Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Similar Messages

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • Crystal Report does not show the webelement for SAP System

    Hi all,
    I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
    But if I add the webelement for Excel sheet ,It shows the control.
    How can I add web element for SAP System? Can't we use web controls in SAP system ?
    Help me in this regard.
    Regards
    Hemalatha J

    Hi,
    We have the same problem, did you find the final solution?
    Thanks in advance
    Regards.

  • When Syncing my ipad, it does not show the business PO Box field from outlook which is the first line of the address

    Hi, I was wondering if someone out there could help me.
    I am trying to syncronise my outlook address book with my Ipad.
    The actual sync does work but it is missing the field Business Address PO Box, and this is where the first part of the address is stored, so when I try to look up an address on my ipad part of it is missing.
    However if I send the contact by email to my ipad as a internet format vCard it will import the whole address. However as I have 400+ contacts I really don't want to have to do it manually.
    Many thanks for any advice given.

    terminology is the issue here.
    Whilst AOL have refered to these additional email accounts as identities basically forever, they are not identities, they are email accounts. So simply add it to Thunderbird as an existing email account (File menu ) New> existing mail account

  • WT reporter does not show split for tax authorities!

    Dear all:
        I need to report for all employees some WTs of taxes, but wt reporter does not show the splits for them (to distinguish federal from statal authorities payments), it is like summarises all the same WTs... I tried payroll recon. report but this one does not output the data in ALV format (im in 4.6 version) so it is not useful to run in bulk
    Do you have any work around for this?
    I would appreciate any tip or workaround on this,
    Thank you!

    Hi
    1. Allocated costs are always treated as Fixed costs, unless you have booked the expenses in FI using Activity Type as Aux Account assignment object
    2. Check whether these costs are included in Inventory valuation in your Cost Comp Str in OKTZ... If not relevant for inv valuation, these costs wont show up for Variance calculations
    br, Ajay M

  • Report does not show Quotation price

    Dear friends,
    What may be the reason, that my report does not show the quiotation price, though Sales order price, revenue price shows normal?
    Please give some probabilities.
    Rao

    check your plan profile OPSB if automatic rev planning for both Quotation and Sales order is ticked

  • Battery Icon During Charging Does Not Show The Lightning Bolt?

    How can i fix my iphone 4? the little battery icon in the top right does not show the 'lightning bolt' while charging. Instead, it displays a power plug. If i unplug and reinsert the charging cable the icon briefly changed back into the lightning bolt but then switches back to the plug. Why is this?

    Does the iPhone show that it is charging, that is, does the percent charge increase?  If not it could indicate a faulty charger or connecting cable.  Can you try a different charger and cable to see what that does?
    Have you tried a power off/on and a reset to see if those help?

  • Oam does not show the correct configuration information

    Oracle apps,
    An issue with the oam.
    There are 2 nodes in our system. In 12
    One is for db and cm
    The other is for forms and apache.
    The system is running fine.
    But from the OAM, where it does not show the correct configuration info.
    From the OAM, all the services are (including db, cm, forms, apache) on one node.
    The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
    I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
    Autocfg on all tiers. But it didn’t solve this issue.
    How can I fix this OAM problem to make it show the correct information?
    Thanks,
    Lily

    Thanks for reply.
    Yes, I did commit it.
    The hostname information is correct.
    On oam, this web node is there but all the service actually running on this node is
    showing under the cm node .
    <TIER_DB oa_var="s_isDB">NO</TIER_DB>
    <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
    <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
    <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
    <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
    <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
    <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
    <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

  • SCCM console does not show the link to the report manager!

    SCCM console does not show the link to report manager.
    Any idea?
    thanks!

    Hi,
    The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

    The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

    Check your restrictions.
    Note that default apps cannot be deleted and thus will not have an x.

  • HT3207 My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't hsowing up?

    My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't showing up?

    Mac video card performance

  • I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

    I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
    do I have to partition it and name it first. -- if so just one partition?

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • App Signing Error, Number of Folios Does Not Match the Main Folio File

    Hi All;
      I have a 250 page standalone app that I am trying to compile for the Apple Store. I read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my user directory to capture the issue. Here is the snippet of the log that was created that, to me, shows why the app isn't being signed.
    46386 ERROR [main] codesign.Signer - Failure during signing
    java.lang.RuntimeException: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
              at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio(IPAOutputHelp er.java:272)
              at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio(IPAOutputHelper.java:1 92)
              at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)
              at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)
              at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)
              at com.adobe.devtech.codesign.Signer.main(Signer.java:46)
    46388 ERROR [main] codesign.Signer - Error: invalid package, number of folios does not match the main folio file (Folio.xml or Issue.xml) 251-250
    I've stripped out special characters from the article titles and re-built the app only to face the same error. I went ahead and created a new AppID in the Apple Developer Portal, created new provision files, and the error remains. I am now creating a new folio and importing the articles into the new folio to see if that will solve the "number of folios does not match" issue.
    Any help or insight would be amazing. Thank you all.
    -matt

    I created a new folio and imported all of the articles again. After hitting "Create App" for this new folio, at about 10 pages in a "PDF Export" error stopped the create app process. I went into InDesign to update the layout for the 10th page to see that the PDF export issue was stopping me from updating the layouts as well. Something in the InDesign file wasn't playing nice with the folio creation, so I created two new InDesign files, deleted the article, and built a new article from scratch. I was able to import the new layouts as a new article to the main folio and hit "Create App" again. This time there were no issues with the creation process. I synched up the provision files in App Builder and was able to code sign the application.
    I guess the moral of the story is to double and even triple check every article along the way to make sure there are no issues being introduced into the process that will ultimately cause headaches during the distribution phase of app creation!
    -matt

  • Mini Calendar does not show the correct date

    Hi there ,
    in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

    Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

  • Pop-out window does not show the video

    I am having a video chat, but the pop-out window does not show the video when the main window is minimized. I have the latest version installed. The same problem happened once a few months ago (with the latest version installed).I searched online for quite a few days, but none of the solutions worked. Then one day the problem went away (mysteriously).   

    Do you have this issue with all your contacts or only contacts using Skype on a Mac computer?

Maybe you are looking for

  • Could not create Delivery in VL01N

    Hi Previously our Client use to sell some Trading type of material to their customer on Third Party Scenario basis....ie) They place the order with Vendor, inturn he directly send it to the Customer.... Now Our Client wants that material has to come

  • Wi-fi: No hardware installed after 10.9.3 update

    After updating to Mavericks 10.9.3 my computer will not connect via wifi. I had to go out and purchase a USB to Ethernet. The bluetooth option definitely works. The wifi option in system preferences won't allow me turn it on. Wi-fi is not an option w

  • How come people can't see my pictures I send?

    I am set up for unlimited text, picture mail, etc. through t-mobile but when I send a picture people tell me they can't see it. Help! Thanks! Solved! Go to Solution.

  • Cover in ipod fifth generation

    why appears on my ipod a cover for a song, different from the original one in my itunes ?

  • Some error in logic. unable to decipher

    This program is not giving the desired output. It is accepting a two dimensional array of marks and subject code.in the super class constructor. Calculating the points of the marks with the formula, of the respective subject code, and sorting for the