Repeating frame over flow into next page

I have a report, on the first page of which I have a repeating frame. On the second I have only different paras of text.
When ever the repeating frame on the first page, returns data more than it can fit on the first page, it is getting printed on the second page. But as a result the text of the second page is being pushed down.
It also creates a gap between the place where the repeating frame data ends and the text of the second page starts. How to avoid this gap.
What is the solution . Please share.

Hi Nag,
Thanx for your question.
1. As you know its difficult to simulate the problem
through a sample report. I would like to know
which version of reports are you using?.
2. I suggest to surround your second repeating frame and the last paragrphs with a normal variable frame.
I mean include the second repeating frame and the last group frame into a variable frame that spans over the two pages. then you should set the "print object on" to "first page" and to "enclosing object"
for all parent frames.
3. if it does not work .Try this one too: To avoid the gap use "Anchor", anchor the last paragraphs frame to the second repeating frame by minimizing the gap between them(See help online about anchoring).
Hope this helps,
CB

Similar Messages

  • Repeating Frame over multiple pages

    How can i streach a repeating frame over more pages without
    getting: REP-1212 Object 'Body' is not fully enclosed by its
    enclosing object ''

    In the object Navigator go to the Section in which this Repeating Frame exists (For example, "Main Section"). Double click to invoke it's property inspector. Increase the "Horizontal Panels per page" or "Vertical Panels per Page" as per your need. By default both will be 1.
    Thanks,
    -Siva B

  • Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

    Pages '09 v4.1
    Problem 1:
         I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
         However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
         On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
         Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
    Problem 2:
         Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
    So there you have it. Christmas is over and its back to work. Thank-you for your attention.

    Regards re-positioning a table:
    I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before -  the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
    Page 1 left side.
    TEXT 1-line as 1-column
    TABLE (5-rows)
    TEXT (2-columns) 14-lines left column and 13-lines right column.
    [Layout Break] otherwise the above textual columns would be all on the left side of the page.
    TEXT 1-line as 1-column
    * The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
    Page 2 right side.
    A 2-page table flowing or breaking into a 3rd page.
    Page 3 left side.
    The overflow of the subject table.
    [Layout Break]
    [Section Break]
    Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

  • How to make text elements flow to next page depending on the table above it in main window (smart forms)

    Hi all,
    In my main window i have a table that contains line item data.
    Just below that i need to display text elemet (some text and terms & conditions).
    as below
    Based on the items in table, it should flow to next page. But it is not happening. rather the data which do not fit into first page gets deleted.
    Please help to solve this. Its urgent.
    Thanks in advance

    Hi Rashmi,
    please drop these texts from your table footer (i hope you have put into footer of your table), just create a template after your table and  put your all these data within this template and make sure that your this
    template should be called after your tables data get displayed.
    Or you can create a text , after your table where you put your data, and it should get displayed when the line items ends for your table.

  • Internal Table data is not overflowing into Next Page -  Adobeforms

    Hi,
         I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
         Here am using Header  only on first page & Table will follows...
    Regards,
    PraVeen..
    Edited by: praveenreddys on Feb 15, 2012 10:51 PM

    Hi praveenreddys ,
    I had the same requirement,  I did as follows:
    LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
    1. table tab: select the check box allow page breaks within content.
    2. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
    3. row tab: select the check box allow page breaks within content.
    4. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    select the check boxes: Include header row in initial page
                                            include header row in subsequent pages
    Binding tab property:
    5.select check box: Repeat row for each data item
    LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
    6. Row tab: DON'T select the chek box allow page breaks with in content
    4. pagination tab: place: Following previous
                                after:continue filling parent
                               overflow: none.
    Binding tab property:
    5.select check box: Repeat row for each data item
    Then test..it would work for you...ALL THE BEST!!!
    If this helps please reward points.
    Reards,
    Naresh.

  • To display vline if main window flows to next page in SAPScript.

    Hello,
    We are facing issue that we have to put vertical line at the end of page , if main window flows to next page.
    In our case, we have payment done for different currencies as well, so that means if for first currency USD we have 20 records then after 16 records page gets break then we want sy-vline to print there and next 4 records in next page, similarily for next currency EUR, then if we have 4 records it gets displayed on one page only, so no vline is required then.
    So like this if we have 3 pages to be displayed then on first page it should displayed vline as records gets overflowed.
    May be in Script we can have more than 3 pages as well, so at different currency when we have more records then only it should show vline, otherwise not.
    Also we have signature window inside main window, so on next page it should not display line after signature.
    So please help us for finding the solution to this issue as its really urgent.
    Thanks.

