Report abuse against a specific user instead of just individual posts

Is it possible to implement a "Report Abuse" link against users instead of just individual postings? It would help in some places to stop people who post vast numbers of interview questions or such like across the forums.
Gareth.

Hi
I have read and browsed through SDN and it is clearly evident that the volume of posts herein are redundant and genuine concerns are left unresolved. Moreover, the time spent in searching is a complete waste.
I have been a member of a few technical forums and would like to contribute my suggesstion:
1. SDN should be largely moderated and instant posting into the forum need not be allowed.
Experts / moderators in respective areas of the forum should actually decide if a post is genuine or it is a point stealer. I am not sure if this is in practice so please disregard if i am iterating.
2. The points system need not be a part of forum questions anymore as it is clearly misused (answers are either links or huge codes with no explanation????? we have google, thank you !!! ), only articles, blogs n wiki writers should actually be credited with points for their contribution.
Perhaps my approach is at a very root level and needs amendments which are not easy but i feel, to get meaningful solutions some changes needs to be made else the very essence of sdn is lost.
well when u gotta kick ***.... its better to JUST DO IT.
Thank you guys
Shubhajit Chakraborty.

Similar Messages

"Go to Report" action fails for specific user.

Hi all,
I have Sharepoint 2010 in Integrated Mode with Reporting Services 2008 R2 running in ReportViewer webparts.
In many reports I have a "Go to Report" action that work fine.
Until now all of our users were able to use the "Go to Report" action. However, now for the first time there is a user that is not taken to the target report, but instead is taken to the site default page (the url that is also displayed when I
mouse-over the link). I have tested and in my browser (same version) it works ok.
Is there a setting in IE9 that can prevent or interrupt the Go to Report action?
Many thanks.
Jacco Bloemendaal

Hi Jacco,
Please check if this issue also persist in other browser. It is may be due to compatibility issue. Please refer to the following steps to set browser open all intranet sites with Compatibility View mode automatically.
1. Launch the IE 9, and press Alt+T to select the Tools.
2. Click Compatibility View settings.
3. Check the “Display intranet sites in Compatibility View” option, and click Close.
There is a similar issue, you can refer to it.
https://connect.microsoft.com/SQLServer/feedback/details/671138/ssrs-2008-r2-sharepoint-2010-ie9-no-export-submenus
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How do you add folders to the music library instead of just individual files in iTunes 10?

When I try to add folders to the library like I used to be able to, the only option that appears is 'Add files to library' - any tips?

You can restore much of the look & feel of the previous version with these shortcuts:
CTRL+B to turn on the menu bar (also opens temporarily with ALT).
CTRL+S to turn on the sidebar (your device should be listed here as before).
CTRL+/ to turn on the status bar.
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour.
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store anduntick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may allow iTunes to start up quicker).
The first one will give you access to File > Add Folder to Library.
tt2

Interactive report gives an error only for a specific user

An interactive report based on a very complicated select gives an error only when a specific user is logged on.
The error is:
ORA-00932: inconsistent datatypes: expected - got CLOB.
For other users logging using this page it works fine.
Authentication for this application is done using a stored function.
The query does not use the current userid in it.
Why does it fail for a specific user? if there is a problem, it should fail all the time.

Hi ankur,
By what you said the report dont have any date parameters or no date columns.
"Query execution was not successful ORA-01843 not a valid month." This means it is related with date mask passing a invalid month into date column or argument to to_date function.Check once the session date that is 'dd-mm-yy' or anything else
select * from nls_session_parameters where parameter = 'NLS_DATE_FORMAT'
select to_date('01-DEC-06'),to_date('01-12-06') from dual;
Also a general question whenever I am trying to mark any question as 'Helpful', the status is not changing. Is there anything I am missing.While you flag it 'helpful' or 'correct',it takes you to other screen where you see "Yes, the question is now answered" click the radio button and then click ok button.
Hope its helpful.
Best Wishes,
Kranthi.
Edited by: Kranthi.K on Jun 8, 2009 9:00 AM

Brief report of about 2 months for the sqls run under a specific user ?

Hi,
Is there a way i can get the brief report of about 2 months for the sqls run under a specific user in Oracle 11g.
thanks in advance

913410 wrote:
Yes,
auditing is enabled
SQL> show parameter audit;
NAME                                 TYPE        VALUE
audit_file_dest                      string      /u01/app/oracle/admin/PRCMTDB/
adump
audit_sys_operations                 boolean     FALSE
audit_syslog_level                   string
audit_trail                          string      DBthen how to get the informationabove is necessary, but not SUFFICIENT
default Oracle behavior is that NO specific actions are audited.
You would have had to manually enable AUDIT for all SQL statement by single user

Report which would collect all users in STAD running an specific program

Hi
How could I make an report which would collect all users in STAD running an specific program daily. The issuse is that this program is not available in sm20. How could I then send this list to list of receipients?
I have in mind to "submit "stad" but it is long time ago I used this and I do not have access to that source
THX

we found solution via a job runned report with variant

Authenticating Device Admin users against AD specific groups

Hi,
I am using ACS 5.3 What I am about is setting user authentication against existence of the user in specific AD group, not just being a member in any AD. What is happening now, users get authenticated as long as they exists in the AD, luckily they fail on authorization, as it is bound to specific AD group.
Any idea, how can I bind the authentication aginst specific group in AD, not just using AD1 as the identity source.
Thanks

Hi Mike,
Can you please define what you exactly mean by authentication and authorization?
The ACS checks the AD for a specific user if it is available and if the credentials are correct. If it is then on the AD you will probably find a successful authentication on the logs, but form the user perspective, the user does not know about if it is authenticated or not at this stage.
Now, the ACS knows the credentials are correct and then check the policy rules that are configured. depending on the policy rules it will tell the user if it is successfully authenticated or not.
In the policy, you control success of failure of the authentication of the client depending on the AD group.
If what I explained above is not what you are looking for please elaborate more about your request so we better understand your concern.
Regards,
Rating useful replies is more useful than saying "Thank you"

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

List of reports accessible to specific user.

