Report MIB file errors

Where do I report MIB file errors?  The current v2.tar.gz contains the following:
guru$ snmptranslate
Did not find 'cldRegulatoryDomain' in module CISCO-LWAPP-DOT11-MIB (/usr/share/snmp/mibs/Cisco/CISCO-LWAPP-AP-MIB)
Did not find 'CtsSgaclMonitorMode' in module CISCO-TRUSTSEC-TC-MIB (/usr/share/snmp/mibs/Cisco/CISCO-TRUSTSEC-POLICY-MIB)
Did not find 'UnicastRpfType' in module CISCO-IP-URPF-MIB (/usr/share/snmp/mibs/Cisco/CISCO-DYNAMIC-TEMPLATE-MIB)
Did not find 'UnicastRpfOptions' in module CISCO-IP-URPF-MIB (/usr/share/snmp/mibs/Cisco/CISCO-DYNAMIC-TEMPLATE-MIB)
Did not find 'cldcClientAccessVLAN' in module CISCO-LWAPP-DOT11-CLIENT-MIB (/usr/share/snmp/mibs/Cisco/CISCO-LWAPP-SYS-MIB)
--sk
Stuart Kendrick
FHCRC

Hi Vlad,
So, a few times a year, I grab the latest MIB file collection from ftp.cisco.com/pub/mibs and update my network mgmt stations.
In the current collection, some MIB files reference Object Values which are not defined anywhere, as you have noted.
For example, in the IMPORTS section of CISCO-LWAPP-AP-MIB, I see:
    cldRegulatoryDomain
        FROM CISCO-LWAPP-DOT11-MIB
But nowhere in CISCO-LWAPP-DOT11-MIB (nor in any other MIB file included in v2.tar.gz) is cldRegulatoryDomain defined
Now, I can comment out this import and get past this issue ... while CISCO-LWAPP-AP-MIB imports cldRegulatoryDomain, nowhere does it actually /use/ it ... so commenting out the import has no impact.
However CtsSgaclMonitorMode is used a /lot/ in CISCO-TRUSTSEC-TC-MIB ... and commenting out all those occurrences is a bit of a bear (CISCO-TRUSTSEC-TC-MIB tries to IMPORT it from CISCO-TRUSTEC-POLICY-MIB, which doesn't contain it ... )
Nothing new here -- I've been doing this for years, and each time I download v2.tar.gz, I find errors, which I either fix or dodge around ... but this time, the extent of these errors is slowing me down more than usual, so I figured I'd post here and see if I can find a longer term fix, or at least a way to help out by reporting what I find.
Your thoughts on how I might proceed?
--sk

Similar Messages

  • LMS 4.1 error unable to load the MIB file

    when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI
    I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my
    Thank

    The following thread has RFC-1212.my in it. You can downlaod from there :
    https://supportforums.cisco.com/thread/174886
    Mostly all the Cisco MIB will be available @ :
    ftp://ftp.cisco.com/pub/mibs/v1/   OR ftp://ftp.cisco.com/pub/mibs/v2/
    The above you requested are non-cisco mib, which can be extracted either from RFC or they canbe found in some univerisites FTP or some free sites like oidview :
    http://www.oidview.com/mibs/detail.html
    -Thanks
    Vinod

  • Rep-0118:Unable to create temporary file error in Report Builder

    I have installed Report Builder (latest edition) for windows 2000 server, but my users on windows XP cannot create the report it gives them
    Rep-0118:Unable to create temporary file error
    Please help me out
    Vijay

    You have to change registry settings by going through REGEDIT. Under hkey_local_machine/software/oracle/<oracle home>, look for variable REPORTS_TMP. Change value for this, for example c:\windows\temp or something like that where you want oracle reports to create temp files.

