Repair_packages and --standard-pkgs

Hi Community,
the manpage of repair_packages list an argument --standard-pkgs and --list-standard-pkgs respectively. So I only have the option to specify a package id (a package name) or to add the argument --standard-pkgs to add the standard packages to the list of packages to verify/repair.
But when I determine the standard packages with the argument --list-standard-pkgs, I get a relative short list only with Apple packages. Does it means that this list are the only packages who become verified or repaired by the repair_packages utility? Irrespective the other receipts of third party pkgs in /var/db/receipts?
I thought that the repair_packages command verify and repair the permission for each installed package who have a bom-file stored in /var/db/receipts which contains the item permissions. But the manpage of repair_packages sounds like that in fact only Apple packages, respectively the packages listed in --list-standard-pkgs are affected by the repair_packages command - nothing more.
Mac OS 10.6.4
Thanks in advance

prontosystems wrote:
I thought that the repair_packages command verify and repair the permission for each installed package who have a bom-file stored in /var/db/receipts which contains the item permissions. But the manpage of repair_packages sounds like that in fact only Apple packages, respectively the packages listed in --list-standard-pkgs are affected by the repair_packages command - nothing more.
That seems to be correct. You can manually repair a specific 3rd party package.

Similar Messages

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

    Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
    -Kevin P.
    Message Edited by Kevin Price on 12-01-2006 02:42 PM
    Attachments:
    Binning example.vi ‏51 KB
    Binning example.png ‏12 KB

  • Sapscript and Standard Text - Polish Characters not printing

    Hi,
    I have created an English Sapscript and translated it to Polish via transaction SE76.
    Changing my PC Region and Language settings to Polish allowed me to enter Polish Characters into Hardcoded text in the Sapscript and Standard Text via s010.
    I have two problems:
    1) With my PC Region and Language settings set to Polish, when I create my sapscript output some of the polish characters that I have entered via SE76 and SO10 do not appear and are replaced by others e.g.
    ę is dispalyed as ê
    ć is displayed as æ
    ń is displazed as #
    2) I have a business requirement to be in England Logged with PC Region and Language set to English but to print a sapscript output in Polish. Is this possible.
    We are currently on non unicode SAP system.
    Please can anyone advise.
    Regards

    Hello,
    SAP discourages mixed code page or MDMP systems and with good reason. If there is any possibility of you upgrading to a Unicode system in the near future you should try to wait for it. Supporting multiple languages in Unicode is easy, in MDMP it can be quite tricky. And MDMP makes the move to Unicode more difficult.
    That said, your BASIS team can enable Polish and you can print in Polish while your PC is set for English. The SAPScript/Form must be in Polish or using an INCLUDE that is LANGUAGE 'PL' to let SAP know which code page to use when printing.
    Seriously, look at moving to Unicode, you need to do it eventually anyways.
    Michael

  • Choice between UPK in-application help and standard EBS help

    Hi,
    We are on a EBS 11.5.10 project, implementing UPK.
    We got UPK in-application help working; changed custom.pll, set the profile option, everything fine.
    Now we would like the users to have the choice between UPK help (default) and standard EBS help.
    Therefore we opened the In-Application Support Player Configuration, and created a new Tab:
    Type: Oracle E-Business Suite help
    Tab Text: EBS help
    URL: ?
    Whatever we put in the URL, it won’t display the standard EBS context sensitive help. We can see the ‘EBS help’ tab when selecting ‘window help’ in the application but the page is blank or shows an error message.
    Do you have any tips on how to get this working?
    Thanks,
    Abe de Beer
    EBS Financials consultant
    Oracle Belgium

    Hi,
    I have the exact same requirtment, Could you please give the step what you have done so that it would be helpfull. Also after publishing the content on the i am not seeing the "Application Option" i am seeing the smart help. do we need to configure on "Application Option" or on smart help. Where ever is see the doc it says configure oracle_gateway.html but i dont see oracle/hemi folder at all. do know if there is a set up that has to be done to get this option (UPK 11.10.1)
    Thanks

  • Customized and Standard Report

    How we can differentiate between Customize and Standard report???

