Report for Sold to Party code against Sales order number

Hi,
Is there any standard report to take out the Sold to Party code against Sales order number as i have the sales order number.
I don't want to use Tables ,so pls tell standard report if any.

Dear Monty garg.
You can use u201CVA05Nu201D to find the sales orders which have been created against for the particular customer/sold to party.
Please let me know if any further clarifications pertinent to this.
Thanks&Regards
Raghu.k

Similar Messages

Program terminated error after entering sold to party no. in sales order

hello friends,
                  can any help me, i was doing the topic of user exit for pre-defined sold to party using v45a0002 in cmod and i wrote a program for include 'if sy-uname= 'sapuser'.
message e000(0) with ' you are not authorised to create so'
endif
while activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite error
after i tried create a order
program terminated error after entering sold to party no. in sales order
so i have deactivated the project created in cmod & deleted the project inspite i am getting the program terminated error
i am sending total error plz reply quickly urgent friends
Runtime Errors         SYNTAX_ERROR
Date and Time          19.04.2008 17:51:58
ShrtText
Syntax error in program "SAPLXVVA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLVKMP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXVVA ", the following syntax error occurred
in the Include "ZXVVAU04 " in line 5:
"The last statement is not complete (period missing)."
Author and last person to change the Include are:
Author "SAPUSER "
Last changed by "SAPUSER "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXVVA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXVVA ", the following syntax error occurred:
"The last statement is not complete (period missing)."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "mtpl7"
Network address.......... "192.100.10.1"
Operating system......... "Windows NT"
Release.................. "5.1"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MTPL7"
Database type............ "ORACLE"
Database name............ "ERP"
Database owner........... "SAPERP"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 8362368
Heap..................... 0
Page..................... 122880
MM Used.................. 4229224
MM Free.................. 995472
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLVKMP"
Screen.............. "SAPMV45A 4701"
Screen line......... 16
Information on where terminated
The termination occurred in the ABAP program "SAPLVKMP" in
"SD_DETERMINE_KKBER".
The main program was "SAPMV45A ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
4
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
8
SY-COLNO
1
SY-PFKEY
U
SY-UCOMM
SY-TITLE
Create Standard Order kb: Overview
SY-MSGTY
E
SY-MSGID
VP
SY-MSGNO
106
SY-MSGV1
BUS2032
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
13 FUNCTION     SAPLVKMP                            LVKMPU41                               91
SD_DETERMINE_KKBER
12 FUNCTION     SAPLVKMP                            LVKMPU41                               91
SD_DETERMINE_KKBER
11 FUNCTION     SAPLV09B                            LV09BU30                              148
SD_PCHECK_PAYER_IN_CREDITAREA
10 FUNCTION     SAPLV09B                            LV09BU26                              296
SD_PARTNER_EXECUTE_CHECKS
9 FUNCTION     SAPLV09B                            LV09BU25                               57
SD_PARTNER_CHECK_BEFORE
8 FUNCTION     SAPLV09A                            LV09AU26                              342
SD_PARTNER_SINGLE_MODIFY
7 FORM         SAPLV09A                            LV09AF39                              176
PARTNER_SELECTION
6 FUNCTION     SAPLV09A                            LV09AU29                              820
SD_PARTNER_DETERMINATION
5 FUNCTION     SAPLV05E                            LV05EU01                              654
VIEW_KUAGV
4 FORM         SAPMV45A                            MV45AF0K_KUAGV_SELECT                  40
KUAGV_SELECT
3 FORM         SAPMV45A                            MV45AF0A_AUFTRAGGEBER_PRUEFEN          46
AUFTRAGGEBER_PRUEFEN
2 FORM         SAPMV45A                            MV45AF0K_KUNDEN_PRUEFEN               454
KUNDEN_PRUEFEN
1 MODULE (PAI) SAPMV45A                            MV45AI0K_KUNDEN_PRUEFEN                15
KUNDEN_PRUEFEN
Chosen variables
Name
Val.
No.      13 Ty.          FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000            000000000000000000000000         00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
