Report Generation Tool Kit
Hi,
I have LabView7.1 and Labview8.0 installed in my pc.Recently i installed Report generation tool kit(version 1.0.1.0)
In the functions palette i couldnt able to see the Excel Specific VI sub palette and Word Specific VI sub palette.
Can u tell me what is the problem
Regards
Meenatchi
You can not see it in either version? Or has it been installed to the wrong version? There has been postings on this board regarding how to get it to install to multiple versions. I have not found tha to work. I go in a 'manually' copy the VIs from add-ons, examples, and help to the latest version of LabVIEW that I have. But if you look here you should find the help you need.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?
Similar Messages
-
Report generation tool kit for vista
Where can we get report generation tool kit software(for vista Operating system) link .one of my friend has given me that software.He said he had got it from internet.can anyone give me the link so that I can download report generation toolkit software (for vista)
Thanks
kiranmayiHi Kiranmayi,
You can download Report generation toolkit from the following weblink:
https://lumen.ni.com/nicif/us/evaltlktrepgen/content.xhtml
or you can send a mail to [email protected] stating your full address and your requirement and we can send you evaluation DVD for free.
Thanx
Gaurav -
Report generation tool kit not printing
I had the report generation tool kit version 1.01 for some time but never used it. I was comfortable with printing front panel vi 's.
But now I installed it on my computer with a windows 2000 and LabView 6.02 .
I created an application (executable) that will print (using the report
genartion tool kit). The application works fine in my development computer
(win 2000).
When I installed it on another computer with a win 2000, it prints as
expected
but when I try to exit I get a message from windows that the application is not responding (I have to go to task manager and terminate the application).
Both computers have word and Excell installed
I installed the application on a third computer (win 2000), but this com
puter does not have word or excell installed. The application does not print the
portion of the software that uses the report generation tool kit, but it can print the front panel of vi's (set to print an end of excution).
In all 3 computers, I have runtime engine 6.02 installed. My vi is simply
the example vi ""Sample test report.vi"", but customized to my application, printing standard report.
What is happening ?Based on what you sent, the version of Excel and Windows that are being used is a non issue since none of the code makes any calls to either one. They all refer to the older version of the report generation VIs that use NI's proprietary report generator.
I can think of two explainations. First, you aren't using what you think you are. Second, NI retained the same VI names when they went to the Word/Excel version of the generator, and I am linked into the old version.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Pareto Chart using Report Generation Tool kit
Hi,
Please help me to get clarification for the following:
I need to log data into MS Excel Report and generate Pareto Chart using LabVIEW for the Logged data.
I have Report Generation Tool kit. but i couldnt find the an option to generate Pareto chart with it.
Thanks,
Thirumala.One way is to Create a Excel template in the predefined format with the rows/colums linked for the Chart.
Use this template with report generation toolkit to populate data in the predefined cells.Based on that the chart will be automatically updated. -
I don't have any problems creating and filling an excel sheet with data. I use the New Report.vi, Easy Title.vi, and Easy Text.vi to create the file. I then save and dispose properly.
What I don't seem to be able to do is open the exsting file and append data to the end of the sheet.
Thanks in advance for your help.
toddHi Todd,
You can do this by creating a new Excel report with the existing excel file path wired to the "template" input. Then use "Excel Get Last Row.vi" (located under Report Generation\Excel Specific\Excel General) to obtain the location of the last row. Then use that location to input new data into the file.
Hope this helps,
Dan -
Hi i have installed report generation tool kit but i am unable to find a function
hi,
I have installed report generation toolkit full version and i have few example programms in which a function named generate report get data to modify.vi been used but i am unable to find a function pallet called Generate Report get data to modify.vi in my function list and when ever i try to RUN this example programm i get an error saying this function is not executable if i go inside that function again its showing the same error inside that function saying its not executable if any one knows about this VI pls help me
regards
narayanhi,
i have tried your method by going into
resorces i have opened the VI s there its not showing any error but how
to open same vi or call that VI while i am programming how i can
search those functions in my function pallet and i have a previously
written prog in LABVIEW 8 VERSION where he has used this functions and
he has made some SUB VIS using those functions and some of the contents
VI S of resorce he has put it in a folder so every time when i try to
open this VI it says dependncie issue it is trying to access the VI
FROM RESORCE AS WELL HAS FROM THE FOLDER WHERE PREVIOUSLY STORED HOW TO
SOLVE THIS PROBLE PLEASE HELP IF ANY ONE HAS SOLLUTION FOR THIS
REGARDS
NARAYAN -
I have problem with running excel macro in report generation tool kit
I am trying to use Excel Run Macro.vi but run into a problem: Exception occured in Microsoft Excel, The macro 'personal.xls!Macro1' cannot be found.. Help Path is C:\Program Files\Microsoft Office\Office\1033\xlmain9.chm and context 0 in Excel Run Macro.vi->example.vi
Also I tried to save the macro under the file that is active and I get the same results.