    Hi Mike
    thats a tough one, the PO generation is a bit restrictive to say the least when it comes to customizing. It sounds like you have worked out how to get your own template in there to render the PO.
    On the data front, all I can think of is to customize and replace the seeded PO view with one that incorporates your extra data.
    Or, get into the page customization world and write your own extract and format concurrent program/procedure and then hook it onto the buttons where you want to launch it.
    You might have more luch, response wise from the EBS PO forum.
    Procurement : Procurement
    OAF: OA Framework
    Regards
    Tim

  • Customer Statement using SAP Script and Standard print program RFKORD10

    Using sap script and standard print program RFKORD10 I need to create a customer statement where the main window will be as follows
    Invoice #     InvoiceDate  CustomerPO  Debit Amt  Credit Amt  Total
        6        7           8               9               10               11
        6        7           8               9               10               11
                                     Totals               12             13              14
    Where company code BKORM-KUKRS
                Invoice              BSID-BELNR
                Invoice date      BSID-BLDAT
                Customer PO    VBKD-BSTKD
    For each document number selected there will be one to many records in VBRP.  For each invoice item in VBRP:
    u2022     Select BSTKD from VBKD where
    o     VBELN = VBRP-VGBEL and
    o     POSNR = VBRP-VGPOS
    u2022     If no hits then select BSTKD from VBKD where
    o     VBELN = VBRP-VGBEL
    If there is more than one PO per invoice then list them in the Customer PO field without repeating the other fields.PO shouldnu2019t come more than once per invoice.
                 Debit Amt         if BSEG-SHKZG = S then WRBTR ELSE 0
                 Credit Amt        if BSEG-SHKZG = H then WRBTR ELSE 0
                 Total                  Debit Amt u2013 Credit Amt
                  Totals                Subtotals
    It will be of great help if some one can help me with the script and the alterations required in standard print program RFKORD10
    Points will b rewarded for sure.
    Thanks.

    Hi Suganya,
    The custom form is getting displayed properly. But the requirement is to have it as an editable PDF. So the functional team is working on configuring the settings of PDF forms with customers email address.
    But for right now, i customized the standard form F140_ACC_STAT_01 and standard print program RFKORD10_PDF and did the configuration. It is getting displayed (I tested only with the transaction FBL5N - customer open line items..)
    Please let me know any further details on this.
    Poornima

  • Hi how to debug the stand form and standard program of credit demo......

    hi , i could find find the credit memo in FI standard form and standard program at the given path
    SPRO->IMG->Financial Accounting->Accounts Receivable & Accounts Payable->Customer Accounts->Line Items->Correspondence->Carry out and check settings for correspondence->define Form Names for corresponding print> here u can c ur program along with the Form assigned to it...
    I copied the standard form to z form and assigned to standard program, now to know the elements in a write form which are triggered , i need to apply breakpoint in standard program and run the application to view the elements.. But , to apply breakpoints in the standard program, no form routine is given...Then how to identify where to apply breakpoints to identify the elements....
    i will be very thankfull for the reply..
    thanks..

    Hi,
        Activate debugger as above for FORM, or copy the Standard print program name and open it in SE38 in display mode, Look for OPEN_FORM or WRITE_FORM fm in the Main print program and put break point. when you run the application it will stop at the break point.
    Regards
    Bala Krishna

  • Expense report and Standard Invoice in ap.

    hi
    Difference b/w Expense report and Standard Invoice in ap. plz give me example
    thks

    Hi,
    AFAIK Oracle EBS does not keep that sort of info. When looking for the payment you may know that both documents were included in that payment. But when looking at the the invoice or at the DR/CR Memo you will not see any cross reference between them.
    Octavio

  • Difference jb/w text symblosin script and standard text in scripts

    hi to all
    can u pols explain about the
    difference b/w text symblos in script and standard text in scripts

