Replicatiin of Routes in Sales order

Hi,
We are working on CRM 5.0 with ECC 6.0 as backend.
We are creating sales orders in ECC and replicating to CRM.
Now the issue is how to replicate routes from the ECC sales order to CRM Sales order.
Can anybody help us in understanding replication  or redetermination of  routes from ECC to CRM.
Is it possible to maintain routes in CRM?
Points are guaranteed for helpful answer.
Regards,
Madhu

Hi.,
  SPRO-LOGISTIC EXECUTION-Transportation-Basic transportation functions-routes-define routesdefine mode of transportation
REWARD If helpfull
Srini is right
Thanks & Regards
Narayana

Similar Messages

  • How to default Y12354 route in sales order

    hi,
    please help me how i will set up the route Y12354 to sales order, for example when ship to party 4123 was use, the default route should be y12354.
    thank you very muhc for your help.

    Hi,
    ROUTE DETERMINATION:-Route is determined in the Sales order for each item taking these few fields into consideration
    1. Departure zone of the Shipping point in customization
    2. Shipping condition (sales doc type or SP)
    3. Transportation group (Material master)
    4. Transportation zone (SH)
    The same Route is copied to the Delivery document.
    In the Delivery document, Route can be re-determine based on Weight group
    Please check all your seetings in the IMG

  • Automatic "Shipping Type" and "Forwarding Agent" from Route to Sales Order

    Need some help...
    When creating a Sales Order, the field "Shipping type" (inside Shipping tab of the Item Level) and the Forwarding Agent (Partners tab) should be automatically get from the configuration made for the Route applied in the order, via SAP Standard Functionality.
    The Route is being automatically determined in the Sales Order and for this Route, there is a "Shipping Type" and a "Freight Agent" assigned.
    Thanks for the help!

    Hi Hrishi.
    Actually, those informations have to be available in the delivery.
    The idea is that the customer organizes all his operations (picking, packing, loading and tranportation processes) based on deliveries that will be transported by the same agent and using the same shipping type.
    As I assigned an agent and a shipping type in the route, I expected to get these values automatically in the Sales Order, and consequently in the delivery.
    Thanks for the help.
    Regards.

  • How to configure route in sales order and delivery

    Hi friends,
    Can any one explain about Route determiantion steps. It has to take the route automatically in sales order and delivery also.
    i have configured
    shipping condition, transportation group, transportation zone, plant, shipping point determination, actual route by proposalroute.
    Apart from this what are the remaining steps, but it is not picking  in sales order and delivery.
    please any one send the steps for route determination. its very urgent for me.
    Thanks & regards
    Raju

    hi,
    Route is determined
    1.Country of Departure & Departure Zone taken from Shipping Point
    2.Country of Destination & receiving Zone from Ship to party
    3.Shipping condition from CMR
    4.Transportation Group from MMR
    5.Weight Group which is optional.
    Check the above.
    Route is determined in delivery.
    ASHA

  • Change route in sales order line item bases on incoterms in business data

    Hi ,
    I have one requirement, in which I have to change the line item route value based on incoterms maintained in business data. I am not able to find correct user exit or enhancement point.  I have tried enhancement in VBKD_PRICING but its not working.
    Please help me with this. If u need any more details please let me know.
    Regards
    Sandeep

    Hi,
    Use USEREXIT_MOVE_FIELD_TO_VBAP in Report MV45AFZZ. This exit is used for changing the values of fields from VBAP table. 
    USEREXIT_FIELD_MODIFICATION is used for changing the display attributes of screen elements ( hide / unhide fields).
    Regards,
    DPM

