Report for Partnership hierarchy

Hi,
I would like to know if there is a way to show the partners of a partner into a report. I'm able to show for each Account name which are the names of the partners for that account, I'm interested to reiterate such information in order to have the partnership hierarchy into a report. Is it feasible?
Thank you
Ivano

I opened a SR to Oracle Support, here below the official answer:
"It is not possible to build a report this way. At max you can have only two level of hierarchy in reports like Account and its child."

Similar Messages

  • Standard SAP report for vendor hierarchy

    Hi Gurus,
    Does SAP have standard report for vendor hierarchy?  We want to use vendor hierarchy to capture all the expense to a list of vendors and wondering if we can utilize some standard report to see the total supply or we should develop custom reports to handle them?
    Thanks a lot

    Hi,
    Check this link
    http://help.sap.com/saphelp_45b/helpdata/en/12/084635470311d1894a0000e8323352/frameset.htm
    Thanks
    suresh

  • Error in report for activated hierarchy

    Hello Experts,
                          I have following problem in my report:
    I have created 1 hierarchy for 0cust_sales infoobject other than Standard hierarchy.to get this hierarchy in place have done following steps:
    created authorization object with 0cust_Sales + Authorization for hierarchy infoobject 0TCTAUTHH and actiavted it in required data target.
    created authorization value for above hierarchy and maintained in the user role.
    then created 1 report where hierarchy for 0cust_Sales is active and 1 authorization variable has been created for that hierarchy and restricted 0cust_Sales.
    in my data target already 1authorization object is active which is based on 0sales_off.
    in my report where I have assigned 0cust_Sales hierarchy, 0sales_off hierarchy is also maintained.
    Problem comes when am executing the report where 0cust_sales hierarchy is not active with message - NO MASTER MAINTAINED FOR 0CUST_SALES HIERARCHY.
    My problem is, I want 0cust_sales hierarchy only in 1 report but as auth object of 0cust_Sales is active on data target, error comes whenever report NOT CONTAINING 0CUST_SALES hierarchy is executed.
    How to deal with the situation where hierarchy required only for 1 report..please guide me

    Thanks Ingo. We are going to open the case.
    Do we need to pull consistent detail objects of all the13 levels in the hierarchy to the WebI query ?
    For Example, I have pulled all 13 level dimension objects (Blue), Org unit Key (Detail Green Object) for only L03,L04 and Org Unit Medium Name  (Detail Green Object) for L08,L09.
    Do I need to pull all 13 dimension (Blue Object), all 13 Org Unit Key and all 13 Org Unit Medium Name? I mean do we need to select consistent detail objects consistent across the levels?
    Thanks
    Jai

  • Report for equipment hierarchy using IH03

    In IH03 what is the significance of the fields display as graphic and Bom Application and Bom group?
    Edited by: Pallavi Kakoti on Jul 19, 2011 8:43 AM

    Click "As Graphic" if you want to display equipment in graphical hierarchy.
    BOM Application is used to display BOMs  of specific application area in the equipment hierarchy report .If you choose "INST" as BOM application then only plant maintenance BOMs will be display in the equipment hierarchy,
    BOMs can be defined for different application areas like plant maintenance ,production,costing etc
    Regards,
    Tehsin

  • SQVI Report for SAP CRM Product Hierarchy and its Product

    Hi
    How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
    I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
    or Is there any chance of getting related tables so that I could try more for this requirement.
    In which table both product id and its category Id can be found?
    Pravin

    Thanks DJ
    Is there any possibility to get a report for product hierarchy in SQVI ?
    say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
    Parent category Id->
                                    Level2 Category Id->
                                                                     Level 3 Category Id->                                                                               
    Level 4 category Id ->                                                                               
    Product Id's
    (I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
    Is there any possiblity to achive for generateing a report?

