Repeated pages at the end of each chapter on Ibooks

I have downloaded 2 books to both my Ipad and my Iphone. On my Iphone the last 5-8 pages of each chapter repeat.  This problem is not on my Ipad.  What can I do????

Same thing is happening to me!  I read on my iphone during the day at work and then have to go back and read the pages i missed on my ipad when i get home (my ipad to too big to pull out in my cubicle...lol!).  Here is the only response I got...simply delete and re-download it, and see if that fixes the issue.  I'm going to give it a try...right after I finish this chapter!  Good luck!

Similar Messages

  • TS1702 Hi,  I downloaded Wild to my Ipad and I'm having issues.  I've only read the first few chapters but at the end of each chapter the last page is duplicated for 10 pages and then it goes to the next chapter.

    I downloaded Wild to my Ipad and I'm having issues.  I've only read the first few chapters but at the end of each chapter the last page is duplicated for 10 pages and then it goes to the next chapter.

    Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or ... Delete the book and download it again in the purchased tab of the iBook Store, as long as you use the same Apple ID, there is no charge to download it again.

  • My iBook has a blank page at the beginning of each chapter. How do I delete?

    I have a blank page offset to the left at the beginning of each chapter. How do I delete them?

    The first selectable template is "Basic"...  the  template - and any others have placeholder text and images excepting pages "Default" and Blank.  The "Default" page accepts flowing text. "Blank" is just that with only any BG image and page numbering decided in the template.
    Nothing  you describe seems to be part of just opening a standard template.
    Below are screen shots from the  book tree and  the layouts - these are the "Basic" template pages without any modifications.
    Any of the pages  shown in the tree can be deleted. Chapter and Sections will also delete any pages added under them.

  • How to remove the thick line at the end of each page of my report

    Please how do I remove the thick line that appears at the end of each page of my report anytime I publish the report unto the Web.

    Bring up the property inspector against the report object. In here you will see the settings for HTML output. Remove the entry against the "After Page Value" property.

  • Remove the extra space at the end of each page in the report

    Hi,
    When the RDF report output is seen in notepad, it shows empty lines at the end of each page. Is it possble to avoid these empty lines and display the output without any empty lines.
    Thanks in advance.
    Divya

    In the headers and footers of table/loop nodes, use event "at page break" on condition tab. Read some documentation like [Printing Data in a Table|http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/0b/e06b192d8411d5b693006094192fe3/frameset.htm]
    Regards,
    Raymond

  • When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off. Is there any solution?

    When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off.
    I'm very sure my printer is set cirrectly.
    Can't Firefox shrink to fit when I want to print a selected area of web pages?
    This has never occurred in IE.

    File >Page Setup -- check your margins, I have set size to 85% which is probably left over from some problem. Also check your printer that it is correctly set to the size of the paper.

  • Blank Page at the end of generated PDF Document

    Hi,
    my problem is that ADS is generating a blank page at the end of my report.
    I fill the ADS with a template and an XML stream.
    The XML stream contains multiple orders. Each order has several detail data. It is a requirement that every order object has to appear at a new page.
    XML structure:
    - Order
    -- Group1
    --- fields of Group1
    -- Group2
    --- Fields of Group2
    My template looks like this:
    - body page subform: Order  (Default binding: $record.Order[*]; Repeat Subform for Each Data Item: yes; After: Go To Next Page)
    -- subform1
    --- fields of subform1
    -- subform2
    --- fields of subform2
    Because of the "Go To Next Page" at the Order subform a new page is rendered each time an order ends. This leads to the blank page after the last order is processed.
    Does anyone know how I can suppress the blank page at the end of the document?

    You may use a forum for xsl fo.

  • Hyperlinks from my MSWord files suddenly don't work because "/FirefoxHTML\Shell\Open\Command" has somehow been added to the end of each URL.

    When I click to open the hyperlink in my Word file, the message I get in Firefox is "The requested URL /submissions.htmlFirefoxHTML\Shell\Open\Command was not found on this server." When I delete that portion of the URL, the website opens fine. What can I do to make the hyperlinks work properly?

    Thanks for the suggestion. I tried it, but it didn't work. The link information is written correctly on the MSWord page. But when I click on it and the Firefox tab opens, the page can't be found because "FirefoxHTML\Shell\Open\Command" has been added to the end of each URL. Might it help if I reset Firefox?

