Replication of datasources causes other datasources to deactivate

Hi,
Noticed the following behaviour in 2004s which again is not good news:-
replicating datasources in the datasources causes other datasources to deactivate.
SAP_ABA     700 0007     SAPKA70007     Cross-Application Component
SAP_BASIS 700     0007     SAPKB70007     SAP Basis Component
PI_BASIS 2005_1_700     0007     SAPKIPYJ77     PI_BASIS 2005_1_700 SAP_BW     700     0007     SAPKW70007SAP NetWeaver BI 7.0
BI_CONT     703     0001     SAPKIBIIP1     Business Intelligence Content
Any advice?

Hello,
I am not sure if I copy you properly however ,I put my thoughts and analysis below-
Reason and Prerequisites
When you activate a DataSource (R3TR RSDS), the system generates the Dictionary objects, the transfer structure in the BI system and the source system, and the Persistent Staging Area. This is a fixed part of the object generation that ensures that data can subsequently be loaded to the Persistent Staging Area. A transformation does not have to exist for this purpose.
This type of process was not used for 3.x DataSources: With 3.x objects, data could only be loaded after a 3.x DataSource (R3TR ISFS) had been mapped to a 3.x InfoSource and the relevant transfer rule had been activated. This means that this type of process also required an explicit and manual step to generate the Dictionary objects.
If all replicated DataSources (R3TR RSDS) were activated automatically, the system would generate a large number of mostly superfluous Dictionary objects. In addition, the replication would take several hours, for example, when you connect a new source system with several hundreds of DataSources.
Solution
Before loading data or creating a transformation, manually activate the DataSources (R3TR RSDS) that are really required.
Please refer note- 925228.
Hope it Helps

Similar Messages

Replication of DataSource

Hi,
i have issue with the replication of DataSource 0CUST_SALES_ATTR.
when i replicate the datasource it is shown as replicated, but the
structure for the new fields are not getting copyed at the Bi side.
new Enhanced fild is found at r3 side fot this data source, and data
for this new field is found for this data source at r3 side in rsa3,
but when i am doing the replication at BI side the new structure
is not replicated .
Please sugest in this regard
Regards,
prasad.

Hi,
In ECC
Goto RSA6 in ECC and expand the SAP R/3 and find your datasource and then place cursor on that and click on Chnage Icon it will takes to you to RSO2 screen internally and if teh fileds are check with HIDE/FIeld only , then UN CHACK it and then Generate it and check in RSA3 for Data.
Then goto BW and then Replicate the DS and see it, if you didn't find then Right click on DS in BW and Change and then Activate it.
Thanks
Reddy

Mass Replication of Datasources in BW 3.5 system !!

Hi Experts,
Actually I want to do a mass replication of datasources in BW 3.5 system. I have searched through the programs and FM, but could not find any. Please provide me some details of how to write a program in ABAP to replicate and activate a lot of data sources and not doing it manually.
Thanks in advance for the suggestions ..

Hi....
You can do as Prashant had told.......if you have only 70 datasource in your system.......
But if there are many datasources....then also you can do that..but the thing is it will replicate all the datasources ......not only those 70.......
In that case you can do one thing........create obe Z table where you maintainr all the 70 datasources and the logistic system name for each datasource......
Then create a program in the following way ......
Suppose the tabke that you have created is ZDATASOURCE
T_ZDATASOURCE TYPE STANDARD TABLE OF ZDATASOURCE,
W_ZDATASOURCE like LINE OF T_ZDATASOURCE.
Select * from ZDATASOURCE into table T_ZDATASOURCE.
LOOP AT T_ZDATASOURCE ASSIGNING W_ZDATASOURCE .
Here call the function RSDS_DATASOURCE_REPLICATE with all the parameters.
In the parameter pass the datasource name and the logistic system name as
W_ZDATASOURCE - DS (Suppose the technical name of the datasource you have given as DS)
W_ZDATASOURCE -LOGSYS (Suppose the technical name of the logistic system you have given as LOGSYS )
Endloop.
Try this....
Regards,
Debjani.....

RH8 causing other apps to crash?

