Replaced HDD, still not working

Hi. Our MacBook stopped working for no reason. It wouldn't boot up, and just the flashing folder with a question mark appeared. After some searching it seemed like this is a common problem and most likely the HDD had failed. MacBook is 14 months old. Great.
So I bought a new HDD - Seagate Momentus 120GB 7200RPM. Followed the instructions to install it. But the problem persists. The only difference I can tell is that it takes slightly less time for the flashing question-mark folder to appear than it did before.
I have put the OS X install disk into the drive, and held down C during start up, and that makes no difference. Also tried resetting PRAM. No difference. Is there anything else I can do before tossing it in the bin or shelling out $$$?

How strange. HDD's never ever fail do they?? You just had a bit of bad luck, it happens, my brothers HP notebook failed just outside of warranty, motherboard went, nothing you can do about it. HDD's are easily replaceable and can fail easily, Mac or PC irrespective. By buying a Dell laptop you dont reduce the risk of anything going wrong, in fact you probably increase it.
Just a quick note, its unlikely that the new HDD failed right out the box so it maybe something else or it may not have been put in properly.
My .02

Similar Messages

  • IPod touch G2 backlight not working replaced LCD, still not working

    After water got in my iPod the backlight does not work. I tried putting it in rice for a few days but the backlight still did not work.
    Then I replaced the LCD with the same result. Everything but the backlight works.
    What else can I try?

    Then there is a problem with the logic board or there is a bad connector/connection/screen

  • Replacement iPod - Still Not Working

    Last week I sent my 30GB to Apple for service (after having it only a month) and I recieved my replacement yesterday, but I'm still having issues.
    When I first got it home, it hooked up to iTunes and my laptop just fine, but then it stopped transferring songs and I got errors and I had to restore it.
    Since I restored it last, I cannot get it connected to the computer properly. iTunes does not recognize it and when I hook it up to the installer, it says "Initializing..." and just sits there forever, doing nothing. A few times it's told me to restart the computer, which I've done, and then it went back to the "Initializing..." I also tried it in data mode, and still nothing. I have tried uninstalling and reinstalling iTunes and the iPod updater (both the 2006-03-23 update and the old 2006-01-10) and I have been all over the website and I have tried ALL of Apple's suggestions. I tried hooking it up to another computer - a desktop - and it wouldn't work there, either, which leads me to believe that it's the iPod and not the computer.
    It's bad enough that I had to get a month-old iPod replaced, but now the new one won't work, either. I'm very frustrated. Anyone have any suggestions?? I'm about to just send it back to Apple again....
    HP   Windows XP   30GB White

    Nevermind...
    I finally called customer service and the guy was very helpful but nothing he had me do worked, so I'm sending it to Apple... AGAIN!
    I'm my third iPod doesn't work either, I will be very upset. Hopefully the third time will be the charm.

  • 2007 20", replaced HD, still not working

    I have an iMac 20 inch model A1224, circa 2007.  was working fine, then one day stopped booting up.  I would get either just white screen with whirring pinwheel, or it would get to a white screen with grey apple, but no further.  (once in the first 100 power-ups it got as far as loading my wallpaper, but then froze. Genius Bar told my my HD was fried. (I purchased a new iMac, and linked old to new via firewire, which showed the existence of an HD and some top level folders, but clicking on the folders got me to nothing).
    So I decided to replace the HD.  followed instructions on line, replaced the HD myself with an exact replacement  (250 gb HD 3.5" SATA 7200rpm).  Everything seemed physicall fine.  Now when I start up, i get a white screen with a grey folder with question mark.  I inserted the original grey OS X disk in the disk drive, but can't seem to get that to get me past the flashing "?" folder.
    Is it time to give up and throw this machine in the trash?

    Thanks BDAqua and WZZZ.  I figured out the problem -- i was using the wrong "gray" disk.  I found the correct one, and system rebooted and is working fine.  (I now have  new problem, which is that the OS version i installed does not offer you the option of "restoring from time machine backup" -- i think b/c this version is so old, time machine wasn't around then.  I'm now updating all the software via sortware update, and hoping that'll get me to a time machine friendly version

  • Replace range still not working!

