Replace KMS server with same-named server

I need to replace my KMS server (win2008r2) with a new server (win2012r2), but with the original server’s name.
 This is my plan:
      Shutdown the current KMS server and remove it from AD, WINS & DNS
      Rename the new server with the old server’s name
      I have already added the VAMT role to the win2k12 server, but not configured it
      Install our KMS VL & run the office 2013 volume license pack on the new server
  Does anyone see any problems with this plan? 
Do I need to uninstall the KMS key from the original server first?
 What kinds of issues will the users see before the 25 client activations happen?
 Thanks!

This is fine.    
KMS is resolved via a DNS Service record: _vlmcs._tcp.<domainname>
Whenever you are finished installing KMS on the new server, ensure the SRV record is correct.
NOTE: Remember the new KMS server will not start to activate clients until the thresholds are met.  (5 servers or 25 clients)
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

Similar Messages

  • Replacing a windows server with a Mac server

    Hi all,
    So this is a big company with about 150 employees using PC's (win xp and 7), considering replacing the current Windows server with a Mac server.
    Is it possible to give users profiles once they log in like Windows server does? So when the user logs in they get to their own personal stuff? Can Mac server do that?
    Can the user also get to the default printer and send prints to it regardless where they log in from inside the company?
    And can the home directory to each user NOT be copied anywhere on the local machine where they log in? Meaning that after they log out there will be no traces to their files on that local PC..
    Thanks a lot in advance!!

    By some standards, 150 is not "big" but a large small business :-)
    Regardless, please plan and test and plan some more, very carefully !
    The picture for what you want to do once looked far better with 10.6 server but that had its limitations as well.
    With 10.6 server, Apple was using Samba - they are no longer doing so,
    but/and the version of Samba they were using only provided NT-Domain level support.
    So that would not work with your Win 7 stations either. But could be made to work relatively well with XP workstations. You can no longer buy any new Mac that runs 10.6 server and 10.6 server would be hard to obtain.
    Not a great route to go.
    Bear in mind that the key problem with Apple's Samba was that Samba changed their licensing,
    and there's not a thing in the world Apple could do to implement a current version of Samba without violating their own operating principles and the licensing requirements.
    You'll be heading into heavily uncharted territory here. Odds are good that any desired domain-functionality is not going to work for you.
    Honestly, Apple appears to have thrown in the towel on directory-level support for Windows,
    and the best way to support Windows workstations in that regard is with Windows server and AD.
    Basic filesharing works, with some caveats.
    If there's no AD involved at all, then have a look at my earlier post,
    https://discussions.apple.com/thread/3206725?start=47
    Which worked a-ok for me but your mileage may vary.
    Samba new current versions and GPL3 licensing issue:
    https://discussions.apple.com/thread/3206725?start=75&tstart=0
    "GPLv3 makes it impossible to provide signed binaries without also providing the signing keys. A few seconds of thought will reveal why Apple is unwilling to provide copies of the keys they use to sign system software. Part of locking down OS X security profile required removing anythign that used GPLv3.
    Short version: GPLv3 is specifially desinged to be anti-company, and you are going to see a ever widening schism in the FSS/OSS community between GPL and all the other licenses, and you will be seeing less and less GPL code in commercial OSes and more BSD/Apache/&c code."
    http://discussions.apple.com/thread.jspa?messageID=12494378

  • Issue listeneing queue from Weblogic Cluster server with multiple managed server

    Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
    Weblogic Cluster structure is like
    Weblogic Cluster01
      --ManagedServer01(http://server01.myhost.com:7001)
      --ManagedServer02(http://server02.myhost.com:7001)
    JMS Servers
      JMSserver01 targeting: ManagedServer01
      JMSserver02 targeting: ManagedServer02
      JMSmodule
      ConnectionFactory01 targeting:JMSserver01,JMSserver02
      UDQueue01 targeting:JMSserver01,JMSserver02
    Uniform Distributed Queue in Monitoring tab showing like this
      mysystemmodule!JMSserver01@UDQueue01
      mysystemmodule!JMSserver02@UDQueue01
    So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
      mysystemmodule!JMSserver01@UDQueue01 10
      mysystemmodule!JMSserver02@UDQueue01 10
    But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
      mysystemmodule!JMSserver01@UDQueue01 0
      mysystemmodule!JMSserver02@UDQueue01 10
    untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
    Solutions that tried
      1) we have tried give both server URL coma sparated in provider URL
    we need to configur same scenario for 5 managed server with 3 listener on other servers.
    Do any one have solution for this.

