Repeate Message after RuntimeException in Message-Mapping transformation

Hello Experts,
I have a mapping defined with a UDF. In the mapping editor the tests were successfull but in the reale world - of course not
Now I have a message in the Integration Server with red flag because of
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /LIST/S_UNB/S_UNH/G_SSG18/S_GID/C_C213/D_7224. The message is: Exception:[java.lang.NumberFormatException: For input string: "__cC_"]
I've located the error in the UDF and want to repeate the message with the new mapping. But again the same error although the test in the mapping tool (with the original payload) was successfull.
It must be possible to repeate those messages but how?
Thanks a lot.
Christian

This was a little bit strange. But after the import, the version of the mapping in PROD was different from TEST.
I've changed the description Field of the Mapping in Test, activated the version and did the export/import again. Now the versions were the same and after repeating the message everything is o.k.
THANKS ALL FOR YOUR HELP!
Christian

Similar Messages

Error message after sending text message

I keep getting an error message after I send off a text. It says that the number is invalid and that i have to enter the entire 10 digit number, so at this point i go back to the contact list and ensure that i have the area cose as well. I re-send and get the same message.
can anyone help??

There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems. It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

Automatically Cancel Message after error detected in Mapping

Hello experts,
I have a message mapping that does some validation on data from sender (file) and if not valid, the mapping errors out as I generate an alert. Production support then manually cancels the message from SXMB_MONI.
My question is: Is there a way to cancel the message automatically as soon as the alert is generated instead of the additional manual step for Production support personnel to do it.
Thanks
JB

Hi,
>any person looking at this thread would have expected you to respond to the issue/problem discussed,
in case you didn't notice I gave you the best answer I got - "it's not possible in standard" - short, maybe sad but true - all the rest is development
which is possible and you can do EVERYTHING with it as you may or may not know
>speculate on which name or nickname appeared on it
don't know if you noticed but in case you didn't I'm a moderator of this forum
so I try to keep it both: 1) clean and 2) healthy which means:
1) if there is someone who's is affraid to tell his own name it means two things for me:
a) either he/she was blocked on forums and come back with a different name
b) is so highly valued prof (in his mind) that wishes not to show his real name
as others might find out that he/she does not know something
in both cases I'm always very carefull with such forum members
(only as a moderator) as I cannot expect anything good from it
which is actually true in your case as you don't expect our forum
*rules of engagement * for example:
Step 4: Thank Others by Giving Points
and you never gave points .... none of your
34 questions was ever awarded by you with even one point
so who is playing fair ?
2)
if someone who has a funny nick cannot understand a little joke
then I honestly don't care and it has nothing to do with my arrogance
>your response shows your prejudiced approach and a sense of arrogance.
please, let other people who read this judge on that, ok?
and let's not continue this anymore
anyway good luck in your attitudes too
Regards,
Michal Krawczyk

MESSAGE AFTER DOQUERY?

If the doQuery returns nothing, how can I return a message to the user?
I have been able to add custom messages for insert, update and delete by adding pl/sql code to the package but the same logic wouldn't work for Query.
Anybody has any idear on how to work around this issue?

Hi Antonio,
you could define a new subscription to everyone and send message after a new message posted.
Yoav

Message Mapping error: RuntimeException in Message-Mapping transformation

Hi,
Being new to XI, I am struglling to sort out a basic mapping error. Appreciate if you could help out.
Its an File->XI->R/3 scenario.
My FCC successfully reads the File and creates an XML. However this XML is not transferred to the target XML structure which is exactly same except the root element name is different at top.
I tried various forum tips but I still am getting the error.
( When I Test the Message mapping in test mode..it seems fine, however if I copy the XML from SXMB_MONI, it then throws the above error)
I looked at the MM in text mode: below is the extract
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/SOURCE=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/SOURCE=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/DESTINATION=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/DESTINATION=
/ns0:MT_REQUEST_TO_SAP/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=/ns0:MT_REQUEST/REQUEST_DETAILS/MSG_HEADER/MESSAGE_ID=
As seen the name space in both starts with nS0 and end of each line has '=' sign. Is that ok.
I have run out of options and dont know , whats the problem. Please help.
The target and Source XML structures are exactly same as shown below
MT_REQUEST                                 MT_REQUEST_TO_SAP
   |__MSG_HEADER                            |__MSG_HEADER
     |__SOURCE                                |__SOURCE
     |__DESTINATION                           |__DESTINATION
     |__MESSAGE_ID                            |__MESSAGE_ID
And the SXMB_MONI Trace shows the following error
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation:
Cannot produce target element /ns0:MT_REQUEST_TO_SAP.
Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at ..
Thanks
Shirin
Edited by: Shirin K on May 29, 2008 10:29 AM