    I cannot get replaceRange to work properly on a textArea, with words longer or shorter than the word i want to replace it meeses it all up! here is my code:
    EditReplaceMenuItem.addActionListener(new ActionListener() {//action listener for "replace" menu item in edit menu
    public void actionPerformed(ActionEvent e) {
    String replace = JOptionPane.showInputDialog(null, "Replace:");//find word to replace
    String with = JOptionPane.showInputDialog(null, "With:");//get word to replace with
             int index = jtp.getSelectedIndex();//get selected tab index
             JTextArea textArea = textAreas.get(index);//get textarea coreesponding to tab
             String text = textArea.getText();//get text from that textarea
    //replace code
    int startIndex = 0;
    Scanner scan = new Scanner(text);
    while(scan.hasNext())
       String current = scan.next();
       if(current.equals(replace))
          int start = text.indexOf(replace, startIndex);
          int end = start + replace.length();
          textArea.replaceRange(with, start, end);
       startIndex += current.length();
    });     here is a series of scrennshots which may help you see my problem : )
    http://i41.photobucket.com/albums/e254/frahasio/howstrange.jpg
    please help!

    Is there a particular reason why you're not using
    replaceAll(String regex, String replacement)which is defined for Strings?
    #

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allowing

    My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allow

    Are you on a Windows PC? Do you have anti-virus software running on it? Here are some help articles for you to troubleshoot with:
    Resolve iOS update and restore errors
    Resolve iOS update and restore errors in iTunes

  • Trackpad Still not working right after replacement

    I've recently been having issues with my trackpad on my Macbook Pro, i took it to the apple store last week and they replaced it due to it not registering physical clicks what so ever. However, although a new trackpad was issued/replaced and the problem is slightly better, the trackpad is still not working/registering physical clicks in several areas, anyone got any tips? I also can't really afford to go back to the store again at the moment, however i do have Apple Care which may open more windows for me?
    Thanks

    Welcome to Apple Discussions!
    You might try a SMC reset:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    If no joy, call Apple on the phone and tell them the situation. They will try to troubleshoot it over the phone and should be able to advise you as to what to do.
    Good luck!

  • Ipad display issue - replaced still not working

    I replaced a LCD display on iPad 1 thinking it was bad.  Turned this unit on and it is still not working.  Tried the display on another iPad and it works fine so I know it is not the LCD.  The ipad in questions is recognized in iTunes.  Backlight doesn't come one

    There is obviously a hardware problem and doubtful if anyone here will know what that is.

  • G62-355dx cpu replaced still not working

    My g62-355dx is still not working after replacing the cpu (thats what the blink code was....caps lock blinking once every few seconds) so after replacing the cpu I am still getting the same blink code....tried the hard reset before replacing the cpu but havent tried it after....I just need to know if its possibly the mother board and if a motherboard from a different g62 model will work in my 355dx....
    This question was solved.
    View Solution.

    This is about the third post of its type I have fielded in the last month or so and I will repeat what I have always maintained. It is almost never the CPU, regardless of the blink code. It is almost always the motherboard. Your by far safest bet is to replace like with like although likely another g62-300 series motherboard will work, if it has any feature yours did not or vice versa it may take some case mods to make it fit and you want to avoid that.
    You will need the Service Manual:
    .pdf of manual here
    Your motherboard part number can be found inside the memory compartment. Post back if you want detailed help finding a replacement.

  • Iphone 4s camera still not working after replacing and restore?

    I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

    Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
    Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

  • IOS6 WIFI bug, still not work now, exhausted,help...

    Been like this a week now, tried every possiable way still not any help at all, it can connect the wifi, internet works for 1or 2 minuts then will faile again, changed one router and tried all different settings as still not work, someone told me they don't have this problem they are using different router,maybe it's because IOS6 have sort of confict with some brand router? I am using TPlink, should I keep invest different router and try? Or should I wait for bug fixed?
    Apple didn't give any suggestion to customer and time schedule for bug fixed, this is really **** me off...
    I will try to visit apple store to check if they can change a new one with IOS5 for me.