    hi
    Default paragraph Paragraph set to * in <b>standard text</b> maintenance
    If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: • Use the <b>standard text</b> maintenance to enter and print the text.
    Any kind of text can be included in a form. If no object is specified, then TEXT will be used (<b>standard texts</b>).
    <b>
    Text Symbols</b>
    Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include &#61614; Symbols &#61614; Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
    /: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
    /: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
    /: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
    Inserting <b>Text Symbols</b>
    Procedure
    Inserting a Text Symbol
    1. Choose Insert &#8594; Symbols &#8594; Text.
    2. Place the cursor on the desired text symbol.
    3. Choose Choose.
    4. The system inserts the text symbol.
    Editing the Value of a Text Symbol
    1. Choose Insert &#8594; Symbols &#8594; Text.
    2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
    3. Enter the appropriate value definition.
    4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
    5. Choose Continue.
    Deleting all Text Symbol Values
    1. Choose Insert &#8594; Symbols &#8594; Text.
    2. Choose Delete all values. The system deletes all defined values.
    3. Choose Continue.
    Using Formatting Options for Text Symbols
    1. Choose Insert &#8594; Symbols &#8594; Text.
    2. Choose Options. The dialog window Formatting options for <text symbol> appears.
    3. Fill in the fields.
    4. Choose Continue.
    5. Choose Continue. The system executes the selected formatting option.
    regards
    ravish
    <b>plz reward points if helpful</b>

  • View source code of UDF's and Standard Functions

    Hi Friends,
    Is it possible to view the source code written in the UDF's and Standard Functions.
    If possible please enlighten me.
    Thanks,
    Swapna.

    Hi,
    I dont think u can view the src code for Standard function but try this.
    While holding down "ctrl" + "shift" + "0" key click on the standard function.See if u can export it and check for some src
    code
    Regards,
    Shabari