  • The report terminated with error:  REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

    Hi,
    I'm getting the below error for reports.
    The report terminated with error:
    REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
    When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
    found below
    ==================================================
    Reports Servlet Environment Variables 11.1.1.4.0
    Security Mode Non-secure
    HTTP Environment Variables 11.1.1.4.0
    SERVER_NAME   09.14.4.41
    SERVER_PORT   8888
    SCRIPT_NAME   /rwservlet
    SERVER_PROTOCOL   HTTP/1.1
    SERVER_SOFTWARE   undefined
    GATEWAY_INTERFACE   undefined
    SERVER_PORT_SECURE   undefined
    ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
    REQUEST_METHOD   GET
    REMOTE_HOST   test-wam-app
    REMOTE_ADDR   09.14.4.41
    REMOTE_USER   undefined
    AUTH_TYPE   undefined
    PATH_INFO   showenv
    QUERY_STRING   server=RptSvr_test-wam-app_wamtest
    PATH_TRANSLATED   undefined
    CONTENT_LENGTH   undefined
    CONTENT_TYPE   undefined
    AUTHORIZATION   undefined
    USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
    REMOTE_IDENT   undefined
    REFERER   undefined
    Oracle Reports Services - Servlet Environment Variables  Select to jump to the top of the page  Return to Top
    KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
    DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
    SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
    server   rep_wls_reports_test-wam-app_wamtest1
    DIAGNOSTIC   yes
    ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
    SERVER_IN_PROCESS   yes
    COOKIEEXPIRE   30
    ENCRYPTIONKEY   reports9i
    DIAGHEADTAGS   undefined
    DIAGBODYTAGS   undefined
    HELPURL   undefined
    RELOAD_KEYMAP   undefined
    IMAGEURL   http://09.14.4.41:8888/reports/rwservlet 
    SINGLESIGNON   no
    Oracle Reports Services - Server and Engine Environment Variables  Select to jump to the top of the page  Return to Top
    PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
    DISPLAY  
    LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
    ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
    TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
    NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
    USER_NLS_LANG  
    RW   /u01/wamtest/FMW_11.1.1/apphome/reports
    REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
    REPORTS_TMP   /tmp
    REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
    java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
    sourceDir  
    tempDir  
    useDataCache  
    ignoreDataParameter
    =========================================================================
    ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
    Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
    Reports server is up though without any issues.
    Regards,
    Djay

    Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
    E.g.
    report=<reports directory>/test2.rdf

  • CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

    I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
    workshop)
    using the standalone Java Reporting Component (JRC), but I'm getting the exception
    shown below (along with my config and source).
    I'm just wondering at the cause of the exception, because I can successfully deploy
    this code to jboss.
    I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
    /WEB-INF/classes/ folder
    to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
    I consulted the product documentation on the JRC and its tutorials but it has
    me stumped.
    I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
    but I'm looking to do all the coding manually without any of BEA's controls and
    what not.
    Any information would be GREATELY APPRECIATED!!!
    Thanks,
    -Colin
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
    not specified in the configuration file---- Error code:-2147
    215356 Error code name:fileNotOpened
    at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
    Source)
    at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
    Source)
    at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
    Source)
    at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    My EAR file structure is as follows:
    /crystal/ (context)
    /reports/qtrade_sp_listing.rpt
    /crystalreportviewers10/ -- bunch of crystal viewing stuff
    /WEB-INF/classes/CrystalReportEngine-config.xml
    /WEB-INF/lib/ -- bunch of crystal jar files
    My CrystalReportEngine-config.xml is as follows
    <?xml version="1.0" encoding="utf-8"?>
    <CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <keycode>A2960-01C00FA-U700063</keycode>
    </CrystalReportEngine-configuration>
    My relevant Web.xml looks like:
    <web-app>
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>/crystal/crystalreportviewers10/</param-value>
    </context-param>
    <taglib>
    <taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
    <taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
    </taglib>
    </web-app>
    My JSP Page Source:
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
    <html>
    <head>
    <title>Web Application Page</title>
    </head>
    <body>
    <crviewer:viewer
    viewerName="SPListingReport"
    reportSourceVar="_SPListingReport"
    displayGroupTree="false"
    displayToolbarToggleTreeButton="false"
    reportSourceType="reportingComponent">
    <crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
    </crviewer:viewer>
    </body>
    </html>

  • In Adobe premiere elements 12 it wont let me add a m4a file. It says that "the importer reported a generic error". Please help.

    please help, I need to make a video and cant get in my music.