  • SAP Report Painter - SAP tables for report items and hierarchy

    Hello,
    can you pls. help me with an information about the list of SAP tables for Report Painter, particularly the tables where the report items/positions and report hierarchy are stored?
    for example, for the Report Writer report items and report hierarchy can be found in T8* tables.
    What are these tables for Report Painter?
    thank you in advance for any info.
    Regards,
    Jasminka
    Edited by: Jasminka Vlahovic on Dec 29, 2010 8:53 PM

    Hi  Jasminika ,
    Could you please share with me those tables names where report items  and hierarchy are saved
    Regards
    Neeraj

  • Hierarchal Report for Fund Centre Hierarchy/Group for Total Records

    Hello Gurus,
    I need to check if there is some Hierarchal report in FM which displays the data as per my Funds Centre Hierarchy or group. Like there is a report in Cost Centre Accounting (S_ALR_87013611) which displays the figures according to different grouping on the left hand side of the screen.
    In FM report for example if I will go to - FMB_PT01 - Totals Records report and populate the Funds Centre Group then system populates the report for the relevant funds centres in that group individually but do not group the figures logically as per the group structure like we have in Cost Centre Reporting.
    Please advise if there is any such kind of report or is there any possibility of creating a report painter/writer or we need to go for fully customized report.
    Thanks in Advance!
    Regards
    Rohit

    Hi,
    This is a standard feature with Report Painter reports. S_ALR_87013611 is a Report Painter report in library 1VK report 1SIP-001. There are 4 standard FM reports in Report Painter library 4FM. You can also define your own FM reports under library 4FM. Please see the link below on how to create a report:
    Report Painter / Report Writer - SAP Library
    Regards,
    Ming

  • Display different level for same hierarchy value in BO 4.0

    Hi Expert,
    I have one question for Webi for BO 4.0
    We have one hierarchy in BW side and we hope to display differet level in same report for different column
    For example, column A is for level 6. column B is for level 7.
    Do you know how to releaze this in Webi side?
    In the 3.X version, we have different dimension for different level.
    But now in BO 4, it has been combined into one\
    Thanks and best regards
    Alex yang

    Hi,
    You can still do this in BI 4.0, if you use the old 'legacy'  MDX OLAP.unv from Universe Designer tool .
    Yes, with the BICS connection,  you are getting a native hierarchy, as it would be displayed in an OLAP environment.
    Cheers,
    H

  • WIP QTY. AND VALUE IN SINGLE REPORT FOR A PARTICULAR PERIOD

    Is there any report for a particular period that we can get the WIP qty. and value in single report. If there what the fileds we have to select.
    Ex. We want what is the consumption qty. and value and what is the GR qty. and value for the period ending June 08.

    Hi,
    You can use the T-Code KKAS to get the WIP Qty against a given plant/material combination.
    some of the other supporting t-codes are:
    KKAO                 WIP Calc.: Collective Processing
    KKAQ                 Display WIP - Collective Processing
    KKAT                 WIP Display for Product Cost Coll.
    KKAV                 WIP Calculation for Cost Object Hier
    KKAW                 WIP Display Cost Object Hierarchy
    KKAX                 WIP Calculation for Order
    KKAY                 WIP Display for Order
    Regards,
    JLN

  • Reporting by org hierarchy with drill down by each level of reports to...

    Hello,
    I'm trying to determine how to aggregate reporting by org hierarchy. Utlimately to report on opportunities at the highest level (CEO; all opportunities below CEO) then a second drill down report that shows summary by Level 2 (all those who report to the CEO), then again by Level 3 drill down which would be those who report to somone in Level 2. In all instances I want the report to show all records that ultimately roll up to that level (thus include direct reports alll of their direct and indirect reports )
    Level 1
    CEO $10,000,000 200 Optys
    Level 2
    Sales Leader 1 $ 3,000,000
    Sales Leader 2 $ 2,000,000
    Sales Leader 3 $ 1,500,000
    Sales Leader 4 $ 3,500,000
    Level 3
    <ul><li>- rollup of all that report to Sales Leader 1 (and so on) aggregated by first level of direct reports ($3,000,000)
         Sales Mgr 1.1 $ 1,000,000
         Sales Mgr 1.2 $ 500,000
         Sales Mgr 1.3 $ 750,000
         Sales Mgr 1.4 $ 250,000</li>
    </ul>
    I'd appreicate any help you can send my way.
    Thanks, Aaron

    Hi Aaron,
    I have come across this and found that using the "Reports To" hierarchy and "Territory Team" hierarchy are not sufficient. I implemented this as a solution for one of our clients and it works very well:
    I have modified the user entity and renamed 4 standard fields:
    •     Business Unit renamed to "Primary Line of Business"
    •     Business Unit Level 1 renamed to "BU Group"
    •     Business Unit Level 2 renamed to "Business Unit"
    •     Business Unit Level 3renamed to "Team"
    Not all fields go through into analytics so I had to use these fields which are available in the Opportunity-Product History subject area. The downside is that they have to be text boxes so restrict access to who can populate these. From this you can get 4 hierarchy levels and drill from one to the next. The record owner then becomes the lowest level in your report and it can look something like this:
    Level 1
    Primary Line of Business
    Level 2
    BU Group
    BU Group
    Level 3
    Business Unit
    Business Unit
    Business Unit
    Level 4
    Team
    Team
    Team
    Team
    Level 5
    Sales Person 1
    Sales Person 2
    Sales Person 3
    Sales Person 4
    Sales Person 5
    Obviously it would appear side by side in the report..
    Thanks

