Report for po order quantity

hi there
i want to get the report for p/o order quantity as well open order quantity
if it is there in sap let me know soon
waiting for your response

Tcode: SQVI
Table: EKPO
Select delivery completion idicator and PO order quantity in "List Feild Selection".
This will display PO order quantity and if DCI is set.
Try to join table to get desired result.
Tcode ME2N with selection parameter M-OFFEN gives Open POs

Similar Messages

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Interactive Report for Pending Order

Hi Gurus,
Iam new to ABAP.
I have Requirement to display the Interactive Report for Pending Order Status Report which displays pending of purchase orders for material wise and Vendor wise .Using ALV. Can Any one help ...me which table data i need to read and what are the field required.
Thanks in advance.

Hi G K,
For pending order : VA05 (select open sales orders).
cheers,
Hema.

Rounding value for purchase order quantity

Hi Guru ,
i need help for logic LOT SIZE MRP.
In particolar i need of use the parameters of rounding for create the planned order multiple of the value.
Example for a requirement of 3800 pz whit a value rounding of 500 i vould want that the system create a planned order of the 4000pz.
I have tried insert this value 500 in the field "Rounding value for purchase order quantity" in the view MRP1 but after run MRP the system create a planned order of the same quantity of the requirement.
Thanks a lot for help
Daniele
PP TEAM

Dear,
OMI4, for lot size select Lot for lot order qty with rounding.
Either you can use the Rounding Value or you can use a Rounding profile in MRP2 view to round of your order qty and rouding value in MRP1 view.
Further you can check
Check FM MD_ROUNDING_VALUE
Regards,
R.Brahmankar

Report for internal order - year/period comparison

I want to create a report for internal orders with year/period (from/to) comparison.
For the present year/period i'm using CCA variables 1YRPERF (Fiscal Year/Period From) and 1YRPERT (Fiscal Year/Period To), created from field FISCPER, table RWCOOM.
Now i want to creat a column fot the n-1 period (example: if selected current period as 009.2013 to 008.2014 the n-1 period will be 009.2012 to 008.2013), any suggestion what can I do about this?
Regards
Carlos Aguiar

Hi Ajay
This is for higher education institution that have to report by fiscal year (01-12 months) and by academic year (09.year1 to 08.year2). I have two maps to do this but the challenge is to have a unique map that by dates could retreive both information.
I need a to have a column giving the total for example the Per/Yr 009.2012 to 008.2013 and other column with the Per/Yr -1.
I've tried your first option but doesen't work at all because don't work with a period like 009.2013 to 008.2014. Then i made some adjustments: first column was setted to Yr (variable: 6-GJAHV to 6-GJAHB) and Per (variables: 1NPERIV to 1NPERIB). The second column was setted with Yr (variable: 6-GJAH2 to 6-GJAH2) and Per (variables: 1NPERIV to 1NPERIB). Seems to work with a few tests!
Also i tried to creat new variables "1YRPERF" / "1YRPERT" to n-1, but had some problems with formula.
1YRPERF have a formula: '#S012-999' and 1YRPERT formula is: '#S012'.
To 1YRPERF-1 i've defined the formula '1YRPERF' -1, and for the Per to the formula '1YRPERT' -1, but seems to consider minus 1 period that the entry period. I've tried with -12 but didn't work too.
Thatk's for the help!
Regards, Carlos

Report for Issued component Quantity vs Subcontracting PO component qntity

Dear Expert,
My client wants to know a report on issued Component quantity (what is issued against a Sub- contraction PO) with PO component quantity (what is maintained in a subcontracting PO component).
Is there any standard report available for the same?
Please suggest if any query report can be built or not.
Thanks in Advance
Regards
Rajib Debnath

Do you change child qty consumption in p.o BOM ?
Check it in mb51 541 mvmt for material for issued component quantity.
Also check reports MBLB,ME2O.
Can you explain term
Report for Issued component Quantity vs Subcontracting PO component qntity

What is Lot-for-lot order quantity ?

as im newbie pls explain me in detail,
Thanks

Dear,
Welcome to SDN.
Lot sizing procedure "EX" and "Individual category" to have MRP generate individual planned orders for every requirement requirements.
For example:
Sales Oder A: 8 pieces (May 20, 2009)
Sales Order B: 12 pieces (May 30, 2009)
MRP Result
Planned Order: 08 pieces (May 20, 2009)
Planned Order: 12 pieces (May 30, 2009)
According to SAP: "On Lot-for-Lot Order Quantity; planning is carried out as per required quantity. This means that the system create order proposal proposal for every requirement as per required quanity.
Hope clear to you. As you are new on SDN please rewards the points for every useful reply
Regards,
R.Brahmankar

Report for open orders and amount of product confirmed

Hi All,
Can some one give me an idea on a report which shows open orders and also shows amount of product confirmed against these open orders?
Thanks,
Neelima.