FUNCTION=SD_PCHECK_PAYER_IN_CREDITAREADATA=LVT_CREDIT_XVBPA
Table reference: 275
TABH+ 0(20) = 70A2883B388BC43B0000000013010000CF060000
TABH+ 20(20) = 020000001E020000FFFFFFFF04910100D82F0000
TABH+ 40( 8) = 02000000C1248400
store        = 0x70A2883B
ext1         = 0x388BC43B
shmId        = 0     (0x00000000)
id           = 275   (0x13010000)
label        = 1743 (0xCF060000)
fill         = 2     (0x02000000)
leng         = 542   (0x1E020000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000209
occu         = 2     (0x02000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x28C1883B
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 1     (0x01000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 2     (0x02000000)
lineAlloc    = 2     (0x02000000)
store_id     = 690   (0xB2020000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
hsdir        = 0x00000000
ext2         = 0x28A4883B
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x109C883B
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
I_KKBER
2222
0000
FCODE_KOMM_LIEF_MENGE_SICH
MOD2
44432222222222222222
DF420000000000000000
SYST-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
%_SPACE
2
0
FCODE_KONFIGURATION1
POKO
54442222222222222222
0FBF0000000000000000
CREDIT_CHECK
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
SY-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
SAV_BUKRS
SS00
5533
3300
CHAR_
2
0
%_DUMMY$$
2222
0000
AUTOMO_VOLVO
08
33
08
SPACE
2
0
FCODE_ABRUF_GENERIEREN
PABG
54442222222222222222
01270000000000000000
XVBRK
00000000          0000000
2222222222222222222222222222222222222222222222223333333322222222223333333222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
KOPGR_LIEFERPLAN
LL
4422
CC00
FCODE_ZUSAETZE_FAB
PFZU
54552222222222222222
06A50000000000000000
FCODE_REPARATUR
PREP
55452222222222222222
02500000000000000000
XVBKD
000000                                                 #####0000000000       ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
FCODE_GEFAHRGUT
KGGP
44452222222222222222
B7700000000000000000
I_KKBER_HELP
2222
0000
T001
800SS00SRIYA TEXTILES           HYDERABAD                IN INR EINT 10K41      0000050495DE1
3335533554542545544452222222222245445444422222222222222224424452244452334332222223333333333443
800330032991045849C530000000000089452121400000000000000009E09E20059E4010B410000000000050495451
FCODE_STOFFBERICHTE
IEHS
44452222222222222222
95830000000000000000
T001-BUKRS
SS00
5533
3300
No.      12 Ty.          FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000            000000000000000000000000         00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
I_KKBER
2222
0000
XVBKD
000000                                                 #####0000000000       ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
I_KKBER_HELP
2222
0000
No.      11 Ty.          FUNCTION
Name SD_PCHECK_PAYER_IN_CREDITAREA
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_CHECKTYPE
I
4
9
FIF_MSGTYPE
E
4
5
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_KKBER2
2222
0000
LVF_KUNNR
7000000000
3333333333
7000000000
SYST-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
LVF_KURGV2
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
FIS_SDORGDATA-SPART
SM
54
3D
FIS_SDORGDATA-VKORG
T000
5333
4000
FIS_SDORGDATA-VTWEG
S4
53
34
%_O_SD_PARTNER_CONTEXT-HEX_0004
1
0
LVT_CREDIT_XVBPA
Table IT_1743[2x542]
LVF_KKBER1
2222
0000
GCS_HERTAB
ABCDEFG
24444444
01234567
%_DUMMY$$
2222
0000
SY-SUBRC
0
0000
0000
LVF_BEFORE_PARVW
2222
0000
No.      10 Ty.          FUNCTION
Name SD_PARTNER_EXECUTE_CHECKS
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_MSGTYPE_TO_EXEC
E
4222
5000
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_ALL_PREDECESSORS_SUCCEEDED
X
5
8
FALSE
2
0
GS_MARKED_PARTNERS
222222222222
000000000000
LVT_CHECKCALLSTACK
Table IT_1515[21x52]
FUNCTION=SD_PARTNER_EXECUTE_CHECKSDATA=LVT_CHECKCALLSTACK
Table reference: 219
TABH+ 0(20) = E8C3863B0000000000000000DB000000EB050000
TABH+ 20(20) = 1500000034000000F00000000491010058090000
TABH+ 40( 8) = 15000000C1248000
store        = 0xE8C3863B
ext1         = 0x00000000
shmId        = 0     (0x00000000)
id           = 219   (0xDB000000)
label        = 1515 (0xEB050000)
fill         = 21    (0x15000000)
leng         = 52    (0x34000000)
loop         = 240   (0xF0000000)
xtyp         = TYPE#000033
occu         = 21    (0x15000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
collHash     = 0
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = 0x90BF863B
pghook       = 0x00000000