  • I am editing an idvd slideshow to have some of the music selections from itunes fade out at the end of each vacation segment using music reflecting the country visited.  Is there a way to fast-forward the slideshow to observe the where the music ends.

    I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment.  Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly?  (without repeatedly clicking the forward button on the e-remote) 

    Thanks very much, varjak paw.  I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over.  They all show the same location:
    Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
    What does this mean relative to the music which didn't copy? Is there another step?  or somewhere else I should look?
    And wow, thanks for the info about not having legal right to keep the tracks from the CDs.  I am embarrassed that I didn't know.  I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac?  (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
    Or do I still need to remove all that music from my library?
    Thank you again for your help. 
    C.

  • How to avoid printing a balnk page at the end in the Adobe form output

    Hello Experts,
        Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
    I have a master page with header n footer and a body page seperate.
    For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
    "after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
    Can someone guide me as how to solve this problem.
    Any help is appreciated. Thanks in advance.
    Regards,
    Mahesh

    hey mahesh,
    this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to  initial or space).
    This can be handled by doing the following
    By knowing the number of line items by the following stmt.
    describe table itab lines v_lines.
    Now you have the value in v_lines.
    use a counter in ur form and keep it increasing it by 1  ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
    ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
    this should be along with the condition which u have already put, ie when ever line item no changes
    when both these conditions are satisfied , then only the new page will be triggered.
    Hope it helps,
    Reward if useful,
    Regards,
    KP.

  • Implementing multiple page size requirement - extra blank page at the end

    My XMLP report requirement is as follows.
    - The report is printing a bunch of lines.
    - Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
    - The first page needs to be printed on Legal size paper
    - Subsequent pages (IF NEEDED) need to be printed on Letter size paper
    So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
    Here is a sample XML data:
    <REPORT>
    <LIST_G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>1</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>2</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    <G_PAGE_NUMBER>
    <PAGE_NUMBER>3</PAGE_NUMBER>
    <LIST_G_LINE>
         <G_LINE>...</G_LINE>
         <G_LINE>...</G_LINE>
    </LIST_G_LINE>
    </G_PAGE_NUMBER>
    </LIST_G_PAGE_NUMBER>
    </REPORT>
    For this, I created 2-pages RTF template and using the Word Page Setup feature:
    1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
    The first page has the following XMLP tag:
    <?for-each: G_PAGE_NUMBER?>
    <?if: PAGE_NUMBER=1?><?call:body?><?end if?>
    <?end for-each?>
    <?template:body?>
    for-each loop that prints lines in a tabular format
    <?end template?>
    2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
    <?for-each: G_PAGE_NUMBER?>
    <?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
    <?end for-each?>
    It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
    I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
    Thank you!

    Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

  • How to avoid printing an additional blank page at the end of the report

    I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
    The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
    REP-0801: Layout canvas must remain large enough to fit all layout objects
    Can anyone tell me how to handle this?

    Hi,
    I too faced similar prob.
    But when i made the After Page Value property of the report as blank it removed the blank page for me .
    Try this and let me know whether it has helped you.
    Regards
    Srinivas Pusa

  • Problem with a blank page at the end.

    Hi,
    I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
    It was created by somebody earlier... and i need to fix this bug.
    Any solutions..?
    Thanks in advance.
    KK
    Message was edited by:
    KK28