    tuckey2012
    For background information, what computer operating system is your Premiere Elements 12 running on?
    I could ask you for a lot of details to build a troubleshooting plan. However, in this instance with .m4a file and "importer reported a generic error", I am going to cut to what I believe your workflow problem to be.
    You are working with iTunes music. To use them in Premiere Elements (any version), please convert them to .wav file in iTunes.
    To do that....
    a. Open iTunes and go to Music - File Menu/Add File To Library
    b. Edit Menu/Preferences/General and there click on Import Settings
    c. In the Import Settings dialog, go to Import Using and set for WAV Encoder.
    d. OK out of that area.
    In the Music Section/Songs, right click your import, select Create WAV Version
    Then right click the WAV Version, select Copy, and then Paste it to the computer desktop
    from where you import it into Premiere Elements 12 Expert workspace Add Media/Files and Folders/Project Assets
    from where you drag it to one of the audio tracks.
    Please let us know if that works for you.
    Thanks.
    ATR

  • How to open report.pdf file? getting error message file cannot be previewed pdf preview handler

    how can I open a report.pdf file that shows error: file cannot be previewed because of an error w/ pdf preview handler

    Hi pfmercerville,
    If you are running the 64-bit version of Windows 7 (or Vista), you will find that your PDF files do not preview in Windows Explorer as they do in the 32-bit versions. Instead, all you see is a message stating that This file can’t be previewed. To enable this functionality on your 64-bit operating system, follow these steps.
    1. Click the Orb (Start Button).
    2. Go to the Search programs and files textbox and input regedit.
    3. Select regedit.exe from the results.
    4. When the UAC prompt appears, click the Yes button.
    5. In the left pane of the Registry Editor, go to (and select):&#8232;
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA-464D-8880-44885D7DC193}
    6. In the right pane, locate AppID.
    7. Change AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}.
    8. Restart your computer for the change to take affect.
    Regards,
    Rave

  • Generating delimited file from a report in reports 6i gives error rep-1814

    Hi all,
    We are using reports 6i.
    We have a report from which we are trying to generate a delimited file.
    We are encounterign the error REP-1814 The object vertically can never fit.
    After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
    Also we observe dthat this is done using th following command
    set_report_object_property('exp039r', null,
    ' DELIMITER=tab' ||
    'DELIMITED_HDR=no');
    We tried doing that but, it is not working. Is there anything we should do to get it work.
    Thanks and Regards,
    Hima

    See in Forms Forum
    generating delimited file from a report in reports 6i gives error rep-1814

  • "the importer reported a generic error" on a psd file i have been using all day.

    have been editing all day on a 3 minute video for a client, then all of a sudden, a PSD file with several layers for my graphics went off line... nothing else.. just the psd file.
    tried to ReLink but all I get is this
    "the importer reported a generic error"
    I have tried resaving the project as something else and still it wont relink.

    Resave psd file in Photoshop to another name and re-import.
    Replace the psd on the timeline.
    See if that will work.

  • Every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    jade harding
    What version of Premiere Elements are you using on Windows 8.1 64 bit? For now I will assume Premiere Elements 12 in a NTSC set up.
    Your iPhone 5s video is expected to be 1080p @ 30 progressive frames per second? Do you confirm that? Because of the source of your video, it is highly likely that you are dealing with a variable frame rate.
    Please give the following a try to see if you then have an "importable" product to take into Premiere Elements presumed 12/12.1.
    Download and install the free HandBrake program.
    http://handbrake.fr/
    Import your video file into the program.
    Make sure you browse to and set Destination (suggested Desktop location)
    Go to the Video Tab and set
    Video codec = H.264 (x264)
    Frame Rate = 29.97
    put a dot next to Constant for the Frame Rate
    Click on the Start at the top left of the workspace
    Wait for the "Queue Finished" to appear in the progress bar at the bottom left of the workspace.
    Then see if this H.264.mp4 (1920 x 1080 @ 29.97 progressive frames per second file can be imported into Premiere Elements 12 project with a manually set project preset of NTSC/DSLR/1080p/DLSR 1080p30@ 29.97.
    Details for setting manual project preset can be found in
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    The details that I have posted in this reply are customized for Premiere Elements and should work fine for you.
    We will be watching for your results.
    ATR

  • "The importer reported a generic error" when trying to import an After Effects file into Premiere.