Hello -
I have a colleague (working in another office, so I can't really see this problem first hand) who is trying to install RH8 on a Win7/32 machine (new install, not an upgrade). A member of her IT dept is performing the install.
After the installation of the app and patches is finished, RH seems to work more or less normally (she's new to RH, so her sense of "normal" is rather limited at this stage). The problem is that other applications lock up and crash (she mentioned MS Office apps in particular, but that could be because those are the ones she tends to use the most).
After un-installing RH, the other apps no longer crash.
I've recommended re-installing but skipping the "RoboHelp for Word" piece, but I can't think of anything else.
I'm just wondering if anyone else has seen a similar situation? I've found other threads that deal with RH crashing or the RH install failing, but I couldn't find any in which RH caused other apps to crash.
Thanks,
Dave

Hmm...I posted a reply via email, but it isn't showing up, so I'm pasting it in.
Hi, Rick -
Thanks for the suggestions. Like some of the other threads I've found, these seem to deal mainly with RH crashes rather than other apps. But your first link possibly has some overlap as the menu issue it describes also pops up in a thread I found:
"RoboHelp 8 crashes on Windows 7"
http://forums.adobe.com/message/2955493#2955493
This thread includes a scenario in which Outlook and other apps are failing. Additionally, some users were having RH crashes related to the menu bug. Some users found relief by uninstalling source control, others did not. Finally, An Adobe employee posted a fix that corrects issues related to Oleacc.dll which helped some users.
To be thorough, I'll mention that the problems are occurring on a laptop (another thread traced RH crashes to a BioMetric service running on their laptop). And my colleague has the FoxIt PDF utility installed (I don't think this should be the issue here, but perhaps worth a mention.)
I'm going to suggest that they try:
1a. Check the registry to ensure traces of the previous RH install are gone.
1b. Reinstall but omit source control and RH for Word (I think you can skip these during install? I'm no longer allowed to to perform my own installs, so I'm less familiar with the process than I once was.)
2. Ensure patches are installed (version should be 8.02.208)
3. If that doesn't work, try the Oleacc.dll fix.
4. If that doesn't work, try another Win7/32 machine (preferably non-laptop).
5. If all is well on the other machine, I guess it is time to start looking at which non-essential services might be causing a conflict.
Regards,
Dave

InDesign causing others to print blanks pages

Okay so this is a weird issue and I'm getting no results.
My issue is simple. After I print in ID anyone else I work with prints blank pages (We're printing through a network to a device). Also cyan prints incorrectly; however that is fixed if I open the print driver from the print dialog. Now the color thing is a problem through all the adobe software (Illy, Photoshop, Acrobat). No matter which program I use cyan prints wrong. But back to the main issue, strictly ID causes others to print blank. It isn't consistent either. A single document could consecutively cause the blanks then not cause them a little later. We've tried ever print driver possible and the problem persists. Another curious behavior with ID in conjunction with Acrobat is if Acrobat is open and I try to export to .pdf from ID then both programs freeze (however no message of either not responding comes up in the activity monitor) and the preferences are erased from ID
I've spent 4 hrs on the phone with Adobe support and it's just some indian reading from a handbook asking over and over if I deleted my preferences. I've spent days with the printer manufacturer and worked with 7 of their tech specialists and even had them send out a new unit and still the issues. I need to know if the rest of the world is seeing this. Or if this is even close to something someone has seen
So from what I'm seeing is a problem with the PostScript writing that's freaking it out but I'm not software engineer so I can't say for sure.
I'm running CC (though we still had the problems on CS6)
OSX 1.7
ID version 9.2.2
printer is a Konica Bizhub 554e (it's a laser copier)
Thanks,

I actually have created a .pdf and had others print it (a file I create in ID and export to pdf). What ends up happening is if I try to print the pdf people after me get blanks. However if someone else prints it there is no issue. I may have left out an important point I'm the only mac that uses the printer, everyone else uses pc (and I don't know if that's an issue). I only have a postscript driver available (which is good) but i don't know what everyone else is using. I want to say in all of this i heard they have a PCL driver.
As far as the router, I'm hardwired into the network so there is no router. Konica and our IT have checked the network and ruled out that possibility (and I don't really know what that means)
But you are reaffirming the fact it is the printer and they need to fix it. And the fact that a document printed with only cyan is printed with all four colors to give me some weird off color makes me think the disconnect is between Adobe and the printer. But still so weird about the blanks.
Thanks for the input

Downloaded songs frome itunes and internet went down and they will not play and it also caused other songs not to but most will what do i need to do wiyhout erasing everything

downloaded songs from itunes and the internet went down and they will not play and also caused other songs already downloaded not to play what can i do

