Report:actual costs:statistical wbs elements and assets assigned to them

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

Thanks for your reply but this is not the question.
The question is:
Example:
I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
I post lot of invoices in each asset.
I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
Thanks and regards,
Miguel

Similar Messages

  • Report: Statistical WBS elements with assets assigned to them - actual cost

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Hi
    There is not a standard report which can cater to your requirements. You need to develop one.
    You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
    Regards

  • Report with cost center, Wbs element and cost element

    Dear Experts,
    I am creating Income Statement report with report painter using table CCSS.
    In this report, I need cost centers, cost elements/ GL accounts and WBS elements.
    Report is okay except sales. Because my cost elements for revenue are created with the category "11", it is not showing in the report.
    Please suggest what changes to make to get sales revenues in the report.
    Thanks

    Hi Simi
    Structure CCSS of Report Painter is combination of several tables including COEP
    Even your revenue should have been updated in COEP table...
    May be your report's selection conditions are preventing the revenues from being displayed... Can you check that?/
    Also, you can build this report from FI Structures
    Br, Ajay M

  • ACTUAL COSTS:REPORT WITH STATISTICAL WBS AND ASSETS ASSIGNED TO THEM

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
        Assets assigned to each WBS
              Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    An statistical WBS element is an SAP object . Statistical means that you need another object to post the cost or income, let's say,an asset.
    Actual costs are the real postings you have in an object, coming from MM, SD, GL ... (just the contrary as budget or planned values).

  • WBS Elements and Asset Under Constructions have different Cost Centers

    Hello Experts,
    We have created a WBS element in one of the projects.
    As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
    These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
    I have checked the settings like automatic account assignment, etc but all settings look correct.
    Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
    Thanks in advance
    Leena

    Thanks for your replies...
    @ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
    @ Abdul - Please elaborate more on Validation and Substitution.
    Regards,
    Leena.

  • Need a report for actual cost by WBS element by month

    Hello all,
    I am looking for a report that will give me the total costs charged to a series of of WBS elements by month. Does anybody know if such a report can be run and what the transaction number of this report would be?
    Thanks

    Hello Stacy,
    Thank you for your help.
    I tried the S_ALR_87100185 report as you instructed but I cant get it to display as I would like to see it. What I need the report to do is display actuals by month and WBS elemnts from January through August. However the report cuts off at the May period. Does anybody have a workaround so I can see the charges from January through August?
    Thanks

  • Function Module to find Planned Costs and Actual Costs against WBS element

    Dear All,
    We have a requirement where we need to find out the Planned Costs and Actual Costs booked against a WBS element, in a year. The costs can be against all the plan versions or on individual plan version.
    Are there any function modules to retrieve this value?
    Thanks for the help.
    Warm Regards,
    Judith

    Hi,
    The easiest way would be to get the OBJNR for all WBS elements from PRPS and look up RPSCO and summarize for Value type (RPSCO-WRTTP) 1 for planned cost and 4 for Actual cost.
    Please let me know if this helps.
    jibat

  • Report showing sum of Budget/actual cost of WBS elements from diff proj

    Hi,
    i need to display consolidated budget/cost report for separate projects. (example PROJ 1 and PROJ 2)
    in both projects, they have similar structure of WBS (same descriptions etc..)
    in reports i can run both project but the values are summarized for the entire projects.. (results = Total of PROJ 1 + total of PROJ 2).
    but i need report showing subtotals of WBS 1.1 of PROJ 1 + WBS 1.1 of PROJ 2 and so on...
    i thought i could do it using CJI8 but i cannot filter it by description and do subtotals since it does not have a description column.
    is my requirement possible with standard or need to customize a report?
    thanks in advance

    hi
    please try to use Co Object Name field with sub total

  • Statistical WBS element posting - Asset

    Hi,
    From the SAP help on AS03 transcation field on Origin tab >Account Assignmnet for investment  - WBS element  , I see the following information.
    WBS element investment project
    Enter the WBS element here, if the system should automatically make statistical postings of the transactions on this asset to this WBS element.
    You can specify in the Customizing definition of the transaction types, whether statistical automatic posting should take place for certain transactions.
    But I am unable to find a setting in the transaction type which allows the statistical postings on the WBS element , when we are posting to the asset.
    We have a requirement to post statistical postings to WBS element when posting to the asset and we thought of using this funtionality but unable to find the setting which allows the statistical postings on the transaction type.
    If anyone knows how to make this setting , could you please share with me.
    Thanks
    Vara Prasad

    Hi Markus,
    Thanks for your response.
    Even with the OSS note I am unable to find how to change the asset accounting transaction types allowed for statistical postings to WBS elements.
    I am aware of other steps in the configuration except this setting, could you please let me know if you have any idea on this setting specifically.
    Regards
    Vara Prasad

  • No costs visible for statistical WBS element

    Hi,
    The followin steps are the setup:
    - Project with a statistical WBS element and a network below
    - Create a PO with Account category "Fixed Asset"
    - Fill in a fixed asset, but also a (statistical) WBS element (put field 'project' optional in customizing)
    - execute a MIGO to book costs
    Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
    HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
    Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
    kindest regards
    bert

    Is this necessary?
    Because in the end I want to book these costs as actual costs on my fixed asset...