  • User Exist for Sales Order

    Hi All,
    When the Route changes in the Sales Order, I want to add the Forwarding agent to the Partfner function atutomatically. So I written the code in the User-Exist "userexit_check_vbap" with the following logic.
    IF sales order is creating with VA01, Add an entry
    and Changing the Sales order with VA02, modifiy an exisiting entry as follow.
    But at the time of Creating with VA01, it is sucessfully adding an entry, but
    whenever you the change Route for sales order with va02, Modify statement is working fine and showing the correct Partner function in the Partner Tab.
    If you save the document and open it again then Changed Route is sucessfully saved but not the partner function. It always having the partner function which you given at the time of creation.
    Can we write the modify statement in the "Userexist_check_vbap"
    READ TABLE xvbpa WITH KEY parvw = 'ZR'
                                posnr = xvbap-posnr.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM lfa1 INTO CORRESPONDING FIELDS OF xvbpa
            WHERE lifnr = tdlnr.
        xvbpa-mandt  = xvbap-mandt.
        xvbpa-vbeln  = xvbap-vbeln.
        xvbpa-posnr  = xvbap-posnr.
        xvbpa-fehgr  = '08'.
        xvbpa-nrart  = 'LI'.
        xvbpa-lifnr  = tdlnr.
        xvbpa-updkz  = 'I'.
        CLEAR: xvbpa-kunnr, xvbpa-stceg.
        xvbpa-parvw  = 'ZR'.
        APPEND xvbpa.
      ELSE.
        xvbpa-lifnr  = tdlnr.
        MODIFY xvbpa TRANSPORTING lifnr WHERE parvw = 'ZR'
                                          AND posnr = xvbap-posnr.
      ENDIF.
    Please suggest me , how can i solve this problem.
    Thanks and Warm Regards,
    Vijay

    I solved the problem by pass the following value
    xvbpa-updkz  = 'U'.
    It solved my problem.

  • Route schedule not updated in some line item of a sales order

    Hi Gurus,
    All order are processed through the EDI interface automatically. Order
    XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
    setup T-code VL52 on specific departure day thursday.
    above are line item of same sales order, with same shipping point and route .
    Why only some salesorder lines missing the route schedule ?? 
    Please Help
    Regards
    Abhilash

    When you post a query here, you need to have patience until some members go through your post.  Please dont expect somebody should respond to you immediately as everybody has their own priorities.
    Coming to your query, it could be due to many reasons as per the following note:-
    Note 1750978 - Route Schedule does not populate on sales order
    Go through the Resolutions given in the above note and check with your system
    G. Lakshmipathi

  • Route not determing automatically at sales order level for some sales order

    Dear All ,
    Route not determing automatically at sales order level  for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
    I have checked all the forums but didn't find any solution for the same.
    Looking for your inputs .
    Thanks inadvance
    Regards
    Venkat

    Hi
    1. Copare the Routes which are Automatically determined and which are not automatically determined
    2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
    SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
    Thanks
    RB

  • Calculation of goods issue date in sales order with routes

    Hello Gurus,
    This is my first post on SCN, I'm excited to share a new little problem I have.
    I have configured my routes determination as per our requirements.  For example, I have one route configured in 0VTC such that the transit duration is 1 hour.
    When I create a sales order, I enter that route (1 hour transit.dur) under shipping on the line item.  Then I set a delivery date sometime in the future to test out my config.  Looking at the shipping "Goods Issue Date", I see that the date is 2 hours earlier than my delivery date.  It's supposed to be 1 hour.
    I looked through many forums and found no help on this.  My factory calendar is configured such that all days, including weekends and holidays are production days.
    Please advise at your earliest.
    Thanks,
    Mido

    Hi TW Typewriter,
    Yes, I am changing the date in the "schedule lines" tab for the sales order to a date next week, say May 23, 2014.  When I click on the display "Shipping" info, I see:
    1) Delivery date: 05/23/2014 - 00:00
    2) GI Date: 05/22/2014 - 22:00:00
    The expectation is to have the GI date 23:00:00 since my config for the route on the sales order is for 1 hr of transit time only.
    See attached

  • How to resolve the issue of route while creating a sales order using IDOC

    Hi,
    When I am creating a sales order mannualy the the route is correct and matching  also but while using IDOC try to create a sales order then the route is showing wrong.
    I tried to debug the program SAPMV45A but I am not getting anything.
    Could any body help me on this.
    Waiting for quick response.
    Best Regards,
    BDP

    Hi Bansidhar,
                 You need to debug the Function Module thats assigned to your Process code.
                 In standard config for Sales Order, Process Code ORDE is assigned to FM IDOC_INPUT_ORDERS. And this FM uses Call Transaction Method to create Sales Orders. SO you can  debug this FM.
               Hope this helps you solving the problem.
    Regards
    Srikanth  M