    They will not change you back to iOS 5. I asked.
    I spent almost 1 week trying to resolve this. Reboot the ipad, reboot my router, delete the network, rejoin the network. Nothing seems to work. I called the Apple support, spent 2 days. After trying every single solution (that I've already done before calling.. duhhh)..
    They told me to:
    - Go to iTunes.Back up all your data, transfer all purchases to your computer. Of course when I tried to transfer all my purchases, they stuck for hours, then crash everything. I had to redo this 3 times. HOURS!!!
    - Restore your iPad from your iTunes. It will erase everything in your iPad, then start fresh as new
    - Turn off your iPad
    - Turn off your router, give it 10-15 minutes, turn on your router
    - Turn on your iPad, join the network
    Even though finally it looks ok. I am still going to return this iPad and get a replacement. I just don't feel confident with the device anymore. I just bought my iPad less than 3 months, still got the box. The support told me I could swap my iPad, all I need is to see the Apple Genius. So I made appointment, otherwise the Genius won't see you.
    I got tons of questions again from the Genius. He said it is my router problem. Basically, I have a crappy router that came from my internet provider. He said that since they opened the store, he only knew TWO people came in with WIFI issue. I told him, all my other devices connect just fine... but of course, they're "oranges" not Apple.
    I thought I'll be getting my replacement right away, but no.. Genius had to place an order first, and they will call me again, and I have to make another appointment to pick it up. I wonder why they don't have one in stock. It's the NEW iPad!!! I hope they're not getting my replacement from some kinda refurbished factory.
    This is my first purchase with Apple. So far it is not a pleasant experience.

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I have restored my ipod nano 2nd generation but its still not working

    i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated

    It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Macbook Pro sound sometimes won't work. Took into Apple to be fixed. Still not working.

    I purchased a Macbook Pro in July 2014 so my computer is still new.  There is no damage to it (it has never been dropped and kept in case).  My issue started about a month to month and half ago.  When watching netflix the show will stop and when I try to hit play it comes up as an audio system error. 
    The sound won't work and then a few minutes later it'll turn on, as if it was lagging.  For example I would send an email and try to hit the volume button to get the sound to work and then a little later I will hear the whooshing sound from the email and the sound adjusting sounds from the keys all at once. I followed the steps from netflix to fix it which were to uninstall and reinstall silverlight.  That still didn't work.  After a while I took it into Apple and they replaced the switch board.  I got my computer back yesterday and today it is still not working.  I have done everything I can think of to fix it.  What else can I do?

    Return it to the repair shop.  Tell them they didn't fix it.  Take full advantage of your warranty.

Maybe you are looking for

  • Need help with memory upgrade on Satellite A100-250

    Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 mb. I want to buy another slat of memory ddr2-533 512 mb, what exactly model am I necessary to search, that they worked in a pair. Sorry for bad english. From Russia with Love. PS.

  • How can I use my log4j config file of my web project in ias?

    I used log4j in my web project. So I put a config file "log4j.properties" in my project WEB-INF/classes/. It works well in tomcat. But when I deploy it to ias parent by orabpel project, It didn't work know! I can only see my log in "$ORACLE_HOME/opmn

  • Photoshop CS2 Issues After Latest Secuirty Update

    I am working on a Power Mac G5 with Mac OSX 10.4 and Adobe CS2. I do not know if it was the security update that caused these problems in Photoshop for me, but that was the only thing that had been installed around the time that the problems started

  • Oracle 9i and Red Hat AS 4.0

    How to install Oracle 9i on Red Hat AS 4.0 ?

  • GUI Problem in Screen Painter

    Hi All, we are using SAP logon 640. In screen painter we are not getting GUI. we are getting the screen in Alphanumeric mode, But not in Graphical mode. How to resolve this problem. Thanks in Advance. Regards, chandra. Message was edited by: K Chandr