Report numbers not matching Essbase

Interesting issue: I have two financial reports - one which pulls the an account value (sales) for products & sub products. the second report shows the YTD totals for these products. The second report is showing incorrect numbers. I compared the numbers in the first report with what is in Essbase and it seems to be reflecting the correct numbers. However, for some reason the numbers are all off on the second report. Any ideas how to troubleshoot this?
And yes - I made sure I was compared the right members from each dimension.
thanks.

Jake,
you are correct, its the YTD values that are incorrect.
The numbers are being calculated in the report itself. This is a planning app, and no dynamic time series has been set up.
I did notice something which I thought was weird. When in workspace, I go to the period dimension through Administration -> Manage Dimensions. I then select say Q1 and click on "options". It shows CURRENT YEAR is set to FY2012. I didn't changed this because the rest of the system seems to be working fine, but just wondering.
Any insight into how you would troubleshoot this would be highly appreciated.

Similar Messages

  • The creditors report is not matching with the G/L account

    Hi Gurus,
    The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
    Please give me advice,
    I will assign points
    Thanks&Regards,
    Kumar

    Hi Kumar,
    There could be three reasons.
    1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
    2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
    3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
    Hope this will help you. If not clear please reply, I will explain you.
    Pl. assign points if useful.
    Thanks

  • Use tax reports do not match

    Use tax reports do not match. One shows the GL account balance using FAGLB03 and the other is the use tax report S_ALR_87012394.  I need to use S_ALR_87012394 to determine the location of the tax and pay it but since it doesnu2019t match with the GL there will be issues.

    Hi,
    Under  these two cases i had found difference between vat reports and vat gl accounts.
    1) When the users are manual input the vat amount on the input invoice , resulting vat amount will be updated on the invoice and gl account BUT not the vat report.To find the these items go to the GL line item report and find the line items with BLANK VAT CODE.usually this will tend to use by the users when there are any rounding differences in the vat calculation. Also to avoid these cases hide the manaul vat amount field blank.
    2) When the users manually inputed the vat amount on the gl accounts, provided GL master are not checked with automatic postings only option.
    Best Regards
    Suresh Addagiri

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • India cash/bank book report is not matching with GL balance

    We have Changed one segment in cash account and cash clearing account for internal petty cash account.
    After changing the segment, Closing balance of India cash/bank book report is not matching with GL balance.
    Please help.
    Regards
    Suresh

    user702249 wrote:
    We have Changed one segment in cash account and cash clearing account for internal petty cash account.
    After changing the segment, Closing balance of India cash/bank book report is not matching with GL balance.
    Please help.
    Regards
    SureshPlease do not post duplicates -- India cash/bank book report is not matching with GL balance.

  • Aging Report does not match Balance Sheet Receivables/Payables Account

    Hi experts,
    I am requesting your help to find out why our customer receivables/vendor payables aging reports total does not match our balance sheet accounts receivable/ accounts payable account for the same period.
    I would expect
    Customer Receivables Aging Report Total = Balance Sheet Accounts Receivables Account
    Vendor Aging Report Total = Balance Sheet  Accounts Payables Account
    Thank you.
    Jane

    When you run the report with an ending/aging date in the past (like the end of last month), if you do not display BP's with zero balances, it will leave out BP's who have a zero balance AT THE TIME YOU RUN THE REPORT.  Some of them may have had a non-zero balance at the end of the month, but they will be left off anyway.  So if a customer owed money on the last day of the month and he paid it on the first of the next month, his balance will not be shown on the report if you run it even one day later.
    I feel this is a design defect in the report, but it is the system behavior.
    Marcia

  • FD10N and FBL5N Reports are not matching

    Hi,
    When i execute FD10N FBL5N reports for customer balance, Both are showing different balances, why they are not matching with each other?
    My FBL5N open item blance is not matching with FD10N.what could be the reason?
    Is there any other report to show customer opening balances other than FD10N?
    thaanks

    Dear Dogdays
    This is selection parameters problems- means please check once again what you selected check boxes  and also check for Dates what you given
    To check both the above cases, FD10N for the year you see the difference. Double click on the balance value for the period where you have seen the difference. The double click will call FBL5N for the period and customer. If the total of the line item report matches the balance in FD10N, then the issue is selection criteria
    Regards
    shankar