I saved the macro as *.bas file and ran it using Excel Import Module and did not see any erreos and it did not do anything.
Where a re some god examples that use the excel marco feature using the new report generation vis?masoud,
Try this example out and let me know if you have any more questions. Also, this is in LabVIEW 6.1 format. If you need it in a different format, please let me know.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask
Attachments:
Module1.bas 1 KB
TestAddMacro.vi 34 KB -
How to justify the values in table using report generation tool kit
Hi
How can we align the values in excel table using report generation toolkit.
like left,right,center.
Regards,
hari
Attachments:
Report_excel.vi 34 KB
New Bitmap Image.JPG 134 KBHi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :) -
Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed
Hello,
I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet. I have looked through all my documentation but cannot find anything referring to setting that.
What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
Any ideas?
Thanks
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW ArchitectHello,
LabVIEW should have access to everything that the excel ActiveX object publishes. One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire. This way you will have a macro which you can run that will do this for you. Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification. In any event, to help you with this process, below are some useful links. Also, you will find other threads on this matter if you search the discussion forums.
Excel and LabVIEW Integration Tutorial:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
Here are links to examples of using macros in Excel from LabVIEW:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear -
Excel Graph Legend Formatting - Report Generation Tool
Hi all,
I'm currently using the Report Generation Tool for Labview '11 and cannot seem to figure out how to edit the font properties for a graph's legend. Attached is a screenshot of an example output.
The Excel Graph Font.vi's Help file says that it should be able to modify the legend, yet I can't seem to figure out how to configure it to do so. If anyone can walk me through the steps or tell me what I am missing, I'd greatly appreciate it.
Solved!
Go to Solution.
Attachments:
excelLegend.png 33 KBChaoyD wrote:
Hello again,
It seems my team has decided to change direction and use Word instead of Excel. As such, I've been attempting to convert the VI ben64 provided, but I'm stuck on the ActiveX references... I've attached what I've done so far, but could someone help me (or instruct me) on making this VI work with Word?
Thanks.
The Word object model is probably the most complicated of the Office suite and you are loosing the calculation ability of Excel.
Attached is a vi to format the chart legend in a Word document.
Ben64
Attachments:
Word Format Graph Legend.vi 26 KB -
How to Use 2 Separate Y-Axis in Report generating Tool Kit
Hello
How do I make 2-Y-Axis chart on Word document from Report Generating Tool Kit?
Now can make Chart to appear in Word document with Multiple plots, but all plots go to same Y-Axis.
I want to put in chart two Plots with Same X-Axis, but different Y-Axis.
I know it is possible manually in word, but how can I do it with Labview RGTK?hmm, yes. I guess that is the only alternative. But is there anyone who has made something similar in the past?
I am not sure how to interpolate this data to an array of 30 000 data points without loosing data in the beginning.
Since it is exponential, the first few dozen datapoints are at really low freq. All about 10.xx Hz and increasing.
Then in the end of the array, i have like one datapoint at 15kHz, one at 15,5kHz etc. Will be alot of gaps in my array and alot of lost data in the beginning I think.
It's strange though that labview doesn't allow for waveform, or atleast let me put an XY-array into these methods since i believe always you want an logarithmic freq-axis when having a frequency-response to handle.
Anyway, anyone who has a nice little VI that interpolates data like this? -
Are report generation tools exclusively text-based?
Hi,
I'm using LabView 5.1.1, and have just explored the new (to me) report
generation tools. Handy though they are (I added the facility to print
results from my project in a nicely formatted report in just a couple of
hours) it strikes me that it would be even better if I could add bitmaps
to the report. This would let me add pretty logos, but obviously we
could do far more using LabView pictures/graphs etc.
There is no reference in the documentation or on the NI web site as far
as I can tell, but I can't be the first programmer wanting to do this.
Any hacks out there?
Best wishes to you all,
Allan Green
Medical Physics and Clinical Engineering,
Queen Elizabeth Hospital Edgbaston Birmingha
m UK
==================================================================
My views and opinions are seldom that of the institution for which
I work. I take that to be a healthy sign.
==================================================================I too have tried to use the report functions. They work fine for text only.
In the end I ended up scraping the idea and simply configured a vi (which i
called report.vi) to print at completion. I set the vi up with tables and
bitmaps the way i wanted it and called it as a sub vi (passing the data i
wanted printed to it) whenever i wanted a report printed.
It works really well. The only problem is that it must always be strictly
to a given format as defined in your vi.