    You need to have:
    1. Consumers connected to each UDQ member
    OR
    2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
    http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
    For example you can set it to 10 (10s)
    Additional Information here:
    http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
    http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
    How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
    I hope this helps
    Best Regards
    Luz

  • Mail in Mavericks not replacing existing mail with same name

    Mail in Mavericks not replacing existing mail with same name.
    Thanks

    I have the same situation as you - sending out pdfs of designed pages and wanting to overwrite them continually. It used to happen on an older version of Mail, then it disappeared and now it's back with the latest version.
    It's more than annoying, it's downright driving me nuts. In the last hour I had to quit Mail seven times.
    Please send a fix for this Apple.

  • How to work with two different backend with same MI Server and war file

    Hi All,
    We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
    I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
    As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
    Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
    Your help in this regard is highly appreciable.
    Regards
    Murthy

    Hi Murthy,
    I try to get my head around the question:WHY?
    The reason for my question is, that this influences the answer!
    Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
    Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
    So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
    If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
    - First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
    - Change the two files you mentioned above.
    This should be all then.
    If you have a look into the implementation for MAM001Impl for example, there you find a line like:
         private static final String SYNC_BO_NAME
              = ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
    This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
    MAM30_040 = zMAM30_040
    will result in MAM uses the zMAM BOs.
    Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
    AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
    MAM30_040 = MAM30_040
    MAM30_040 = zMAM30_040
    if will only take the first reading.
    But I think this is clear to you anyway
    Regards,
    Oliver

  • Can't Send Mail with Same Outgoing Server

    I have 2 Roadrunner accounts that use the same outgoing smtp server. In order for me to send email (receiving POP email is not a problem), I have to set the outgoing server for port 25, no SSL and no authentication. I can get one of the accounts to work. But, when I try to set up the 2nd roadrunner account with the same settings on the same outgoing server, I get an error from OSX mail telling me the following:
    "Could not save the changes
    The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
    Can someone help me figure out how to get around this? I'd really like to send mail from my accounts.
    Thanks!

    Venom51 wrote:
    I have 2 Roadrunner accounts that use the same outgoing smtp server. In order for me to send email (receiving POP email is not a problem), I have to set the outgoing server for port 25, no SSL and no authentication. I can get one of the accounts to work. But, when I try to set up the 2nd roadrunner account with the same settings on the same outgoing server, I get an error from OSX mail telling me the following:
    "Could not save the changes
    The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
    Welcome to Apple's discussion groups.
    Perhaps I'm missing something, but can't you have both accounts use the same SMTP server? If you're still trying to create the second account using the account creation wizard, I'd try giving it dummy SMTP information, then change it to use the real SMTP server once the account is created.

  • Can't add 2 IMAP accounts with same incoming server

    I'm trying to move all my email accounts from POP to IMAP. Where I have 2 (or more) accounts on the same mail server I can't create the second account - it says the IMAP server will not connect.
    I have tried adding one account then the other. Whichever I add first works and the second always fails.
    Any ideas please?

    Some mail servers are set to only allow a limited number of simultaneous connections from the same IP address. You need to check with admin of the mail server to increase the threshold if that is the case.
    Also the server administrator would able the check system logs to see if there are any login errors.
    I use apple mail and have 3 imap accounts on the same mail server functioning without issue. But I had to change a setting on the mail server to increase the max connections from the same IP. Luckily I administrate my own mail servers.