idxPtr       = 0x00000000
refCount     = 0     (0x00000000)
tstRefCount = 0     (0x00000000)
lineAdmin    = 21    (0x15000000)
lineAlloc    = 21    (0x15000000)
store_id     = 595   (0x53020000)
shmIsReadOnly = 0     (0x00000000)
>>>>> 1st level extension part <<<<<
regHook      = Not allocated
hsdir        = Not allocated
ext2         = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack     = Not allocated
delta_head   = Not allocated
pb_func      = Not allocated
pb_handle    = Not allocated
LVS_CHECKCALLSTACK_WA
80000018BUS2030   SD_PCHECK_PAYER_IN_CREDITAREA   XX
3333333345533332225455444445545455445454445454422255
80000018253203000034F03853BF01952F9EF325494125100088
GT_MARKED_FOR_DEL_PARTNERS
Table[initial]
LVS_CHECKCALLSTACK_WA-FUNCNAME
SD_PCHECK_PAYER_IN_CREDITAREA
545544444554545544545444545442
34F03853BF01952F9EF32549412510
GC_NO_ACTION
2
0
GC_NEW_PARTNER
I
4
9
GVC_PARTNER_CONTEXT
CONTEXT_X_SD_PARTNER_CONTEXT            fò####################################################
44454555555455455445544454552222222222226F0000000000000000000000000000000000000000000000000000
3FE4584F8F34F0124E52F3FE4584000000000000620000000000000000000000000000000000000000000000000000
GC_ERROR
E
4
5
GC_PROCESSMODE_DIALOG
D
4
4
LVF_MSGTYP
E
4
5
BUFFER_FULL_FILLED
F
4
6
POS_NUL
000000
333333
000000
BUFFER_PARTITIAL_FILLED
P
5
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES
0001000200030004000500060007000800090010001100120013NONE
33333333333333333333333333333333333333333333333333334444
0001000200030004000500060007000800090010001100120013EFE5
GCS_PARTNER_TYPE
KUAPLIPE
45454454
B510C905
LVF_RTYPE
0003
3333
0003
GCS_PARTNER_CALL_BACK_EVENTS
CHANGE    DELETE    NEW
444444222244445422224452222222
381E75000045C5450000E570000000
%_PRINT
000                                                                                0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCF_INITIAL_PARTNER
0
32
00
GCF_CALLER_TRANSPORT
T
5
4
TPACHECKRELATION
0000000000
2223333333333
0000000000000
GC_APPL_LOG
SDBFPD
54445422222222222222
34260400000000000000
SY-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
GVC_PARTNER_CONTEXT-B0007-PARVW
RG
54
27
No.       9 Ty.          FUNCTION
Name SD_PARTNER_CHECK_BEFORE
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LS_STATISTICS
########################4   ################
00000000000000000000000032220000000000000000
00000000000000000000000040000000000000000000
No.       8 Ty.          FUNCTION
Name SD_PARTNER_SINGLE_MODIFY
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BOKRE
2
0
FIF_CLEAR_APPL_LOG
X
5
8
FIF_DIALOG
2
0
FIF_HARD_DELETION
2
0
FIF_HISTUNR
00
33
00
FIF_HZUOR
00
33
00
FIF_INITIAL_VALUE
X
5
8
FIF_KNREF_PARNR
2222222222
0000000000
FIF_KUNNR_NEW
7000000000
3333333333
7000000000
FIF_KUNNR_OLD
2222222222
0000000000
FIF_LISTPROCESSING
2
0
FIF_MANUAL_ADDRESS
2222222222
0000000000
FIF_MANUAL_ADDRESS_ORIGIN
2
0
FIF_NO_CPD_DIALOG
2
0
FIF_NO_DIALOG
2
0
FIF_NO_MESSAGES
2
0
FIF_PARGR
TA
5422
4100
FIF_PARTIAL_NEW_DETERMINATION
2
0
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_PRFRE
2
0
FIF_VKORG
2222
0000
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FEV_ACTION_DONE
I
4
9
FRF_LOG_COUNT
0
0000
0000
SYST-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
GVT_LOCAL_CALL_BACK_MEMORY[]
Table[initial]
%_SPACE
2
0
SY-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
LVF_ACTION_TODO
I
4
9
GC_UPD_PARTNER
U
5
5
%_VIASELSCR
0
4
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES-SHIP_TO
0002
3333
0002
LVF_NRART
KU
45
B5
LVF_KUNNR_NEW
7000000000
3333333333
7000000000
GCS_ADDRESS_GROUP
SD01CA01
54334433
34013101
GCF_APPL_TABLE_SD
VBUK
5454222222
625B000000
LVF_ROLETYPE
0003
3333
0003
RSJOBINFO
00000000000000                                  ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LVF_MESSAGE_COUNT
0
0000
0000
%_DUMMY$$
2222
0000
GCF_ADDRESS_TYPE_CONT_PERSON
3
3
3
No.       7 Ty.          FORM
Name PARTNER_SELECTION
TVTA
000
222222222222222222222222222222222333222222222222222
000000000000000000000000000000000000000000000000000
TPAER
00
22222222222222332222
00000000000000000000
LVS_XVBPA
000000RG7000000000          0000000000000000000000050510
2222222222222333333543333333333222222222233333333333333333333333333332222222222222222222222222
0000000000000000000277000000000000000000000000000000000000000000505100000000000000000000000000
LVF_PARNR
7000000000
3333333333
7000000000
PIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
PIC_OBJECTTYPE
BUS2032
4553333222
2532032000
PIF_NO_DIALOG
2
0
PIF_PARGR
TA
5422
4100
LVF_PARVW
RG
5422
2700
PIF_POSNR

