Report for authorization check

Hey Masters
Need your help
How do I generate a report which will give all the changes made in which infotype & by whom
I have checked the standard report s_ahr_61016380 but it does not give any output
How do i configure this report
Plz help
Jayeeta

hello
go to
Personnel Management
-> Personnel Administration
-> Tools
-> Revision
-> Set up change document
and follow documentation
regards
Stefan

Similar Messages

  • Report for Void Checks

    All FI Gurus,
    I would like to know if there is a Report for Void Checks with reason codes.

    Hi Gurus,
    My issue is more relevant to voided payroll checks - The payroll check register (FCHN) lists checks that were voided but it doesnu2019t show the u2018Amountu2019 voided (column Amount Paid (FC) ). I need a list of all voided payroll checks for a selected period with the amount voided as it needs to match what the bank says was stopped.
    Any suggestions? Many thanks!
    - Tarun

  • Command For Authorization Check

    Hii...Dudes...
    Can Any one tell me..What are the Commands and Procedure to do Authorization Check for Programs..
    Any documentation could be help ful...
    Tell me How to create ....an Z Object and tell me procedure too...
    points will be rewarded .........
    Regards,
    sg.....
    Edited by: Suneel Kumar Gopisetty on May 17, 2008 12:10 PM
    Edited by: Suneel Kumar Gopisetty on May 17, 2008 12:21 PM

    hi,
    go to this link it will be useful.
    http://help.sap.com/saphelp_nw04/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
    authority-check object 'S_TCODE'
                    id     'TCD'
                    field  'SM35'.
    if sy-subrc ne 0.
      User does not have authority for transaction SM35!!!
    endif.
    Do you want for the Creation of Zoject means using oops concept.

  • Standard report for Vendor check numbers

    Is there a standard report that can be used to link the vendor to the check number.  I am looking for a report like FBL1N that has the check number in the ALV grid so I don't have to drill into the vendor so see the check number for that journal entry.
    Thanks
    Ryan

    Hi
    In FBL1N itself you can get the cheque number.
    Regards
    Sanil Bhandari

  • Crystal report for authorization

    Hi Experts,
    I have BW query which belongs to authorization relevant it is working fine  so if i execute this query in crystal it is showing all the data  and authorization variable is not working so if any worked on this issue and please pass your inputs on this issue.
    Regards
    RK

    Hi RK,
    Helpful Links:  Handling Hierarchy Authorizations in SAP BEx BO Integration
    Authorization variable set to "Ready for input" does not create a parameter
    BEx Authorization Variable behavior in Webi & Crystal Reports
    I am not working on authorization variable but myself i searched and provide some useful links.
    Thanks,
    DJ

  • Report For Incoming Check Receipts

    Hello All,
    Was wondering if anyone is familiar with the report listing all your manual incoming check payments. I know for outgoing payments the standard report is S_ALR_87012104 and would like a similar report only now for incoming manual checks that one has posted in the system. I would like a listing at any time; at days end or even during the day.
    Thank you.
    P.

    Check with :
    S_ALR_87012103
    S_ALR_87012105
    Thanks
    Seshu

  • A/P Report for Cashed Checks by Vendor

    Fi experts,
    I sthere a report that I can pull that can give me checks that have been cashed, by vendor? I tried the check register but it doe snot gives you option to enter vendor name.
    any ideas?
    Edited by: Frank on Jul 10, 2008 8:09 PM

    Thank You, this gave me the information,
    I have another question for you
    Is there a way that I can pull a report that will give me all Unpaid Goods Receipts?
    I am trying to create a report to see our total liability by vendor that will give me total unpaid invoices, and goods receipts that have not been paid.
    Thank You for your help,

  • ISE reports. Need report for Authorization Profiles

    in ISE 1.1.1 pack 2 how do I run a report that will give me all authorizations with the blackhole_wireless_access for the past 2 months?
    TIA
    Scott

    Operations -- report / Catologs -- AAA protocols -- Radius Authenitications -- Run and Query
    narrow down focus as best you can.  for instance by device name. and specify time range.  (note DB rewrites)
    then export to CSV.  Select the Identity_Store and Authorization_Policy along with user, times, etc.
    Sort CSV by empty identity_store or default Authorization_Policy (default).
    Thanks Justin @TAC
    Scott