  • Moving DP Content to a New Server With Same Name

    We are currently in the middle of a server OS refresh from 2k8 to 2k12 R2. Some of the servers are DPs so I need to move the content from one server to another. The big problem is that the new server must have the same name.
    I've read this thread http://social.technet.microsoft.com/Forums/en-US/1ffcaa47-9bf8-476d-965e-28350a6bef1b/move-content-from-old-dp-to-new-dp-at-same-remote-site?forum=configmanagerapps which kind of covers my issue but I presume this person was going to
    a server with a new name.
    Has anyone done this? Is it possible?
    Unless there is something clever the only way I see to do this is to uninstall the DP role from the current server, remove the current server from the domain, add the new server with the same name, re-install the DP role and then re-distribute all the content
    to the new server. I'd rather not do this as the DP is on a remote site so all the content will be going over the WAN.
    I am running SCCM 2012 SP1 CU3.
    Any ideas?

    Hi,
    >>So can I pre-stage from the old server to the new server or does the pre-staging have to be done from the site server?
    Yes, you could prestage content from the old server to the new server. Prestaged content files could be created from Configuration Manager Administrator Console.
    >>What is the order of the process?
    The following blog could help you to prestage content.
    http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • New server with same software allows access to private files

    I purchased a new mac mini with Snow leopard server software and had the Apple Store transfer data from the old server (also Snow leopard) to the new mini. The server only stores files at this time and acts as a Central File Server. Before the transfer, we had individual file folders on the server which were accessible only by the owner of that folder. Now, however, the folders are all open to anyone who has access to the Central File Server. How can I limit access to each one of the six personal folders on our Central FIle Server?

    Check the permissions settings on the folders in Server Admin. My first guess is that the "Others" permissions are set to Read Only or Read and Write.

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

  • Install MS SQL Server Web Edition on a server with MS SQL Server Express

    Hi,
    We have a VPS cloud server on which there is an instance of SQL Server Express.
    Since we need more resources, I consulted with the hosting provider and they offered us to use SQL Server Web Edition (SPLA Lisence).
    My question is - the hosting company claims that it is not possible to keep the SQL Server Express instance along side with the  SQL Server Web Edition, and that we must do ugrade and remove the  SQL Server Express instance.
    This will cause us a long downtime, since there are multiple DBs on the SQL Server Express that we will have to backup, and then restore them one by one on the Web Edition after it is installed.
    Is this correct? Can't we install the SQL Server Web Edition Instance and gradually move the DBs to it?
    Thanks!

    The 50 instances per machine is a setup check rule as opposed to a hardware limitation.  From this perspective, there would be no difference between a VM or a physical server. 
    In the line from the documentation that you referenced, the "stand-alone server" refers not to VM vs. Physical, but instead a stand-alone instance vs. a clustered instance.  That is, in a non-clustered environment, you can have up to 50 instances.
    In the past when I helped with setup testing and automation, we'd run VMs with 20-ish instances, including instances from 2012, 2008 R2, 2008, and 2005, including multiple editions (Enterprise, Standard, Express, Web, etc.).
    One other potential option if your provider cannot support multiple instances is to do an in-place upgrade (edition upgrade) of your existing Express instance.  This would retain the current instance and upgrade the existing instance from Express
    to Web without the need to migrate databases.  Here is more info on the supported version and edition upgrade paths (including Express to Web):
    http://technet.microsoft.com/en-us/library/ms143393.aspx
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

  • Configuring Apache HTTP Server with Oracle Weblogic Server plugin

    Hello friends,
    I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
    Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
    One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
    When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
    Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
    *************************************************log****************************************************
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431>
    ================New Request: [GET /images/cab.gif HTTP/1.1] =================
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
    Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
    Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
    Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
    Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
    secondaryJVMID: [NONE]
    Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
    Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
    initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
    Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
    Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
    Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
    Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
    Server Details are:
    OrigHostInfo [192.168.1.200]
    isOrigHostInfoDNS [0]
    Host [192.168.1.200]
    Port [7002]
    SecurePort [7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
    Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
    Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
    Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
    Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
    Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
    Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
    Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
    Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
    Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
    Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
    Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
    Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3160
    Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
    Thanks