    Hi friend,
    So as of now you know that the line count for a page is 16.
    So after displaying records in main window just check the sy-index or keep a variable incremental for the loop.
    Check whether the variable count is 16 and put a sy-vline. So if we have less number of records or if we have a signature window the vline wont be executed.
    This will only be executed when there are 16 records for a page. So for better handling you can use the number of lines per page dynamically. Ie to know the size of lines in the page dynamically.
    Else use of end of page command to draw lines at the end of page. But the end of page command should be used inside an if else command.
    See the link below for more options in Scripts Link : [Editing Format Actions|http://help.sap.com/saphelp_nw70/helpdata/en/ce/6f0f82ea6311d18e2f0000e83dd9fc/content.htm]
    I think this solves your issue. Please revert back to me if you face any issues. I will help you.
    Thanks,
    Sri Hari
    Edited by: srihari.kumar on Jan 31, 2012 4:27 PM

  • Table row does not flow to next page

    Hi,
    I am using deep structure table in adobe form but the content is not flowing to next page.
    I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked,  still the table row does not flow to next page.
    Regards,
    Kimaya

    Hi Kimaya,
    Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
    Thanks

  • Voice Over gesture for next page

    Hi All,
    does anyone no the Voice Over gesture for next page in apps like ABC news
    Thanks Beau

    Have you tried to flick with three fingers?
    enjoy your magic machine

  • Elements flowing to next page hides the subsequent elments

    Hi,
    I have 2 subform vertically placed adjacent to each other withing the main subform.
    Subform1(positioned,allow page break,continous filling the previous page,int he content area)
    subform2(flowed)
         textfield1(var length)
         textfiled2(var lenght)
         textfiled3 (filxed length)
         textfield4(fixed length)
    subform3(having textfield with fixed length)(positioned)
    Now my problem is as textfiled1 and textfield2 are of variable length in subform2 so when they hv lot of data that makes form to flow to next page, in this case data flows to next page but hides the textfiled3 and textfield4.
    I am sure this is the problem of the setting of the layout, please suggest something
    Thanks
    Pooja

    Hi,
    Thanks for pdf, yes this is what I was looking for,now one more doubt in this case second vertical form subfor3 shifts to the next page as well, I dont want this to happen, I want this to be remained on the same page only subform2 flows to next page
    OR
    can it possible that content of subform flows in the subform3 side first and then expand to next page, as term and condition page where data is displayed ina pdf form in 2 column layout, when column1 fills till the page end then it flowd first to page1 column 2 side and then flows to page2 column1 . Can this be possible in this case, as out main requirement is to display the term and conditions in the form.
    This would be great help.
    Pooja

  • Make Textfield Flow To Next Page

    Hello,
    I am new to Adobe LiveCycle and my new form is coming along well but one big spot I am lost and confused on is allowing the textfield that contains alot of text force things to drop down to the next page and continue to show. Right now after it goes over to many words, the box cuts off and doesn't show full text.    Everything is pushing down and flowing perfect except to next page functionality.
    below is image of my hierarchy pallete and also image of how form looks once it goes over to many words. Thnx n advance for any help!

    Hey TUndraSteve, yes it is set to allow page breraks within content.

  • Problem when inserting xml flow into jspx page

    When I drag and drop the xml into the jspx I should get a pop up menu where I would choose region (Im following a tutorial) but I get nothing. I drag and drop and It just opens it in the design editor.
    I would appreciate any help you guys could give

    OK, let cover the basics first:
    JDev version?
    I assume you are on 11.1.1.2.0 or 11.1.1.3.0:
    You created a new task flow (right click on the 'Web content'->new->'ADF Task FLow'
    the check box 'Createas Bounden Task flow was set and the check box for 'Create with Page Fragments' was set
    The filename was something like 'search-email-flow.xml'
    This should create a new bounden task flow with the name of search-email-flow (which creates a xml file with the same name).
    Then you put one view to the flow. After creating the page fragment (the file created should have the jsff file type) you saved all work.
    The you open up an existing jspx file and drag the new flow from the 'Page Flows' folder under 'Web content' onto the design view of the jspx file.
    after dropping the flow you should then see the 'Create' dialog. e careful, you can't drop the flow everywhere on the page. You should drop in into a panel group or some other container. If you drop it i.e. onto a table you see the effect you described: it's opening the flow!
    Timo