  • Route determination third party sales order

    We are using third party sales order.  The process flow is as follows.
    Sales order -> Purchase requisition-> Purchase order-> Vendor ships material directly to customer.
    Route is currently determinined based on the following:
    1. Departure zone (from shipping point)
    2. Shipping condition ( from ship to customer master)
    3. Transportation Group (rom material master)
    4. Destination zone (Transportation zone of the Customer in the order)
    Shipping point is in US, but the vendor who ships material to customer is in China. So, we want the Departure zone for the purpose of Route tdeterimination to be based on address in vendor master, and not shipping point.
    Is there anyway, we can do this?
    Thanks,
    Srini

    Dear Srini,
    Welcome to SCN forum....
    I find route determination for third party sales not logical. Just think  in Third-Party Orders, theres is no Material-Movement  and no Deliveries from our Plant;
    In this case Route Determination will not be applicable. Customer has placed order to you and you have placed an order to your vendor, who directly deliver the goods to your customer. And you dont have to decide which route customer's transporter will take?
    So as per me you need not determine routes in case of third party sales order.
    Thanks,
    Raja

  • Route is notcoming in the sales order automatically

    hi gurus
    my qt is when i did route determination in spro each and everything in the config. When am testing in the sales order the route is not coming autocmatically.  The route  I  defined in the route determination it is taking manually.  can any one know  what could be the reason
    thanks in advance

    hi nag,
    pl. follow this simple steps to determine the route automatically.
    1. define the routes and stages. (from which place to place u r sending the goods).
    it is under IMG=LOGISTIC EXECUTION=SHIPPING AND TRANSPORTATION= BASIC SHIPPING FUNCTIONS= ROUTES= DEFINE ROUTES AND STAGES.
    2. define the tranportation zones. (under same menu under route determination).
    3. define the transportation groups.
    4. maintain transporation zone for ur country and shipping point.
    5. assign storage conditions to ur plant shipping pointstorage location - it is for to determine the storage location automatically while delivery screen appears.
    SHIPPING POINT DETERMINATION: in easy steps.
    1.define shipping conditions.
    2.define loading groups.
    3. assign shipping conditions plantloading groups+ shipping point+manual shipping point.
    here u issue would resolved definetely.
    pl. reward points if it is useful.
    regards
    KR

  • Automatic Route Selection at sales order level

    Hi gurus,
    How do I automatically select a route I have created at sales order level for a given client?
    I want to avoid adding the route for each line item manually.
    Regards
    Chris

    Problem solved

  • Routing data for configurable products (Sales order costing)

    Hi
    I am runnign sales order cost estimate for configurable product. here I want to confirm the activity quantity with cost estimate.
    Pls let me know where can I check the activity quantity information . Pls help
    Thanks
    Sneha

    Hi Sneha
    I am bit confused with the terms you used..
    you cannot confirm activity qty while doing cost estimate... Activity confirmation happens during Production Confirmation
    Are you talking about missing activity qty/cost in sales order cost estimate?? Contact your PP consultant... You should have a routing attached while creating the sales order.. If that is there, then Activity cost would show up in the sales order cost estimate
    Br, Ajay M

  • Route calender in sales order

    Dear All,
       I had a query regarding the calender date in sales order, i  want to map, in such way that the sales order should be created for a predefined  date, for Example : The sales order should be created on 6th, 18th , & 25th for the March month , and for April month the date should be  8th, 19th & 29th, the date should be based on dealer route,
    Route              Region           dates          dealer           location
    XXXXX              south              12/03/08      00001          Chennai
    XXXXX              south              17/03/08      00004           Bangalore
    YYYY               west              13/03/08      00006             Mumbai
    YYYY               west               18/03/08     00008              Surat
    Like this there are 10 routes to be defined based on that the order should be created for teh dealer and route also to be defined for that dealer, so if the dealer orders other than the system defined date the system sholud give  "error message"
    plz help me how to config this one& i will give good points
    regards
    Gururaj

    Hi,
           check whether you have maintained route while defining visit plan. if you maintain route there then the system takes route from the visit plan.
    Regards
    sankar

Maybe you are looking for