Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers . 
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user. 
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users. 
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.

As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

Similar Messages

  • How deactivate SAP* after inital logon and creation of new users

    Pl help me to deactivate SAP* after inital logon and creation of new users.
    Regards
    Jyotirmoy

    Hi,
    log on (as sap* to the portal) and navigate to system administration --> system configuration --> user management configuration --> data sources.
    There you should find a dialog for (de-)activating sap*.
    note that the navigation path could be slightly different (my portal ist set to german, so I translated the path on my own).
    Regards,
    Dominik

  • Configure the syslog of ASA 5512-X for display on Cisco Prime Infrastructure 2.1

    Hi, I'm working on implementing the Cisco Prime Infrastructure 2.1 and want to display the syslog about ASA5512-X with Software Version 9.2.
    What would be the procedure for configuring?
    Thanks in advance.

    Hi,
    Enable "logging host x.x.x.x "  command to enable logging
    check the below link:
    http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/general/asa_91_general_config/monitor_syslog.html#68764
    FYI: Prime Infrastructure support only SEV 0,1,2 syslogs as of now.
    Operate > alarm and events > syslogs
    Thanks-
    Afroz
    ****Ratings Encourages Contributors *****

  • Cisco Prime Infrastructure 1.2 and Aironet 1250 + VSS issues

    Hi,
    I  am new to the NCS implementations and configurations. I have one very  specific case with Cisco Prime Infrastructure 1.2 and autonomnous APs  and several issues with Cisco VSS on 6500 switches.
    So here is the version from Prime:
    NCS/admin# show version
    Cisco Application Deployment Engine OS Release: 2.0
    ADE-OS Build Version: 2.0.1.038
    ADE-OS System Architecture: x86_64
    Copyright (c) 2005-2010 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: NCS
    Version information of installed applications
    Cisco Prime Network Control System
    Version : 1.2.1.012
    IOS version on our APs (which are autonomnous) is:
    AP-N-1>show ver
    Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Thu 11-Aug-11 03:23 by prod_rel_team
    Well  the issue what we have now is that access point has been added but its  not recognized by the NCS prime. I have tried all three versions of SNMP  but I get the same result. The SNMP configuration is valid since I use  the same for my switching infrastructure. When I enter "debug snmp packets" and "terminal monitor" I can see the SNMP communication between Prime and Aironet 1250 which is standalone.
    When  I switch to Lifecycle theme and go to Operate > Device Monitor  Center I see all devices I have added. The Aironet 1250 is reachable but  under collection status I get Managed with Warnings. When I hover over  with my mouse I get "None available".
    I  have successfully added my switching infrastructure in total, which is  operating perfectly for Catalyst 2960/3650/3750/4500 series but for 6500  under VSS I have some warnings. The device is recognized by the system  which is excellent and all is operational. I get the following errors  under Collection Status:
    feature_sensor
    SNMP request timed out
    feature_powerSupplyFanStatus-6k
    SNMP request timed out
    IdentityCapability
    The device is unreachable.
    feature_flashdevice
    SNMP request timed out
    sam_ipsla_feature
    The device is unreachable.
    What can be done to resolve these issues ? I have attached a screenshot of this particular issue. The affected access point is 172.16.165.241.
    Predrag Petrovic       

    Hi rajeeshp,
    Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
    Predrag Petrovic

  • How to change the master page and theme dynamically in sharepoint2013 anonymous site

    hi
    I have to change the master page and theme dynamically in sharepoint2013 anonymous site. i have to show one master page to authenticated user  another master page to anonymous user through code
    Srinivas

    Hi Srinivas,
    According to your description, my understanding is that you want to change the master page and theme dynamically based on the anonymous users or authenticated users.
    Per my knowledge, there is not an OOB way to change the master page and theme dynamically.
    SharePoint is based on Asp.net, as we know Asp.Net request processing is based on pipeline model, so we can delevlop a custom HttpModule to dynamic change the master page based on current logon user profile(using SP Object Model to get).
    Another solution could be to use the SecurityTrimmed control that injects the CSS depending on global user permissions, more information, please refer to
    it.
    Some similar posts for your reference:
    http://social.msdn.microsoft.com/Forums/office/en-US/c2b2d0da-c752-4aea-9c2d-e31a5b1a2988/sharepoint-2010-dynamic-masterpage-based-on-userprofile-property
    http://johanleino.wordpress.com/2011/10/20/using-a-different-master-page-for-authenticated-users-in-sharepoint/
    http://sharepoint.stackexchange.com/questions/21679/how-can-we-use-a-different-masterpage-for-annoymous-and-authenticated-users
    http://sivarajan.me/post/How-to-customize-the-SharePoint-2013-Master-Page-for-Anonymous-Users
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Support for Appletalk on the 526 controller (and others to)

