Report into power point

Hi
I would like to display Bex report or web report into Power point, I never seen this feature anywhere, is there anybody has idea about this or is there any other tools are supporting. Thx in advance.
Regards
Venkatuk

hi TK,
do you mean capture the web report screen ?
if so try if software SnagIt helps
http://www.techsmith.com/products/snagit/default.asp
and check this thread
Web report to Power point
hope this helps.

Similar Messages

  • Embed dynamic smart view report into power point

    Hello All.
    can amyone help with How to Embed dynamic smart view report into power point
    Thanks.

    Have you tried dragging and dropping onto a ppt slide? I just did and showed up sheet one of the workbook. If you have many sheets in the workbook and want to show a particular sheet/data, you may want to save workbook with that sheet visible when you reopen. One thing I have not checked is dynamic content of the worksheet.
    Venu

  • How to export a PowerView report to Power Point in SharePoint Online? If it cannot be done,what is the alternative?

    How to export a PowerView report to Power Point in SharePoint Online? If it cannot be done,what is the alternative?

    Hi Tanay,
    I am not aware of a control you can put in PowerPoint, however, you can insert a web browser control and reference a page in SPO (or maybe even directly the path to the workbook, didn't try that).
    if you are using PowerPoint 2013 take a look
    here
    GALROY

  • Cropping web images to paste into power point

    I have a web image that I would like to crop using photoshop elements, and paste into power point with out a background.
    I used the magnetic lasso tool to out line the crop area, select cut, and when I paste it into power point, a rectangular background comes with it. How can I paste just the selected area?

    It is probably a format thing
    Jpegs do not have transparency. That is probably what you are using.
    Gifs have transparency. I think Tiffs and PNGs do also.
    Try one of those.
    I just noticed you used copy>paste
    Maybe you should try insert>picture>from file.
    If you can't get this to work, try matching the power point background in PSE. That will give you the illusion of transparency.

  • Can't embed a Captivate video (swf) into Power Point 2007

    I am trying to embed an Adobe Captivate video (swf) into power Point 2007. I very carefully followed all the steps outlined from a search I did on the web and it is not working.
    These are the steps I followed:
    1. Create a simulation using Adobe Captivate and publish it as a SWF file.
    2. Open the PowerPoint presentation and insert a blank slide for adding simulation.
    3. We need to work with the Developer tab now. If you can't see it in the ribbon, follow these steps to make it visible.
    (steps to get developer)
    4.On the developer tab, in the Controls group, click More Controls
    5. In the list of controls, click Shockwave Flash Object and click OK.
    6. Drag diagonally to create a box in which the simulation would appear. Don't worry about sizing it accurately; you can adjust it later as well.
    7. Right click the Shockwave Flash Object, and then click Properties.
    8. On the Alphbetic tab, click the Movie property. In the value columnm type the full drive path, including the file name.
    9. Set the Playing property to true, Loop to false and Embed Movie to true.
    10. Close the Properties dialog and test the movie.
    The simulation will now play in your PowerPoint presentation.
    Note: If during the slideshow,t he simulation doesn't play automatically, right-click and select Play.
    I followed these steps, and it is just not working. I go to play my power point presentation and set it to play from the beginning, and when it gets to the slide with the swf file, I just get a faded out still picture of the video, and it will not play.  If someone has had luck with embedding swf files from Captivate into Power Point, please let me know how you did it.   Thanks.