  • Re: tracing execution and standard Forte messagefilters

    Pierre,
    There is a tech note describing some of the trace flags that will show
    you interpreter profile information. This interface, the information
    produced, etc. may change in future releases that's why it's a tech
    note and not in the documentation set.
    Hope this helps,
    Bobby
    This note describes how to use the execution profile collector built into
    the Tool Interpreter.
    NOTE: THIS INTERFACE IS UNSUPPORTED BUT IS MADE AVAILABLE AS IS TO USERS
    UNTIL A SUPPORTED INSTANCE OF THE FEATURE EXISTS.
    THE SUPPORTED VERSION WILL HAVE A DIFFERENT FUNCTIONALITY AND FORM.
    The Tool Interpreter contains an execution profile data collector. The
    collection
    information can be displayed as trace output or the raw data can be collected
    by the program for further manipulation and display. This information
    describes the current level of support available. It is possible that this
    mechanism will be updated in future releases and/or integrated into the
    TOOL debugger.
    The profiler only counts intructions executed in the interpreter, it doesn't
    account for time spent in C++ code. However it is sill useful in finding
    problems in interpreted code and for viewing the dynamic call flow of the
    application.
    The following trace information is available:
    TRACE CALL-RETURN
    This trace outputs a single indented line for each method call and
    another single line for each method return. The line is indented an
    amount equal to the call depth of the task calling the method. The
    following information is displayed:
    Task Id
    Task Name
    Method Name
    Method Instruction Count
    Task(Id=5,Name=InitialLom)Method(Name=Forte.TopClass.StartUp)
    Task(Id=5,Name=InitialLom)Method(Instructions=10)
    This is enabled using trace setting trc:in:50:1.
    This trace can also be used to see the control flow of an application.
    TRACE TASK BY METHOD
    This trace outputs information about a task and all of the methods that
    where called during it's execution. Each method contains information
    about the number of times that the method was called and the total
    number of instructions consumed by the methods execution. The task
    contains the totals of all calls and instructions performed by the
    task. The methods are sorted in descending order of instructions
    executed.
    The following in an example of the output:
    TaskByMethod(Id=9,Name=projws.display,Instructions=2212)
    ide.projws.updateMenus(Called=1,Instuctions=556)
    ide.projws.addBlockComponentsToTree(Called=1,Instuctions=321)
    ide.projwsPrefs.LoadPrefs(Called=1,Instuctions=247)
    ide.projwsPrefs.Apply(Called=1,Instuctions=206)
    UtilsDisplay.PrefMgr.FetchUserPref(Called=12,Instuctions=168)
    ide.projws.computeWindowSize(Called=1,Instuctions=168)
    ide.projws.refreshBrowser(Called=1,Instuctions=76)
    UtilsBase.CompileSession.SetScope(Called=1,Instuctions=68)
    ide.projws.fillToolObjTree(Called=1,Instuctions=65)
    ide.projws.setTitle(Called=1,Instuctions=53)
    UtilsBase.CompileSession.Init(Called=1,Instuctions=48)
    UtilsBase.InterfaceBrokerBase.GetCompileSession(Called=1,Instuctions=41)
    UtilsBase.InterfaceBrokerBase.LockSession(Called=1,Instuctions=30)
    AppModel.abSurrogateRepositoryClient.GetRepository(Called=3,Instuctions=21)
    UtilsBase.InterfaceBrokerBase.UnlockSession(Called=1,Instuctions=20)
    UtilsDisplay.Workshop.Events(Called=1,Instuctions=20)
    UtilsDisplay.Workshop.HelpEvents(Called=1,Instuctions=19)
    ide.projws.lookupMask(Called=1,Instuctions=17)
    UtilsBase.CompileSession.GetVersionStateForPlan(Called=1,Instuctions=14)
    ide.projws.LoadPrefs(Called=1,Instuctions=13)
    AppModel.abSurrogateRepositoryClient.GetVersionStateForPlan(Called=1,Instuct
    ions=8)
    AppModel.abSurrogateRepositoryClient.FindProject(Called=1,Instuctions=8)
    ide.projws.resetCurrentNode(Called=1,Instuctions=7)
    AppModel.abSurrogateRepositoryClient.IsDetached(Called=1,Instuctions=7)
    ide.projws.selectComponent(Called=1,Instuctions=6)
    ide.projwsPrefs.Init(Called=1,Instuctions=5)
    This is enabled using trace setting trc:in:51:1.
    TRACE APP BY METHOD
    This trace outputs information about an application and all of the
    methods that were called during its execution. Each method contains
    information about the number of times that the method was called and
    the total number of instructions consumed by the methods execution.
    The application contains the totals of all calls and instructions
    performed by the task.
    The output is similar to the previous case.
    This is enabled using trace setting trc:in:53:1.
    TRACE TASK BY CALLTREE
    This trace outputs the call tree of the task. The call tree shows a
    method and all of the methods that it called. And for each of the
    called methods the same output is displayed. This can be used to
    see more of the call structure of a task. It call also be used to
    find the paths in the call tree that consumed most of the instructions.
    The methods are sorted in descending order of instructions executed
    within each level of the call tree.
    TRACE APP BY CALLTREE
    This trace outputs the call tree of the application. The call tree
    shows a method and all of the methods that it called. And for each of
    the called methods the same output is displayed. This can be used to
    see more of the call structure of an application. It call also be used
    to find the paths in the call tree that consumed most of the
    instructions.
    The output is similar to the previous case.
    This is enabled using trace setting trc:in:54:1.
    The following collected information is available:
    NOTE: None of the collection options are available at this time.
    COLLECT TASK BY METHOD
    COLLECT APP BY METHOD
    COLLECT TASK BY CALLTREE
    COLLECT APP BY CALLTREE
    Other potential future features:
    The profiler doesn't record when some interpreted TOOL code invokes a method
    on a object which in implemented in C++. This causes some profile
    information to be lost. If the C++ code invokes a method that is
    implemented as interpreted TOOL the BYCALLTREE profile will not show the
    C++ code. Thus it could be confusing because it appears that the
    interpreted code called something totally different than the what is
    expected.
    At 10:41 AM 7/31/96, Pierre Gelli wrote:
    Hello,
    During the process of tuning an application, or just of making it work, it
    is useful to trace the flow of processing.
    There are two ways of doing it :
    1) add your own trace instructions (calls to the LogMgr) at the appropriate
    places,
    2) use the traces of the Forte Interpreter !
    If one relies on solution 1, then it relies on what the developers have
    written (and thus sometime forgotten to write !) in their code.
    If one relies on solution 2, then potentially it can get as much information
    as is available to the interpreter (and the debugger ?), in a fully
    independant way since it uses directly the code itself and not added trace
    instructions.
    So solution 2 seems quite interesting.
    Unfortunately there are some potential problems :
    a) I haven't found in the documentation an exhaustive description of the
    logs the Forte tools do. The only and very short description is on page 148
    of the System management Guide. It's far from being exhaustive. So it
    requires playing with the filters.
    I recommand trying trc:in:1-63. I guess "in" stands for the interpreter.
    - level 1 seems to give the call tree,
    - level 255 seems to give almost the code !
    b) since the flags are not documented by Forte, how reliable and stable will
    they be in future versions ?
    c) what happens for compiled partitions is not clear to me (I have not tried
    it yet).
    So my question : are the message filters used by the Forte Tools like the
    interpreter described somewhere, i.e. in some Tech Note (I don't have access
    to them yet) ?
    best regards,
    Pierre Gelli
    ADP GSI
    Payroll and Human Resources Management
    72-78, Grande Rue, F-92310 SEVRES
    phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
    fax : +33 1 41 14 85 99