  • Sales Analysis report does not match Cost of Sales Account

    My client is running SAP B1 8.81 PL 6.  He has set all items to standard costing method.  He has discovered that the difference between the Sales Amount and the Gross Profit amount on the Sales Analysis report, which should equal the Cost of Sales for the Items, does not match the Cost of Sales G/L account on the P&L report.  If you look at a sample of rows, the above difference divided by the quantity equals the standard cost of the item.  There are no manual journal entries that affect the COS account for the posting period that is being analyzed.  I cannot see any mathmatical difference or problem with the above analysis, nor can I find the problem.  There is about an $85K difference between the reports.  The Sales Amount on the Sales Analysis report matches the revenue account on the P&L to the penny.  Has anyone ever compared these 2 reports?  Thank you for your help.
    Bill Turek

    If you right click on an Invoice and choose "Gross Profit" it will give you a setting on how you want to calculate the Gross Profit for that invoice.
    In the accounting point of view the "Base Price" should be "Item Cost" so that the Gross Profit will be (Net Selling Price - Item Cost = Gross Profit). This will give you the same Gross Profit amount between P and L and Sales Analysis Report.
    However, SAP B1 gives the user the ability to select a different base price other than the Item Cost.
    This gives the user the flexibility for the Sales Report. Example (Net Sales Price - Vendor Sales Price = Gross Profit). People do this sometimes because  the item's cost fluctuates if you use FIFO or average cost and they want a uniform cost to calculate their Gross Profit.
    In summary if the Base Price is not set to "Item Cost" then there will be difference in the Gross Profit between the P and L and Sales Analysis Report.
    See screenshot:
    -Eric Alo-
    B1 Financial Consultant

  • GL Balance Report output not Matching with Material Stock

    Hi,
    Can we Match Reports MB5B (Stock on Posting Date)  and S_ALR_87012301 (G/L Account Balance)???
    Till March these reports are matching but from April 11, data not matching..
    In tcode MB5B, we are looking Valuated Stock of Materials and in tcode s_alr_87012301 showing balances, which were matching earlier..
    Plz guide...

    Dear:
              Execute the stock GL in FS04 to track the history of changes made to it. It is quite possible that post automatically tick was changed and some direct posting were made against this GL which ultimately caused discrepancies. If track is showing post automatic tick changed then it means some direct posting were made to it, Note the period in which it was changed and analyze the posting against this GL in that time span.
    Regards

  • KE5Z report and plant wise sales report (Z report develped) not matching

    thanks for support
    could any body tell me in report KE5Z (proft center actual line items) .profit center wise sales is not matching
    with plant wse sales  Z report developed (based on plant - plant wise sales ) In MM01 master data maintenance  we have tagged every plant to a profit center , becoz of this mapping these report should match ? but big differnce is coming?

    Hi,
    Check on it:-
    Missing Data in the KE5Z report
    Regarding reports KE5Z &  S_ALR_87013326
    http://wiki.sdn.sap.com/wiki/display/ERPFI/KE5Z-Additionaltextfields+missing
    pherasath

  • Service Level Report values not matching to Service Level Dashboard v 2.0 values

    Hi Experts,
    We have installed SLD v2 on a development SQL server along with WSS 3.0. The SLD is pointed to the SCOM datawarehouseDB to collect the information to have it up in the dials.
    We have SCOM 2007 R2 who's OpsMgrDB and OpsMgrDWDB are hosted on a SQL 2008 R2 instance.
    I have created the Distributed application and added 3 Service level Tracking to it. 
    Availibility
    Processor Utilization
    Memory Utilization
    The problem here i am facing is that the values in the dials on the SLD Home sites do not match with the values i get when i run the report for  Service Level Tracking Summary under reporting tab in Ops
    Console.
    What could be probable reason for this ?
    Regards,
    Prajul

    Hello,
    Here are some articles related to this issue. Hope they are helpful.
    Running a Service Level Tracking Report
    http://technet.microsoft.com/en-us/library/hh212726.aspx
    Generating a Service Level Tracking Report
    http://technet.microsoft.com/en-us/library/dd441422.aspx
    The Service Level Tracking Summary Report in System Center Operations Manager 2007 may be empty if TODAY is not selected for the TO date
    http://support.microsoft.com/kb/2567404/en-us
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SAP BI Report : Total not matching

    Hi,
    We have one report in BI, the total (Given by BI system i.e system generated) for the values of the key figures is not matching with actual total of that values...
    I am confused to see, how sap BI can do the totaling mistake...
    Please suggest and help....