    Thanks, I really appreciate the information. The only problem is that I have to keep it as a power point presentation.   I convert from ppt to a video, so I need to keep it as power point.
    I found these steps on the internet and followed them exactly, and went through the steps 3 times, to make sure I wasn't leaving anything out, and it just didn't work. I have a tech guy who's supposed to call me today regarding this issue, and hopefully he'll be able to go through it with me step by step to try and work it out.
    Ultimately, these are going to be training videos that are going to be set up on a website, so they ultimately have to be saved as videos. 
    I'm keep trying to figure it out though.
    Thanks.
    Ariane

  • Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

    Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

    To answer some basic questions posted to aid people in helping me. These are
    I believe it is version 11 of iphoto as i tried to update but it says it has the latest update and Mac is 2 weeks old from new.
    OS is Lion.
    I have just tried to look everywhere on the Mac to see where the photos might be.
    There are no error messages showing on screen and it was fine before my wife did what she did. Even though we have back -ups of 95% of the pictures. I would like to know what happened so that it won't happen again.

  • Insert PDFs into Power Point with Adobe Reader 10 doesn't work

    Hello,
    When I try to insert a PDF Document into a Power Point Sheet (Microsoft Office 2003) the following an error occurred: "Die Serveranwendung , die Quelldatei oder das Element konnte nicht gefunden werden oder ein unbekannter Fehler wurde zurückgemeldet. Installieren Sie die Serveranwendung unter Umständen erneut." In English it would be somethink like: "Die Serverapplikation, the sourcefile or the element could not be found or an unknown error get recalled. According to the circumstances install the serverapplication again."
    The error appears when I click in Power Point on "Insert" then on "Object" and then on "OK" if the Adobe Acrobat Document is selected. The error occurred since I use Adobe Reader X on Windows XP and on Windows 7.
    Have anyone any idea, or know a solution?
    Greetings from Cologne

    Hallo Andreas,
    hier wie versprochen die Keys um den Geschützen Modus per Gruppenrichtlinie zu de/aktiveren.
    Der Key für Geschützer Modus wenn er aktiviert ist lautet:
    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\Privileged]
    "bProtectedMode"=dword:00000001
    Und demensprechend lautet der Key für den deaktiverten "Protected Mode":
    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\Privileged]
    "bProtectedMode"=dword:00000000
    Hallo Werner,
    wir benutzen hier Windows 7 x64, sowie Windows XP x86. Allerdings haben wir bei beiden Systemen keine Probleme wenn wir den Geschützen Modus deaktiveren.
    Kannst du mir vielleicht noch die nachfolgenden 3 Fragen beantworten, damit ich ein bessere Vorstellung vom Problem habe?
    Welches MS Office (bzw. PP) nutzt ihr?
    Über welchen Weg bzw. über welche Funktion wollt ihr das PDF in PP implmentieren/einbetten?
    Wie genau lautet der Text der Fehlermeldung?
    Grüße aus dem verregneten Köln
    Eike

  • Inserting a video into Power Point Slide

    I am using Power Point 2011 version 14.4.5 on my MacBook Air with OSX 10.9.5.  When I insert a video clip (mp4) into a new slide it plays fine but when I close the reopen the file it is a picture of the first frame and I can't play it.

    farmerpete
    What version of Premiere Elements are you working with and on what computer operating system is it running? What version of PowerPoint do you have? Background information for now.
    A prel file is the project file for a Premiere Elements project. It is not a video file that can be imported into non supported software.
    You cannot even open a Premiere Elements project prel in another project.prel.
    You can create a Timeline in a Premiere Elements project and export that Timeline to a  file saved to a format that is compatible with PowerPoint.
    And, then you Insert/Video that file into your PowerPoint presentation. With Microsoft PowerPoint 2010, this seems to be what is supported video-wise
    Please review, and then let us know if you need clarification on any of the above.
    Thanks.
    ATR

  • Linking a video into power point

    How do I link a prel video file into a power point presentation?

    farmerpete
    What version of Premiere Elements are you working with and on what computer operating system is it running? What version of PowerPoint do you have? Background information for now.
    A prel file is the project file for a Premiere Elements project. It is not a video file that can be imported into non supported software.
    You cannot even open a Premiere Elements project prel in another project.prel.
    You can create a Timeline in a Premiere Elements project and export that Timeline to a  file saved to a format that is compatible with PowerPoint.
    And, then you Insert/Video that file into your PowerPoint presentation. With Microsoft PowerPoint 2010, this seems to be what is supported video-wise
    Please review, and then let us know if you need clarification on any of the above.
    Thanks.
    ATR