Hi Veni,
Incomplete order are the order's in which some data is missing so that particular order can't be further processed, that is what you could check through "Incompletion Log". Whereas Open orders are the orders which are open for further processing viz. deliver billing(but open order is a complete order i.e. no data missing).
Check this program:
*& Report ZGM_OPENPO *
REPORT ZGM_OPENPO NO STANDARD PAGE HEADING LINE-SIZE 132 LINE-COUNT 36(2).
TABLES: t001w, "Plants/Branches
ekko, "Purchasing Document Header
ekpo, "Purchasing Document Item
marc, "Plant Data for Material
mara. "General Material Data
DATA:
BEGIN OF itab OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
beskz LIKE marc-beskz,
mmsta LIKE marc-mmsta,
END OF itab.
DATA: BEGIN OF iekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
menge LIKE ekpo-menge,
aedat LIKE ekpo-aedat,
wemng LIKE eket-wemng,
END OF iekpo.
DATA: BEGIN OF iekko OCCURS 0,
ebeln LIKE ekko-ebeln,
lifnr LIKE ekko-lifnr,
bedat LIKE ekko-bedat,
ekgrp LIKE ekko-ekgrp,
END OF iekko.
selection-screen:begin of block b1 with frame title text001.
SELECT-OPTIONS werks FOR ekpo-werks OBLIGATORY.
SELECT-OPTIONS matnr FOR ekpo-matnr.
SELECT-OPTIONS beskz FOR marc-beskz.
SELECT-OPTIONS bsart FOR ekko-bsart.
selection-screen:end of block b1.
INITIALIZATION.
AT SELECTION-SCREEN ON werks. "Validate for werks
SELECT SINGLE * FROM t001w WHERE werks IN werks.
IF sy-subrc 0. MESSAGE e429(mo). ENDIF.
AT SELECTION-SCREEN ON matnr.
SELECT SINGLE * FROM mara WHERE matnr IN matnr.
IF sy-subrc 0. MESSAGE e429(mo).ENDIF.
START-OF-SELECTION.
SELECT * FROM marc INTO CORRESPONDING FIELDS OF TABLE itab WHERE werks IN werks AND beskz IN beskz AND
matnr IN matnr.
SELECT ebeln FROM ekpo INTO CORRESPONDING FIELDS OF TABLE iekpo
FOR ALL ENTRIES IN itab WHERE matnr = itab-matnr AND loekz EQ space.
SELECT ebeln lifnr bedat ekgrp FROM ekko INTO CORRESPONDING FIELDS OF
TABLE iekko
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln AND bsart IN bsart.
SELECT ebeln menge aedat FROM ekpo INTO CORRESPONDING FIELDS OF iekpo
FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln. MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
SORT iekpo BY aedat.
DELETE ADJACENT DUPLICATES FROM iekpo COMPARING ebeln.
SELECT wemng FROM eket INTO CORRESPONDING FIELDS OF iekpo FOR ALL ENTRIES IN iekpo WHERE ebeln = iekpo-ebeln.
MODIFY iekpo INDEX sy-dbcnt.
ENDSELECT.
END-OF-SELECTION.
DATA : file_name TYPE string.
file_name = 'c:\pay_det\open_po1.xls'.
DATA : BEGIN OF it_join_fields OCCURS 0,
field_name(20),
END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'ebeln'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'menge'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'aedat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'wemng'.
APPEND it_join_fields.
CLEAR it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = file_name
filetype = 'ASC'
APPEND = 'X'
write_field_separator = 'X'
TABLES
data_tab = iekpo
FIELDNAMES = it_join_fields
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT iekpo.
IF iekpo-menge NE iekpo-wemng.
WRITE:/4 iekpo-ebeln,21 iekpo-menge ,46 iekpo-aedat, 56 iekpo-wemng.
ENDIF.
ENDLOOP.
if sy-subrc 0. write / 'no data exist for this plant'. endif.
TOP-OF-PAGE.
uline 1(80).
WRITE :/ sy-vline, 20 ' OPEN purchase ORDERs report' color 5,
80 sy-vline.
uline 1(80).
WRITE:/ sy-vline , 4 'PURSCHASE ORDER' COLOR COL_HEADING,
20 sy-vline, 21 'ORDER QUANTITY' COLOR COL_HEADING,
45 sy-vline, 46 'item change' color col_heading, 55 sy-vline,
56 'RECIEVED QUANTITY' COLOR COL_HEADING, 80 sy-vline.
uline 1(80).
END-OF-PAGE.
WRITE :/ 'PAGE NUMBER' ,SY-PAGNO.
Hope this helps you.
Regards,
Chandra Sekhar

I need help in Report for production orders for my customer.