    I have noticed that from version 4.2x the controller does not seem to pass appletalk traffic through to the wireless clients.
    I started to look around for some information but there are quite few resources for the 526. So i started to read the release notes and read the release notes for the 2100 controller and noticed that it doesn't support appletalk at all.
    My question is simple, is it common for cisco's wireless products to not support appletalk? Is this maybe an step on the roadmap to get rid of appletalk completely =)

    Appletalk bridging is supported in 4400, WiSM, or 3750G. If you insist to use 526, you need to configure HREAP on the AP and HREAP local switching for the WLAN.

  • Debugging the master jobs and packages

    How to do Debugging the master jobs and packages ?

    Hi Mukejee,
    Except for executing a SSIS package in BIDS, we can also execute a package using the following methods:
    Execute SSIS Package using DTEXEC.EXE Command Line Utility
    Execute SSIS Package using DTEXECUI.EXE Utility
    Execute SSIS Package using SQL Server Agent Job
    In each method, we can specify the package configurations for the package at runtime. For the detailed information, please see:
    http://www.mssqltips.com/sqlservertip/1775/different-ways-to-execute-a-sql-server-ssis-package/
    http://technet.microsoft.com/en-us/library/ms162810(v=SQL.105).aspx
    http://technet.microsoft.com/en-us/library/ms141701.aspx
    Regards,
    Mike Yin
    TechNet Community Support

  • DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

    DIM ID’s are polluted only when we load the Master data and SID’s are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SID’s  when we delete the transaction and master data.
    a.     True
    b.     False

    Hi,
    You can use the mapping section of the transformation file for this purpose. It should be something like:
    *COL(5) + *Str(_) + *COL(1)
    I am considering that the 5th column of your file is the property. The 1st column is the ID.
    Please take a look at the below link for more information:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
    Hope this helps.

  • Purchased the master suite and premiere pro does not open

    purchased the master suite and premiere pro does not open

    Mac or Windows, and exactly which version of the operating system... which version of Master Suite (CS5 or CS6 or ???) and what error message do you see?

  • [svn:osmf:] 10580: Adding the MAST plugin and a MAST sample app.

    Revision: 10580
    Author:   [email protected]
    Date:     2009-09-24 17:02:28 -0700 (Thu, 24 Sep 2009)
    Log Message:
    Adding the MAST plugin and a MAST sample app.
    Modified Paths:
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/.actionScriptProperties
    Added Paths:
        osmf/trunk/apps/samples/plugins/MASTSample/
        osmf/trunk/apps/samples/plugins/MASTSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/MASTSample/.project
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/AC_OETags.js
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/history/
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/history/history.css
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/history/history.js
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/history/historyFrame.html
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/index.template.html
        osmf/trunk/apps/samples/plugins/MASTSample/html-template/playerProductInstall.swf
        osmf/trunk/apps/samples/plugins/MASTSample/src/
        osmf/trunk/apps/samples/plugins/MASTSample/src/MASTSample.as
        osmf/trunk/plugins/MASTPlugin/
        osmf/trunk/plugins/MASTPlugin/.actionScriptProperties
        osmf/trunk/plugins/MASTPlugin/.project
        osmf/trunk/plugins/MASTPlugin/MASTPlugin.as
        osmf/trunk/plugins/MASTPlugin/html-template/
        osmf/trunk/plugins/MASTPlugin/html-template/AC_OETags.js
        osmf/trunk/plugins/MASTPlugin/html-template/history/
        osmf/trunk/plugins/MASTPlugin/html-template/history/history.css
        osmf/trunk/plugins/MASTPlugin/html-template/history/history.js
        osmf/trunk/plugins/MASTPlugin/html-template/history/historyFrame.html
        osmf/trunk/plugins/MASTPlugin/html-template/index.template.html
        osmf/trunk/plugins/MASTPlugin/html-template/playerProductInstall.swf
        osmf/trunk/plugins/MASTPlugin/org/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/MASTPluginInfo.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/adapter/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/adapter/MASTAdapter.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/loader/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/loader/MASTDocumentProcessedEvent. as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/loader/MASTDocumentProcessor.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/loader/MASTLoadedContext.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/loader/MASTLoader.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/managers/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/managers/MASTConditionManager.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/media/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/media/MASTProxyElement.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/MASTCondition.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/MASTDocument.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/MASTSource.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/MASTTarget.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/model/MASTTrigger.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/parser/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/parser/MASTParser.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/traits/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/traits/MASTPlayableTrait.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/types/
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/types/MASTConditionOperator.as
        osmf/trunk/plugins/MASTPlugin/org/openvideoplayer/mast/types/MASTConditionType.as