  • Presenter not loading into Power point - help

    I need help
    Been using Presenter in Power Point.  it froze yesterday.  Had to shut down.  When re-opening computer and PP, Presenter was no longer there.
    Have uninstalled Acrobat 9 extended, Presenter , and MS Enterprise (with PP).  all new downloads.  Re-installed.  Everything acts like it installed fine, but NO Presenter inside the Power Point.  Have repeated and re-peated.  disabled McAfee.  repeated.  No luck.  I'm running on a pretty new HP with windows 7.
    Spent hours in chat with university helpers and hours with Adobe helpers - totally useless.
    Any ideas out there?
    Thanks
    Carolyn

    Try the Presenter forum:
    http://forums.adobe.com/community/connectpro/connectpro_presenter?view=discussions&start=0

  • Export Poiwer View and Pivot Report into PowerPoint

     Hi All,
             I have bunch of powerview and power-pivot reports I want to export or save the the report in powerpoint.When I try to saveas the reports I am getting only two options one is PDF and XPS.
            But I would like to save the reports into power-point.Can any one help mw how can i achive it.
    Thanks,
    Sid

    Yes, Power View in Excel  doesn't support export to Power Point. Only Power view in SharePoint mode supports export to Power Point. You can refer the link
    http://office.microsoft.com/en-001/excel-help/export-a-report-from-power-view-in-sharepoint-to-powerpoint-HA102834765.aspx?CTT=5&origin=HA102835634#_Toc346895615 for more details about the same.

  • Report download to power point doesn't show all records

    dear experts,
    I have a report with a tape deck below, so it shows only records 1-25. When I click download to excel, every record is downloaded (1-all rows) and this is fine. But, if I download to power point, only the records shown on the dashboard (e.g. 1-25) are downloaded into power point.
    Our quality assurance claims, that the behaviour for both download options should be the same, and not downloading to excel having every row and the power point showing limited rows.
    Is there a way to download the whole report, each row, to power point (without clicking on tapedeck to show all) ??
    Thanks in advance.
    best regards,
    Thomas

    problem solved
    modify report - results(answers) - click on printer icon (PDF and Print Control) - Print Rows - set to "All"
    regards,
    thomas

  • Now I have to covert my i tunes to MP-3  formate to insert them into a power point presentation These songs are in my i tunes library on my computer I know how stupid it sounds how to I get them into a file on my computer seperate from my i tunes library

    S LIKE i BOUGHT SONGS NOW THERE IN THIS I TUNES LIBRARY THING NOW HOW TO GET THEM INTO A FILE SEPERATE IN MY DOCUMENTS ITS LIKE HOW DO i BREAK INTO THE I TUNES STORE ON MY COMPUTER AND GET THE MUSIC i BOUGHT AND PUT IT INTO MY COMPUTER FILE DOCUMENTS SO i CAN PUT IT INTO POWER POINT PRESENTATIONS AND IN A FORMATE COMPATABLE WITH WINDOWS POWER POINT.  I DID IT ONCE SEEMS LIKE I FORGOT THE RECIPE I DID IT WHEN MY KEY BOARD WAS DOWN JUST WITH THE MOUSE I MAILED IN MY LAP TOP GOT THE MUSIC OFF INTO A M-P3 PLAYER GOT IT BACK GOT THE I TUNES CARD DOWNLOADED SONGS NOW THERE TRAPED IN MY I TUNES LIBRARY LOL !!! ??? 

    One way friends of mine have done it....use iTunes to burn a music CD with the songs (presuming it can still do that, haven't tried it in a while)
    THen close iTunes and open windows media player. Use that to convet the CD file to MP3 (media player's default is to pull things in as wma, so you may need to change the preferences to mp3, or i'm pretty sure wma's work in power points)
    Once media player converts the format you can insert it into your powerpoint.