I suppose you could hide some controls using attribute nodes (and maybe
enable others) if you didn't want them printed.
Cheers
John
Reinis Kanders wrote in message
news:[email protected]...
> On windows I have had success with using HiQ for report generation. I
> would manually create a template for a
> particular project, then send data using LV VI's to that template then
save
> it with different name or just print it.
> Using HiQ (free with LV 5.1) I was able to have pictures, graphs, you name
> it. Also since HiQ gets the actual data, then by saving HiQ file you do
> data logging as well, those HiQ reports can also be stored in database.
> I found HiQ approach to be more flexible than NI report generator,
only
> drawback is that it is not cross-platform portable. For cross-platform
> report generation I have been looking into some sort of XML based
approach.
>
> Hope it helps,
>
> Reinis Kanders
>
> "Allan Green" wrote in message
> [email protected]...
> > Hi,
> >
> > I'm using LabView 5.1.1, and have just explored the new (to me) report
> > generation tools. Handy though they are (I added the facility to print
> > results from my project in a nicely formatted report in just a couple of
> > hours) it strikes me that it would be even better if I could add bitmaps
> > to the report. This would let me add pretty logos, but obviously we
> > could do far more using LabView pictures/graphs etc.
> >
> > There is no reference in the documentation or on the NI web site as far
> > as I can tell, but I can't be the first programmer wanting to do this.
> > Any hacks out there?
> >
> > Best wishes to you all,
> >
> > Allan Green
> > Medical Physics and Clinical Engineering,
> > Queen Elizabeth Hospital Edgbaston Birmingham UK
> >
> > ==================================================================
> > My views and opinions are seldom that of the institution for which
> > I work. I take that to be a healthy sign.
> > ==================================================================
> >
> >
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 80,000 Newsgroups - 16 Different Servers! =----- -
How can i build exe which includes report generation tools,in labview 2010
I hv made exe.
I hv appended template word file to NewReport.vi.
when I m executing application,It is nt generating report.
Tell me the solution...!Try this: http://forums.ni.com/t5/LabVIEW/get-doc-report-generation-working-in-build-does-work-in-LV/td-p/1790...
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
Hello,
I need to generate a reports using chart images.Report should be either of PDF or PPT format.
I came to know like jasperreport,Velocity etc.
So which is the best tool I can use in generating report with respect to usability.
Please let me know.flounder wrote:
rayon.m wrote:
flounder wrote:
Which ice cream flavour do I like best?Cod liver oil?I'm not a cannibal.
Foster's?NFW! That stuff is awful. Australia makes 10,000 beers better than that swill.Oh I believe you flounder, I really do. -
Report generation tools from WLP behaviout tracking tables.
Hi All,
Can somebody suggest me tools that are available and can be integrated with WLP
8.1 for generating Report from default Behavoiur tacking tables provided by WLP??
Any pointers for such tools are also welcome.
TIA,
Prashanth bhat.Actuate will be coming out with an integration soon (targeted for April 5).
http://www.reportingengines.com/products/beaportal/overview.jsp#
Also, Web Trends can report on Portal Usage:
http://dev2dev.bea.com/products/wlportal/psc/details/WebTrendsforBEAWebLogicPortal.jsp
PS -
Crystal Decisions/Business Objects is working on an integration, but this
integration is not ready yet nor do I have a firm date.
"Prashanth " <[email protected]> wrote in message
news:40602855$[email protected]..
>
Hi All,
Can somebody suggest me tools that are available and can be integratedwith WLP
8.1 for generating Report from default Behavoiur tacking tables providedby WLP??
>
Any pointers for such tools are also welcome.
TIA,
Prashanth bhat.
Maybe you are looking for
-
I want to install both SQL Server and Team Foundation Server on the same machine. Operating system of my server machine is Microsoft Windows Server 2008 R2 Service Pack 1. I first install Microsoft SQL Sever 2012 Enterprise edition without any error.
-
I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck
-
Can't install oracle 9i on win XP pro
I've successfully downloaded oracle 9i Db (enterprise). I've tried to install it on three different pc (Dell dimension 4400) with same os (windows xp pro). Everything works fine, except only for one of them : when I try run setup.exe, nothing happens
-
Hi all, I'm having problems when trying to apply an ACL to my WLC dynamic interfaces. I have three WLANs that I wish to keep separated and am using ACLs that I have configured on the controller, the only problem is they don't seem to work! Ping test
-
Fontbook fonts not syncing with my software programs-after SuitCase Fusion Trial
I am hoping someone can offer some insight / help. I am frantic .....a graphic designer needing my fonts asap!! TRIGGER/ Problem arose today -- I installed and then uninstalled a trial version of Suitcase Fusion 3 today - and now 1/2 of my fonts are