    Hi dia_ladji,
    I'm not sure if you've run across this article yet (pdf): http://osmf.org/downloads/pdf/Walkthrough_4_%20UI_Control_bar_and_Layout_Management.pdf
    It seems like conditionally controlling the functionality of your UI controls based on the playing media's metadata is what your after, correct? Here's an overview of what the article covers:
    In this walkthrough we will see how to use the advanced layout controls offered by the
    OSMF components and how dynamically control the layout of interactive elements outside of
    the OSMF components conditionally based on the size of the content displayed by OSMF.
    Specifically we will use the MediaContainer advanced layout capabilities with MetaData for
    composite media loading and display, and see how to integrate custom graphical user
    interface controls to make a skinnable control bar, and make it functional by linking the user
    interactions with the MediaPlayer API, and adjusting the position of the control bar
    dynamically based off of the media content being displayed via events.
    My apologies if you've already seen this, or if I've misunderstood your question, but hope it helps!
    -Scott

  • Regarding the Master Data and the MRP maintained.

    Hi,
    i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,and the remining operation is at Plant A.
    So what are the Master Data and MRP we have mainted for that?
    Please revert back.
    Thanks,
    Mohit

    Dear,
    Sub-contracting is carried out for 2 types-
    1) Operation SubContracting & 2) Material SubContracting
    You need to activate SubCon key (30) in MRP2 for the material which you want to send.
    When you run MRP, it will check the system, if you have the stock as per requirement in the system. If the adequate stock is unavailable it will create PR, which you will need to convert in SubCon Purchase Order.
    Operation SubContracting
    You have to activate External Processing
    "X" (T Code OPJ8) in PP01 Control key for that operation which u want to do externally
    In the routing for the externally processed operation enter the control key as PP02
    In the operation details screen in the External Processing tab enable the check box subcontracting
    Enter thr info rec no and other details and save.
    Thru ME58 Convert purchase requisition to purchase order Thru ME2O Send the material to subcontractor. .Migo receive the material from subcontractor (check theMovement type-541)
    Hope it will help you.
    Regards,
    R.Brahmankar

  • How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that  when adding new content??

    How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that  when adding new content??

    Copy your ENTIRE iTunes FOLDER to an External Drive...
    Full Details Here  >  http://support.apple.com/kb/HT1751
    To Operate iTunes from the External Drive...
    Start iTunes with the Option key held down and guide it to the new location of the library.
    Be Sure the drive is Formatted Mac OS Extended (journaled)
    Also...  have a look at these 2 Videos...
    http://macmost.com/moving-your-itunes-library.html
    http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

  • How to synchronize the signal sending and data acquiring process dynamically with one DAQ_Urgent

    Dear Sir,
    I am using one DAQ card to send a modulation signal (which is a signal summed by a low frequency saw tooth and high frequency sin signal) to the laser controller, and acquire voltage signal from another instrument  (It is in a same measurement system with the laser controller)?
    I would like these two process happening at the same time.
    In the attachment, there are two parts, one of them is signal generating program, the other one is data acquiring program, how to do like this: when I press"run", first the modulation will be sent to the laser controller immediately, and at the same time, the acquiring program starts as well...
    In addition, I think my program is not complete, could you please help me check if there are any other problems with it? 
    Thank you very much.. and appreciate your quick reply in advance.
    Best regards,
    Memorysun
    Attachments:
    Signals generation and lockin recording.vi ‏1227 KB