  • Badi for Authorization check

    Dear Friends
      I am working on a issue to check authorizations for role in my CRM BSP application. I am checking the authorization to give access to the application, like
    when user id = sold to party  allow only display and edit.
    when user id = bill to party allow display
    when none of the above No access..
    to achieve this i am using this badi
    IF_EX_CRM_ORDER_AUTH_CHECK~CRM_ORDER_ADD_AUTH_CHECK
    Here I am passing guid id to crm_order_read.
    but I am not recieving any data back in importing parameter. 
    I am just passing the guid_id + authorization flag set 'X'.
    would you like to tell me what is this guid_id.  is it what partner_guid ?
    This is my primary code:
    MOVE iv_header_guid TO wa_order_guid.
    APPEND wa_order_guid TO order_guid.
    CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
       it_header_guid = order_guid
       iv_no_auth_check = auth_check_flag
    IMPORTING
       et_orgman = org
       et_partner = partner_order
    CHANGING
       cv_log_handle = y_lv_log_handle
    EXCEPTIONS
       document_not_found = 1
       error_occurred = 2
       document_locked = 3
       no_change_authority = 4
       no_display_authority = 5
       no_change_allowed = 6
       others = 7.
    IF partner_order IS NOT INITIAL.
       flag = 'X'.
    Else.
       flag1 = 'X'.
    endif.
    IF flag1 EQ 'X'..
       RAISE no_authority .
    ENDIF.
    endmethod.
    please tell me where i am doing wrong. In order to achieve this task what else need to be done.
    Any help will be appreciated..
    Thanking you
    Regards
    Naeem

    CRMD_ORDERADM_H

  • For authorization check

    AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
            ID 'DICBERCLS' FIELD 'MA'
            ID 'DICBERCLS' FIELD 'VCOR'
            ID 'ACTVT FIELD '02'
            ID 'ACTVT FIELD '03'
    Please confirm me that above code is auth check for mara table  for display and change
    and for TVKO table for display and change.
    do correct me if I am wrong
    where:
    'MA' IS OBJECT FOR MARA
    'VCOR' OBJECT FOR TVKO.
    anutosh

    Hi,
    AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
    ID 'DICBERCLS' FIELD 'MA'
    ID 'DICBERCLS' FIELD 'VCOR'
    ID 'ACTVT FIELD '02'
    ID 'ACTVT FIELD '03'.
    The above code ll check if dat user(who runs it) has change('02') authorization for auth grp 'MA' and  display('03') authorization for auth grp 'VCOR'........
    Cheers,
    jose.

  • Report for all checked out files

    is there a way to get a report of all files in Version Cue that are checked out?

    You should ask in the Version cue forum.

  • Any BADI or USER EXIT for Authorization check in ME51N

    Dear MM Gurus,
    My requirement is to assign Authorization to the User to create Purchase requisition based on the combination of Plant and Storage location. Is there any BADI or User Exit available to achieve this?
    Regards
    Yoga

    hi,
    > Its not possible to have the authorization for PR at storage location level...
    > you can have authorisations for Puchase organisation EKORG, plantWERKS, puchase group EKGRP, puchase document type BSART ...
    > and authorisations objects are:
    >M_BANF_BSA :   Document Type in Purchase Requisition
    > M_BANF_EKG :  Purchasing Group in Purchase Requisition
    > M_BANF_EKO :  Purchasing Organization in Purchase Requisition
    > M_BANF_FRG :  Release Code in Purchase Requisition
    > M_BANF_WRK :  Plant in Purchase Requisition
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Apr 27, 2009 3:01 PM

  • How to take report for authorization in sap hr

    I am new to this feild . I was inquisitive about taking out reports.Can i take out report based on role.The reports contains which authorization object ,PA/PSA,EG/ESG,which planned version.
    I meant to say every thing which ever appears in the authorization objects..
    Please help

    You can get this info from table AGR_1251
    If you need to report on org levels too then you will need to use agr_1252 as well

  • Restore Organisation field for authorization check

    I´ve got a role in which a organisation field is maintained normally.
    Is there a Report which can detect the org-fields and repair them?

    1st you need to collect all the technical name of org level field (refer table USORG). Then in table AGR_1251 restrict data to these fields only. Where ever you do not got a value not start with "$" is the data you need. Sort by value column can help you in that.
    To fix this in the role beside the org level field you have a delete button. That will overwrite manually maintained values with NORMALLY maintained value in org level ;-). Careful you may loose data during this process, so may need to fix org level data at 1st place.
    Regards,
    Arpan Paik
    Edited by: P Arpan on Mar 5, 2012 8:21 PM

  • User Group for Authorization Check

    I created a user group called SYSTEM and assigned all our companies system accounts to it. Two examples of additional SYSTEM accounts I added to the SYSTEM user group are: DDIC & SAPBATCH. I did not register this group or apply any special conditions. Since doing so, several system accounts constantly become locked.
    Is it safe to delete the SYSTEM user group?
    Please assist...

    Hi
    Did you create it on SAP Service Marketplace?
    thanks and regards Martin

Maybe you are looking for