Hi Kartik,
Could you please be more clearer as to how do you want me to proceed so that this syntax error stops bothering me while creating a standard order thru TCode VA01.Also what do you mean by "well comment the code in the include and activate the include"
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted the project also inspite of this i am getting the program terminated error while making the order
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi

Change the Sold to Party(SP) in sales order in change mode

Hi,
Is it possible to change the Sold to Party(SP) in sales order in change mode?
If yes then How??
Regards
Somnath

Hi somnath,
It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
Goto VA02-->enter the sale order number.
Press enter.
In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
You cannot change the sold-to-party at the partners tab that is present in the Header details.
It will be greyed out.
If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
You are also going to see this message while changing.
And finally save the document.
Regards,
Krishna.

Security object for shipping conditions (T-Code VA02-sales order)

Hi
I need to gray out filed-VSBED (shipping conditions) in T-code VA02 (sales order change) for users, what could be the security object to be used for this requirement?
Regards
sri

The functional requirement till doesnt seem very clear to me , why would someone want to grey this field? (unless you have a strong case that you use different document types for normal orders, express deliveries, normal service, free of charge and a whole lot of possibilities)
Your SD consultant should guide and let you know that:
Shipping conditions are defined in customizing
you can eithe assign particular shipping conditions to particuar sales document types to make it as a default
(or) you can have the shipping conditions defined in the customer master
the ones set up in SPRO take a preference, but as you rightly noticed - if a use wishes to change the shipping conditions proposed by the system he would be able to do that, and this CANNOT be controlled with authorization objects
The only option you would have, is to find out if the users who are not suppposed to change the conditions beong to the same user group (or make a logical assesment on the common binding feature in the set of users)
then evaluate if you want to make the program changes such that the changes affect only the particular set of users
Note: Changes you make in ABAP do not necessarily apply to the complete user base - it depends on how well you analyse and plan the requirement

Reg.Raise PO without PR against sales order number

Dear priyanga
I want to raise PO against sale order,How to configure against sale order (200000346).
I configured against cost center for that I create Cost centre and G/L account and assignment that's all. Like what are the settings needed.
Pls help
Thanks
Rajakumar.K

hi,
I don't think its directly possible...to confirm this you can see the document overview, and press it ....you can see the reference documents from which the PO can be made...
SO for this develope first the PR then do Po for the same...
By the way you have written my name worngly...
Hope it helps..
Regards
Priyanka.P

Default sold to party coming in Sales order

Hi,
Whenever i am trying to create sales order the system automatically purpose a default number in the sold to party field.And there is no such customer master record maintained for this number.After deleting this number then i can able to create sales order.
How to resolve it??
Regards
Jyoti

Hi
i think there is a user exit so that u r getting default sold to party
It seems user exit V45A0002 is applied
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Press Save Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = ''.
If there is any value After E_KUNNR remove it
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder.
OR ELSE YOU CAN DEACTIVATE THE USER EXIT
regards

Mutiple sold to party in one sales order???