    From: Pierre Gelli <[email protected]>
    Subject: tracing execution and standard Forte message filters
    Hello,
    During the process of tuning an application, or just of making it work, it
    is useful to trace the flow of processing.
    There are two ways of doing it :
    1) add your own trace instructions (calls to the LogMgr) at the appropriate
    places,
    2) use the traces of the Forte Interpreter !
    So solution 2 seems quite interesting.
    Unfortunately there are some potential problems :
    a) I haven't found in the documentation an exhaustive description of the
    logs the Forte tools do. The only and very short description is on page 148
    of the System management Guide. It's far from being exhaustive. So it
    requires playing with the filters.
    I recommand trying trc:in:1-63. I guess "in" stands for the interpreter.
    - level 1 seems to give the call tree,
    - level 255 seems to give almost the code !
    b) since the flags are not documented by Forte, how reliable and stable will
    they be in future versions ?
    Pierre Gelli,
    level 255 is the most detailed you are right on tracing..... As for documentation
    you will want to get ahold of several good tech notes that your Forte
    rep or support can get you which provide alot of the info you are after.
    Let me know if you can't do this and I can send you some of this info, but you are
    best to get the latest and greatest directly from Forte.
    Len Leber
    ATG Partners

  • In an inbuild example of can .. that CAN transmit periodic vi .. i am unable to understand how the extended and standard frame is set?

    In an inbuild example of can .. that CAN transmit  periodic vi .. i am unable to understand how the extended and standard frame is set?
    plz help me .. stuck up very badly
    thanks
    mahadev
    Solved!
    Go to Solution.

    I suggest this KB which explains usage of Ext IDs with NI-CAN
    http://digital.ni.com/public.nsf/allkb/2FA120A37EDBC51D86256854004FB0C7

  • SDK support in Pro and Standard editions.

    Hi,
    I want to convert PDF file into DOCX programatically. I have written the code using Acrobat SDK and tried with Acrobat X Pro trial version, and it works fine. I just want to confirm whether Acrobat X Standard edition supports exporting PDF to DOCX via SDK? and whether my code will work in Standard edition.
    Also, want to know whether there are any differences between Pro and Standard editions in terms of SDK support.
    With regards,
    Pinakin Purandare

    Hi,
    Apologies for missing the code.
    Below is the code:
                AcroPDDoc pdDocument = new AcroPDDocClass();
                if (pdDocument != null)
                    try
                        // Open PDF file.
                        result = pdDocument.Open(location);
                        if (result)
                            // If PDF file is opened then get the docx file name.
                            string docxFileName = string.Concat(Path.GetFileNameWithoutExtension(location), ".docx");
                            docxFileName = Path.Combine(Path.GetFullPath(tempPath), docxFileName);
                            try
                                object jsObject = pdDocument.GetJSObject();
                                Type type = jsObject.GetType();
                                type.InvokeMember("saveAs", BindingFlags.InvokeMethod, null, jsObject,
                                    new object[] { docxFileName, "com.adobe.acrobat.docx" });
                            finally
                                pdDocument.Close();
                                pdDocument = null;
                    finally
                        pdDocument = null;
    I have gone through the feature list of Standard edition on Acrobat site and it mentions that it has feature of exporting it to Word. But since I was not able to find trial version of standard version, I am not able to test the code.
    I want to make the decision on buying the edition based on the export to DOCX feature programatically. Hence wanted to confirm.
    With regards,
    Pinakin Purandare

  • Moving average and standard price both maintained

    Hi,
    I have maintained both moving average price and standard price in material master, price control is V
    is there any impact of standard price any where in the system.
    Regards,
    Ali

    Hi,
    The system considers only the price maintained in price control V or S.So Which ever price is maintained it will consider only that. As an example if you maintain price control as S and give standard price, So when you do GR against PO with different prices, You can see that system even calculates moving avg price for statistical purpose and same can be seen in material master. For for the transaction purpose only standard price will be considered.
    Regards,
    Atal

Maybe you are looking for