    Hi,
    check whether u have given any filter conditions on the query.
    (or) check whether the records are < 65,535.(since in bex 3.5 the maximum length is 65535).
    if everything is ok in report, check the result in the data target itself,by locating file using spread sheet into the system.if the result in data target is same with ur result, the there may be the problem with ur query( create again ).
    If not so the data is not loaded properly into ur data target.
    Thanks
    Sai Chand

  • Actual cost value in report CJI3 & s_alr_87100185 report is not matching

    Hi,
    We are executing the report CJI3 & s_alr_87100185 for month of December.
    Values in the both reports are not getting matched.
    Please help me...
    Regards,
    Pradip Shelke

    Dear Sam
    While using the standard report CJI3 - Project Information System - Actual Cost, choose the column "Business Transaction" and apply a filter for "Not Equal To" KOAO - Settlement.
    It will display only the actual cost for the project excluding the settlement line items.
    Hope this helps...
    Regards
    Kaashif M

  • Numbers not matching

    I'm trying to match my numbers with R/3 through ME81 for Net Order Value but they are not matching. I made sure that i'm using the right time references also. I also tried to match by individual company codes but no luck. The difference is small but it shouldnt be. What can i do ?

    Hi Experts,
    I have the same issue. except that in ME81N the variance is huge(in millions) compared to MCE3 or BI. I gave the same selection as well so not too sure whats going on. according to (Note 1024320 - Consulting note - Purchasing Information System) there can be a difference between "net order value" in ME81N and MCE3 which gives "effective order value". However i do not think it can be such a huge difference.
    would appreciate any help you could give me. Also the parameters i put into ME81N are basically by document date and document type NB. is there some other parameter i need to put in?
    thanks and regards
    dilanke

  • Investment order reporting does not match with AM

    Hello,
    We are exectuing two reports 1) internal order report( for investment order) and asset history sheet.
    Both the report figures should match. but due to some reason the internal order report shows less value than asset history sheet.
    What can be the possible reason for the differences.
    BR,
    Zulfikar

    Hi
    Check whether the sales order creation date and actually when you created the delivery ? if say u created the sales order yesterday with yesterday date as delivery date and carried out delivery process to day means. The delivery date in the delivery process will be today date in that case delivery date wont match with sales order. This is one case like that so many cases are there.
    Material might not be confirmed etc....
    Regards,
    Mullai

Maybe you are looking for

  • Installing Adobe Creative Suite 5 Design Premium on to my Apple laptop??

    Hi I need help installing my adobe suite program!! I purchased the Adobe Creative Suite 5 design premium program a few months ago last year. I need to know if, I Can install this program on to a Apple MacBook Pro laptop computer if, this program is f

  • Itunes stops working when I try to upload CD

    Itunes stops working when I go to type in info on audio cd file prior to download

  • How to attatch a pdf file to mail

    Hi all, I am working on mail sending functionality using "mailto" command. I am adding the code below: <html> <head> <title></title> </head> <body> <form action='mailto:[email protected]?subject=Test mail' method="post" enctype="multipart/form-data">

  • Speeding Up File Transfer on Time Capsule?

    I just bought the 2TB time capsule.  I would like to transfer my iPhoto Library to the TC but for 117 GB it is telling me that it will take 120+ hours to complete.  It appears to be transferring data at about 1KB every 15 seconds.  I have a MacBook P

  • Premiere Pro/Audition cs5.5

    When I start Audition or open a video footage in Premiere Pro - I got a Runtime Error message. I have tried to re-install - but nothing helps.