Hi,
Is it possible for one sales order have mutiple sold-to party???
If yes, how to do the split when in billing process for those mutiple sold-to parties?
Thank you.

Hoo laa,
Do the following
In Customizing for Sales and Distribution, choose Sales > Sales Documents > Scheduling Agreements with Delivery Schedules > Maintain planning delivery sched. instruct./splitting rules > Maintain Delivery Schedule Splitting Rules.
Enter a name for your splitting rule.
Enter a split share in the weekdays that you require for the forecast delivery schedule split.
Define how the system reacts when schedule lines falls on a holiday.
Specify how the system rounds schedule line quantities when generating a planning delivery schedule.
Assign splitting rule ranges to an instruction.
Choose Sales > Sales Documents >Scheduling Agreements with Delivery Schedules > Maintain planning delivery sched. instruct./splitting rules > Assign Delivery Schedule Splitting Rules.
In the dialog box, specify for which instruction you are entering a splitting rule. Then enter a splitting rule and specify its ranges in weeks or months.

Crystal Reports for SAP Print Output requirements like Sales Order O/P

Hello,
Has anybody used Crystal Reports for Sales Order or Invoice Print Output type requirements?
Typically these outputs get triggered via Output Management Configuration on Save of a Sales Order or Configuration.
Traditionally in the Output Management configuration of say Sales Order, we can specify the "Output Program" and the "Sapscript" or "Smart Form" or "Adobe Form".
How do we tell SAP t trigger a Crystal Report output if it is a feasible way to go?
Also can anybody tell what is SAP's strategic direction for Print Output requirements?
regards,
Atul

Hi Atul,
Do you have answers for your questions? If so, could you please share?
Thank you in advance,
Joã

Report for Material Numbers configured in KMAT Sales Order

Hi,
Scenario:
We are operating with KMAT material type. (e.g. ABC)
Material "ABC" has Characterstic Char 1 , Char2, Char3, Char 4
Each Char has Char values.
Sales Persons create the Sales orders by selecting approprite Char & Char Values. Via MRP, this lead to requirement generation for materials associated to the respective Char & Char Values.
Requirement:
For a given list of sales order numbers for the KMAT material (ABC),
I want to get the list of Material numbers associated to the Char & Char Values configured in these S.Os.
Thanks
Nitin

For the Function Modules, you would need to go to Transaction SE37. For CS_BOM_EXPLOSION I use the following Paramater Values, aukmng = 1, auskz = X, capid = PP01, CUOBJ = from the VBAP Table and line Item of the Sales Document VBAP-cuobj, datuv = current date, emeng = 1, mktls = X, mtnrv = VBAP-matnr, stpst = 0, svwvo = X, werks = VBAP-werks, vbeln = VBAP-vbeln, vbpos = VBAK-posnr, vrsvo = X.
For the Function Module VC_I_GET_CONFIGURATION use the following Parameter Value, instance = VBAP-cuobj.

How to validate Sold to party while creating sales order

Hi All,
I need to validate the sold to party which is entered when a order is created.
I able to read the Partner no using the FM u2018CRM_ORDER_READ_OWu2019, but how can I check if this partner number has u2018sold to partyu2019 function assigned.
Thanks & Regards
Shanthi

Hi Shanti,
There is a little twist in the validation that you intend to do to meet your business requirement. I will provide you with the Sap help link also. Have a look at this and you will understand the same.
[Partner Function|http://help.sap.com/saphelp_sm40/helpdata/EN/3c/92eceb484a11d5980800a0c9306667/content.htm] - Come to very end. Here there is a pictorial representation of how you can map a Partner function with the Business Partner Master Data. The system also maps in the similar way.
The Database tables which might be of help to you are BUT050 - Business Partner Relationship Category, CRMC_PARTNER_PFT - Definition of Partner Function Types. The rest you need to follow your own logic. I guess this will be enough to help you to get started. Let me know if you need any more inputs.
Hope this helps.
Thanks,
Samantak.