  • Power point report using LabVIEW

    Hai,
    i am trying to generate some kind of reports in power point tthrough labview.
    I have been searching in the net. i don't get the complete details like creating new slide , editing it and so on. Rather i could get details only for running the slide show.
    i have tried with activex vis automation open.vi with the reference as MS- power point documnet window, slides ,etc.
    that vi throws "not creatable object" for almost all reference except power point application reference.
    Has anyone done this kind work with labview.
    If anyone has idea about this please tell me how to do this.
    Thanks,
    sathish

    Hello,
    I think you also sent an email.  I'll post some information for the masses as well:
    The following is a very useful msdn.com document - a useful place to find information about microsoft products such as powerpoint.
    Microsoft PowerPoint Objects http://msdn.microsoft.com/archive/default.asp?url=/archive/en-us/office97/html/web/006.asp
    For adding a slide, see the quoted text in that document and corresponding example which starts "The following example adds a slide to the beginning of Sample Presentation."
    Remember, the ActiveX API exposed by Powerpoint (or any other application with an ActiveX Server) is entirely independent of LabVIEW, so even a text based example suffices to elucidate the necessary calls to the API.  It turns out that with a "presentation" reference we can get a "slides" reference using a property node, and then get to the "add" method using an invoke node.  The attached screenshot (also shown below) shows how to expose this method in LabVIEW.
    Thank you,
    Message Edited by JLS on 06-30-2006 05:18 PM
    Best,
    JLS
    Sixclear
    Attachments:
    Powerpoint ActiveX Add Slide.JPG ‏21 KB

  • How SSRS report export to Power Point (PPT)

    Hi,
    Is there any functionality within SSRS 2008R2 which allows exporting a report to Power Point (PPT) ? We are using SSRS reporting service(SqlServer2008R2). Please suggest, how can we export report in Power Point presentation (PPT).
    Below are the details about Server
    Sql Server:-SQLSERVER2008R2
    .Net:-C#, VS2012
    Thanks & Regards
    Gajendra Paliwal

    Hi Gajju,
    According to your description, you want to know if there is any functionality within SSRS 2008R2 which allows you to export a report to Power Point. I am afraid there is no such a functionality to achieve it. This is a known issue which you can see in the
    link below.
    http://connect.microsoft.com/SQLServer/feedback/details/310639/add-rendering-of-powerpoint-to-reporting-services-export-format
    If you can use SSRS 2012 SharePoint Integrated Mode, we can create a Powerview report, and export this report to PowerPoint.
    Export a Power View Report to PowerPoint
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

Maybe you are looking for

  • Addition of a field in PO view

    Hi, We have a requirement from the client that in the PO view, when you click on Location details, there should be an additional field for `Street 2`. Can anybody help in telling me how this can be done?

  • Only one song is played at time

    My 80GB iPC only plays one song at a time then it resets by showing the Apple Logo Screen and then to the Main Menu. This happens when I try to listen to a playist, album, etc. Sometimes I can skip to the next song and sometimes when i try to skip, i

  • Backend order entry auto populate address fields

    hello Guys, we are getting orders by phone that i enter manually through the admin section of BC. the customers have accounts with with their contact details saved. until now i have been manually entering the delivery details on each order. is there

  • Cannot Launch .app from within Acrobat/Reader

    I made a software program that runs in/from Adobe. I burn it to DVD and sell it. Our PC users are fine, but our Mac users are having trouble. Within the program, there is a link/action set to "Open a File". The "file" is actually a Filemaker Runtime.

  • Suddenly no sound on hp envy 14

    I was playing music and out of the blue it stopped. I thought maybe itunes was having a problem, so I tried youtube and had no luck. I updated my computer, checked that the sound was up, and restarted it but nothing worked. Can anyone help?