Hi All
I have scenario where plant A needs the following report for Material XXX which has setting as Stock Trnasfer order from Plant B.
Need report withthe following details, Storage Unit number, Material No, Quantity, Planned Order Date in plant A, Date Produced in plant B, Date Received by Plant A.
Please tell me if there is any standard report to take the following details. Scenario is that the header material YYY in Plant A has one material XXX as BOM component. Now this material has setting as Stock transfer from Plant B. On creating a plan order for Header material it will create a Plan order in plant B for component XXX. The above said detail is required for component XXX in plant A.

Dear
Did you explore the report in CO46-Order Progress Report based on Sales Order /Material /Production Order
Or COOIS/COHV for your requirement.Here you can get the Planned Order Details and also Production Order Details .
Regards
JH
Edited by: Jiaul Haque on Sep 27, 2010 2:57 PM

Interactive report for sales order

how to create an Interactive Report which displays all the sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer.

http://www.sap-img.com/abap/program-for-sales-order-by-customer-date-sales.htm
https://forums.sdn.sap.com/click.jspa?searchID=2651341&messageID=1671145.
Have a look at the demo programs,
DEMO_LIST_INTERACTIVE_1
DEMO_LIST_INTERACTIVE_2
DEMO_LIST_INTERACTIVE_3
DEMO_LIST_INTERACTIVE_4
DEMO_LIST_HIDE
Please give me reward points.
Regards,
Murali Poli

Report for Maintenance orders-Plant Maintenance

Dear all,
I have some maintenance orders, in that i have done cost settlement for few orders through KO88.I want to take a list of settled and not settled maintenance orders.
Is there any standard SAP reports or any way to findout setlled /not settled orders.
Thanks in advance
Guna

Hi,
you can use the T code S_ALR_87013015 - List: Actual Debit/Credit in this you can specify the order group or use multiple selection for orders and excute you can find which order got settled and which order has balance. if it is helpful pls reward me with points
regards
satish

Report for Purchase Orders didnt reach target through ALE

Hi Experts,
we are sending Purchase Orders to Third party system using XI.
But some of the orders when we save its automatically system generating output medium is PRINT so these orders not going through ALE.
1)Can anyone please tell me why the system is generating PRINT instead of ALE distribution.
2) is there any report for how many purchase orders created for the day and how many of them gone through successfull using ALE distribution.
Answer will be rewarded.
Kiran

Hi
Have you configured the PO Output type/messages with the Medium as 'A'(ALE)
otherwise the system willd efualt take 1(print) as default medium.
Check the NAST table entries for that date created Output type of PO's
for all of them the Medium(NACHA) field should be A
then all will go through ALE
check them.
Regards
Anji

Report for purchase orders - like ME80FN

Hello,
is there a way to get a report of purchase orders which have been released for stock and for customer orders.
I tried ME80FN, but there is no column available such like account-assignment-category where I could separate the orders for stock from the customer ones.
Any ideas?
Thx a lot!
Cheers Wolf.

account assignment category is available in dynamic selection
So you can at least execute ME80FN per account assignment category, even the field itself is not shown in the final report.

Report for Production orders with name of Customers

Dear Expert,
Kindly suggest to view the production orders with customer numbers for which the sales orders is created.
I tried in MB51 with layout settings but the customer number comes out be blank despite the sales order number is populated for an production order.
Kindly suggst a way or any report in the system to get the corresponding information of production order number and corresponding customer name mentioned in the sales order .
Thanks in advance for your help and inputs..
Best regards,
Nitish jain

Nitish,
MB51 is a Material Document list. Many production orders exist that have no entries in this report, so it would be an unlikely candidate to be a solution for your requirement..
The standard production order reporting tool is COOIS. The output for MTO orders can be configured to display Sales order and Item and Soldto.
Obviously, displaying even the customer order number in COOIS is impossible in a MTS scenario.
In addition, a user experienced in using SAP Query (SQVI or SQ01/SQ02/SQ03) could also create a production order report without having to know ABAP, by properly linking tables AFKO, AUFK, AFPO (production order data) with VBAK (sales order header data) to get customer number, and KNA1 to get customer name..
If you are not expert in SAP Query, I suggest you discuss this requirement with a local ABAPer.
If you are feeling like educating yourself in the wonders of SAP query, try this doc. Although old, SAP query hasn't changed very much since this document was written.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Rgds,
DB49
Edited by: Dogboy49 on Apr 20, 2010 10:47 PM

Report for po order quantity

Similar Messages

Maybe you are looking for