Report for Req Material and Issue Material for Project/WBS

Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. Rajmane

Dear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane

Similar Messages

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Need a report on delivery status and response status for capaign recipients

hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanks

Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only.

Newby question: I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site...

Hi,
I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site.
I am using a trial right now, so I am not sure if I have all the necessary licences, but I am really new to this subject so a link to msdn page or blog item might already do the trick.
This is what I have right now:
https://www.youtube.com/watch?v=rV2_m4iWxSE
Thanks

No that is not currently available.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Any charge for free app and issues at Apple Store?

In case we need to create free issues or even apps for iPad (from a non-profit organization), what will the incurred costs be through the whole process?
i.e. From the time of development of issues and the app in which the issues may work - is there any registration or license fees involved, till it reaches all customers - provided the package is for free?
Any charge for free app and issues at Apple Store for iOS apps for iPad?

You must pay the USD$99 fee to join the Individual Developer Program.
After that, there is no fee to put free apps into the iOS App Store.

Material and representative material in PCA

Hello all,
I have an issue concerning material numbers in Profit Center Accounting. My aim is to be able to report on material group (attribute on 0MATERIAL) in BW for both plan and actuals.
In R/3 PCA they plan on field "representative material". Furthermore they post actuals on "material" field.
Extractor 0EC_PCA_1 brings all postings (plan + actuals) to BW, but does not include the "material" field. It only includes the "representative material" field, so I'm missing the possiblity to see the actuals per material number.
Extractor 0EC_PCA_3 brings all actual postings to BW and includes the "material number". However the representative field is not filled (since this is only actuals)
So I get what I need into BW, but in two different extractors (and also on two different aggregation levels).
I somehow need to merge the information of these two extractors. Is it a multi cube I should use here? Or should I rather try to modify 0EC_PCA_1 by adding the material number in an append structure? I actually tried this, but I still couldn't find the new field in the extractor. So I guess this is not possible here and that I have to go for the multi cube solution?
I need to get both the "representative material" and the "material" into info object "0MATERIAL" since the material group is an attribute of that. Could this work if I modify the update rules in cube 0PCA_C01 (this is filled with records from 0EC_PCA_1) so that repr. material points at 0MATERIAL (for plan values) and at the same time use cube 0PCA_C03 (this is filled with records from 0EC_PCA_3) which uses 0MATERIAL as standard (for the actuals).
I'd be extremely thankful for some ideas/help...
Thanks in advance!
best regards,
Fredrik

Hi Fredrik,
Some questions:
Is there a 1 on 1 relation between repr. mat. and material?
Do you have PCA_1 as Totals or Line Items?
If you want to report on material group you somewhere have to have a relation between repr. material and mat. group.
Of course you can always map the rep. into 0MATERIAL, but you MD has to be correct too.
And: Adding in PCA extractors is difficult!

Direct material and indirect material

please explain the what is direct material and indirect material and its different between them

Hi.
Direct materils: These material are bulkly needed and regularly needed for that orgnization to have their end product. these materials usually raw materials ....
Indirect materials: these materils are needed with direct materlias for the manufacture or to produce end product.
Ex: If your orgn's is cement Industry.
Direct materials: Silica Sand. etc..
Indirect matrials:BAG. Gypisum.....
Hope you are Understand with these example...
Regards
S B H

HT200197 NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

Hello Cravate,
The following article provdies some useful troubleshooting that can help resolve audio issues with your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Cheers,
Allen

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ?

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ? Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?

Contact a lawyer if you want to sue.
Otherwise try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT204053 i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?

It is not possible to merge Apple IDs.

Can I use a domain for one site and mobile me for a different site?

Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

Product costing configuration material and study material

Hi all,
Can any one pass me the Product costing configuration material and study material email id is [email protected]
thanks in advance
Regards
vijay
Edited by: vijay matlani on May 11, 2008 11:17 AM

hi
Product costing documentation
http://www.sap-topjobs.com/SpecialPP/746.html
nagesh

Possible to make an item editable for certain users and read only for other

Is it possible to make an item editable for certain users and read only for others?
I've been able to accomplish this by taken the select statement that I used to define an authorization scheme, placing it in the Read Only condition of the item. However, I would like to simply reference the authorization scheme to utilize caching, and to help keep things cleaner for future maintenance.
Is it possible to reference an authorization scheme in an item condition similar to the way another item can be referenced by preceding it with a colon (i.e. :P1_First_Name)?

Thank you, your suggestion worked.
It would be nice on a future release of APEX if a drop-down box existed under the Ready Only section that would allow an existing Authorization Scheme to be selected or negated when applying the Read Only attribute to a form item.

Report for Req Material and Issue Material for Project/WBS

Similar Messages

Maybe you are looking for