You can try a couple of different things. First - restart the iPod and see if the songs will play.
Restart the iPod by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't help - delete the songs and then download them again. You can download purchased music again at no charge as long as you use the same Apple ID that you bought them with originally and as long as you live in one of these countries.
Previously purchased music is only available through iTunes in the Cloud in Argentina, Australia, Belgium, Bolivia, Brazil, Canada, Chile, Colombia, Costa Rica, Cyprus, Czech Republic, Dominican Republic, Ecuador, El Salvador, France, Germany, Guatemala, Honduras, Ireland, Luxembourg, Malta, Mexico, New Zealand, Nicaragua, Panama, Paraguay, Peru, Slovakia, Spain, Switzerland, the United Kingdom, United States, and Venezuela.
If you are running iOS 5 on the iPod - You can delete songs by swiping across the song in list view to bring up a red delete button. Tap the button to delete the songs. Download the songs again in the purchased tab in iTunes.
Downloading Past Purchases

Connecting Nano to PC causes other USB devices to unconnect

Connecting Nano to PC causes other USB devices to unconnect from USB2 ports. USB2 are on a pci card. Is there anything I can do to stop this from happening?
Thanks,
RON C

Hi
I have Satellite M70-159 and I didnt notice any strange problem with USB ports. I use a few of them like printer, webcam, USB memory stick, optical mouse and external HDD. The devices are recognized properly and I remove them always without safe remove option.
Now I have Vista preinstalled and till now there is no problem. If I understood you right USB ports are working well but there is problem with USB modem only. Am I right?
Try also to contact modem producer support. Maybe is issue like this known and hopefully they have some logical explanation.

Can this be safely removed and how without causing other security issues???

Having repeated problems with FF hanging and/or closing unexpectedly. Problem listed is always "plugin-container.exe has encountered a problem and has to close". Running version 3.6.15. Can this be safely removed and how without causing other security issues???

Disable the plugin-container for some or all 4 plugins. 
http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins#Disabling_crash_protection

Moving words in paragraph causes other words to shift

When I use a soft return to move a word to the next line in a paragraph, it causes other words in the paragraph to shift as well. In Quark, when I do the same, it only affects the one word I want to move. I would like to be able to move only one word without affecting others. Is there a way to do this?

Another option is to use a nonbreaking space between words (Option+Command+x) to keep desired words together instead of the No Break attribute.
Related is the nonbreaking hyphen (Option+Command+-) for keeping certain hyphenated text strings together (like a phone number).
No Break is great for keeping things like URLs together. It can be set up in a character style, so that it is easy to apply and style at the same time.
HTH
-mt

Replication of datasource in BI

hi,
From what i have understood , after creating a datasource in source system and after selecting the required fields from
the source system, it has to be communicated to the BI.
This is done by replicating in the BI system
My question is what exactly happens after replication
IF i have selected ten fields from the source system, will infoobjects looking similar to those fields will be generated in BI system
regards
AT

hi,
From what i have understood , after creating a datasource in source system and after selecting the required fields from
the source system, it has to be communicated to the BI.
This is done by replicating in the BI system
My question is what exactly happens after replication
IF i have selected ten fields from the source system, will infoobjects looking similar to those fields will be generated in BI system
regards
AT

Replication of datasources

Hi
I am replicating datsources to BW from r/3. While replicating a popup comes having four options:
1. datsources
2. 3.x datasources
3. this and following 29 as datasouce
4. this and following 29 as 3.x datasouce
So can u tell me what have to be chosen and what are the significance of chosing this. Tell me the impact of chosing this also.
for some of datasources i have already chosen "Datasource". If i want to change this as "3.x datasource" then wht need to be done?
Vinod.

Hi,
check with these links:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/fd/5b725f617ddc40b760cf5396bfcb5d/frameset.htm

HT2509 Despite what this article states, Apple support told me not to try to remove any fonts as it could cause other possibly serious problems. Is there a program which can be safely installed which will keep at the top of the font list those fonts whic

An article in the New York Times yesterday told how to remove unwanted fonts from the Font Book. I followed its instructions (the same as those on the webpage "support.apple.com/kb/ht2509") and was NOT successful in removing fonts. Despite what the newspaper article and the web page stated, my attempts to remove fonts were unsuccessful. I use perhaps 15-20 of the hundreds and hundreds of fonts, and deleting those I don't use would make choosing a font a lot faster. I called support and was told not to try to remove any fonts which I myself had not added to the list(I have not added any) as doing so could cause significant problems elsewhere. The support tech suggested that there might be independent software programs which would keep at the top of the list those fonts I have used, which sure would speed up the process of selecting a font. Anyone know of such a program, or how to safely alter the font list Thanks.