    Jamie S. wrote:
    Hi Memorysun,
    Thank you for your post and welcome to the forums.
    From your description what you want to achieve is:
     Write data to a Analog Output channel that is then recieved by the Laser
     Acquire (read) data from using an Analog Input channel (output from Laser/Instrument)
    This can be achieved using a single VI with 2 seperate DAQ tasks, one the "Continuously Writes" to the Laser and the other that "Continuously Reads" from the Laser/Instrument. Can I recommend the following examples that can be found in the NI Example Finder (Help>>Find Examples>>Hardware Input and Output>>DAQmx):
     "Cont Gen Voltage Wfm-Int Clk.vi" (for continuous writing)
     "Cont Acq&Graph Voltage-Int Clk.vi" (for continuous acquisition)
    The code from within both these VI's can be placed in a single VI therefore achieving the desired functionality.
    Many Thanks
    Jamie,
    They would be better served with an example that routes the AO hardware sample clock to the source of an externally clocked AI.
    Using the examples you posted will still leave them with the challenge of trying to alligh stimulus with response.
    Ben 
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Motion control: PXI 7350 controller and UMI 7774 to interface with third-party driver UDK5114NW2

    Dear community,
    This is about Motion control in Labview: I try to control a step motor by using a PXI 7350 controller and UMI 7774 to interface with  third-party driver UDK5114NW2. The problem is 5 Disable LEDS on UMI 7774 board always lit even when I check "enable" on "Motion I/O setting" in configuration of PXI 7350 motion controller. Furthermore, when I start to control step motor, it is not working and I found disable LED on UMI board still lit. I don't know how to solve this problem. Can someone help me to figure out? Thank you in advance!
    Hau Nguyen.

    Dear Community,
    I said wrong, 4 disable LEDS on UMI 7774 Board instead of 5 as my previous post. Why nobody help me to solve this problem. I can not turn off disable LEDs on UMI 7774 Board so I can not start the strp motor. Please help me!
    Hau Nguyen. 

  • My girlfriend gave me a $25 iTunes gift card for Christmas, so I switched to the Canada store and spend most of it with .02¢ remaining. *Now I want to switch back to my original store, but I can't.

    My friend gave me a $25 iTunes gift card for Christmas, so I switched to the US store and spend most of it with 11¢ remaining. *Now I want to switch back to my original store, but I can't. iTunes keeps saying "You have a store credit balance; you must spend your balance before you can change stores.*

    You might just have to contact Apple and ask them to remove it (losing it). Usually people clear a balance by buying one song and having the exact remainder charged  to their credit card, but if you don't have a US credit card you cannot do that.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

Maybe you are looking for

  • Subnet mask 255.255.255.255 assigned to VPN client - can't ping LAN

    Hi, I configured PIX 501 with PPTP VPN to connect to the small office (PIX FW, Win 2000 Server, several Win clients, LAN IP 10.0.0.X/24): ip local pool mypool 10.0.0.101-10.0.0.105 vpdn group mygroup accept dialin pptp vpdn group mygroup ppp authenti

  • Open items move on desktop

    When I have several items open on the desktop the one I'm working on is suddenly covered by others from 'behind'. It is particularly hard to use the scroll bar because putting the cursor near the 'edge' of an item seems to activate this effect. How c

  • How can i get lost pics and contacts

    Im very sad i just had a baby and all my pics from birth were on my phone Nd i plugged it into comp for the first time and it restored it and i lost everything and it transported the stuff from my old phone to the new one. As well as my contacts so i

  • Oops alv no_zero and 'word wrap' in fieldcatalog

    Hi All, I have 2 queations 1)  Can I have word wrap option in alv, ie any option to display the same cell information in multiple lines and 2) I am trying to use no_zero of fieldcatalog as shown in below code     wa_billets_fcat-fieldname = 'ACTUAL_Q

  • The same travel request for many employee

    Dear colleagues! Our  HR specialist want to enter the travel request for many employee/workers  in one screen. Or quickly copy the one trip request for many employees. for example -  50 people trips with same attributes - at one time,at one destinati