  • Long Text in Crystal Report for Enterprise 4.0

    Hello,
    I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
    The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report.
    The Characteristic is 'Item' (0CS_ITEM) and upon going to SAP BW > RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
    Can I display long text in the Crystal Report? How?
    Thanks,

    Hi Jothi,
    Short Text and Long Text are associated objects of a Characteristic from a BEx query.
    The 'Short Text' will not turn to 'Long Text' by setting the 'Can Grow' option.
    In Fact, both are completely different objects.
    -Abhilash

  • Key instead of Text in Results Object in Crystal Reports For Enterprise

    Hi All
    I recently developed a report in Crystal Reports for Enterprise and at some point afterwards the text description of the hierarchy used in the report was changed.  The Key remained the same, however this caused the report to crash.  The solution was to click Edit Query Option in the Results Objects and simply come out without changing anything.  This refreshed the results object pane and the report ran as normal.   I work in an environment where the text of hierarchies is liable to change frequently and without notice and it will be unfeasible for me to constantly refresh the results object every time a change to a hierarchy is made.  Therefore is there a way to define in CRE to use the Hierarchy key instead of the text as this is less likely to altered?
    Many Thanks in advance
    Neil

    Excuse me I have my terminologies mixed up, what I mean is the name of the characteristic used in the report.  An example would be a characteristic called with the text of "Material" and a key of "0MATERIAL", if I were to change the text description to "MAT" and the key where to remain the same.  This would cause crystal report to error because it expecting the Characteristic name to be "Material".  Is there a setting or something in CRE to have it default to the key only so if the text of a characteristic or even a key figure for that matter where changed there would be no impact to the Crystal report.
    I hope this makes more sense this time round
    Thanks
    Neil

  • Run a query multiple times in the same report for different nodes in Hier

    Hi,
    I have created a query as per my requirements. But my issue is I need to run the report for all the profit centers in a hierarchy. Right now I enter a node value of the hierarchy in the variable and I get the result. But I want to run it for each node in the hierarchy and display the result in the same report.Is it possible to do so in web using information broadcaster or any BI 7.0 tools. Has anyone done similar to this in web. I would prefer the web route rather than the excel but if excel is the only answer I will follow the excel path.
    Looking forward to your suggestions on this.
    Thanks,
    Kal

    Hello Kal,
    if the number of Profit Centers is limited, you could probably work with query views (one for each PC) and include all these into your Web Template.
    If this is not appropriate, I don´t know if there is any way of programming possible.
    Regards
    Cornelia

  • Sales report per Customer Hierarchy

    Hello
    We manage the credit of some customers by Customers Hierarchy, this is, we assign the credit limit to the main customer, and then, that credit could be used by the dependent nodes.
    Does anyone know if there is a report where we could check the sales per main customer, that includes the sales of the dependent nodes?
    Thank you in advance

    Enrique
    Can you not see it in the field 'Credit exposure' for the main customer in transaction FD33?
    You should get the cumulative exposure there.
    If not use VA05 or VA05n and create a variant for each hierarchy with all the customers and get a full listing with total sales.
    or you can use SIS to perform Standard Analysis for customer ( T code MCTA) and create a variant here again with all the customers in a hierarchy.
    Does it work?

  • Standard Vs Actual Cost report for Production Order

    Hi Expert,
    I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
    Please suggest standard report if available or FS for creating Z Report.
    Regards,
    Pranav

    Hi Pranav
    There are Standard reports
    Option 1
    You can use Product Drilldown reports in KKO0
    For this:-
    a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
    b. Run KKRV to collect data and then use KKO0 reports
    I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
    Option 2
    You can use Summarization Hierarchy KKBC_HOE
    For this
    a. Set up Summ Hierarchy in KKR0.
    b. Run KKRC
    c. Run KKBC_HOE report
    Br Ajay M

Maybe you are looking for