I just spoke again to tech support and this time an answer was provided that works! Choose the font you want to use, drag it to the left, and a new "unnamed" folder will appear. Continue to drag into that folder fonts you want to use. You can click onto that folder to change its name. Then when using font book merely click on that folder to open it and select the font wanted. This tech rep also confirmed that you should NOT try to delete individual fonts as they are part of the basic operating system; he did confirm that the apple web page in parentheses above says otherwise, and will refer that to higher ups to see about removing or modifying that page.

Embedding HTML file in folio causes other indesign files to be embedded into article

For our upcoming issue we have the following files:
COVER_Apr.indd
COVER_horz.indd
Calendar_Apr.indd
Chef_Tournedos.indd
Home_hybrid.indd
Kristen_Campo.indd
List_April.indd
Look_Back.indd
Masthead_Apr.indd
Pam_Sherman_Touch.indd
Review_Lucano.indd
Shop_talk_ChicFeet.indd
Short_festival.indd
Showtime.indd
SotH_Fondue.indd
TOC_Apr.indd
Taste_Test_Caesar.indd
editors_letter.indd
editors_letter_embed.html
When adding editors_letter.indd to a folio, (which uses a web content overlay of editors_letter_embed.html) inside of it, it seems that the other indesign files are added inside the article causing it to be nearly 40Mb. (I can tell this is happening because when updating the article it says
Adding File ...TOC_Apr.indd
Adding File... Shop_talk_ChicFeed.indd
..etc
If I remove the web content overlay, it is much smaller. (The total folio size)

Made a subfolder inside current folder and it seems to NOT add the other files now.

Use of DSC causes other applications that use SQL: to fail to run.

The use of Labview DSC seems to cause programs that use other vendor's SQL support to lock up and die. My current choice had been to run msconfig to disable loading any labview support upon startup. This allows me to use other applications such as PageManager. However oncde I run Labview I must again reboot to gain access to the other applications.
I thought all SQL and Database drivers were downwards compatible.

Hi,
maybe you should write your question to the NI LV DSC forum directly. It's
not so crowded and suits well for bug reports. I'd suggest to add this to
the discussion "What issues have you run into when upgrading to LabVIEW 7
Express?" ( http://tinyurl.com/xc1c ) even.
Sometimes I've the impression NI needs more pressure of the users for LV
DSC...
"reverse o" schrieb im Newsbeitrag
news:[email protected]..
> The use of Labview DSC seems to cause programs that use other vendor's
> SQL support to lock up and die. My current choice had been to run
> msconfig to disable loading any labview support upon startup. This
> allows me to use other applications such as PageManager. However oncde
> I run Labview I m
ust again reboot to gain access to the other
> applications.
>
> I thought all SQL and Database drivers were downwards compatible.

Commit causing other form to fail

I have an app that runs on forms 6i. The app is made up of multiple forms, all of which can be opened using open form (or go form if the form is already open).
The forms are not table based. i.e. they are coded so that triggers fire to ensure users have entered values etc.
The forms are causing problems as one has a commit in it but this is causing a when-validate-item to fire in another. As the error does not concern the screen they are on it is making the user think what they have done has saved when in fact it hasn't.
Do you know if there is anyway of coping with this scenario.
Thanks
Bryan

> Do you know if there is anyway of coping with this scenario.
Try doing this everywhere immediately before you do an Open_Form or Go_Form:
Validate(Form_Scope);
If not form_success then
Raise Form_trigger_failure;
End if;
> Ours are not as then they can be a lot more user friendly. Just means you have
to do your own inserts etc in the triggers and then do a commit.
So you are NOT using the default block processing that Forms automatically gives you when you create a base-table block? If you are not, and instead are displaying data using select statements rather than Execute_Query... then I think you are doing things the hard way. ...Mercy!

Replication of datasources causes other datasources to deactivate

Similar Messages

Maybe you are looking for