Hi Prakasu,
As structure are exactly same, I have done 1:1 mapping. So all the fields in target structure are mapped, so no field has beeen left.
In this structure, I do not have any 1:n relation. So 1:1 mapping should be fine.
Apart from this could teher be any other reason.
Regards
Rajiv

JDBC Sender Error "RuntimeException in Message-Mapping transformation"

Hi All,
I have JDBC as sender and i am able to poll the data from the database,which is available in SXMB_MONI but its giving an error "RuntimeException in Message-Mapping transformation".I have tested the mapping in TEST and its working fine but when i tested the same in configuration its throwing an error in Interface mapping(<NOT FOUND>).
I have also created a node <b>row</b> in my sender data type.
Expecting your help soon.
Thanks and regards,
Zabi.

Hi,
Check the data coming inside..the XI... that is before mapping..
Regards
Agasthuri Doss

RuntimeException in Message-Mapping transformation: Runtime exception durin

Hi Friends,
Iam going test Message Mapping, i got the error like
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:LeapIndent_R3_MT/Recordset/RowData/QTY_TNS. The message is: Exception:[java.lang.NumberFormatException: empty String] in class com.sap.aii.mappingtool.flib3.Arithm method formatNumber[, com.sap.aii.mappingtool.tf3.rt.Context@27f972cf]
Pls help me ..
Thanks & Regards,
Nvr

Hi Ravi,
Thanks for ur reply, the problem is solved, the Date field is Mandaratory, they are not mention the data field, so that way the problem is coming.
Thanks & Regards,
NVR

RuntimeException in Message-Mapping transformation: -- Message Status 14

Dear ALL Experts
Messages are failed and showing the "RuntimeException in Message-Mapping transformation: Cannot produce target element "
also Message Status are showing as 14. Need to know few details such as,
1> Where we can check the exact error ?
2> Where we can check the error log file ?
3> What will be the possiable reason behind this failer ?
4> how can we resolve the same ?
Thanks and Regards
Machindra Patade

Messages are failed and showing the "RuntimeException in Message-Mapping transformation:
Cannot produce target element "
The mapping logic applied is not able to produce the target element with the sorresponding Source payload.
Check if the payload (which you see in SXMB_MONI) is able to execute the mapping (Message/ Interface Mapping --> Test) successfully.
you can even refer page-191 from this guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000702797&_OBJECT=011000358700000063822008E
S-userid required to view the above document....the method is the same for SAP XI/ PI 7.0/ 7.1
Regards,
Abhishek.

How can i test after creating Message mapping transformations

Hi guys,
How can i test my transformation after creation of message mapping in Integration Repository.
Pleae expain step by step procedure
Thanks & Regards.,
Pushparaju.B

Hi,
1. If you just want to test the mapping --In message Mapping there are three tab, the second one being hte Test tAb. So u can pu the values in the left side XML and do test.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/content.htm
2. You can do the Testing from Interface mapping also. There is a Test tab there too.
3. If you have created the whole scnerio then you can do testing from Integration directory:
http://help.sap.com/saphelp_nw04/helpdata/en/6b/874a4273bb3830e10000000a155106/content.htm
Regards
Vijaya