    Currently quite new to using both pieces of software - I'm trying to grab a file, either a save or an export, from After effects into Premiere. I've googled around, but I can't find anyone with a similar problem with it being an AE file.
    Just looking for some advice on what to do.

    Okay so I've searched around most of this forum and as much of Google as I could find - I have found similar problems, but nothing exactly the same; and none of the solutions I've found have worked for me. I've seen a lot of people having trouble connecting to the DL server on the file-selection window, but I don't even get that far - an error message just pops up in the middle of my screen - and my error doesn't mention a server, just that it can't connect to AE DL.
    I changed firewall software (which I've wanted to do for months, anyway) and still to no avail.
    As for the "The importer reported a generic error" problem also, I can't find any problems or solutions with After Effects files not being able to be imported.

  • When trying to import music files I get a error message that says "importer reported a generic error" I'm using windows 7, DellPC, installed premiere elements 13 2 days ago. Also when previewing and editing video,screen looks great but when I transfer to

    When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?

    chansen232
    Premiere Elements 13 on Windows 7 (presumed 64 bit).....
    1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
    The following are the instructions for the iTunes converting
    http://support.apple.com/en-us/HT1550
    If any problems with the instructions, please let me know, and I will go through them with you.
    2. How you set up the project and the export settings that you select greatly influence your end product result.
    a. What are the properties of the source media?
    b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
    (If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
    if the fields look grayed out.)
    c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
    customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
    Let us start here and then decide what next.
    Thanks.
    ATR

  • Premiere Pro CC reports "The importer reported a generic error" on import of any files

    Ever since the 30 day trial period of CC ran out I have had huge problems. Premiere Pro will not import any files other than m4v files (from iTunes of all things), reporting a generic error.
    I run on Mac.
    I have already reinstalled everything. Twice.
    This problem has now affected Premiere Pro 6 on my Macbook, which ran just fine until I downloaded CC (against my wishes, by the way - I wanted 6 back on my Pro but no option avaialable.
    Does anyone have any ideas. Way beyond frustrating, especially as 'live help' are completely hopeless.
    Thanks.

    >wanted 6 back on my Pro but no option avaialable
    Are you saying you lost your install discs?
    Or that you purchased by downloading and no longer have the download files?
    If you purchased by download, you may go to your account on the Adobe store and download again
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ

  • Premiere Pro not sending files to After Affects "The importer reported a generic error"

    Hi all,
    I just recently purchased PP & AE CC. putting together my first project on my new laptop and when i go to right click a clip on my Premiere pro timeline and proceed to push "Replace with after effects composition" It swaps to After Effects but nothing loads, i alt tab back to Premiere and it displays me the message "The importer reported a generic error"
    If it's any help the footage is from my A7S filmed in SDXC format. everything works fine within the project. I've tried logging out and in of my adobe account updating restarting etc. had no luck.

    Hi Brandon,
    ascarib wrote:
    After doing the reboot my computer gives me the "You can't use this version of the application "Adobe After Effects CS6" with this version of OS X. Nothing has changed on my computer but it was fine before. What else can we try? Thank you for your patience.
    Make sure that you update After Effects: Can't launch | Mac OS X 10.9 (Mavericks)
    Thanks,
    Kevin

  • Trying to send files to After Effects, keep getting "Importer is reporting a generic error" message?

    I googled around for a solution to this but haven't been able to find anything. Basically exactly what I said in the title is what happens: none of my Premiere projects will let me send anything to After Effects, it just keeps setting off a little box that says "Importer is reporting a generic error" anytime I try. This is frustrating, obviously, as the entire purpose of having all these programs together is to send them back and forth and have everything work in harmony.
    I'm on a Mac, and running CS6 across all aspects of the softwares, I have the Creative Suite, so all of them are the same version of the software.

    Hi DangerusZack,
    Can you try what is suggested in this post? http://forums.adobe.com/thread/1050730?tstart=0
    Thanks,
    Kevin

Maybe you are looking for