    "One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
    Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
    with server 3 going down it does 1-2-1-2-1...
    An example configuration (with SSL off) looks as follows:
    LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
    <IfModule weblogic_module>
         ConnectTimeoutSecs 10
         ConnectRetrySecs 2
         DebugConfigInfo ON
         WLSocketTimeoutSecs 2
         WLIOTimeoutSecs 300
         Idempotent ON
         FileCaching ON
         KeepAliveSecs 20
         KeepAliveEnabled ON
         DynamicServerList ON
         WLProxySSL OFF
    </IfModule>
    <Location /LoadTest6>
         SetHandler weblogic-handler
         WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
    </Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
    "the plugin sometimes redirects to the other active node"
    This is somewhat strange, do you have session binding turned off?
    "and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
    This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
    and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

  • Problem with Task Aggregation from Project Server with old Project Server permissions mode.

    Hi, I have installed Sharepoint 2013 with all CU, and Project Server 2013 with June CU update. Later, I attached database from old Project Server 2010 database, all was OK, but now I have my PWA with old Project Server permissions mode.
    After that I have created MySite with users from AD of my company, it's OK, but Task Aggregation not working. Moreover, I have not any errors on the MyTask page.
    You can see that I can insert private tasks, but I can not see any tasks from pwa, however I have a lot of tasks there. Please help me.
    My search works well amd WMA Service too.
    Where directly crawler search the tasks? Maybe there are errors in search log with that ulrs?

    Hi,
    did you setup the Work Management Service Application in the Central Administration? If yes, please check if the Applicationpool account of the Work Managment Service has full Access to the User Profile Service Application (over the Ribbon | Permissions).
    Check also if your Projects are published so that you have a Project Workspace for each Project. In the workspaces you should have a list "Tasks" or "Tasks1" for migrated workspaces. This is important because only Tasks from the workspaces' Tasklist are
    shown in the Mysite
    In any other cases please check the ULS Log and/or the Application Event log. Especially have a look to Distributed Cache Service and the Feed Cache.
    Bernhard Fischer [MVP] | www.wodey.de

  • MacBook shows only folder with ?. Replaced hard drive with same results.

    In the midst of some work the machine simply clicked and showed a folder with a ?. Would not restart. Replaced the drive with a new 7200 Seagate momemtum, 320GB, installed the software, and have the same problem with startup. A folder with a ? Connect another machine via firewire and looked at the MacBook drive and it showed the appropriate system folders. Then started the other computer from the MacBooks hard drive and that worked. So the drive appears healthy but we cannot get it started on its own. In Disk Utility the new drive is indicated as not owner enabled, whatever that means. It appears most Macs that work are, in fact, owner enabled. Anybody have a clue what might be going on here? We're thinking maybe the first drive had not failed and the problem lies elsewhere.

    As an FYI, here is the apparent solution. The original drive did fail. Because the disks were in Seattle and we were attempting to fix it in Dallas we connected via Firewire to a PowerPC machine and formatted the drive. That was the crucial error. the G4 did not give the appropriate Intel-based Mac formatting options. So we could look at the drive from the G4 and see everything was there, but the MacBook could not boot itself because it could not read the disk which was improperly formatted. The Genius bar in Seattle figured this out and reformatted the disk at no cost.
    All's well that ends well, but have Macs really become that complicated?

  • Integrate Exchange 2013 server with 2012R2 Essentials server.

    After navigating to %Program Files%\Windows Server\Bin
    I try to run the command:-
    ARRConfig config –cert “path to the certificate file” –hostnames “host names for Exchange Server”–targetserver “server name of Exchange Server”
    But receive the error:-
    "ARRConfig" is not recognised as an internal or external command, operable program or batch file.

    Hi,
    -->After navigating to %Program Files%\Windows Server\Bin
    In Windows Server 2012 R2 Essentials, the location of ARRConfig is %systemroot%\System32\Essentials. Please navigate to the
    Essentials folder and check if this issue still exist. For more details, please refer to following article and check if help you.
    On Premises Exchange Integration Windows Server 2012 Essentials
    If any update, please feel free to let me know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for