    Hi
    there are a number of hits on Metalink for this...
    Subject:      Extra Page Shown At The End Of A Web Report
         Doc ID:      Note:172426.1      Type:      PROBLEM
         Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
    * fact: Oracle Reports Developer 6.0.5
    * fact: Solaris Operating System (SPARC)
    * fact: Microsoft Internet Explorer
    * fact: Adobe Acrobat
    * fact: OAS
    * symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
    * symptom: Only happens on one report
    * symptom: Using Times New Roman
    * symptom: Client/Server configuration works successfully
    * change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
    * cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
    fix:
    Use the Report Builder on Unix to make fine adjustments in the layout to
    improve the HTML output.
    -----x------------------
    Subject:      How to set the number of rows per page dynamically in a report
         Doc ID:      Note:122714.1      Type:      SCRIPT
         Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
    PURPOSE
    This article shows how to set the number of rows per page dynamically according
    to the user parameter specified.
    INSTRUCTIONS
    Follow these steps:
    1. In the Object Navigator under Data Model-->User Parameters, create an user
    parameter P_1 -- this parameter specifies the number of rows you want to
    print per page
    datatype: number.
    2. In the Data Model Editor, create the query and the layout according to your
    requirements.
    Let's assume that we have the following:
    Q_1: Select empno, deptno ename from emp
    order by deptno, ename
    G_1 has the columns empno, deptno, ename
    3. In the Data Model Editor, create the following summary columns:
    CS_numrow will be numbering the rows within the detail group
    (created within G_1).
    Set the following parameters:
    Name: CS_numrow
    Function: count
    Source: <any column that does not accept nulls> for instance, empno
    Reset at: Report
    CS_total_rows will calculate the total of rows retrieved
    (created at the report level)
    Set the following parameters:
    Name: CS_total_rows
    Function: count
    Source: <any column that does not accept nulls> for instance, empno
    Reset at: Report
    4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
    frame, below the fields empno, deptno, and ename. You may have to stretch
    the existing frames to be able to fit this in.
    F_enmpno F_deptno F_ename
    --------------------------------------------- <<<< create the group
    frame here
    5. Set the properties for the Group Frame M_1 as follows:
    Print condition: First
    Object: Enclosing Object
    Sizing:
    Vertical: variable
    Horizontal: fixed
    Check the box "Page Break before".
    6. Create a Format trigger for this frame M_1 as follows:
    function M_1FormatTrigger return boolean is
    /* prints until a row number is product of P_1 */
    /* if row number is 5 and P_1 = 5, MOD is 0 */
    /* then it prints the frame, doing a page break */
    begin
    if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
    if mod(:CS_numrow,:P_1) = 0 then
    return (TRUE);
    else
    return(false);
    end if;
    else
    return (false);
    end if;
    end;
    NOTE: This assumes that the report is tabular. If you have a break group, this
    logic can be applied for the detail group.
    REFERENCES
    Information in this article was taken from Oracle Sample Code @ Repository
    Entry #956. In order to request the binary (rdf file or .sql script), please
    log a TAR via Metalink requesting Oracle Sample Code #956
    CAUTION
    The sample program in this article is provided for educational purposes only
    and is NOT supported by Oracle Support Services. It has been tested
    internally, however, and works as documented. We do not guarantee that it
    will work for you, so be sure to test it in your environment before relying
    on it.
    -------x-------------
    the list goes on...
    Hope this helps

  • Search for the end of each text frame?

    I'd like to insert some kind of marker at the end of each of my text frames in order to preserve where the page breaks occur, even after I've exported my file. The only function in InDesign that seems to recognize pages is the text variables that can pull the first/last instance of something on a page. Other than that, I can find no way of searching for the end of a page or end of a text frame.

    myFrames = app.activeDocument.textFrames;
    myCharStyle = app.activeDocument.characterStyles.itemByName("Marker");
    for (a=0; a<myFrames.length; a++){
         if (myFrames[a].characters.length>0){
              myFrames[a].characters[-1].appliedCharacterStyle = myCharStyle;
    The above script will apply a character style called Marker to the last character of all text frames in the document (prepare a character style called Marker [case-sensitive] before you run the script, or change the name in the second line.
    I guess a character style isn't an ideal solution, though, as it might override something else.
    Perhaps a strikethrough? In which case, change the 5th line to:
    myFrames[a].characters[-1].strikeThru = true;
    Does that help?
    Ariel
    www.FreelanceBookDesign.com
    Message was edited by: Arïel to correct syntax error.

  • [svn:bz-trunk] 5137: Fix failing security tests on BlazeDS/ trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new /clean session.

    Revision: 5137
    Author: [email protected]
    Date: 2009-03-02 10:28:59 -0800 (Mon, 02 Mar 2009)
    Log Message:
    Fix failing security tests on BlazeDS/trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new/clean session. It looks like some test methods were leaving some things in a bad state which was causing the next test that ran to fail. These may be legitimate bugs/issues so we should investigate further to see what sequence of events gets things into a bad state but for these tests we want all of the test methods to run in isolation.
    Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/MessagingAuthProSendTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/JMSAuthSendSubscribeConstraintTest.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/MessagingAuthProSendTest.mxml
    Added Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/qa/messaging/SessionManager.java

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

Maybe you are looking for