12-24 01:05:41.923
[client(3852)]CRS-2316:Fatal error: cannot initialize GPnP, CLSGPNP_ERR (Generic GPnP error).
2014-12-24 01:05:41.954
[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.
Have you looked in this log file to see why the OCR is inaccessible? Have you looked in the ASM instance's alert log for other clues?
Cheers,
Brian -
Failed to start the SASL connection (every 10 minutes)
I have been recently seeing the following console message at 10 minute intervals:
8/23/12 8:46:44.368 AM Mail: [<_LibSasl2SASLClient: 0x7fd1cbe048f0> mechanism: PLAIN security layer: no] Failed to start the SASL connection
SASL(-1): generic failure:
I use Apple mail connected to a Verizon FIOS internet account using SSL for both incoming (port 995) and outgoing (port 465) per Verizon requirements. Mail does work fine in both directions, just the annoying log messages every 10 minutes.
Any ideas?, thanks in advance
LarryI just began searching the same message. Mail has been taking a little while to quit. The message you referred to seemed to be triggered about the time Mail was quiting. Along with this one:
9/2/12 9:03:15.900 PM Mail: [<_LibSasl2SASLClient: 0x7f8c02597300> mechanism: CRAM-MD5 security layer: no] Failed a step of SASL authentication
SASL(-1): generic failure: -
Error creating ASComponent oid1,Cause:Failed to start the componentAction
Hi,
On 64-bit Windows-7 machine, I have installed Oracle DB (11.1.1.5.0), RCU (11.1.1.5.0),
Weblogic Server (10.3.5.0) and then I was trying to install Oracle IDM (11.1.1.5.0).
During IDM installation, I selected the option "Install and Configure".
Installation set up is successful.
But it failed while configuring Oracle Identity Management Components - step2 - Start Oracle Internet Directory - Failed.
Error :
Error creating ASComponent oid1.
Cause:
An internal operation has failed: Failed to start the componentAction
Logs:
[OOB IDM CONFIG EVENT] onConfigurationError -> set RETRY ExecutionResponse..
E:\Oracle\Middleware\Oracle_IDM2 E:\Oracle\Middleware\asinst_1 asinst_1
oracle.as.config.ProvisionException: Failed to start the component
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
oracle.as.provisioning.util.ConfigException:
创建 ASComponent oid1 时出错。
Cause: 内部操作失败: Failed to start the componentAction: 有关详细信息, 请查看日志。
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.config.ProvisionException: Failed to start the component
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
... 15 more
progress in calculate progress50Hi,
Please try
"Error Creating ASComponent Oid1" Error During OID Configuration When Installing OID11g (Doc ID 1427253.1) that should resolve the issue. -
Thesaurus update failed - Failed to start the flow
Hi,
I have been updating the thesaurus file many times in the past months via PowerShell. I updated the file a few times in the same day. Then all of a sudden I get:
Import-SPEnterpriseSearchThesaurus : Failed to start the flow: Microsoct.ThesaurusDeployment.
At location of my file...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnt
erpriseSearchThesaurus], CommunicationException
+ FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
Has anyone encountered this problem?
Thanks,
MikeI've got the same issue right now. the commands i am running are:
$searchApp = Get-SPEnterpriseSearchServiceApplication
Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename
\\klpssp01\spthesaurus\spthesaurus.csv
the path to the csv is right. I'm just trying to test this out, so my csv looks like this:
Key,Synonym,Language
apples,red delicious
apples,granny smith
apples,honeycrisp
broccoli,yucky
Broccoli,gross
Here is the error I get:
Import-SPEnterpriseSearchThesaurus : Failed to start the flow:
Microsoft.ThesaurusDeployment.
At line:1 char:1
+ Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename
\\klp ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Offic...aurusDictionary:
ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus], Communica
tionException
+ FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThes
aurusDictionary
Maybe you are looking for
-
Can I recover data from an internal hard drive that I removed from my MB Pro?
A few months back my HD failed on my MB pro. I have since then replaced this HD with a SSHD. My question is can I recover this data from the old hard drive? I remember when I was at the Genius Bar one of the techs told me there was a company I cou
-
The readOutLoud tool is not working why is this happening?
i need help using this tool, the reading tool, when i try to activate it in the VIEW menu, and then selecting "read only this page" only generates an error or the program shut down. i have installed already the complemet for reading but its still
-
Hi again all! I would like to change of transition type. There is just one type of transition for appearence of a component, is it possible to do like on Microsoft PowerPoint (for example) with a chekckerboard transition, for example. Thank you for y
-
What are CREATOR and REGISTRAR in the V$ARCHIVED_LOG view?
Environment: Oracle 11.2.0.3 EE on Solaris 10.5 I'm not sure exactly where this question belongs since it deals with database processes, RMAN and Data Guard all in one so I'll start here and see where it takes me. I have a Data Guard environment set
-
Using a pdf-template for generating an interactive form
Hi guys, I have got the following problem. I have got an pdf-Document, that can be printed out and filled out manually. Instead of I just want to use this pdf-Document as an template for an online form, by adding some fields. How can I use this pdf-D