BAPI For PGI against sales order

Dear all,
I want BAPI for PGI(Post Goods Issue) against sales order.Can anybody suggest BAPI for this?

Hi,
Please check the link given below:
bapi for PGI
Hope it will help you.
Thanks & Regards,
Sarita singh Rathour

Need IDOC and segment for mappping the sales order number

Hi,
we need the IDOC name and segment for mapping the sales order number created by oracle in sap for transaction VA01.
Whether the sales order number created by Oracle can be used to create the sales order in sap using the idoc ACC_SALES_ORDER01?
. If we can do,then what is the segment and field for the sales order number in the idoc ?
Please reply asap it's very urgent
Thanks
Edited by: suresh kumar nandhagopal on May 16, 2008 12:07 PM

Hi,
IDOC for sales order is ORDERS05. Segment E1EDKA1, for field go to SE11 and enter E1EDKA1 to find field for sales order.
Cheers.
...Reward if useful.

User Exit to get Sales Order Number during creation

Hi,
I am looking for for an User Exit which provides Sales Order Number, during creation of Sales Order using transaction VA01.
Please provide the Structure/Field Name.
I tried USER_EXIT_SAVE_DOCUMENT. But, it seems it doesn't provide.Kindly help.

Hi:
Program : MV45AFZZ
search for USEREXIT_NUMBER_RANGE.
BR,
Manthana

Language issue for sold to party in sales order

Hi,
we have a sold to party A which is in china. the address for the same is maintained in local version and inetrnational version while creating customer master for A.
we aslo have a sold to party B, which is in Greece. the address for the same is maintained in local version and inetrnational version while creating customer master for B.
now we logon to sap and the language we select is Italian. we then go to t code Va01, then the first screen shows everything in Italian which is ok. we then enter order type and sales area. we then go to next screen and enter the sold to party A and we press enter. now the issue is the address against A is shown in chinese characters and not Latin ......... why so ??? we need the characters to be shown in latin and not chinese ?
if we make a sales order for sold to party B ( logged into sap in Italian language), then the address appears in Latin and not greece ..so this is ok !
but my question is why this is not happening for sold to party A ??? what settings i need to check in customer master and other settings. In fact how the language management works ??? and how we maintain the local and international version ? . can someone explain by taking my above example and also give possible solution to my question above for sold to party A
regds

Hi,
A cutomer displaying address in chinesse, even if you loging through Italian language,
I think reseon for this is you had created customer master in chinesse language,
Kapil

Sold-to party 1000003 and sales area PECC/10/02 (for ZWEB) are incompatible

Hello,
We're configuring SAP CRM 7.0 ISA with ERP Sales Order.
After login into ERP webshop, the system shows the error:
"Sold-to party 1000003 and sales area PECC/10/02 (for ZWEB) are incompatible"
I've already checked the following:
1) In Shopadmin: Combination of sales Area and Doc type in Webshop- IT's OK;
2) In CRM System: Catalog used has the right sales area combination- IT's OK;
3) In ECC System: If that document (ZWEB) is alowed to that sales area- IT's OK;
Does anyone can help with that??
Thanks & Regards,
Paulo Pela

Hello Developer,
Yes, I've checked the combinations of webshop(In Shopadmin) and Product Catalog.(Sales Area)
All of them are compatible.
Hey DJ,
When you say: u201Cthe first entry maintained in the USAPPLREF tableu201Du2026.in our case, there are 2 entries for my user (PPELA3). The first one is for object type BUS1006001 and object key nr° 23263-my contact person, linked to sold-to nr° 1000003), which is the employee that I 've created in the ISAUSERADMIN.
The second entry is with object type KNA1 with object key nr° 1000003 (which is the sold-to).
Those are the only entries for my user in this table.
Does this sequence have the influence described by you? Is that what you want to say?
Other point: Does the REFERENCE CUSTOMER is important for the B2B scenario? (Our case) Since I thought it was important just for B2C scenarios, It was the same number in SHOPADMIN Webshop creation.
In the meantime, I will create a new reference customer and change the webshop parameters.
Thanks for your inputs.
Regards,
Paulo Pela

Report for Sold to Party code against Sales order number

Similar Messages

Maybe you are looking for