  • Scrollable frame prevents swipe to next page

    Hello
    Does anybody else find when they create a PDF format for the iPad that scrollable frames don't work as well as in auto format.
    I have placed a large scrollable frame which takes up 3/4 of my page. When I swipe to the next page the scrollable frame wont let me swipe?
    Cheers
    Gemma

    bugs and behaviour like this is a suspicious sign of a wrong architecture,
    too many cooks/programmers ruining the menu (a German spoke word), or
    incomplete testing.
    DPS is a massive complex system.but for these, data models and information
    architecture are critical to success.
    I see movement at adobe here. there are more and more people from adobe
    responding to problems, actually engineering on these forums and more
    concise product management. one can feel that.
    but sometimes, these "funny" things happen... they don't matter to the big
    publishers still on sprint 15 or enterprise level publishers with their own
    track if DPS (visible in the cryptic version number for the WIRED reader
    and others).
    but they matter to the designers, makers, thinkers and people on the
    bleeding edge of DPS actually trying to produce stuff and stumble upon
    these things.
    —Johannes
    (mobil gesendet)

  • How to get header row to flow to next page with table content?

    I am setting up a dynamic form with a series of question/answer tables. 
    Example: 
    Header (Text):  List your accomplishments for the year. 
    Row 1 (Text Field):  Associate types their response to the question above.
    If I type enough text in the response that it flows down to a second page, both the header AND the response box drop down to the second page....ultimately leaving a big white space on Page 1.  I would like for the header to flow to the next page, but only with the 'extra' text that didn't fit on page 1...not ALL of the text.
    Is this possible? 

    I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

  • Dyamic landscape table that flows into portrait page.

    Hi,
    I have a form that transitions from portrait, to landscape, and back to portrait. The landscape pages contain a dynamic table where users can click a button to add rows. I have applied the landscape master page to the landscape pages and the portrait master page to the following pages. The problem is that in the PDF preview, when the landscape table flows onto another page, it renders incorrectly because it is trying to use the portrait page. What do I need to do on the Pagination tab to make the table flow properly to another landscape page?
    Thanks...Jenn

    Hi Sarah,
    Thanks for your response. Unfortunately the pagination tab for the master page does not give me those options. It only gives me the page numbering options. I have applied the pagination option you suggested to the page where I have applied the landscape master page, however, it still flows into a portrait page. Any other suggestions are most welcome.
    Thanks again...Jenn

  • Display line items of the data into next page in case of overflow

    Hi all,
    In my requirement i am displaying header data with its line items  through smart forms ( Landscape format).Since i am using landscape format main window size is less.Hence, In case of overflow of data
    the line items only should get displayed in the next page without the header information.
    I have given next page as Second page and i kept only  main window in the next page. But still it is displaying header information in the next page in case of overflow of data.
    Thanks in Advance
    Regards,
    Bhanu.R

    Hi Bhanu,
    In this case you can go for any one of the below 2 solutions.
    1) Try to use a seperate window(secondary window) for header information and for line items use main window. In second page use only main window. So, when the data overflows you will get only the line items.
    2) Try to use text elements. Give the header information in one text element say T1 and the line items in another text element say T2. And then write WRITE_FORM for text element T2 in a loop to display the line items.
    Hope this will help you.

Maybe you are looking for

  • How do I connect to the internet with a datacard?

    Hi, I have just brought a mac book pro and am in the process of finding an ISP. I don't have a BT line and don't want to pay for one, so it narrows down my options! I have checked out NOW wireless internet and cable but they don't work in my area (NW

  • Yahoo emails not working in iphone 5

    Hi, I have just changed to Iphone 5 and I noticed that my yahoo emails are not working. I cannot save the yahoo password when I set up my yahoo email accounts in Iphone 5. The error message says "Yahoo Server unvailable". Please try again later. I tr

  • Vista laptop no longer works with Google Hangout. I have tried several versions of Firefox from 16 to 19.

    I have an HP DV9000 series laptop. I have used it with Firefox for google hangouts in the past, but with several updates, it no longer works. The built in webcam works with dedicated software but is not detected by the googletalk plugin. I have loade

  • Program to change the Incompletion of order

    Dear All, We executed on Zprogram (Call standard BAPI) to change Profit centers for open orders, but due to some bug  completed orders program changed and removed the plant/shipping point and set incompletion log at item. But Header status is complet

  • How to set the firewall

    Hi every one. I found this code which read the contents of a web page and display them in the output. But the problem with it is that it does not work if there is a firewall in the system. So, what modifications should I do to make it run in existens