RuntimeException in Message-Mapping transformation

Hi all,
          I am doing a soap2rfc scenario in that i have 2 message mappings are there
    there are SUM1_MM and SUM2_MM
Message mapping test(SUM1_MM)
Source test
<?xml version="1.0" encoding="UTF-8"?>
<ns0:SUMOUT_MT xmlns:ns0="urn://web2rfcsum">
   <NUM1>12</NUM1>
   <NUM2>13</NUM2>
</ns0:SUMOUT_MT>
target result
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ZSUM2NUMBERS xmlns:ns1="urn:sap-com:document:sap:rfc:functions"><NUM1>12</NUM1><NUM2>13</NUM2></ns1:ZSUM2NUMBERS>
But i have seen an error in sxmb_moni
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_SUM1_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_SUM1_MM_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
Please solve the problem your help is memorable

Hi Deviprasad,
It looks like a mapping error, test your mapping in IR with the payload from SXMB_MONI. You can refer michal's weblog on <a href="/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios to test your mapping (in real life scenarios)</a>
In other words you copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
Regards,
Abhy

Run time error during message mapping transformation

Hello,
i created a scenario and tried to execute . i got this error .
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
can any one tel me wats going wrong ??

The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache.

UK E-Filing: Message Mapping Transformation

Hello Everyone,
Just curious to know if anyone has seen this error while working on E-Filing for the UK, while trying to send data to the Inland Revenue:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start
Helpful, readable, and easy to understand reponses which provide a resolution to this issue, will be rewarded accordingly.
Thanks for your help!
John

Hi John,
1) Your problem is related to Message mapping only.
2) This type of error means in mapping you have context problem. Some where your context is mismatched for IRenvelope node.
3) Take your runtime xml and check directly in message mapping.
4) Your output instances for IRenvelope is more than its occurances.
5) Try by using RemoveContext function before your target node.
Regards Rohit,
Reward points if helpful

Access a received message after transformation

Hi,
in my BPM,
i am receiving an Idoc
transfor it
make a BAPI Call.
this works fine.
After this i want to transform the BAPI-response and
the original IDoc to a new message for the next BAPI-Call.
But i have no data in this original IDOC.
I created an transformationstep which has 2 source
Messages and 1 target messege. But the Data from the
IDoc message is empty.
Could anybody give me a hint where to find the error?
THX
Benjamin

Hi Benjamin,
take a look at this document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to monitor integration processes ccbpm.pdf
open the technical log for your BPM
and find out when your IDOC data gets deleted
>>> transformationstep which has 2 source
Messages and 1 target messege. But the Data from the
IDoc message is empty.
are you sure your mapping is correct?
try pasting the IDOC and BAPI-response
from sxmb_moni (right click - save as file)
and check if it gives the desired result
BTW
this souldn't happen - normally idoc should have the data till the end of the process unless you delete it
Regards,
michal

Error in Message-Mapping transformation

I'm getting an error while processing the data from JDBC to SAP through IDOC's.
During the application mapping com/sap/xi/tf/_MM_HRMD_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
while testing the mapping in IR (message mapping) it got succesfull.
while testing the mapping in ID (Test configaration) with inbound payload we are getting the below error.
interface Mapping
... (173 lines)
Please provide the solution for this...

Hello,
Check out the trace thorougly in MONI as at which node/field the error is occuring.
W.r.t ID testing,kindly check your interface determination(sender,receiver parameters and also the inbound interface etc)
Regards
Madhu

RuntimeException in Message-Mapping

Hello Experts,
I developed a message mapping and then posted an IDOCfrom ED1/020 to XD1 there occured an error stating :-
"During the application mapping com/sap/xi/tf/_MM_DESADV_DELVRY03_TO_BPCS_ERROR_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException w
as thrown: RuntimeException in Message-Mapping transformatio~"
Exception of class CX_XMS_SYSERR_MAPPING
this is what the performance assistance has to say.
So what shall i do? kindly suggest.
Thanks
Prat

Prat,
Check this thread
IDOC Mapping ; Error CX_XMS_SYSERR_MAPPING
In Sxmb_moni - check the trace for more information.
Cheers
Agasthuri

Repeate Message after RuntimeException in Message-Mapping transformation

Similar Messages

Maybe you are looking for