  • No costs visible statistical WBS element

    Hi,
    The followin steps are the setup:
    - Project with a statistical WBS element and a network below
    - Create a PO with Account category "Fixed Asset"
    - Fill in a fixed asset, but also a (statistical) WBS element (put fields 'project' and 'network' optional in customizing)
    - execute a MIGO to book costs
    Now when I run the cost report for this project using transaction CJI3 then I do NOT get the costs visible on this statistical WBS element.
    HOWEVER when I do the same steps, but instead of putting a statistical WBS element I put the network (next to the fixed asset) then I do get the costs visible.
    Is this normal or do I have to change something in order to get the costs visible for my statistical WBS element?
    kindest regards
    bert

    It is normal

  • WBS element and Cost Center

    Hi Gurus,
    As far as I know, when the a/c assignment category is P in a PO, the costs are assessed on the cost object WBS element and when the a/c assignment category is K in a PO, the costs are assessed on the cost object cost center. But, as I drill down a WBS element, I find Requesting and responsible cost center.
    So, can I say that a WBS element is actually a child of the responsible cost center ?
          And all the costs assessed on a WBS element are eventually assessed on the responsible cost center?
    Please help in clearing my concepts.
    Thanks,
    Kumar

    hi,
    You assign the account assignment to WBS element based on the OPERATIVE INDICATOR...
    By this you specify the attributes of a WBS element and determine which tasks the WBS element can carry out in the project...
    Please check the LInk given for futher explainations:
    [WBS ELEMENT|http://help.sap.com/erp2005_ehp_04/helpdata/EN/4c/225e2a46e611d189470000e829fbbd/frameset.htm]
    check the table given at the bottom...
    Regards
    Priyanka.P

  • Statistical WBS Element - do we need to set as Account Assignment Element?

    Hi,
    I would like to know if I define the WBS element to be statistical (statistical ticked in Control tab) and would want to have posting.  Do I need to set it as account assignment element?  (I noticed system is not allowing me to post if I do not set it as account assignment element).  I want to make sure the actual cost would be be posted to the WBS element as the WBS element should just be statistical in nature.
    Please also confirm if I always need to specify actual cost center posted if the statistical field is ticked PRPS-KOSTL.
    Thanks!

    Yes, so the account assignment should always be ticked if I want to post actual to STATISTICAL WBS Element.  Now I would like to confirm if I always need to specify actual cost center posted if the statistical field is ticked PRPS-KOSTL.
    Also, I understand that if I run CJI3, for statistical Actuals posted, its value type will be 11 - Statistical Actual instead of 4 - Actual.
    Thanks!
    Vivian

  • Change WBS's statistical WBS element

    Hello;
    We use the SAP PS module. I create the WBS and WBS's statistical WBS element (XSTAT) set the true.
    I need the change WBS's statistical WBS element and set the false. But WBS's statistical WBS element read only on the screen.
    How is change WBS's statistical WBS element?
    Thanks.

    Hello
    Set a substitution rule for a particilar proj profile/type, to set the WBS as statistical on saving.
    Sarang

  • Change the PYP's statistical WBS element

    Hello;
    We use the SAP PS module. I create the PYP and PYP's statistical WBS element (XSTAT) set the true.
    I need the change PYP's statistical WBS element and set the false.  But PYP's statistical WBS element read only on the screen.
    How is change PYP's statistical WBS element?
    Thanks.

    Thanks

Maybe you are looking for

  • How to get mouse properties from Graphs/Charts?

    Hello, My problem is the following: I have a graph that displays some data and two cursors. Next to it is a button that allows users to select whether they want to see all data, or a selection based on the cursors. When in the selection mode, the cur

  • HT201209 Help needed to Redeem an app

    Hi, I'm brand new to Apple iPad. I was given three iPad cards worth $10.00 each. Someone helped me redeem a couple apps but I cannot remember how to do it. I'm showing $17.04 credit under my Apple ID. When I select the app that I want,"in this case N

  • Java Error Sample Code

    I get the following error when I try to complie the hotel.java class in the travel schema. internal error: unanticipated exception: java.lang.NoClassDefFoundError: oracle/aurora/sqljdecl/sqldec1 What classes is it looking for? What do I need in my pa

  • Bdc & report problem

    Hi   experts can u please help me.my problem is i want to know that how to read the value against a particular field by read statement .like i want to read emo_amend against order no.(both r in same table ymt_mill_order.

  • Adobe Content Viewer/no interactivity or animation

    We're running InDesign CS5.5 I work at an advertising agency and just had my IT department update my extensions to: Folio Producer Tools v.1.10.1 Folio Panel v.12.2.2.1 I also updated my Adobe Content Viewer App on my iPad 2. My problem: The pages sh