I have a situation where user lets say 'A' used to run some reports. A left the company so the person who replaced A wants to run the same reports but he doesn't have access. So I checked if A owns any reports then I found out that A doesn't have ownership of any reports which he used to run. Is there any way I can find reports which are accessible to specific user. Please help.
Thanks,
PA1

Hi,
You can import the The Discoverer V5 EUL business area and workbooks which are in the EUL5.eex file shipped with Discoverer administrator. This will show you all the workbook shares set up in the EUL.
Alternatively you can run the SQL below which will give you the workbooks shared with a user or role:
select doc_name, doc_developer_key
from eul_us.eul5_documents doc
, eul_us.eul5_access_privs ap
, eul_us.eul5_eul_users eu
where doc.doc_id = ap.gd_doc_id
and ap.ap_type = 'GD'
and ap.ap_eu_id = eu.eu_id
and eu.eu_role_flag=0 /* 0=user 1=role */
and eu.eu_username = '&Username'
Rod West

Reports created by Specific User ID's

I wan to get the details of of Z Reports that are made by specific user e.g
User Id USER_01 has made so much reports with details.
how can i get this ????

Hi,
Go to TADIR table in SE11.
Then restrict the entries by giving the userid in Author.
Kindly reward points by clicking the star on the left of reply,if it helps.

PO Restict to display specific user.

Dear Expert,
My requirment as below.
Recently we have implement the rental PO process. As per manaement suggestion, this type of PO can able to display specific user only.
The authrozation matrix in display role where doc type marked as "*" and like this 1500 roles is available.
now changing the 1500 role is not ideal way in this situation. So need to restrict the user without modifying exsting role object.
i want the solution like, even role authrozation is assigned but he shouln't able to view PO or any report related to that doc type.
Please suggest any programme, BADI or enhancement is Possible.
Thanks and Regards
Nitesh

Hi Nitesh
Changing 1500 roles may be work intensive but wouldn't it be better to use the standard SAP approach to restricting access instead of enhancements?
Of those 1500, how many are imparting/derived?
Regards
Colleen

How to pop up a system message for a specific user when She/He log on SAP

Hi Friends,
As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
Thanks in advance.
Joe

Below code can be used to send a pop up message to all users who are logged on to the
system.
DATA: MESSAGE(128) VALUE 'Test message'.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 10.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TAB' FIELD USR_TABL-SYS.
LOOP AT USR_TABL.
CALL FUNCTION 'TH_POPUP'
EXPORTING
CLIENT = SY-MANDT
USER = USR_TABL-BNAME
MESSAGE = MESSAGE
EXCEPTIONS
USER_NOT_FOUND = 1.
ENDLOOP.
In the above code just pass the desired user ID instead of All user ID's
Edited by: harsh bhalla on Mar 26, 2009 2:14 PM

ALV report - copy layout to another user

Hello,
I have a question about ALV reports.
In ALV we have option to select layout and save it by user-specific.
How to copy this layout to another user?
Is there some function/Bapi?
Thanks in advance,
Michal

Hi Michael,
Here are the steps I documented for managing this procedure:
First Step is to READ the Layout into the Program
     The parameters for the layout can be found in table LTDX
Goto SE37 and enter: LT_DBDATA_READ_FROM_LTDX
When (READ) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
An example is shown below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
Execute.
Now our next step is to WRITE the information from the program into table: LTDX
While at the Function Builder Screen enter the new function module: LT_DBDATA_WRITE_TO_LTDX
When you (WRITE) you will input information for the following parameters:
Report Name
Handle
Log Group
User
Variant
Type
When completed, your input screen for (WRITE) should look like the screen below:
<screen shots didn't load in my response> email if you'd like the document with screen shots>
IMPORTANT     When entering information for IS_VARKEY, remember to use the u201Cnew useru201D ID
When entering information for IS_VARIANT, remember to enter information exactly as found in table LTDX and remember that the parameter: DEPENDVARS may be needed to complete your entry
Now Execute the Function Module. When completed go to table: LTDX and confirm that your new entry has been added.
Pre Checklist:
1.)     Capture entries (users) you want to copy from table: LTDX
2.)     Make sure you have access to execute function modules/eCATT scripts
3.)     Make sure you have table display access (needed to find and validate updates)
If you'd like the documentation with screen shots please reply with your email address.
Cheers,
Robert

Draft Documents View is empty for a specific user

Hi,
For a specific user, when he goes on the Document Draft Reports, the Sales Document sub-form is empty. Meaning that when he ticks the "Sales Documents" option, the boxes to choose specific Sales Document does not exist (e.g. Sales Quotation, Sales Orders etc.). This happens no matter what are the other options (e.g Open Only or User Option).
The other lists (Purchasing and Stock) are working properly. Again, all the other users do not experience the same issue as the form is working properly
The installation is on 2007A SP01
Any ideas?
Thanks in advance
Gerasimos

Hi Gerasimos.......
I'm sure this is a Bug in your system. If you have any of the adons then please Disconnect it and also try to create new Super User and give him license and then check with this new user for the same output.......
Else I'm afraid you need to raise a support ticket to SAP.......
Regards,
Rahul

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

Report abuse against a specific user instead of just individual posts

Similar Messages

Maybe you are looking for